AIM SPORTS HARRIS BIPOD ADAPTOR FOR PICATINNY / WEAVER

  AIM SPORTS Spring tension Harris Style bipod for quick target shooting. Locks securely with multiple points of adjustment, and clamps to the common sling studs on most sporting rifles. An additional sling stud is integral with the design, allowing the shooter to use their sling. Compatible Picatinny Adapter see under this article, accessoires. Adjustable from 6.5" - 9" Picatinny / Weaver Adapter included Mounts directly to sling swivel stud Spring-loaded, telescoping legs adjust quickly Won't change zero Made of aluminum and high carbon steel Black hard anodized finish

  Leichtgewichtiges Bipod, kompatibel zu allen Schusswaffen mit Riemenösenaufnahme oder Adaptern mit Riemenösenaufnahme. The Magpul Bipod – Sling Stud QD offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just 13 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

  Lightweight bipod, compatible with firearms with a sling stud or adapters with a sling stud. NOT compatible with Picatinnyrails or 1913 Rails. Compatible accessories see under this article, accessories. The MOE Bipod is the latest, lightest, and strongest bipod in the Magpul Bipod line. At 8oz total weight, it’s almost 40% lighter than some of our existing bipods. That decrease in weight doesn’t cost you when it comes to strength and reliability; our injection-molded, proprietary polymer legs won’t deform or break under pressure, providing a consistently stable platform to shoot from, shot after shot after shot. Designed to mount to the popular Uncle Mike's Sling Swivel Stud, the MOE bipod attaches and detaches quickly and easily thanks to its rapid-attach sling stud mounting system. The self-locating, stainless-steel clasps ensure perfect alignment when mounting, and the large ergonomic thumbwheel allows for a strong grip and easy tightening. The non-marring, over-molded saddle fits securely on most forends, providing ideal load distribution without leaving a mark on your rifle. Adding an optional low-profile sling stud on the rear of the mount retains the ability to mount a sling to the forend of the rifle. With its low stack height of 1.73” when folded, the MOE Bipod is streamlined and stays out of the way until it’s needed. The legs stow neatly forward and deploy without buttons or levers, snapping down and locking into position. The legs extend from 7 to 10 inches and slide and lock securely with the push of a button on seven, ½-inch spaced, locking detents. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces. They’re also easily removed with a roll pin punch should users choose to change feet, and the legs accept most Atlas-pattern bipod replaceable feet.   MADE IN THE USA

  AIM SPORTS Spring tension Harris Style bipod for quick target shooting. Locks securely with multiple points of adjustment, and clamps to the common sling studs on most sporting rifles. An additional sling stud is integral with the design, allowing the shooter to use their sling. Compatible Picatinny Adapter see under this article, accessoires. •  Adjustable from 9.5" - 15" •  Mounts directly to sling swivel stud •  Spring-loaded, telescoping legs adjust quickly •  Won't change zero •  Made of aluminum and high carbon steel •  Black hard anodized finish

  Leichtgewichtiges Bipod, kompatibel zu allen Schusswaffen mit Riemenösenaufnahme oder Adaptern mit Riemenösenaufnahme. The Magpul Bipod – Sling Stud QD offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just 13 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

  Lightweight bipod, compatible with firearms with a sling stud or adapters with a sling stud. NOT compatible with Picatinnyrails or 1913 Rails. Compatible accessories see under this article, accessories. The MOE Bipod is the latest, lightest, and strongest bipod in the Magpul Bipod line. At 8oz total weight, it’s almost 40% lighter than some of our existing bipods. That decrease in weight doesn’t cost you when it comes to strength and reliability; our injection-molded, proprietary polymer legs won’t deform or break under pressure, providing a consistently stable platform to shoot from, shot after shot after shot. Designed to mount to the popular Uncle Mike's Sling Swivel Stud, the MOE bipod attaches and detaches quickly and easily thanks to its rapid-attach sling stud mounting system. The self-locating, stainless-steel clasps ensure perfect alignment when mounting, and the large ergonomic thumbwheel allows for a strong grip and easy tightening. The non-marring, over-molded saddle fits securely on most forends, providing ideal load distribution without leaving a mark on your rifle. Adding an optional low-profile sling stud on the rear of the mount retains the ability to mount a sling to the forend of the rifle. With its low stack height of 1.73” when folded, the MOE Bipod is streamlined and stays out of the way until it’s needed. The legs stow neatly forward and deploy without buttons or levers, snapping down and locking into position. The legs extend from 7 to 10 inches and slide and lock securely with the push of a button on seven, ½-inch spaced, locking detents. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces. They’re also easily removed with a roll pin punch should users choose to change feet, and the legs accept most Atlas-pattern bipod replaceable feet.   MADE IN THE USA