ANDERSON AM-15 A2-OR Carbine 7,62X39 16" Complete Upper

  Need a 7.62×39 AR magazine that performs flawlessly? Our engineers have made crucial discoveries and technological advancements that solved the challenge of reliable feeding of Soviet cartridges in AR platforms.  Make the switch to DURAMAG and shoot worry free with every pull of the trigger. The 7.62×39 DURAMAG SS™ magazines are the ultimate choice for running this caliber in any AR15 style firearm. Feeding tapered cases like the 7.62x39mm into the straight magazine well of the AR platform has never been easy. Until DURAMAG™, many thought the combination was simply not possible to produce reliably. Thanks to extensive quality control built into their designs, every magazine is sure to run flawlessly. With DURAMAG SS™, now you can finally enjoy the close-in power of 7.62x39mm reliably in your AR platform. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 30 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Anti-tilt AGF follower Compatible with AR-15 models & Clones in caliber 7.62x39  MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Single plane front sight for use with standard height AR-15 rear sights. Locks positively in the up position. Details:•  High quality Low Profile Battle Front Sight•  Black anodized aircraft grade aluminum•  Ball bearing pivot detent•  Automatically locks into position when raised•  Flip-up posi-lock design to guarantee zero•  Quick detachable with adjustable A2 square post•  Uses standard A2 sight post•  Same plane hand guard / upper receiver height•  Compatible accessories, see under this article, accessories

   Replacement Bolt Rehab Kit, only for AR-15 7.62x39 caliber. 7.62 Extractor NOT compatible to 5.56/.223 Rem or .300 BLK.  Bolt Rehab Kit Included: Firing Pin 7.62 Extractor Gas Ring 3pcs Ejector spring Extractor pin Extractor spring Extractor spring O ring Extractor spring buffer Ejector Ejector roll pin  100% AMERICAN MADE. 100% ANDERSON.

  Kompatibel zu allen AR-15/M16 im Kaliber 7,62x39, hervorragende Qualität, Material: Karbonstahl, QPQ beschichtet. 30 Round Carbon Steel Nitrocarburized (QPQ) Hostile Environment Finish 17-7PH Spring for Ultimate Protection Against Corrosion D&H Proprietary Limited Tilt Follower for 7.62 x 39 Cartridges Use With AR15, M16, and M4 Rifles MADE IN THE USA

  Need a 7.62×39 AR magazine that performs flawlessly? Our engineers have made crucial discoveries and technological advancements that solved the challenge of reliable feeding of Soviet cartridges in AR platforms.  Make the switch to DURAMAG and shoot worry free with every pull of the trigger. The 7.62×39 DURAMAG SS™ magazines are the ultimate choice for running this caliber in any AR15 style firearm. Feeding tapered cases like the 7.62x39mm into the straight magazine well of the AR platform has never been easy. Until DURAMAG™, many thought the combination was simply not possible to produce reliably. Thanks to extensive quality control built into their designs, every magazine is sure to run flawlessly. With DURAMAG SS™, now you can finally enjoy the close-in power of 7.62x39mm reliably in your AR platform. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Anti-tilt AGF follower Compatible with AR-15 models & Clones in caliber 7.62x39  MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 30 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - OD Green T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 30 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - Gray T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  The classics simply never die and M81 will always be an all time favorite. These mags are the first in our new series of pattern anodized magazines that applies the exact and true pattern as a full hardcoat anodize into the material. No corners have been cut, no sacrifices have been made. Immaculate drip and top teir performance all in one package. it's just how we do things. Just like true M81 Woodland textiles we also took great care that these mags are all somewhat unique as if they were cut from a large roll of fabic and assembled together. DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 30 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - M81 Woodland T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  Hard-hitting calibers demand serious magazines. DURAMAG SS® SR25 pattern mags are made from a single piece of laser-welded 410 Stainless Steel and protected with T-360®- applied coating. This is a magazine that can truly withstand the test of time, and hard use. C Products Defense took great care to design this magazine to be the best option for precision shooters but also for heavy full-auto use. Precision shooters will enjoy a a beautiful COAL of 2.87" for their long-range shooting while knowing that their magazine will also feed as fast as needed, every time. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 5 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Controlled-tilt AGF follower  Compatible with AR-10 models in caliber 7.62 NATO / .308 WIN / 6.5 CREEDMOOR / 6.8x51 Compatible with ARMALITE AR-10® A-SERIES, KNIGHTS ARMAMENT, ROBINSON ARMAMENT, MOSSBERG MVP®, RUGER RPR etc. MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Need a 7.62×39 AR magazine that performs flawlessly? Our engineers have made crucial discoveries and technological advancements that solved the challenge of reliable feeding of Soviet cartridges in AR platforms.  Make the switch to DURAMAG and shoot worry free with every pull of the trigger. The 7.62×39 DURAMAG SS™ magazines are the ultimate choice for running this caliber in any AR15 style firearm. Feeding tapered cases like the 7.62x39mm into the straight magazine well of the AR platform has never been easy. Until DURAMAG™, many thought the combination was simply not possible to produce reliably. Thanks to extensive quality control built into their designs, every magazine is sure to run flawlessly. With DURAMAG SS™, now you can finally enjoy the close-in power of 7.62x39mm reliably in your AR platform. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 5 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Anti-tilt AGF follower Compatible with AR-15 models & Clones in caliber 7.62x39  MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Need a 7.62×39 AR magazine that performs flawlessly? Our engineers have made crucial discoveries and technological advancements that solved the challenge of reliable feeding of Soviet cartridges in AR platforms.  Make the switch to DURAMAG and shoot worry free with every pull of the trigger. The 7.62×39 DURAMAG SS™ magazines are the ultimate choice for running this caliber in any AR15 style firearm. Feeding tapered cases like the 7.62x39mm into the straight magazine well of the AR platform has never been easy. Until DURAMAG™, many thought the combination was simply not possible to produce reliably. Thanks to extensive quality control built into their designs, every magazine is sure to run flawlessly. With DURAMAG SS™, now you can finally enjoy the close-in power of 7.62x39mm reliably in your AR platform. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 28 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Anti-tilt AGF follower Compatible with AR-15 models & Clones in caliber 7.62x39  MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Simply put, you’ve just found your new favorite mag for your 6.5 Grendel and 6mm ARC firearms. With the 6.5 Grendel DURAMAG SS™ line of magazines, feeding your 6.5 /6ARC / 22ARC has never been easier. These specialty cartridges demand a proprietary magazine and the DURAMAG SS™ delivers one that outperforms the competition while remaining affordable. These magazines offer fantastic internal room for long cartridge loads, so you can get the most from this caliber. These DURAMAG SS™ magazines also boast extremely easy loading and feeding first-to-last round. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 5 round Best Performing Mag on the Market Extremely Compact Full Two Stage Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Blue Anti-tilt AGF follower Compatible with AR-15 models in caliber 6.5 GRENDEL / 6MM ARC / 22ARC MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  The .458 SOCOM DURAMAG SS™ is a purpose built .458 magazine right from the factory designed to be a no hassle solution to feeding these large caliber cartridges. Combining DURAMAG’s T-360™ coating with a single stack ADVANCED GEOMETRY FOLLOWER™ and a big bore specific EVERFLEX™ spring, these magazines will be your go-to. Do yourself a favor and get an American-made .458 DURAMAG™ built for one job: to feed 10 big-bore rounds properly every time. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Anti-tilt AGF follower Compatible with AR-15/M4 models in caliber .458 SOCOM  MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  DURAMAG™ set out to re-design and perfect the Colt pattern 9mm magazines for the AR-15. With the DURAMAG SS™ you can feel confident that it will feed the widest variety of 9×19 ammunition, even defensive hollow points and heavy sub-sonic loads. 9mm AR-15 magazine have always been notoriously stubborn to load, but loading the last round is just as easy as loading the first round with a DURAMAG™ SS. Other magazines fail when filling to capacity: DURAMAG™ will outlast and outperform all others, first round to last.  The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Orange Anti-tilt AGF follower Compatible with AR15/Colt pattern Style models, bolts & Clones in caliber 9x19/9mm Luger MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  AR-15 / M4 flip up rear sight with locking feature. Dual aperture for long and short range operation. •  High quality Low Profile Battle Rear Sight•  Black anodized aircraft grade aluminum•  Ball bearing pivot detent•  Automatically locks into position when raised•  Flip-up posi-lock design to guarantee zero•  A2 style dual aperture•  0.65 MOA on M-4 type rifles•  0.49 MOA on A-4 type rifles•  Compatible accessories, see under this article, accessories

  Kompatibel zu allen AR-15/M16 im Kaliber 7,62x39, hervorragende Qualität, Material: Karbonstahl, QPQ beschichtet. 10 Round  Carbon Steel Nitrocarburized (QPQ) Hostile Environment Finish 17-7PH Spring for Ultimate Protection Against Corrosion D&H Proprietary Limited Tilt Follower for 7.62 x 39 Cartridges Use With AR15, M16, and M4 Rifles MADE IN THE USA

  Supplying Allied Armed Forces and International Police for 25 Years. D&H Tactical metal-bodied AR15 magazines have become the trusted brand at the firing range, in competition, in the field, and the woods. Each magazine is built in the USA to the most demanding military specification and crafted from the finest grade materials. You can count on D&H Tactical magazines to stand up to the elements and deliver precise performance on demand. These BLACK Teflon No-Ban (30 round) magazines are considered some of the BEST AR15, M4, M16 magazines made. Current production. Teflon finish is on the interior and exterior of magazine to aid insertion and feeding.   They have the MAGPUL® ENHANCED Followers. The new Teflon Mags do not come in a plastic wrap. These magazines come stamped with the date of manufacturer on left side of magazine body and the contractors government CAGE code (04TQ4 - D&H Industries) on right side of magazine body.  Compatibel to AR-15/M16 in caliber 5.56x45mm/.223 Rem SPECS 30 Round Capacity  Heat Treated Aircraft Aluminum Black Teflon – Hard Coat Anodized 17-7PH Spring for Ultimate Protection Against Corrosion Magpul™ Anti-Tilt Follower Use With AR15, M16, and M4 Rifles MADE IN THE USA 

  Supplying Allied Armed Forces and International Police for 25 Years. D&H Tactical metal-bodied AR15 magazines have become the trusted brand at the firing range, in competition, in the field, and the woods. Each magazine is built in the USA to the most demanding military specification and crafted from the finest grade materials. You can count on D&H Tactical magazines to stand up to the elements and deliver precise performance on demand. These GRAY Teflon No-Ban (30 round) magazines are considered some of the BEST AR15, M4, M16 magazines made. Current production. Teflon finish is on the interior and exterior of magazine to aid insertion and feeding.   They have the MAGPUL® ENHANCED Followers. The new Teflon Mags do not come in a plastic wrap. These magazines come stamped with the date of manufacturer on left side of magazine body and the contractors government CAGE code (04TQ4 - D&H Industries) on right side of magazine body.  Compatibel to AR-15/M16 in caliber 5.56x45mm/.223 Rem SPECS 30 Round Capacity  Heat Treated Aircraft Aluminum Gray Teflon – Hard Coat Anodized 17-7PH Spring for Ultimate Protection Against Corrosion Magpul™ Anti-Tilt Follower Use With AR15, M16, and M4 Rifles MADE IN THE USA