ANDERSON AR15/M16 AR10 Buffer Tube Carbine Length MIL-SPEC

   Premium military equipment from the BRAVO COMPANY SPECS - MIL-SPEC Quality - Compatible to AR15, M4, AR10 Buffer Tubes - As with all BCM® Life Saving Tools®, Made in the U.S.A. - Compatible accessories see under this article, accessories MADE IN THE USA

  The Magpul BTR is an AR arm brace designed to improve the single-handed employment of large-format pistols. The BTR utilizes Magpul design and engineering to offer a stabilizing accessory with a robust feature set and trusted Magpul quality.  With classic Magpul aesthetics, the BTR is compatible with Mil-Spec carbine receiver extensions and employs a simplified, durable, and easy to use adjustment mechanism. An integrated QD cup and M-LOK compatible slot provide ambidextrous sling mounting options and enable stabilizing sling tension to be applied, drastically increasing single-handed control of the firearm. With a straight-forward design and Magpul innovation, the BTR is a simple solution to improving your AR pistol. IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firing M-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment MAG1079 BTR Arm Brace Installation Instructions BTR Arm Brace FAQ  TECHNICAL SPECIFICATIONS  More Information Platform AR15, M4 Compatibility Mil-spec sized carbine receiver extension equipped AR Pistols. Not compatible with proprietary, pistol, or commercial-spec receiver extensions. All ATF, NFA, state and local rules and laws apply, where applicable. Other Specs Legal Disclaimer: This product is designed and intended to be employed for lawful uses in accordance with all applicable laws and must be assembled into a legal configuration. ATF has ruled that attaching stabilizing braces with certain features will not make a firearm NFA controlled. This product conforms to this ATF precedent. As of December 10, 2019, ATF is no longer issuing classification letters for firearm accessories, including stabilizing braces. This product is designed and intended to serve only as a forearm brace for one-handed firing of a pistol. It is not intended to be fired from the shoulder. Any redesign or reconfiguration of this product may render the attached firearm NFA controlled. The user is exclusively responsible for determining the correct application of state and federal law based on the unique configuration of each firearm. MADE IN THE USA

  Strike Industries drop-in replacement buttstock for AR/15/M16 carbine using mil-spec sized receiver extension tubes. The MOD1 stock integrates features sought by military professionals and firearms enthusiasts around the world. Strike Industries came up with a lighter, compact buttstock, at an even more attractive price point.  Package includes1x MOD1 Stock  Product Spec- Length: 7.47”- Width: 1.74” @ QD cups- Height: 4.45”- Weight: 6.6 oz *For Mil-spec sized buffer tubes only Features- Slide on replacement for factory collapsible butt stock.- QD sling mounting points integrated on both sides in positions for optimum usage. - Enhanced cheek weld- Easy to replace and quick to install- Designed for use with and without rubber buttpad- Length of pull (LOP): 11.25″ to 14.25″ Mod- Buttpad Sold Separately: The Strike Industries Rubber Butt Pad is a drop in add on for the Mod1 Stock system.  The lightweight, slim profile enhances control and usability of the stock without dramatically increasing weight or bulk.  At only 0.36” in thickness, the butt pad doesn’t sacrifice the minimalist nature that the stock is known for while at the same time its flexibility offers some level of recoil attenuation.  The hybrid construction of impact resistant TPE integrated on a rigid polymer frame combines strength and resilience to provide the best of both worlds in creating the best possible shoulder weld. Features- Drop-in installation- Slim Profile- Enhanced Control- LightweighTMADE IN THE USA

   JP Custom Centerless Ground and Polished Operating Spring For Caliber. .223 | 5.56| .300 BLK| 7.62X39 For Small-Frame Buffer Tubes - Carbine Length Stainless Steel Polished Compatible accessories, see under this article, accessories Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Not for use in .308 AR-type rifles. MADE IN THE USA

  Mil-Spec Receiver Extension Lock Nut (Castle Nut) For use on AR15 carbines with an adjustable stock. Perfect for your new build or as a direct replacement for worn out parts.  SPECS - MIL-SPEC Quality - Compatible to AR15, M4, AR10 Buffer Tubes - Compatible accessories see under this article, accessories MADE IN THE USA

  The RB5015HD is a specially engineered Heavy Damped KynSHOT for the 9MM PCC application. Designed in cooperation with Blitzkrieg Components, LLC. to work for 9MM applications with barrels 8” or greater, either suppressed or unsuppressed and with any type of ammo. Compatible to Carbine Length Buffer Tubes Compatible to 9mm Standard Blowback Systems ** Use the SPRINCO 25004 9mm Extra Power Buffer Spring RED for optimal performance ** NOT compatibel to CMMG's 9mm Radial Delayed Blowback System, use RB5000HP for trouble-free operation! The hydraulic fluid and seals are made to meet mil- spec requirements and have an ambient temperature operating range of -30F to +150F. The KynSHOT uses patented hydraulic shock absorption technology to dampen the impact of the bolt at the rear of its travel and to dampen the forward impact of the buffer’s weight as it chambers the next round. Its weight and length have been optimized for the 9MM application so that it runs reliably, softens recoil, smooths out the action, and stops just behind the bolt catch. (ECCN Controlled). Compatible accessories see under this article, accessories.  FAQ / Frequently Asked Questions What is the difference between RB5007 and RB5015HD? The RB5007 is our standard damped PCC buffer which is used for direct blowback PCC’s that have a barrel length of less than 8”. The RB5015HD is designed for all suppressed PCC’s or barrel lengths that range greater than 8”. The reason why we have two PCC buffers is because you add a suppressor or longer barrel to the PCC the bolt cycles much harder than shorter barrels. The RB5015HD is also a perfect choice for other PCC calibers such as the .40SW, .45ACP, and 10mm. The RB5015HD has enhanced damping than the RB5007. BENEFITS  Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS  Weight: 6.0 Ounces. Length when Compressed: 3.90” Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F to 150F High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion. Compatible accessories see under this article, accessories  MADE IN THE USA

 Der MAGPUL MOE SL-K Drop-In Einsatzschaft für AR-15 / M16-Karabiner wurde entwickelt um den Strapazen des modernen Schlachtfelds standzuhalten. Der schlanke Schaft verfügt über eine schräge Wange für einen festen Sitz und verbessert den Benutzerkomfort. Der beidseitige Entriegelungshebel ermöglicht einfache Einstellungen und ist so eingestellt, dass sie nicht mit der Kleidung daran hängenbleiben. Erstklassige Chrom-Silikon-Verriegelungsfeder gewährleistet eine lange Lebensdauer des Buffer-Tube und eine lange Lebensdauer des Schafts. Die interne anti-rattle-Funktion sorgt für einen festen Sitz, um ein Wackeln am Buffer-Tube zu minimieren. Der SL-K Schubschaft von MAGPUL ist der perfekte Einsatzschaft für PCC, IPSC, auch bestens geeignet in Kombination mit Ausrüstung und Plattenträgern. A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*. 100 % Made in U.S.A. FEATURES •Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others •Sloping cheek weld combines a slim profile with user comfort •Dual-side release latch provides easy adjustment while remaining anti-snag •Premium chrome-silicon lock spring provides positive locking and long service life •Compact rubber butt-pad offers an anti-slip surface and increases impact protection •Rollover on the toe allows for easier shoulder transitions and better fit when using body armor •Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments •1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)   NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube. SPECIFICATIONS** MOE SL-K Carbine Stock, Mil-Spec •Weight: 7.9 oz. •Weight, w/receiver extension: 11.9 oz. •Length, max: 6.5 in. •Height, max: 4.2 in. •LOP Adjustment Range: 3.3 in. •LOP, M4 Collapsed: ~10.3 in. •LOP, M4 Extended: ~13.6 in. * Performance dependant on the host receiver extension's dimensional tolerances.  ** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

  The KynSHOT RB5000HP Recoil Buffer is designed for over gassed AR-15 carbines or CMMG's 9mm Radial Delayed Blowback System or "Thumpers" like the .50 Beowulf or .458 SOCOM .   Compatible to Carbine Length Buffer Tubes Compatible to CMMG's 9mm Radial Delayed Blowback System Designed for hard cycling AR15 calibers like .223/5.56mm .450 Bushmaster, .300 BLK, 7.62x39, 6.8 SPC, 6.5 Grendel, 7.62x40 Wilson, .204, .350 Legend, 458 SOCOM etc. NOT compatibel to 9mm Standard Blowback Systems, use RB5007, RB5015HD or RB5020SS for trouble-free operation! Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. (ECCN Controlled). Compatible accessories see under this article, accessories.  BENEFITS  Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS  Weight 4.8 Ounces Length when compressed 3.25” Designed for hard cycling .223/5.56mm AR15 Carbines Can be used on multiple AR15 calibers Can be used in CMMG radial delayed blowback systems, For 9mm direct blowback standard systems please use KynSHOT P/N .RB5007, RB5015HD or RB5020SS Mil-Spec Hydraulic Fluids and Seals- Ambient operating temp certified for -30F - +150F High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion. Compatible accessories see under this article, accessories  MADE IN THE USA

  High quality Castle Nut, compatible with all AR-15/AR-10 MIL-SPEC and COM-SPEC buffer tubes.  

  Extra Power - Carbine Length - Buffer Spring The Red spring is commonly used in 9mm, 6.8 SPC, 6.5 Grendel, .450 BM, .450 SOCOM, .500 Beowulf, and Colt LE6920’s specimen carbines, but certain specimen gunscan deviate from the norm depending upon port values and the power factor of your chosen ammunition loads. Color Coded RED. Works excellent with the KYNSHOT RB5015HD AR 9mm Heavy Damped Hydraulic Recoil Buffer NOTES: The RED spring is appropriate for moderately gassed .308 / 6.5 CM / .260 Rem heavier caliber carbine platforms using AR-10 / SR-25 Pattern (Armalite, LMT, LaRue, KAC, etc. receiver extensions and 3.25” carbine buffers. NOT for use in “DPMS Pattern”.308 Carbines using standard 7" deep M4 extension tubes and short, 2.5” buffers. (Use our "ORANGE” Spring" for that specific platform approach application.) Features: Extra Power - Carbine Length - Buffer Spring Compatible to 9mm Standard Blowback Systems Compatible to CMMG's 9mm Radial Delayed Blowback System Compatible to AR-15 5.56 NATO /.223 REM for 14.5″/16″ uppers with carbine length gas systems which are overgassed or suppressed Compatible to AR-15 6.8 SPC, 6.5 Grendel, .450 BM, .450 SOCOM, .500 Beowulf, and Colt LE6920’s carbines, depending ammunition load! Compatible to AR-10 .308 / 6.5 CM / .260 Rem which are moderately gassed! NOT for use in AR-10 “DPMS Pattern”.308 Carbines using standard 7" deep M4 extension tubes and short, 2.5” buffers! For carbine length buffer tubes only Made from chrome silicon wire stock Heat treated and shot peened Compatible accessories see under this article, accessories. Check your rifle with the Ejection Angle Chart  _____________________________________________________________________________________________________________________________________________________________________________________________ General Informations Why do we assign "COLORS" to our buffer springs? We have tens of thousands of buffer springs in various stages of enhancement or in inventory in our facility. This practice is beneficial to both you as the end user and for our employees to identify for quality control and fulfillment. We use Dykem® Opaque Metal Staining Dye to color code the springs, (not rattle can spray paint) during the QC and packaging process. This practice has become the standard industry reference for our different springs. Should you encounter fishy looking deals on internet auction sites, please send us an image for product validation, as there have been a very small intrusion of color coded imposters floating around from time to time that to the trained eye, are glaringly apparent from their advertising images and/or descriptions. Sprinco buffer springs are made from high quality Chrome Silicon wire stock which is used in a variety of applications from Formula One to motor valve springs which can see up to 15,000,000 compression cycles in a single race.  CONSTRUCTION SPECS: CARBINE & RIFLE BUFFER SPRINGS ASTM Grade A877 Certified Valve Quality Chrome silicon Wirestock Heat Treated, Stress Relieved and Dual Stage Shot-Peened post winding (Our springs really ARE shot-peened) Impregnation / Plating with Re-Micronized Molybdenum Disulfide formulation Hard plastic tube packaging for protected transport and easy storage (Tubes make great storage compartments for all sorts of gear) Optional Cryogenic Processing Available (Select Item 26001) ADVANTAGES: Increased "lock time" for faster sight recovery and platform stability Consistent spring pressure throughout the duty cycle of the spring, resulting in fewer malfunctions related to spring operation (Especially Type III malfunctions) Improved & consistent cyclic operation. Spring will not change performance for many hundreds of thousands of rounds Greater resistance to heat induced performance degradation Reduced cyclic rate with Enhanced or Extra Power springs and reduce / eliminate bolt bounce with optimal spring / buffer weight selection Reduced operating cost as replacement springs are not needed during the life of your upper receiver assembly. Less downtime and fewer trips to the armorer for spring replacement, in fact, this will most likely be the only buffer spring you will ever need for the duty cycle of your carbine or rifle! Correct spring selection works reliably, consistently, and virtually indefinitely in all properly built and maintained AR platformsMADE IN THE USA

 The Magpul CTR (Compact/Type Restricted) - Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3" thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Sling Mounts: Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs MADE IN USA  

  The best tool you can buy on the market for barrel nuts, buffer tube castle nuts, flash hider etc. installs or removal, undisputed! Professional gunsmith tool for all AR15 / M4 / M16 / AR10 Upper & Lower Receivers. SPECS Designed to work with 5.56 and 7.62 AR platform rifles components Works with encapsulated and pin style barrel nuts including the GI style nut Drive end for all MI free float barrel nuts - Including CRM,SLH,CRT,CRLW,ULW,G3M,G4M,SP Series ¾ inch wrench for A2 muzzle devices and designed to work with the thin flats on many of the popular suppressor mounts Castle nut driver with 3 notch engagement Combat bottle opener Small hammer head Torque specs features on wrench handle. Constructed from 4140 heat treated steel 1/2 Inch drive for torque wrench (2 pcs Interfaces) MADE IN THE USA

  This kit comes with everything you need to assemble a lower receiver, and install the barrel on a stripped upper for both M4 and M16 pattern rifles. AR LOWER RECEIVER VICE BLOCK •  Allows safe mounting of the lower receiver into a vise•  Perfect for cleaning, service, or weapon assembly•  Fits into magazine housing from either the top or bottom•  Magazine catch securely locks the receiver to the block•  Will not distort or damage the receiver•  Solvent resistant polymer construction AR UPPER RECEIVER VICE BLOCK •  Allows safe clamping of the upper receiver into a vise•  Perfect for repair, service, or weapon assembly•  Will not crush, distort, or mar the receiver•  Solvent resistant polymer construction BLACK AR15 / M4 / M16 ARMORER'S WRENCH •  Black anodized aircraft grade aluminum•  Ball bearing pivot detent•  Automatically locks into position when raised•  Flip-up posi-lock design to guarantee zero•  Quick detachable with adjustable A2 square post•  Fits standard gas blocks A1 & A2 FRONT SIGHT TOOL - 4 & 5 PRONG •  Compatible with AR-15 / M16•  All steel construction with black oxide finish

  M5 .308 Carbine Buffer for use in .308 Carbines with a collapsible buttstock. This shorter .308 buffer is specific to .308 Carbines and will not work in .308 Rifles or AR15 platform firearms. Perfect for your next build or direct replacement for worn out parts. Compatible with AR-10 Carbine Lenght Buffer Tubes, compatible accessories see under this article, accessories. Made In America? Yes FFL SOT Shipping Required No Platform AR-10 / M5 Weight(s) 3.8 oz Other Features Buffer Length: 2.5” MADE IN THE USA

   The Breakthrough Clean Armorer’s Wrench is the ultimate tool for your AR15/M4. Constructed out of durable titanium-plated stainless steel and includes a standard size muzzle device wrench. Easily installs and removes receiver extensions and castle nuts, functioning with both Mil-Spec and Pin-Style Barrel Nuts. Compatible with ½” Socket / Torque wrench and comes with a bonus Butt Stock Screwdriver.

  Strike Industries drop-in replacement buttstock for AR/15/M16 carbine using mil-spec sized receiver extension tubes. The MOD1 stock integrates features sought by military professionals and firearms enthusiasts around the world. Strike Industries came up with a lighter, compact buttstock, at an even more attractive price point.  Package includes1x MOD1 Stock  Product Spec- Length: 7.47”- Width: 1.74” @ QD cups- Height: 4.45”- Weight: 6.6 oz *For Mil-spec sized buffer tubes only Features- Slide on replacement for factory collapsible butt stock.- QD sling mounting points integrated on both sides in positions for optimum usage. - Enhanced cheek weld- Easy to replace and quick to install- Designed for use with and without rubber buttpad- Length of pull (LOP): 11.25″ to 14.25″ Mod- Buttpad Sold Separately: The Strike Industries Rubber Butt Pad is a drop in add on for the Mod1 Stock system.  The lightweight, slim profile enhances control and usability of the stock without dramatically increasing weight or bulk.  At only 0.36” in thickness, the butt pad doesn’t sacrifice the minimalist nature that the stock is known for while at the same time its flexibility offers some level of recoil attenuation.  The hybrid construction of impact resistant TPE integrated on a rigid polymer frame combines strength and resilience to provide the best of both worlds in creating the best possible shoulder weld. Features- Drop-in installation- Slim Profile- Enhanced Control- LightweightMADE IN THE USA

  The M4 is precision machined from solid bar stock using wire-EDM/CNC and fits discreetly with no visible footprint inside our specially inletted buttpad. Easily accessible without tools simply by pressing the release tabs on the buttpad (sold separately). Dot coded to indicate functions. The M4 is a patent pending 1-piece multi-tool for the M4 carbine designed and manufactured by MultiTasker® in conjunction with B5 Systems. FEATURES Tools: slotted screwdriver, castle nut spanner, 1/2″ hex for scope mounts, and bolt override Precision machined from barstock Nests inside the b5 systems buttpad Compatible accessories see under this article, accessories SPECS Weight: 1.12 oz Length: 3.82 in Width: .62 in Height: .1 in MADE IN THE USA

    Use the ERGO Adaptor to install an AR stock/brace & pistol grips on your Mossberg 500/590 & Shockwave shotguns. Accommodates mil spec or commercial buffer tubes.  Compatible with 500, 590 & Shockwave models For best installation, we suggest using the 3/16 Wrench Use any style AR stock/brace and pistol grip combination Accommodates mil spec or commercial buffer tubes This adapter has the proper drop designed in, so factory sights can be used. (Bead, Rifle, and Ghost Ring Sights) Made from glass filled polymer Includes mounting hardware Torque specifications for grip screw is 25-30 inch-pounds. DO NOT EXCEED. Product damage can occur because of over tightening. NSN 1005-01-652-2229 MADE IN THE USA

   JP Custom Centerless Ground and Polished Operating Spring For Large-Frame Buffer Tubes - Carbine Length in Caliber .308 | 7.62 | 6.5 CM For Small-Frame Buffer Tubes - Carbine Length in Caliber 9mm Stainless Steel Polished Compatible accessories, see under this article, accessories Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. This is the buffer spring we recommend for use with 9mm carbines.  MADE IN THE USA

  The RB5000 KynSHOT Recoil Buffer is designed to fit AR-15 carbines with a collapsible stock. Compatible Caliber: .223/5.56mm .450 Bushmaster, 7.62x39, 6.8 SPC, 6.5 Grendel, 7.62x40 Wilson, .204, .350 Legend, etc. Compatible to Carbine Length Buffer Tubes NOT Compatible Caliber: 9mm Made using 17-4 stainless steel, the KynSHOT RB5000 Recoil Buffer is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and prevent bolt bounce as a new cartridge is chambered. The KynSHOT RB5000 Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. (ECCN Controlled). Compatible accessories see under this article, accessories. BENEFITS  Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS  Weight 4.2 Ounces Length when compressed 3.25” Designed for .223/5.56mm AR15 Carbines DO NOT USE IN 9mm AR-15s. For 9mm AR15s use KynSHOT P/N RB5007, RB5015HD, or RB5020SS. See Selection Matrix for proper buffer choice. Mil-Spec Hydraulic Fluids and Seals- Ambient operating temp certified for -30F - +150F High strength 17-4 Stainless Steel construction throughout the unit making it virtually impervious to corrosion. Can be used with a wide range of AR-15 calibers to include .450 Bushmaster, 7.62x39, 6.8 SPC, 6.5 Grendel, 7.62x40 Wilson, .204, .350 Legend, etc. Compatible accessories see under this article, accessories. MADE IN THE USA

  High-quality AR-15/M16 Standard Buffer, Carbine length. Compatible with all AR-15 MIL-SPEC and COM-SPEC Carbine length buffer tubes. Weight: 2.93 oz / 83,06g

  The KynSHOT RB5005 Recoil Buffer is designed for AR-10 carbines with a collapsible stock that use the standard AR-10 length tubes that are 7.75" deep on the inside.  Compatible to Carbine Length Buffer Tubes NOT compatible to Heckler & Koch Firearms The RB5005 reduces felt recoil 20-30%, while largely eliminating muzzle flip.  The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered. Compatible accessories see under this article, accessories. BENEFITS  Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS  Weight: 5.0 Ounces. Length when Compressed: 3.25”. Replaces buffers that are 3.25″ in length. Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F - +150F. NOT compatible to Heckler & Koch Firearms DO NOT USE IN 9mm AR-15s. For 9mm AR15s use KynSHOT P/N RB5007, RB5015HD, or RB5020SS.  High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion. Designed for 7.62mm/.308 cal. AR-10 type rifles with an AR-10 length collapsible stock buffer tube which is 7 3/4" long on the inside (AR-15 collapsible buffer tubes are 7" on the inside). The best way to confirm is to measure the length of the buffer that came with the rifle from the factory.  MADE IN THE USA

  Hochwertiger AR-15 M4 MIL-SPEC Multi Caliber * ELITE * Lower von ANDERSON Details/Angebotsumfang: Fabrikneuer ANDERSON ARMS AM-15 M4 MIL-SPEC Lower * ELITE Ausführung, Upper und Lower mittels Tension Set Screw einstellbar Inklusive Nylon Tipped Tension Set Screw Stripped, ohne Anbauteile wie abgebildet Aus einem geschmiedeten Block 7075-T6 Aluminium gefräst Open Trigger Guard, Verwendung von Handschuhen möglich Oberfläche: MIL-SPEC Type 3 Black Hard Anodized MULTI CALIBER  Kompatibel mit allen AR-15 MIL-SPEC Upper wie z.B. von AERO Precision, T73, PERUN ARMS, SCHMEISSER, SIG SAUER 516 usw. im Kaliber .223 REM/5,56, .300 AAC, 6,5 Grendel, 7,62x39, .450 Bushmaster Kompatibel mit allen AR-15 Magazinen wie z.B. von MAGPUL, DURAMAG, ASC, D&H, IMI, usw. Kompatibel zu allen MIL-SPEC Abzügen wie z.B. TRIGGERTECH, TIMNEY, GEISSELE usw. Kompatibles Zubehör siehe unter diesem Artikel, Zubehör MADE IN THE USA

  The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK.  Compatible to Carbine Length Buffer Tubes NOT Compatible Caliber: 9mm The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement. BENEFITS  Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS  Weight 4.0 Ounces Length when compressed 3.25” Designed for 5.56mm/.223 cal. AR-15 with a collapsible stock Do NOT use in 9mm AR-15s. For 9mm AR-15s use KynSHOT P/N RB5007, RB5015HD or RB5020SS.  Mil-Spec Hydraulic Fluids and Seals- Ambient operating temp certified for -30F - +150F High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion. Designed for .300 BLACKOUT or any softer cycling AR-15. MADE IN THE USA

  The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Kompatible MIL-SPEC Buffer Tubes sowie Zubehör siehe unter diesen Artikel, Zubehör.  With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting. HEIGHT & CANT ADJUSTABLE NON-SLIP RUBBER BUTT-PAD Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height. Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG     TOOL-LESS COMB HEIGHT AND LENGTH OF PULL ADJUSTMENT   Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents. Steel adjustment shafts finished with Melonite® for wear and corrosion resistance   SLING MOUNT OPTIONS Front/Rear - rotation-limited QD sling swivel mounts (swivels not included) Rear - 1.25" aluminum sling loop (left-right reversible)     BOTTOM M-LOK SLOTS FOR MONOPOD/ACCESSORY MOUNTING Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod MADE IN THE USA Subject to printing errors and changes. Our product pictures and item descriptions are protected by copyright. Any further use without our consent constitutes a copyright infringement in accordance with § 86 of the Copyright Act.

  The best wrench you can buy on the market for Buffer Tube Castle Nut installs or removal. Professional gunsmith tool for AR15 / M4 / M16 / AR10 models, made from tool steel. MADE IN THE USA

Premium Wrench for Buffer Tube Castle Nut installs or removal. Specifications: For AR15 / M4 / M16 / AR10 modelsMade from tool steelRubberized HandleMADE IN THE USA

Protect your AR Upper Receiver with the Vise Block Clamp from ROCK RIVER ARMS®. This polymer block allows you to safely secure an AR upper receiver in a vise with twisting or crushing the receiver or damaging its finish. Optimized for AR15 / M4 / M16 forged Upper Receivers. Especially helpful for torquing a barrel on or removing a stufforn barrel nut, this specialized clamp also proves helpful for simple gun maintenance and cleaning. Specifications: Premium Gunsmith Tool Made of a high pressure solvent resistant polymerCompatibility: AR15 / M4 / M16 / forged Mil-Spec Upper ReceiversMADE IN THE USA

Premium Conversion Block for AR-15 Lowers Specifications:Platform: AR15 9mmMachined from 7075-T6 forged aluminumEjector and Ramp machined from steelFinish: Black Hard Coat Anodized, Type III Compatibility: AR-15 9mm Lower Receiver according to Mil-Spec diametersWorks only with BCG with COLT CutWorks only with COLT SMG magazines &ClonesMADE IN THE USACompatible magazines, bolts and accessories see under this article, accessories

  Durable universal tool for both M16 fixed stock and M4 collapsing stock variants of the AR-15 platform. Allows the installation/removal of barrel nuts, muzzle devices, and buttstocks.   •  Heavy duty multi tool •  CAR stock w/ 3 point castle nut / locking ring br /> •  Install / disassemble nuts, compensators & buffer tubes •  Removal / installation of AR-15 barrels •  Receiver tube stock nut wrench •  A1 / A2 flash hider slot / receiver extensions •  Made of 4140 powder coated steel