ANDERSON KIGER-9C® PRO SLIDE Target Crown Fluted & Serrated DLC

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Chameleon PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Introducing the Strike Magazine for GLOCK® G19 (9mm) a 15-round capacity translucent, smoke magazine body that provides easy visibility of your ammo, with a tool-less baseplate that allows for quick and effortless disassembly. During the development of this magazine we tried and tested all of the most popular defense rounds to ensure consistent operation. The Strike G19 Mag features an orange follower and our increased strength magazine spring for extra reliability and consistent performance. The baseplate button includes drainage vents for debris and fluid to exit from. The ambidextrous magazine release cuts allow for use with all generations of GLOCK® pistols for either handed users. Its ergonomic edges make for a positive grip and easy handling when on the move. ID markers are also available on the bottom of the baseplate to make it easy to label your magazines. For increasing capacity, consider pairing with the SI Extended Magazine Plate (EMP) in either the polymer or aluminum versions as well as other brand magazine extensions that are made to fit a G19 magazine. Made from high-strength, impact-resistant custom blended SI Polymer Extreme, the Strike Magazine for GLOCK® G19 9mm is built to last. COMPATIBILITY: GLOCK® G19,G26 GEN3-5  ANDERSON Kiger-9C® G19 models NOT COMPATIBLE: GLOCK® G19X MAY NOT WORK WITH SOME MAGWELLS MADE IN THE USA DISCLAIMER:-This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.--“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  High quality slide parts kit for Glock 19 Gen1-3 models with Channel Liner Tool COMPATIBILITY: Glock® 19 Gen 1 Glock® 19 Gen 2 Glock® 19 Gen 3 Kiger-9C® Kiger-9C® PRO KIT INCLUDES: Extractor with Loaded Chamber Indicator - Material - 174 Stainless Steel  MIM Extractor Depressor Plunger - Material - 4140 Steel Extractor Depressor Plunger Spring Spring Loaded Bearing Firing Pin (Striker) - Material - 174 Stainless Steel MIM Firing Pin Spring Firing Pin Safety (Material - 4140 Steel (Electroless Ni Coating)) with Spring Firing Pin Channel Liner Channel Liner Tool Firing Pin Spring Cups Firing Pin Spacer Sleeve Slide Cover Plate Guide Rod and Recoil Spring Assembly  100% AMERICAN MADE. 100% ANDERSON. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK® , Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com or www.glock.eu

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Fluted Barrel with Target recessed Crown Serrated Breech Block Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: Rainbow PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: TiN Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

 The latest addition to the ZeroTech range is the ready on demand Thrive HD Reflex sight with advanced shake awake technology to ensure it’s ready to go when you are! Built on the popular RMR/SRO footprint, the Thrive HD Reflex will mount to most firearms. The Thrive HD reflex sight comes standard with a Dual bolt Picatinny rail interface base.Features:Up to 50.000 hours battery lifeRMR/SRO footprintDirect mount to pistols for enhanced compatibilityMoulded rubber cover includedDual bolt Picatinny rail interface base includedAuto shutoff and Auto ONAdjustable brightnessRobust Build: Guaranteed Waterproof and Shock proofAR lens coating specially developed for the least possible image distortionWaterproof pull-out battery compartment, O-ring sealedLifetime warrantyDetails:Ready to take your aim to the next level? Think faster acquisition. Increased accuracy. High-performance. Let nothing hold you back as you zero in on your target. With ZeroTech red dot sights you can experience the latest in precision riflescope red dot technology.The advanced shake-awake technology ensures that the sight is always ready when you are, with auto shutoff to conserve battery life and auto ON for instant activation. With up to 50.000 hours of battery life and a rugged construction that is both waterproof and shockproof, the THRIVE HD Reflex Sight is built to withstand the toughest conditions and recoil of even the most powerful cartridges.The sight’s universal footprint allows for a wide variety of mounting options, including direct mounting to pistols for enhanced compatibility. It is equally at home on a lever action rifle as it is on AR-style rifles. Low profile windage and elevation access points keep your settings secure yet make adjustments quick and easy in the field.We’ve combined years of experience and knowledge, and unravelled extensive research, for shooters to achieve their very best in on-target performance ZeroTech red dots feature multi-level brightness settings and rugged construction that will withstand the toughest conditions. Yet simple, lightweight and compact. An anti-reflective (AR) lens coating delivers an unwavering clear vision. Our fine 3 MOA dot gives you a precise aiming point, keeping you locked on target. Perfect for close to mid-range target distances.Key Features:Magnification: 1x with a 28mm objective lens.Reticle: Fine and precise 3 MOA red illuminated dot using DIAL technology.Advanced Shake Awake Technology: Auto shutoff and auto ON for instant readiness.Brightness Settings: 11 adjustable levels catering to various environments.Rounded edges at the rear end protect the user from the risk of injury in haptic situations.Waterproof and Shockproof: Built to withstand harsh conditions and heavy recoil.Battery Life: An impressive maximum of 50.000 hours, powered by a CR2032 battery.Lens Coating: Multi-layered for pristine and sharp visuals.1 MOA fine adjustment per click.Operational Temperature: Reliable performance ranging from -4°F to + 158°F (-20°c to +70°c).Dimensions: A sleek design measuring L: 1.77” (45.00mm), H: 1.10” (28.00mm).Weight 1.50oz (42,5 grams) inclusive battery, without picatinny interface.Weight 2.51oz (71,10 grams) inclusive battery with picatinny interface.InformationsIncluded Moulded rubber coverIncluded 3x2 pcs different Optic screws and wrenchesCR2032 Battery includedManual see under this article, download areaCompatible firearms and accessories see under this article, accessoriesSPECIFICATIONSMagnification1xObjective Lens Diameter28mm x 20mmReticle3 MOA Red DotBrightness Settings11 AdjustableDurabilityShockproof, Waterproof and Fog ProofAuto Sleep/ Auto ONYes – Motion SensorIllumination FunctionButtons +/-BatteryCR2032 – Side Loading. No need to remove entire sight to replace battery.Battery LifeMax 50,000 HoursTurret Index Value1 MOA / ClickWindage / Elevation Adjustment Range90 MOAEye ReliefUnlimitedField of View (FOV)UnlimitedLens CoatingMulti CoatedOperational Temperature-20°c to +70°cDimensionsL: 45mm, H: 28mm (Not including mount)Weight42,50 / 71,10 grams ZEROTECH TRIPLE A LIFETIME WARRANTY​

  Unlock superior visibility with the new THRIVE HD Green Dot Micro Reflex Sight, tailored for shooters seeking enhanced target acquisition and reduced eye strain. This reflex sight utilizes a green dot reticle, which is more visible under bright conditions due to its alignment with the peak wavelength perceived by the human eye. Ideal for competitive shooting and bright hunting environments, its advanced shake awake technology ensures the optic is always ready without manual activation. Built on the Shield RMSc footprint, this sight offers widespread compatibility, making it a versatile choice for any shooter. Features: Vivid Green Dot Reticle: Sharp 3 MOA green dot, highly visible in bright conditions and suitable for users with astigmatism. Long Battery Life: Up to 50,000 hours from a single CR2032 battery, ensuring reliability over extensive use. User-Friendly Functionality: Automatic brightness adjustment, with 10 settings including three for night vision, provides optimal visibility in various environments. Shield RMSc footprint Weighs only 19 grams (0.67oz) Moulded rubber cover included Auto shutoff and Auto ON Robust Build: Guaranteed Waterproof and Shock proof AR lens coating specially developed for the least possible image distortion Integrated Battery box O-ring, no additional seal required! Lifetime warranty Details: The THRIVE HD Green Dot Micro Reflex Sight (THDM21G) stands out with its green 3 MOA dot, which is easier on the eyes than traditional red dots and offers quicker sight recovery post-recoil. The sight’s design minimizes light scatter, providing a clearer and more consistent aiming point, especially beneficial for shooters with astigmatism. Its rugged and lightweight 6061 T6 aluminium construction can withstand harsh conditions without loss of functionality. The inclusion of a molded rubber cover and a recoil-proof, fog-proof build ensures that the sight remains dependable in diverse shooting scenarios. With its design based on the RMSc footprint, the Thrive HD Micro Reflex integrates effortlessly with all RMSc compatible firearms and mount interfaces. This ensures users benefit from a broad spectrum of compatibility options, further accentuating the optic’s adaptability. Green vs. Red Dot Sights: Advantages of Green Dot Enhanced Visibility: Green dots are near the peak of human eyes’ photopic sensitivity, making them more visible in bright light. Reduced Eye Strain: Green light is less strenuous on the eyes, allowing for more comfortable use over long periods. Astigmatism Friendly: Green dots provide a sharper image for those with astigmatism, reducing blur and distortion. Considerations: While green dots offer many benefits, they may blend into lush backgrounds. Red dots, by contrast, provide better visibility against diverse backdrops and in low-light conditions. Key Features: Magnification: 1x with a 21mm objective lens. Reticle: Sharp 3 MOA Green Dot. Brightness Settings: 10 adjustable levels catering to various environments. Durability: Built to be recoil-proof, waterproof, and fog-proof. Battery Life: An impressive maximum of 50,000 hours, powered by a CR2032 battery. Lens Coating: Multi-layered for pristine and sharp visuals. Operational Temperature: Reliable performance ranging from -4°F to + 158°F (-20°c to +70°c). Dimensions & Weight: A sleek design measuring L: 1.6” (40.55mm), H: 0.86” (21.95mm), and weighing approximately 0.67oz (19 grams). The Thrive HD Compact Reflex Optic is more than just a piece of equipment; it’s a pledge from ZeroTech Optics. It promises reliability, unmatched durability, and superior performance tailored for your everyday carry pistol. ZeroTech Optics remains at the forefront of optical advancements, and the Thrive HD Reflex optics exemplify their dedication to meeting and exceeding user expectations. INFORMATIONS Included Moulded rubber cover Included M3x0,5x10 / M4x0,7x8 / 6-32x13 Optic screw kit and wrenches CR2032 Battery not included Manual see under this article, download area Compatible firearms and accessories see under this article, accessories SPECIFICATIONS Magnification 1x Objective Lens Diameter 21mm x 15mm Reticle 3 MOA Green Dot Brightness Settings 10 Adjustable Durability Shockproof, Waterproof and Fog Proof Auto Sleep/ Auto ON Yes – Motion Sensor Illumination Function Buttons +/- Battery CR2032 Battery Life Approximately 50,000 Hours Windage / Elevation Adjustment Range 60 MOA Eye Relief Unlimited Field of View (FOV) Unlimited Lens Coating Multi Coated Operational Temperature -20°c to +70°c Dimensions L – 40mm / 1.5748″ W – 23mm / 0.9055″ H – 22mm / 0.8661″ Weight Approx. 19 Grams 

  The Evolution. Introducing the new THRIVE HD Multi Reticle Red Micro Reflex Sight, an exceptionally lightweight and slim line optic designed for superior target acquisition. Equipped with advanced shake awake technology, this sight is always ready for action, ensuring you never miss a moment. The multi-reticle system offers flexibility, allowing users to adjust the sight to the specific needs of each scenario, enhancing acquisition speed and re-engagement post-recoil. Features: Multi Reticle Functionality: Versatile system allows for reticle preference selection Extended Battery Life: Up to 50,000 hours with a standard CR2032 battery User-Friendly Functionality: Automatic brightness adjustment, with 10 settings Shield RMSc footprint Weighs only 19 grams (0.67oz) Moulded rubber cover included Auto shutoff and Auto ON Robust Build: Guaranteed Waterproof and Shock proof AR lens coating specially developed for the least possible image distortion Integrated Battery box O-ring, no additional seal required! Lifetime warranty Details: The THRIVE HD Micro Reflex Sight combines cutting-edge technology with robust construction to deliver outstanding performance. Featuring a 21mm objective lens with a multi-layer coating, the optic provides a clear, sharp image under all conditions. The innovative multi reticle option enhances functionality, offering a large outer circle and a precise 3 MOA center dot, ideal for quick acquisition and easy follow-up shots. The sight’s auto sleep and auto-on functions driven by a motion sensor, adjustable brightness settings, and a recoil-proof design make it a top choice for both recreational and professional use. Advantages of the Multi Reticle System The multi reticle system is a standout feature that significantly enhances user experience by providing options to switch between reticle types depending on the shooting conditions. The large outer circle aids in faster target acquisition and helps maintain focus on the target through the recoil cycle, while the sharp 3 MOA dot allows for precise aiming at longer distances. This reflex sight is more than just an accessory; it is an integral part of your shooting gear, promising reliability, unmatched durability, and superior performance optimised for your everyday carry and competitive shooting needs.  Key Features: Magnification: 1x with a 21mm objective lens. Reticle: Sharp Red Multi Reticle Brightness Settings: 10 adjustable levels catering to various environments. Durability: Built to be recoil-proof, waterproof, and fog-proof. Battery Life: An impressive maximum of 50,000 hours, powered by a CR2032 battery. Lens Coating: Multi-layered for pristine and sharp visuals. Operational Temperature: Reliable performance ranging from -4°F to + 158°F (-20°c to +70°c). Dimensions & Weight: A sleek design measuring L: 1.6” (40.55mm), H: 0.86” (21.95mm), and weighing approximately 0.67oz (19 grams). The Thrive HD Compact Reflex Optic is more than just a piece of equipment; it’s a pledge from ZeroTech Optics. It promises reliability, unmatched durability, and superior performance tailored for your everyday carry pistol. ZeroTech Optics remains at the forefront of optical advancements, and the Thrive HD Reflex optics exemplify their dedication to meeting and exceeding user expectations. INFORMATIONS Included Moulded rubber cover Included M3x0,5x10 / M4x0,7x8 / 6-32x13 Optic screw kit and wrenches CR2032 Battery not included Manual see under this article, download area Compatible firearms and accessories see under this article, accessories SPECIFICATIONS Magnification 1x Objective Lens Diameter 21mm x 15mm Reticle Multi Reticle – 3MOA Dot, 42MOA circle with 3MOA centre Dot, 42MOA circle Brightness Settings 10 Adjustable Durability Shockproof, Waterproof and Fog Proof Auto Sleep/ Auto ON Yes – Motion Sensor Illumination Function Buttons +/- Battery CR2032 Battery Life Approximately 50,000 Hours Windage / Elevation Adjustment Range 60 MOA Eye Relief Unlimited Field of View (FOV) Unlimited Lens Coating Multi Coated Operational Temperature -20°c to +70°c Dimensions L – 40mm / 1.5748″ W – 23mm / 0.9055″ H – 22mm / 0.8661″ Weight Approx. 19 Grams 

  Experience superior performance with the TRACE Rapid Aiming System (R.A.S) 1×25 Digital Red Dot, crafted for shooters who require precision and versatility in a stylish, streamlined design. Built on the popular Aimpoint® Micro®, the R.A.S Digital Red Dot and is compatible with a wide range of firearms. This advanced red dot sight features a bright 2 MOA dot for accuracy and includes both high and low mounting options to accommodate various shooting styles. As a member of the TRACE family, this sight epitomizes ZeroTech’s optical excellence, providing a broad, unobstructed field of view and outstanding durability. Its elegant finish not only enhances functionality but also adds a refined aesthetic to your firearm. Features: Up to 50.000 hours battery life  Aimpoint® Micro® footprint Moulded rubber cover included Picatinny rail interface base included High Picatinny Riser included Auto shutoff and Auto ON Adjustable brightness Robust Build: Engineered with a 7075 Aluminum body, ensuring shockproof, waterproof, and fog-proof durability Optimal Visibility: Equipped with a 2 MOA Red Dot and 10 brightness settings Large Field of View: The 25mm objective lens provides a wide, unobstructed field of view, enhancing situational awareness and target acquisition Fully multi-coated optics for clear visuals Waterproof side-loading battery compartment, O-ring sealed Lifetime warranty Details: The TRACE R.A.S. 1X25 Digital Red Dot sets a new standard for red dot sights in the TRACE product family. With a generous 25mm objective lens, this optic offers a large, clear field of view, free from obstructions thanks to its recessed LED diode. This design ensures that shooters have an unobstructed view of their target, enhancing both awareness and confidence in any shooting scenario. The sight’s 2 MOA red dot is exceptionally bright and sharp, making it ideal for both rapid target acquisition and precise shooting. Included high and low picatinny mounts provide versatility for different shooting setups, ensuring that the sight can be comfortably and effectively used on many different types of firearms. The digital controls with shake awake technology mean that the sight is always ready when you are, conserving battery life while maintaining immediate responsiveness. With a battery life of up to 50,000 hours, this red dot sight is reliable for long-term use without frequent battery changes. Key Features: Wide Field of View: Perfect for maintaining situational awareness and rapid target engagement. Versatile Mounting: High and low mounts included to fit a wide variety of firearms and shooting preferences. Magnification: 1x with a 25mm objective lens. Precise Aiming: The 2 MOA dot is ideal for both quick shots and maximum precision. Advanced Shake Awake Technology: Auto shutoff and auto ON for instant readiness. Brightness Settings: 10 adjustable levels catering to various environments. Rounded edges at the rear end protect the user from the risk of injury in haptic situations. Waterproof and Shockproof: Built to withstand harsh conditions and heavy recoil. Battery Life: An impressive maximum of 50.000 hours, powered by a CR2032 battery. Lens Coating: Multi-layered for pristine and sharp visuals. 0.5 MOA fine adjustment per click. Operational Temperature: Reliable performance ranging from -4°F to + 158°F (-20°c to +70°c). Weight 168 grams inclusive battery with low picatinny interface. Weight 179 grams inclusive battery with high picatinny interface. Informations Included Low Picatinny rail interface base Included High Picatinny Riser Included Protective Lens Cover Included 8 pcs base screws Manual see under this article, download area Compatible firearms and accessories see under this article, accessories SPECIFICATIONS Magnification 1x Objective Lens Diameter 25mm Reticle 2 MOA Red Dot Brightness Settings 10 Adjustable Durability Shockproof, Waterproof and Fog Proof Auto Sleep/ Auto ON Yes – Motion Sensor Illumination Function Buttons +/- Battery CR2032 – Side Loading. No need to remove entire sight to replace battery. Battery Life Max 50.000 Hours Turret Index Value 0.5 MOA / Click Mounting Options Included high and low mounts for Picatinny rails Eye Relief Unlimited Field of View (FOV) Unlimited Lens Coating Multi Coated Operational Temperature -20°c to +70°c Dimensions L: 70mm, H: 55mm (including low mount) Weight 168 / 179 grams  

  Suppressor Fiber Sight Kit for Glock® models COMPATIBILITY: GLOCK®  17, 17L, 18, 19, 19X, 21, 22, 23, 24, 25, 31, 32, 33, 34, 35, 36, 37, 38, 39, 41, 44, 45 Generation 1-5 and GLOCK® MOS models ANDERSON Kiger-9C®, all models SHADOW SYSTEMS, all models MOS CO-WITNESS HEIGHT SPECS (ABSOLUTE CO-WITNESS) KIT INCLUDES: Front Sight with green Fiber Inlay, Suppressor Height Rear Sight, Serrated with fixing screw, Suppressor Height Yellow Fiber Inlay Red Fiber Inlay Front Sight Screw Material: 174 Stainless Steel, DLC Coating  100% AMERICAN MADE. 100% ANDERSON. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK® , Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com or www.glock.eu

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Rainbow PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: TiN Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.