ANDERSON M16/AR-15 Bolt Carrier 5.56/.223 MIL-SPEC

  Hochwertige Reinigungs- und Reparaturmatte für Ihre AR-15. Das Softtop schützt Ihre Waffe vor Kratzer während die Neoprenkautschuk-Rückseite Ihre Arbeitsfläche vor Beschädigung und Verschmutzung schützt. Hochwertiger Neoprengummi und einer Stoffoberseite mit Optic-Ready Explosionszeichnung. Diese hochwertige Matte kann auf jeder Werkbank, Schreibtisch, Küchentisch etc. genutzt werden. Das weiche Polyester-Top sorgt dafür, daß Ihre Waffe nicht zerkratzt wird, während der Neopren-Gummirücken auf der Matte alles an Ort und Stelle hält und verhindert, daß Ihre Arbeitsfläche rutscht und hält Reinigungsprodukte, Öl und Schmutz davon ab den Untergrund zu verschmutzen. Die ANDERSON Arbeits- und Reinigungsmatte kann mit einem Schonprogramm gewaschen und muß anschließend an der Luft getrocknet werden. Nicht geeignete Trocknungsmetoden sind z.B. Wäschetrockner. Mit der erstklassigen Explosionszeichnung und der zugehörigen Ersatzteilliste können Reparaturen, eine komplette Zerlegung der Waffe oder die Grundreinigung viel schneller und einfacher durchgeführt werden.  ABMESSUNGEN: 91 X 31cm, Gewicht: 460g, Hersteller TEKMAT    100% AMERICAN MADE. 100% ANDERSON. ANDERSON MANUFACTURING 

  This Enhanced Firing Pin Retaining Pin is made to MIL-W-13855 specifications to ensure reliable function for a long service life. The Pin is made of ASTM A313 17-7 PH Stainless Steel Moly Plated + Cryogenic Processed for 3X - 7X Normal Duty Cycle that has been heat treated and stress relieved, passivated, and precision tolerances. It is always important to have some backups and Sprinco USA has you covered.  FEATURES / INFORMATION: Replacement AR-15 M4/M16 Firing Pin Retaining Pin Made to MIL-W-13855 standards Compatible to Mil-Spec Small Frame Bolt Carriers including 5.56, 300 AAC, 6.8 SPC, 6mm ARC, 6.5 Grendel etc. NOT compatible for .308, 6.5 CM or Other Large Frame Bolt Carriers Extreme duty cycles provided while maintaining performance specifications Made of ASTM A313 17-7 PH Stainless Steel  Moly Plated + Cryogenic Processed for 3X - 7X Normal Duty Cycle Compatible accessories see under this article, accessories. _____________________________________________________________________________________________________________________________________________________________________________________________ General Informations The Sprinco Replacement Enhanced Firing Pin Retaining Pin is made from high quality material to produce long lasting durability. Standard for US military, recommended by professional gunsmiths.MADE IN THE USA

  Seeing "MIL-SPEC" as just the starting point, we set out to ensure the best options are available for our demanding customers. Improvements include using 9310 tool steel for the bolt, nitriding the assembly to increase surface hardness, decrease resistance, and have superior corrosion resistance compared to typical phosphated bolts. All bolts are fully MPI tested to ensure the material is sound and without defects. Bolt lugs are chamfered 45 degrees to ensure reliable action for even the highest pressure hand loads and fast lightweight actions. Extractors are S7 Tool Steel. From there, the extractor is sprung using the spring, o-ring, and silicone insert. Detailed Specifications: Bolt: 9310 Tool Steel Construction Full MIL-SPEC Heat Treatment Shot Peened to MIL-SPEC Magnetic Particle Inspection (MPI) Back of Lugs Chamfered for Reliability Spring, Insert, & "Crane" O-Ring Installed Salt Bath Nitrided  Extractor: S7 Tool Steel Construction Fully Heat Treated Shot Peened Per MIL-SPEC Details/Angebotsumfang: FAXON Verschlusskopf komplett Inklusive Extractor Inklusive Extractor Pin Spring Inklusive Extractor Spring O-Ring Inklusive Extractor Buffer Inklusive Extractor Detent Pin Inklusive Ejector Pin Inklusive Ejector Pin Spring Inklusive Gas rings Informationen: Exklusive C.I.P. Beschuss Kompatibel zu allen AR-15 Bolt Carrier nach Mil-Spec Diameter Fertigung Kompatibel zu allen AR-15/M16 Barrel Extensions nach Mil-Spec Diameter Fertigung Nicht kompatibel zu SCHMEISSER, OBERLAND ARMS und HERA - AUSTRIA Versionen Verschlussabstand: Es wird grundsätzlich immer empfohlen, den gleichen Hersteller zu verwenden MADE IN  THE USA

  An excellent choice for your next AR-15 build - affordable and highly recommended. Comes complete with Gas Key, Cam Pin, Firing Pin and Firing Pin Retainer. Compatible with 5.56 NATO, .223 REM, and .300 Blackout. Details: Generation 2 Bolt Carrier Material: 8620 Steel Bolt Material: 9310 Tool Steel Bolt Carrier Finish: Salt Bath Nitrided Bolt Finish: Magnesium Phosphate MPI Tested M16 Full Auto Profile Forward Assist Serrations Informations: C.I.P. Proof not included Compatible with all AR-15 upper receivers with Mil-Spec diameter manufacturing Compatible with all AR-15/M16 Barrel Extensions according to Mil-Spec Diameter production in caliber 5.56 NATO/.223 REM/.300 BLK For compatible accessories, see accessories under this article Laser markings were carried out covertly   Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON.

  Polished Nickel Boron M16/AR-15 Complete Bolt Carrier. Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer. ANDERSON MANUFACTURING  SPECS: MIL-SPEC Diameter Production M16 Profile Included staked Nickel Boron Gas Key Forward Assist Serrations Finish: Polished Nickel Boron for best gliding properties Compatible with AR-15 MIL-SPEC Upper Receivers Compatible with AR-15 MIL-SPEC bolts in caliber .223 REM/5.56 NATO, .300 AAC Informations: Compatible accessories, see accessories under this article  100% AMERICAN MADE. 100% ANDERSON.