AR- Abzüge

Our AR lower parts kit includes everything you need to fully assemble a stripped AR lower receiver. It includes a trigger, hammer, trigger guard, magazine catch, bolt catch, selector switch, and all necessary pins and springs. Made with high-quality materials for durability and longevity. No MIM here. Luth-AR produces only the best quality, American made parts for the AR platform. All of the parts included in our lower parts kits are investment cast or otherwise machined to Mil-Spec drawings, materials and heat treat. Springs are a combination of 17-4 SST and various Mil-Spec steel wire are used in all of our springs with certification. 100% MADE IN THE USA Includes: LR-01 Buffer Retainer 1-ea.LR-02 Buffer Retainer Spring 1-ea.LR-03 Trigger Guard 1-ea.LR-04 Trigger Guard Pin 1-ea.LR-08 Selector/Safety 1-ea.LR-09 Bolt Catch Spring 1-ea.LR-10 Bolt Catch Buffer (Plunger) 1-ea.LR-11 Bolt Catch 1-ea.LR-12 Bolt Catch Roll Pin 1-ea.LR-13 Magazine catch 1-ea.LR-14 Detent Spring 2-ea.LR-15 Takedown Detent 2-ea.LR-16 Mag Catch/Buttstock Plunger Spring 1-ea.LR-17 Magazine Catch Button, Aluminum 1-ea.LR-18 Front Pivot Pin 1-ea.LR-19 Disconnector, AR15 1-ea.LR-20 Trigger AR15 1-ea.LR-22 Trigger Spring 1-ea.LR-23 Pistol Grip Bolt 1-ea.LR-24 Pistol Grip Lock Washer 1-ea.LR-25 A2 Pistol Grip, Black Plastic 1-ea.LR-26 Selector/Ejector Spring 1-ea.LR-27 Detent (Selector) 1-ea.LR-28 Hammer/Trigger pin 2-ea.LR-30 Pin, Rear Takedown 1-ea.LR-31 Disconnector Spring 1-ea.LR-32 Hammer Spring 1-ea.LR-33K Hammer AR15, w/J Spring 1-ea.

   This kit includes all the Mil-Spec quality components you have come to expect from BUSHMASTER® FIREARMS AR15 MIL-SPEC Trigger Kit includes: Hammer Hammer Spring Trigger Trigger Disconnect Spring Trigger Spring Disconnector Compatible accessories see under this article, accessories.

  JP Tactical Spring Kit This spring kit will yield a 4.0-4.5 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. Product Instructions MADE IN THE USA

  JP Enhanced Reliability Spring Kit This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability. Product InstructionsMADE IN THE USA

  JP Reduced Power Spring Kit  This spring kit will yield a 4.0-4.5 lb. pull with standard AR-15 trigger parts and 3.0-3.5 lb. with JP trigger parts.  Application: Use of this spring kit requires the use of US-manufactured (domestic) ammunition or reloads with domestic (non-NATO spec) primers as ignition reliability will be reduced with hard, low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions. These springs are for recreational or competition shooting only and should not be installed in any rifle used for defense or duty applications or any AR-10 type rifle. Product Instructions MADE IN THE USA

  HIGHLIGHTS Significant AR Upgrade Medium Weights, 4½ and 5½ lb. Pulls, NON Adjustable MIL Upgrade, LE/SWAT, Personal Utility HEAVY GUNNER + DUPLEX TRIGGER BOW™ High Position: Safety Under Duress Shortened Pull Higher Weight 6 lb. Spring Low Position Tactical Precision Lengthened Pull Lower Weight 4 lb. Spring US Patents: 9052149, 9175917, 9696103, D817436, 10006733 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT recommended for use in AR-9 / PCC 9mm variants NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS Significant AR Upgrade Medium Weights, 4½ and 5½ lb. Pulls, NON Adjustable MIL Upgrade, LE/SWAT, Personal Utility BONUS BENEFITS Radical Sear Mechanics™ Smooth Accurate Heavy Hammer Head™ More Powerful Primer Strikes Faster Than MIL Lock-Up US Patents: 9052149, 9175917, 9696103, D817436, 10006733 Standard Benefits Curved Trigger with a Backbone™ Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT recommended for use in AR-9 / PCC 9mm variants NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS Significant AR Upgrade Medium Weights, 4½ and 5½ lb. Pulls, NON Adjustable MIL Upgrade, LE/SWAT, Personal Utility BONUS BENEFITS Radical Sear Mechanics™ Smooth Accurate US Patents: 9052149, 9175917, 9696103, D817436, 10006733 Standard Benefits Curved Trigger with a Backbone™ Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT recommended for use in AR-9 / PCC 9mm variants NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS Significant AR Upgrade You-Adjust Pull Weights of 2 and 2½ lbs. Only a Hint of Take-Up/Pre-Travel Very Smooth, No-Flinch Break BONUS BENEFITS Cam-Over Toggle Engine™ Very Hard Hitting Hammer Soft-Start Lock-Up™ for Pre-Ignition Stability Radical Sear Mechanics™ US Patents: 8572880, 9052149, 9175917, 9696103, D817436, 10006733, 10222161 Standard Benefits Semi-Auto Single-Stage Curved Trigger with a Backbone™ Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameterCompatible to Genesis Arms 12 Gauge models NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS PDI® - Power Drop In Trigger Significant AR Upgrade 2 lb. Pull MIL-Grade Hammer Strike, No LPS, Ever H&M BLACKNITRIDE+™ Finish Exceptionally Smooth Feel Enhanced Corrosion Protection Polished Look 9mm PCC Blowback Tough Hammer Collision Bumper Disconnector Crash Protection Disconnector Spring Crush Protection BONUS BENEFITS Curved Trigger Bow with a Backbone™ HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further US Patents: 9052149, 9175917, 9696103, 10006733 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Blowback Systems NOT compatible with HECKLER & KOCH and HAENEL Firearms NOT compatible with SIG SAUER MCX Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS Everyman's AR Trigger You-Adjust Pull Weights of 2½ and 3½ lbs. Virtually No Take-Up/Pre-Travel, Very Smooth Similar to the Competition except with Curved Trigger Bow As Run by Keanu Reeves in John Wick 2 BONUS BENEFITS Cam-Over Toggle Engine™ Very Hard Hitting Hammer Soft-Start Lock-Up™ for Pre-Ignition Stability Radical Sear Mechanics™ US Patents: 8572880, 9052149, 9175917, 9696103, D817436, 10006733, 10222161 Standard Benefits Semi-Auto Single-Stage Curved Trigger with a Backbone™ Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS HIPERFIRE®’s Top-of-the-Line AR Trigger You-Adjust Pull Weights of 2½ and 3½ lbs. Eclipses the Performance of Other Offerings Nickel Bliss™, Electroless Nickel Boron (NiB) Done Right Exceptionally Smooth Feel Enhanced Corrosion Protection Polished Look Virtually No Take-Up BONUS BENEFITS Cam-Over Toggle Engine™ Very Hard Hitting Hammer Soft-Start Lock-Up™ for Pre-Ignition Stability Radical Sear Mechanics™ Straight Trigger Bow HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further US Patents: 8572880, 9052149, 9175917, 9696103, D817436, 10006733, 10222161 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS Designed for the Ultimate In AR Performance You-Adjust Pull Weights of 2½ and 3½ lbs. HIPERFIRE®’s Most Popular Trigger Virtually No Take-Up/Pre-Travel, Very Smooth BONUS BENEFITS  Cam-Over Toggle Engine™ Very Hard Hitting Hammer Soft-Start Lock-Up™ for Pre-Ignition Stability Radical Sear Mechanics™ Straight Trigger Bow HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear US Patents: 8572880, 9052149, 9175917, 9696103, D817436, 10006733, 10222161 COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  Der Adaptable AR-15 Trigger ist ein einstellbarer Short Two-Stage Drop-In Abzug, er wurde entwickelt um die Anforderungen eines Abzuges zu erfüllen der die Genauigkeit und Präzision eines AR in jeder Hinsicht optimieren kann. Alle Adaptable Trigger können schnell und einfach mittels Inbusschlüssel von oben bei geöffnetem Upper justiert werden, weiters ist jeder Abzug für den Betrieb ohne Schmiermittel ausgelegt aufgrund der patentierten Technologie. Abzugsgewicht/Total Pull Weight: 1.134g - 2.268g /2.5lbs - 5.00lbs KOMPATIBILITÄT: TriggerTech AR-15 Abzüge sind kompatibel zu AR-15 Herstellern in allen gängigen Kalibern welche Standard Small Pins (0.154"/ 3,90mm) besitzen, wie z.B. Aero Precision, Anderson, Andro Corp, Bushmaster, CMMG, D.A.R., Daniel Defense, DPMS, Faxon, JP, Lantac, Luvo, Mossberg, Oberland Arms, Tinck Arms, PWS, Radian Weapons, Rainier Arms, SIG 516 / M400, Schmeisser, Windham Weaponry etc. Bei HAENEL CR223 Modelle müssen Hammer/Trigger Pins nach Mil-Spec Diameter (0.154 Zoll) nachgerüstet werden, kompatible Pins siehe unter diesem Artikel, Zubehör. INSTALLATIONSANLEITUNG FÜR BÜCHSENMACHER Der Einbau darf nur von fachkundigen Personen durchgeführt werden Kompatibler TRIGGERTECH AR-15 / AR-10 Safety Selector Kit 90/45 Grad siehe unter diesem Artikel, Zubehör EU- WIDE SHIPPING / AT, DE, BE, FR, IT, LU, NL, DK, IE, GR, PT, ES, FI, SE, EE, LV, LT, MT, PL, SK, SI, CZ, HU, CY, BG, RO, HR TriggerTech hat sich speziell auf die AR- Plattform spezialisiert und entwickelte die FRT ™ Technologie, eine reibungslose Release-Technologie für Abzüge, der Sitz des Unternehmens sowie die Produktion befindet sich in Kanada. Trigger Control Details: Anwendung: 3 Gun,  close quarter engagement,  competition,  harsh environments operations,  high speed shooting,  home defence,  law enforcement,  long range hunting,  military,  precision shooting,  rugged hunting,  target shooting,  varmint hunting. Trigger Control Details Trigger Lever Type: Curved Black Trigger Action: Short Two Stage Action, designed to feel like a 1911 FRT: Yes TKR Technology: Yes CLKR Technology: Yes  FLTWR Technology: Yes  Creep: 0.000" Overtravel: < 0.015" Reset: < 0.030" Reset Feel: Tactile mid force 1st Stage Weight: 0.75lbs - 0.75lbs 2nd Stage Weight: 1.75lbs - 4.25lbs Total Pull Weight: 1.134g - 2.268g /2.5lbs - 5.00lbs Hammer Strike Force: Full Pin Size: Standard Mil-Spec Pin (0.154") Weapon Platform: AR 15Made in Canada Frictionless Release Technology™ Um die Einschränkungen von Gleitreibungsabzügen zu umgehen (alle anderen Abzüge sind Gleitreibungsabzüge), besitzen TriggerTech Abzüge eine patentierte, frei schwebende Rolle die zwischen dem Abzug integriert wurde. Diese Weiterentwicklung ermöglichte die idealste Abzugseigenschaft für jede Anwendung zu erschaffen.TKR Technology™ TriggerTech hat sich vorgenommen einen Abzug mit führender Überhub- und Rückstellsteuerung zu entwickeln. Bei der TKR-Technologie ™ wird ein sogenannter "Ticker" verwendet, dies ist eine Zwischenkomponente die sich frei und unabhängig vom Abzugszüngel drehen lässt um das Lösen des Abzugs zu ermöglichen, ohne dass eine weitere Verschiebung vom Abzugshebel erforderlich ist. Dies minimiert den Nachlauf und gibt der Schusswaffe einen perfekten kurzen Reset.CLKR Technology™ TriggerTech wollte einstellbare Abzüge herstellen mit denen der Schütze ohne grossen Aufwand das Abzugsgewicht schnell, präzise und sicher einstellen konnte. Dies führte zur Entwicklung der CLKR-Technologie ™, einer Kombination aus Arretierung und Stellschraube. Mit dieser kann das Abzugsgewicht mit einzelnen Klicks eingestellt werden, um auch festhalten zu können wieviel an der Einstellung tatsächlich verändert wurde.FLTWR Spring Technology™ Hochleistungs AR-Abzüge sind häufig dafür bekannt dass sie nicht ausreichend kraftvolle Hammerschläge auf den Schlagbolzen liefern. Deshalb hat TriggerTech die FLTWR Spring Technology ™ entwickelt, dies ist eine Flachdraht-Hammerfeder mit mehr Windungen damit mehr Kraft in den Hammer gebracht werden kann. Diese Innovation führt zu einer zuverlässigeren Zündung des Zündhütchens, einer geringeren Variabilität der Geschossgeschwindigkeit und einer längeren Lebensdauer Ihres Abzuges.TriggerTech Levers Mit dem Abzugszüngel verbinden Sie Ihre Waffe, deshalb ist TriggerTech der Meinung dass es perfekt sein sollte. Die Abzugszüngel von TriggerTech haben die perfekte Biegung und die vertikalen Rillen helfen dabei, Ihren Finger an Ort und Stelle zu halten. Abzugszüngel in gerader Ausführung bieten ein anderes Gefühl und ermöglichen dem Schützen auch eine höhere Schusskadenz. Full Description The Adaptable AR Primary Trigger was built to satisfy the demand of having one trigger capable of enhancing the accuracy and precision of an AR in every role. Featuring Frictionless Release Technology™, this drop-in AR trigger has a short, two-stage action, designed to feel like a 1911 trigger, that provides a true zero-creep break, extremely short overtravel, a sub 0.030” tactical reset and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 2.5 - 5.0 lbs in 2oz increments from a set screw with the trigger installed. Due to there being truly zero creep, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. This trigger bears the adaptable name because changing its pull weight does not affect hammer force so you get dependable primer strikes at every weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.  All pull weights and measurements are approximate. The installation guide is directed to experienced professional gunsmiths who understand the workings of their AR rifle and know how to fully detail strip the lower receiver. If you do not have these skills, we strongly suggest you retain the services of a competent professional gunsmith to install your trigger, and perform all important safety checks.

  The Radian Vertex Curved Bow Trigger was designed with functional ergonomics at the center of the design philosophy. The trigger bow is positioned forward of the traditional bow location, enhancing the shooter’s ability to make a straight-back trigger break, and reducing potential for “left and down” or “right and down” trigger pull. The single stage Vertex Trigger features a crisp, 3.5-4 pound break and short reset. The Vertex Trigger’s bow is constructed from 1144 carbon steel, and the hammer from precision machined S7 shock resistant tool steel. The hammer is then wire-EDM finished in the interface areas. The components are captured in a lightweight aluminum housing. The Vertex Trigger is compatible with the AR15 platform, with a design that prevents pin walkout even when using standard hammer and trigger pins. Compatibility: Compatible with AR-15 lowers, manufactured according to mil-spec Diameter NOT compatible with HECKLER & KOCH and HAENEL models Compatibel accessories, see under this article, accessories MADE IN THE USA

  The Radian Vertex Flat Bow Trigger was designed with functional ergonomics at the center of the design philosophy. The trigger bow is positioned forward of the traditional bow location, enhancing the shooter’s ability to make a straight-back trigger break, and reducing potential for “left and down” or “right and down” trigger pull. The single stage Vertex-FB Trigger features a crisp, 3.5-4 pound break and short reset. The Vertex-FB Trigger’s bow is constructed from 1144 carbon steel, and the hammer from precision machined S7 shock resistant tool steel. The hammer is then wire-EDM finished in the interface areas. The components are captured in a lightweight aluminum housing. The Vertex-FB Trigger is compatible with the AR15 platform, with a design that prevents pin walkout even when using standard hammer and trigger pins. Compatibility: Compatible with AR-15 lowers, manufactured according to mil-spec Diameter NOT compatible with HECKLER & KOCH and HAENEL models Compatibel accessories, see under this article, accessories MADE IN THE USA

  BCM® Enhanced Lower Parts Kit for your AR15 Lower ReceiverThis kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;BCM PNT Trigger AssemblyBCM Pistol Grip, Mod 3BCM Enhanced Trigger GuardIn a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM® parts are made in the USA and to the highest standards. Please look at the information below.BCM PNT Trigger Assembly (Polished Nickel Teflon)BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..PolishedThe sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.NickelAn electroless nickel finish is applied for a smoother trigger pull with less grit and reduced felt creep . Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.TeflonTeflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.Bolt Catch and Safety SelectorThe BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.BCM Magazine CatchThe BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.BCM Rear Takedown Pin and Front Pivot PinBCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.BCM Detents and SpringsTakedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.This BCM Enhanced Lower Parts Kit includes:1. BCM PNT Hammer2. Hammer Spring3. BCM PNT Trigger4. Trigger Spring5. Hammer/Trigger Pins6. Disconnector7. Disconnector Spring8. Bolt Catch9. Bolt Catch Plunger10. Bolt Catch Spring11. Bolt Stop Pin12. Rear Pivot Pin13. Buffer Retainer14. Buffer Retainer Spring15. Magazine Catch Button16. Magazine Catch Spring17. Magazine Catch18. Rear Take Down Pin19. Selector (Safety)20. Selector Detent21. Selector Detent Spring22. BCM Enhanced Trigger Guard23. BCM Trigger Guard Pin24. BCM Trigger Guard Screw25. BCM Pistol Grip Mod 3, Grip Screw, Locking Washer26. Take Down/ Pivot Pin Detent27. Take Down/ Pivot Pin Detent SpringAs with all BCM Life Saving Tools , Made in the USA.

  Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does NOT include Trigger Guard, Fire Control Group, or Pistol Grip. Kit Includes: Bolt catch/roll pin Bolt catch plunger/spring Trigger/hammer retaining pins Safety, detent, & spring Magazine catch, spring, & release button Pivot/takedown pins, detents, & springs Buffer retainer/spring MADE IN THE USA

  Fire Control ModuleCurved Trigger   Back and better than ever, the JPFC-M combines the unrivaled quality of a JP trigger with the convenience of a module. This fire control module is a drop-in trigger solution for any AR-type rifle. With multiple easy-to-change trigger styles and colors, the JPFC-M is the right trigger for every shooter and every build.  Each JPFC-M unit includes:  Pre-assembled fire control unit Reversible ambidextrous safety selector with color-matched levers JP Oversized Anti-Walk Pins Alternate hammer spring for both competition or duty applications   Features:  Custom shop quality JP trigger job Quick, easy drop-in installation Wire-cut components for a super-precise parts relationship Eliminated need for adjustment screws Easily changeable trigger styles and colors to suit shooter preference Included ambi safety features swappable levers color-matched to the trigger Unique safety drum design ensures perfect safety function Included JP Anti-Walk Pins remove all slop movement of fire control components for solid, reliable function Easily interchangeable trigger shoes Alternate hammer spring for adjustable pull weight Stainless steel housing   Compatibility: Compatible for AR-15 and AR-10 rifles.   The JPFC-M should not be used in polymer receivers.  NOT compatible with HECKLER & KOCH MR223 & MR308, G28Z and HAENEL CR223 & CR308 models.   MADE IN THE USA

  Fire Control ModuleFlat Trigger   Back and better than ever, the JPFC-M combines the unrivaled quality of a JP trigger with the convenience of a module. This fire control module is a drop-in trigger solution for any AR-type rifle. With multiple easy-to-change trigger styles and colors, the JPFC-M is the right trigger for every shooter and every build. Each JPFC-M unit includes: Pre-assembled fire control unit Reversible ambidextrous safety selector with color-matched levers JP Oversized Anti-Walk Pins Alternate hammer spring for both competition or duty applications Features: Custom shop quality JP trigger job Quick, easy drop-in installation Wire-cut components for a super-precise parts relationship Eliminated need for adjustment screws Easily changeable trigger styles and colors to suit shooter preference Included ambi safety features swappable levers color-matched to the trigger Unique safety drum design ensures perfect safety function Included JP Anti-Walk Pins remove all slop movement of fire control components for solid, reliable function Easily interchangeable trigger shoes Alternate hammer spring for adjustable pull weight Stainless steel housing   Compatibility: Compatible for all AR-15 and AR-10 rifles to Mil-Spec diameter production.   The JPFC-M should not be used in polymer receivers.  NOT compatible with HECKLER & KOCH MR223 & MR308, G28Z and HAENEL CR223 & CR308 models. MADE IN THE USA

  Armaspec Stainless Steel Gun Builder’s Lower Parts Kit less Trigger Group & Grip for AR-15. If you are looking for a high end gun builder's kit, than this one is for you. It incorporates all the great products from Armaspec in one package. FEATURES:  Includes Armaspec Enhanced Lower Parts Compatible with most AR-15 lowers Made in the U.S.A. SPECIFICATIONS:  Material: Aluminum Height: 0.625" Width: 0.625" Wight: 0.18 oz. COMPATIBILITY:  AR-15 Mil-Spec Lower Receiver NOT compatible to AR-10, Haenel and Heckler & Koch models INCLUDES:  1x Armaspec SFT 45/90 Safety Selector 1x Bolt Catch 1x Enhanced Takedown and Pivot Pins 1x Stainless Steel Takedown detent 1x Takedown Detent Spring 1x Stainless Steel Pivot Detent 1x Pivot Detent Spring 1x Stainless Steel Anti-Walk Trigger/Hammer Pins 1x Stainless Steel Buffer Retainer 1x Magazine Catch 1x Magazine Spring 1x Enhanced Magazine Release Button 1x Stainless Steel Bolt Catch Detent 1x Stainless Steel Safety Selector Detent 1x Bolt Catch Roll Pin 1x Bolt Catch Spring 1x Buffer Retainer Spring 1x Selector Detent Spring 1x Hex Keys for Anti-Walk Pins Note: This is “NOT” a complete lower parts kit. This is a builder’s kit. This Kit does NOT include the Pistol Grip, Pistol Grip Screw and Washer, Trigger and Hammer, Trigger and Hammer Springs, Disconnect, Disconnect Spring, Trigger Guard and Roll Pin. MADE IN THE USA

  Advanced performance meets precision machining and ultra slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC. Available in both Hybrid Curve & Flat Bow designs to suit any shooters preference. The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non existent over travel that will greatly decrease split times and give you a big advantage over the competition. The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish. The CNC machined Aluminum cassette has adjustment set screws built in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs. The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification. The evolution of the E-CT1™ is here. Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308. Trigger mechanism manufactured by Timney Triggers.  Informations: Comes complete with Trigger Assembly and Pin Set. ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308 NOT compatible with HECKLER & KOCH and HAENEL models. MADE IN THE USA

  Advanced performance meets precision machining and ultra slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC. Available in both Hybrid Curve & Flat Bow designs to suit any shooters preference. The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non existent over travel that will greatly decrease split times and give you a big advantage over the competition. The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish. The CNC machined Aluminum cassette has adjustment set screws built in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs. The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification. The evolution of the E-CT1™ is here. Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308. Trigger mechanism manufactured by Timney Triggers.  Informations: Comes complete with Trigger Assembly and Pin Set. ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308 NOT compatible with HECKLER & KOCH and HAENEL models.MADE IN THE USA

   Finish your next AR15 lower receiver with the CMMG® ZEROED™ Mk4/AR15 lower parts kit. Every piece is made here in the USA and comes in convenient color-coded packets to make assembly a breeze. Check out our interactive install walkthrough video below or read the CMMG Resources LPK Install article for an in-depth breakdown. Don’t forget a Buttstock or Brace kit to complete your pistol or rifle lower. All parts meet or exceed mil-spec. All installation hardware included. Kit Includes:  ZEROED Extended Bolt Catch AR15 Bolt Catch Plunger, Spring, & Roll Pin ZEROED Trigger Guard, Screw, & Roll PIn Trigger & Trigger Spring Disconnector & Disconnector Spring Hammer & Hammer Spring Trigger/Hammer Retaining Pins ZEROED 60°/90° Adjustable Ambi Safety, Detent, & Spring ZEROED Ambi Magazine Catch & Spring ZEROED Extended Magazine Release Button HD Pivot/Takedown Pins, Detents, & Springs ZEROED Pistol Grip, Grip Screw, & Washer Buffer Retainer & Spring MADE IN THE USA