AR- Hinterschäfte

  The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the integrated Picatinny rail allows for attaching a mono-pod or other accessories and the Anti-rattle set screw allows for adjustment when used with a Mil-spec buffer tube. The MBA-5 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab below. The MBA-5 is Grovtec™ Quick Detach sling cup ready*. Paired with our Chubby Grip® and Palm Handguard® the New MBA-5 is just the right choice for your AR. Note: The MBA-5 is designed with a non-adjustable, flared cheek rest and is not intended to provide vertical adjustment. Order an MBA-3 or add a Cheek Rest Assembly to your MBA-4 for full cheek rest adjust ability on a Carbine butt stock. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit Compatible accessories see under this article, accessories Features: Lightweight Carbine Buttstock MBA Ergonomic Styling Paddle Adjustment Lever for Rapid Positioning Flared Cheek Rest Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides** Rubber Buttpad High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-5 Application: Carbine Length For caliber: .223, .308, 9mm Buttstock Weight: 8.95 oz Extended Length of Pull: 14.5" Collapsed Length of Pull: 11.5" Material: Dupont Zytel 30% glass filled nylon MADE IN THE USA

  The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the integrated Picatinny rail allows for attaching a mono-pod or other accessories and the Anti-rattle set screw allows for adjustment when used with a Mil-spec buffer tube. The MBA-5 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab below. The MBA-5 is Grovtec™ Quick Detach sling cup ready*. Paired with our Chubby Grip® and Palm Handguard® the New MBA-5 is just the right choice for your AR. Note: The MBA-5 is designed with a non-adjustable, flared cheek rest and is not intended to provide vertical adjustment. Order an MBA-3 or add a Cheek Rest Assembly to your MBA-4 for full cheek rest adjust ability on a Carbine butt stock. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit Compatible accessories see under this article, accessories Features: Lightweight Carbine Buttstock MBA Ergonomic Styling Paddle Adjustment Lever for Rapid Positioning Flared Cheek Rest Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides** Rubber Buttpad High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-5 Application: Carbine Length For caliber: .223, .308, 9mm Buttstock Weight: 8.95 oz Extended Length of Pull: 14.5" Collapsed Length of Pull: 11.5" Material: Dupont Zytel 30% glass filled nylon MADE IN THE USA

  The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 Carbine Buttstock is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of-Pull adjustment as well as height and lateral adjustments, and an adjustable cheek rise in a low-cost, lightweight, strong and high-quality design. The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies. The MBA-3 also features an anti-rattle set screw. The modular design of the MBA Buttstock allows you to configure your buttstock to your specific and personal needs. Includes a rail attachment for attaching a monopod. The MBA features multiple attachment points for a sling, including molded pockets that will accept Grovtec QD cups, sold separately. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes  Ergonomic Design Compatible accessories see under this article, accessories Features: Ergonomic Design Adapts To Existing Commercial and Mil-Spec Buffer Tubes Fully adjustable Quick adjust knobs 3-Axis butt plate Integrated bag hook MBA Ergonomic Styling Lever for Rapid Positioning Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides, solds separately High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-3 Application: Carbine Length For caliber: .223, .308 Buttstock Weight: 19.2 oz Extended Length of Pull: 15 5/8" Collapsed Length of Pull: 11 11/16" Overall Extended Length: 8 3/4" Overall Collapsed Length: 7 11/16" Cheek Rise : 1" Fully Extended Additional Length-of-Pull: 1 1/16″ MADE IN THE USA

  The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 Carbine Buttstock is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of-Pull adjustment as well as height and lateral adjustments, and an adjustable cheek rise in a low-cost, lightweight, strong and high-quality design. The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies. The MBA-3 also features an anti-rattle set screw. The modular design of the MBA Buttstock allows you to configure your buttstock to your specific and personal needs. Includes a rail attachment for attaching a monopod. The MBA features multiple attachment points for a sling, including molded pockets that will accept Grovtec QD cups, sold separately. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes  Compatible accessories see under this article, accessories Features: Ergonomic Design Adapts To Existing Commercial and Mil-Spec Buffer Tubes Fully adjustable Quick adjust knobs 3-Axis butt plate Integrated bag hook MBA Ergonomic Styling Lever for Rapid Positioning Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides, solds separately High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-3 Application: Carbine Length For caliber: .223, .308 Buttstock Weight: 19.2 oz Extended Length of Pull: 15 5/8" Collapsed Length of Pull: 11 11/16" Overall Extended Length: 8 3/4" Overall Collapsed Length: 7 11/16" Cheek Rise : 1" Fully Extended Additional Length-of-Pull: 1 1/16″ MADE IN THE USA

  Upgrade your AR15 with our A1 Butt Stock Kit, a comprehensive package that includes everything you need for enhanced performance and comfort. Crafted with precision, this kit includes a durable buffer tube, a reliable buffer, comfortable stock, and a high-quality spring. Whether you’re a seasoned shooter or just starting out, our A1 Butt Stock Kit ensures stability, reliable recoil, and a classic retro look and feel. Elevate your shooting experience with this essential upgrade, designed to meet the demands of discerning firearm enthusiasts. Upgrade today and experience the difference. Available in Black or OD Green The A1 stock is made using modern glass filled nylon making it strong even without a foam core. It does include a screw to attach the stock to the buffer tube. Includes: A1 Butt Stock – BS-A1 Extension tube – BS-09 .223/5.56 Rifle Buffer Spring – BS-10B .223/5.56 Rifle Buffer – BS-11 A1 length screw included in trap door of stock MADE IN THE USA

  Compatible with firearms that include 1913 Picatinny Back Plate/Rail Adaptor. For compatible firearms and accessories, see accessories under this article. Specifications: Shipped for rifle use, also compatible with Gear Head Works tailhook for arm brace use. Cosmetic arm brace plug sold separately to ensure the back beam is smooth.Adjustable polymer cheek piece for comfortable use with all usersAdjustable butt pad for increased usability with plate carriers or heavy gear5 position locking beam with textured button for quick adjustmentHeavy-duty side-folding mechanism constructed from 4140 heat treated steelReversable design for left-handed shootersFull-length locking lug for maximum strengthSolid positive lock up in both positionsSteel clamp with large surface engagementCan be configured to right or left foldingFeatures 3 QD sling attachmentsCurved, adjustable top surface for a comfortable cheek weldAdds 8.0” to overall firearm lengthAdds 0.75” to the length of the firearm in the folded positionConstructed of high strength polymer, aluminum, and steel componentsWeight: 1lb 5oz.Made in the USA Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

  Compatible with firearms that include 1913 Picatinny Back Plate/Rail Adaptor. For compatible firearms and accessories, see accessories under this article. Specifications: Shipped for rifle use, also compatible with Gear Head Works tailhook for arm brace use. Cosmetic arm brace plug sold separately to ensure the back beam is smooth.Magpul FDE CerakoteAdjustable polymer cheek piece for comfortable use with all usersAdjustable butt pad for increased usability with plate carriers or heavy gear5 position locking beam with textured button for quick adjustmentHeavy-duty side-folding mechanism constructed from 4140 heat treated steelReversable design for left-handed shootersFull-length locking lug for maximum strengthSolid positive lock up in both positionsSteel clamp with large surface engagementCan be configured to right or left foldingFeatures 3 QD sling attachmentsCurved, adjustable top surface for a comfortable cheek weldAdds 8.0” to overall firearm lengthAdds 0.75” to the length of the firearm in the folded positionConstructed of high strength polymer, aluminum, and steel componentsWeight: 1lb 5oz.Made in the USA Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

Specifications: 1913 Picatinny adaptor for side folding stocks and bracesSimple installationExtremely lightweight designFeatures anti-rotation QD sling swivel socketConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R Compliant COMPATIBILITY: Compatible with HK MP5K and clones such as Century AP5K, Zenith ZF5K and Military Arms Corporation MAC 5K.*Fitting may be required. There is variation between clones and HK SP5's that may require gunsmith installation*This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 3oz Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

Specifications: 1913 Picatinny adaptor for side folding stocks and bracesSimple installationExtremely lightweight designFeatures anti-rotation QD sling swivel socketConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R Compliant COMPATIBILITY: Compatible with HK MP5 and clones such as Century AP5, Zenith ZF5 and Military Arms Corporation MAC 5.*Fitting may be required. There is variation between clones and HK SP5's that may require gunsmith installation*This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 5oz Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

  Compatible with firearms that include 1913 Picatinny Back Plate/Rail Adaptor.For compatible firearms and accessories, see accessories under this article. Side Folder Specs: Heavy-duty side-folding mechanism constructed from 4140 heat treated steel Full-length locking lug for maximum strength Solid positive lock up in both positions Steel clamp with large surface engagement Can be configured to right- or left-folding Features 5 QD sling attachments Stock is made from Hard Coat Anodized 6061 Aluminum Extremely rigid triangular design Curved top surface for a comfortable cheek weld Adds 9.0” to overall firearm length Adds 0.75” to the length of the firearm in the folded position Complete assembly weight: 15.5 oz. Steel parts are mag phosphate finished MADE IN THE USA

  The Magpul ACS-L (Adaptable Carbine Stock - Light) Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. PLENTY OF CHEEK WELD Sloping cheek weld provides a wide contact surface for user comfort AR STOCK WITH STORAGE Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below) Storage compartment in tail of stock with positive latching access door on right hand side SHIELDED RELEASE LATCH Supplemental friction lock minimizes accuracy robbing wobble*. Shielded release latch prevents snagging and accidental operation ANTI-SLIP RUBBER BUTT-PAD Replaceable rubber 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments LONG LASTING ADJUSTABILITY Premium chrome-silicon lock spring provides positive locking and long service life Sling Mounts: Mid - Included reversible Sling Mount Kit -TYPE 3 fits up to 1.5" push-button swivels (swivel not included) Rear/Bottom - 1.00" sling loop Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Collection Collapsible Storage AR Stocks Platform  AR10, AR15, M4, M16, M110, SR25 LOP, M4 Collapsed    ~11.3 in. LOP, M4 Extended     ~14.6 in. LOP Adjustment Range              3.3 in. Length, max             7.9 in. Height, max             5.2 in. Weight     12.4 oz. Weight, w/ receiver extension   ~16.2 oz. Width, max              2.2 in. Width of Butt, max   1.7" Compatible accessories see under this article, accessories.             *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The ACS-L Carbine Stock will only fit with the common Mil-Spec tube.Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.Friction lock performance may vary depending on the host receiver extension's dimensional tolerances. MADE IN THE USA

  Like the Gen 6, the Gen 7 is a CQB stock built for comfort and durability for real-world use. No buttons to push, just pull the stock to deploy. At its most collapsed position, this CQB stock only adds 5.35” to your AR15. At full extension, the Maxim CQB stock is the length of an extended carbine stock. And with 4 total positions you can adjust for maximum comfort and multiple scenarios. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense CQB Stock is simply the most thought out, versatile, and durable CQB stock on the market. The Gen 7 is for those who want a sleeker profile, eliminating the side sling swivel attachment points from the housing. Instead, the Gen 7 comes with our ambidextrous sling mount already installed. Features Works on AR15 platforms Keep your existing bolt carrier group Decreases overall length of PDW’s Interchangeable buttstock assemblies Military grade materials Rapid deployment Full auto compatible Ambidextrous Sling Mount  Compatibility Compatible with AR-15 Mil-Spec Lower Receivers Compatible with AR-15 Mil-Spec Bolt Carrier Groups Compatible with Caliber 5.56 / .223 REM / 7,62x39 / .300AAC Buffer NOT for Large Frame Calibers (LR308, AR-10, etc.) Lightweight BCG's may cause damage the buffer 9mm platforms damage the buffer Package Contents MAXIM DEFENSE AR-15 CQB Gen 7 Stock MAXIM DEFENSE Spring, Carbine Lenght MAXIM DEFENSE Buffer, Standard Weight 3.3 oz Informations The color may vary during the anodising process, product images are examples Compatible accessories see under this article, accessories Recommended tool for installation, see under this article, accessories Technical Specifications Adjustable Close Quarters Battle AR-15 Stock Easily Installation Extended Cheek Weld 5.3" closed 6.8" 1st position 8.3" 2nd position 10" fully extended Weight: 18.50 oz Material: 7075 Aluminum Alloy housing Color: Mil-Spec III FDE Anodizing, color may vary during the anodising process, product images are examples  MADE IN THE USA

   ACE Skeletonized Buttstock Kit for AR-15/AR-10 for Premium Builds. Multiple sling points are but one of the many features that make this lightweight, aluminum stock ideal for competition, sporting and tactical use. Closed-cell, foam over-tube provides a soft, comfortable cheek weld, plus insulates your face from vibration and inclement weather. Over-tube is formulated to withstand cleaning solvents and gun oils, UV radiation, freezing temperatures, salt water and rough handling. Machined aluminum buttplate is drilled and tapped for rubber Butt Pad (included). ACE LTD. is a Division of DOUBLESTAR CORP.NOTE: Installation requires A2 Rifle lenght buffer tube, rifle buffer, and rifle buffer spring! A2 Rifle lenght buffer tube, rifle buffer, and rifle buffer spring NOT included! Compatible accessories, see under this article, accessories Features: Supplied with a Grovetc QD sling swivelTwo additional Uncle Mike's sling attachment pointsUses your existing A2 fixed stock buffer tube as the top tube to keep weight to a minimum  MADE IN THE USA

All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market. Specifications: NSN: 1005226366907Mil-Spec size 1.148 diameter receiver extensions (buffer tube)Weight: 5.8ozHeight: 5.22"Width: 1.752"Length: 7.084" Features: Slide-on replacement for collapsible butt stockAngled non-slip rubberized buttpad allows faster presentation, even with body armorMultiple Sling Slots with single point mountingQuick Detach Sling mounting point is positioned for optimum usage including ambidextrous shootersUpper section provides enhanced cheek weldMil-Spec Buffer Tube Spec MADE IN THE USA Compatibility: Mil-Spec Buffer Tube Spec, Carbine LengthCompatible accessories see under this article, accessories

All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market. Specifications:NSN: 1005226366908 Mil-Spec size 1.148 diameter receiver extensions (buffer tube)Weight: 5.8ozHeight: 5.22"Width: 1.752"Length: 7.084" Features: Slide-on replacement for collapsible butt stockAngled non-slip rubberized buttpad allows faster presentation, even with body armorMultiple Sling Slots with single point mountingQuick Detach Sling mounting point is positioned for optimum usage including ambidextrous shootersUpper section provides enhanced cheek weldMil-Spec Buffer Tube Spec MADE IN THE USA Compatibility: Mil-Spec Buffer Tube Spec, Carbine LengthCompatible accessories see under this article, accessories

  Bravo Company introduces the BCM® Stock Assembly - Mod 0 - SOPMOD (Widebody). The strongest light-weight polymer stock available for your mil-spec receiver extension is here!   More pronounced cheekweld (SOPMOD type) Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit. Modular VBOST (Vehicle Borne Operations Sling Tab) This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle. 2 different types of ambidextrous sling mounting options, including QD swivel sockets. Simple modular design. 6 parts, and 1 screw allow for modular adaption of future stock options and configurations. United States Patent Number: 9,109,855 MADE IN THE USA

   The DT-PR stock is the Precision Rifle (PR) variant of our new Dual-Tension (DT) series of carbine stocks. It incorporates Magpul’s proprietary, patent-pending DT adjustment system, mitigating play between the buffer tube and the stock, resulting in a tighter fit across the stock’s entire length of pull. It also minimizes snagging of facial hair and skin where the shooter’s face contacts the stock. The DT-PR has a contoured butt-pad for improved shoulder purchase and minimal contact with the collar bone, allowing shooters to maintain comfort during heads-up and heads-down shooting with various optics. The extended bottom of the stock provides shooters with an exceptionally steady contact point on squeeze bags for more precise shots when prone, while remaining entirely functional as an on-the-move tactical platform. The DT-PR includes an ambidextrous, rotation-limited QD cup for sling attachment. It's also compatible with Magpul’s legacy CTR Cheek Risers when the stock is fully extended or on rifles without rear-facing charging handles, giving shooters adjustable comb height for improved efficiency in target acquisition and field of view. For a lot less than other precision stocks, the DT-PR provides an incredibly steady platform combined with better control. NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Side mounting slots accept optional CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Includes ambidextrous, rotation-limiting sling swivel sockets and a footmans loop for different sling mounting options MADE IN THE USA

  The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk. A rolled toe and angled rubber butt-pad are optimized for use with body armor, and an ambidextrous QD sling swivel socket is included. A unique leaf-spring tension system provides a solid fit on mil-spec receiver extensions, with slightly less friction than the original SL. The MOE SL-S is the most intuitive, comfortable, and efficient storage stock available. WATERPROOF  STORAGE Two water-resistant battery storage tubes located on the left and right sides of the stock. Each tube will store up to two (2) CR123A lithium or AA batteries. Tubes are accessible from the rear in any stock position via hand-removable, o-ringed rubber plugs that are waterproof to 10 meters ENHANCED CHEEK WELD RUBBER BUTT-PAD Offers anti-slip surface and increases impact protection Sloping cheek weld combines a slim profile with user comfort LONG LASTING ADJUSTABILITY Premium chrome-silicon lock spring provides positive locking and long service life. Dual-side release latch provides easy adjustment while remaining snag-free. Internal anti-rattle leaf spring minimizes wobble on receiver extension tube COMPATIBILITY Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) SLING POINT VARIETY  Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Sling Mounts: Rear - Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops ROLLOVER TOE TO FIT YOUR GEAR Rollover on the toe allows for easier shoulder transitions and better fit when using body armor MAG653 MOE® SL-S™ Carbine Stock – Mil-Spec Installation Instructions TECHNICAL SPECIFICATIONS  Platform AR10, AR15, M4, M16, M110, SR25 Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others LOP, M4 Collapsed ~10.9 in. LOP, M4 Extended ~14.2 in. LOP Adjustment Range 3.3 in. Length, max 7.3 in. Weight 12.8 oz. Weight, w/ receiver extension 16.8 oz. Width, max 2.4 in. Other Specs * Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec.The MOE SL-S will only fit with the common Mil-Spec tube. MADE IN THE USA

   The MOE RL (Reversed Lever) Carbine Stock is a streamlined, A-frame design that replaces OEM stocks and provides clean aesthetics and ease of use. The easily accessible, unobtrusive, reversed adjustment lever is inset into the front of the stock, allowing the stock’s length of pull to be adjusted in overall length from 10.7ʺ to 14ʺ*. The stock also offers a slightly increased cheek-weld area for enhanced shooter comfort. Combining these two aspects of the MOE RL Carbine stock allows shooters to adjust the LOP on the fly if necessary while maintaining a positive check weld; this keeps the shooter locked into the gun and promotes continued situational awareness.  To further increase shooter comfort, the MOE RL Stock is compatible with the MOE SL® Enhanced Rubber Butt-Pad so shooters can use the recoil pad that best fits their circumstances. For sling attachment, the RL includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount.  Weight, w/ receiver extension ~12.1 oz. Width, max 1.7 in. Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The MOE RL Carbine Stock will only fit with the common Mil-Spec tube. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates. MADE IN THE USA

   The MOE RL (Reversed Lever) Carbine Stock is a streamlined, A-frame design that replaces OEM stocks and provides clean aesthetics and ease of use. The easily accessible, unobtrusive, reversed adjustment lever is inset into the front of the stock, allowing the stock’s length of pull to be adjusted in overall length from 10.7ʺ to 14ʺ*. The stock also offers a slightly increased cheek-weld area for enhanced shooter comfort. Combining these two aspects of the MOE RL Carbine stock allows shooters to adjust the LOP on the fly if necessary while maintaining a positive check weld; this keeps the shooter locked into the gun and promotes continued situational awareness.  To further increase shooter comfort, the MOE RL Stock is compatible with the MOE SL® Enhanced Rubber Butt-Pad so shooters can use the recoil pad that best fits their circumstances. For sling attachment, the RL includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount.  Weight, w/ receiver extension ~12.1 oz. Width, max 1.7 in. Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The MOE RL Carbine Stock will only fit with the common Mil-Spec tube. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates. MADE IN THE USA

   The new DT-PR stock is the Precision Rifle (PR) variant of our new Dual-Tension (DT) series of carbine stocks. It incorporates Magpul’s proprietary, patent-pending DT adjustment system, mitigating play between the buffer tube and the stock, resulting in a tighter fit across the stock’s entire length of pull. It also minimizes snagging of facial hair and skin where the shooter’s face contacts the stock. The DT-PR has a contoured butt-pad for improved shoulder purchase and minimal contact with the collar bone, allowing shooters to maintain comfort during heads-up and heads-down shooting with various optics. The extended bottom of the stock provides shooters with an exceptionally steady contact point on squeeze bags for more precise shots when prone, while remaining entirely functional as an on-the-move tactical platform. The DT-PR includes an ambidextrous, rotation-limited QD cup for sling attachment. It's also compatible with Magpul’s legacy CTR Cheek Risers when the stock is fully extended or on rifles without rear-facing charging handles, giving shooters adjustable comb height for improved efficiency in target acquisition and field of view. For a lot less than other precision stocks, the DT-PR provides an incredibly steady platform combined with better control. NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Side mounting slots accept optional CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Includes ambidextrous, rotation-limiting sling swivel sockets and a footmans loop for different sling mounting options MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 3/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG327-BLK 1005-01-591-6041 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA 

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 3/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG327-BLK 1005-01-591-6041 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA  

The DT Carbine Stock is a drop-in replacement buttstock for AR15/M16/M4 carbines (or comparable platforms) equipped with Mil-Spec profile receiver extensions. It merges the best features of the SL® and CTR® product lines with its new dual tensioning technology, which provides greater strength and security for a more rugged and stable platform that’s easy to adjust. The DT Stock is an A-frame style carbine stock that features an auto-engaging friction lock that’s reflexive and inert during adjustment. This produces additional tension on the buffer tube, providing extra tight lockup that minimizes movement between the stock’s lock pin and receiver extension. The result is increased durability in case of severe impacts and quick, smooth, and frictionless length-of-pull adjustments on the fly. Other features include a unique, non-slip butt-pad that matches the footprint of the SL line and incorporates the optimized curvature from the CTR, an ambidextrous adjustment lever, a rotation-limiting QD sling mount, and a 1.25” footman’s loop. NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, FN and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when using body armor Sloping cheek weld combines a slim profile with user comfort Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear 1.25" sling loop Rotation-limiting, integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA