AR- Sicherungen

  The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.  NOT compatible with HECKLER & KOCH MR308 / G28Z and HAENEL CR308 models. Patent Number: US9557128 Designed & Manufactured in the USA 2-Lever Combo: Short + Long Levers Machined from Billet aircraft grade aluminum w. Milspec Type 3 Hard Coat Anodized  Center Shaft Machined from Hardened Steel w/ Black Nitride Finish MADE IN THE USA

  The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.  NOT compatible with HECKLER & KOCH MR308 / G28Z and HAENEL CR308 models. Patent Number: US9557128 Designed & Manufactured in the USA 2-Lever Combo: Short + Long Levers Machined from Billet aircraft grade aluminum w. Milspec Cerakote Center Shaft Machined from Hardened Steel w/ Black Nitride Finish MADE IN THE USA

  Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does NOT include Trigger Guard, Fire Control Group, or Pistol Grip. Kit Includes: Bolt catch/roll pin Bolt catch plunger/spring Trigger/hammer retaining pins Safety, detent, & spring Magazine catch, spring, & release button Pivot/takedown pins, detents, & springs Buffer retainer/spring MADE IN THE USA

  The ST45 is an ambidextrous 45 degree safety selector for the AR10/ AR15 platform. Instead of having a full 90 degree rotation to disengage the safety, this selector is set to fire at around the 45 degree point. This allows the operator to flick the lever to disengage from safety. This safety selector is incredibly smooth and has a super crisp lockup. It is designed for firearms that have the correct “FIRE” markings on the receiver to match the 45 degree fire position of this safety selector. Do not use on lowers without the 45 degree “FIRE“ markings on the receiver. If you have a receiver that does not have the correct markings, you should use the FT90 safety selector. Pat. Pend. SPECIFICATIONS:  Material: Aluminum / Steel Finish: Black Anodized  COMPATIBILITY:  AR-15 and AR-10  INCLUDES:  1x ST45 Short Throw Ambi Safety Selector  Torx Screws  1x Hex Key MADE IN THE USA

  The ST45 is an ambidextrous 45 degree safety selector for the AR10/ AR15 platform. Instead of having a full 90 degree rotation to disengage the safety, this selector is set to fire at around the 45 degree point. This allows the operator to flick the lever to disengage from safety. This safety selector is incredibly smooth and has a super crisp lockup. It is designed for firearms that have the correct “FIRE” markings on the receiver to match the 45 degree fire position of this safety selector. Do not use on lowers without the 45 degree “FIRE“ markings on the receiver. If you have a receiver that does not have the correct markings, you should use the FT90 safety selector. Pat. Pend. SPECIFICATIONS:  Material: Aluminum / Steel Finish: FDE Cerakoted  COMPATIBILITY:  AR-15 and AR-10  INCLUDES:  1x ST45 Short Throw Ambi Safety Selector  Torx Screws  1x Hex Key MADE IN THE USA

  The Magpul ESK (Enhanced Selector Kit) – AR is a modular, ambidextrous selector kit designed for AR pattern firearms that provides user-configurable selectors with modern ergonomics at an accessible price. The selector axle is reversible for 60 or 90-degree throw options and is made of fully-machined, heat-treated chromoly steel with a QPQ finish for extreme resistance to wear and corrosion. The ESK – AR includes three heavy-duty polymer levers - Full-Length, Short, and Hybrid - which can be mounted as desired by pressing onto either side of the axle's keyways with zero wobble. The selector pins come in black and red for user preference and act as non-load bearing secondary lever locks as well as selector position indicators. Installing the kit is extremely easy once the grip is removed, and if you ever want to reconfigure your levers all that’s required is a small punch or hex key to pop the selector pin back out. The kit also includes a spring and corrosion-resistant detent with low-friction coating for smooth yet positive function. Designed for Mil-Spec AR-pattern lower receivers CONSTRUCTED OF HIGH-STRENGTH POLYMER AND CORROSION-RESISTANT STEEL Easy drop-in installation Made in the USA Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 NOT compatible with HECKLER & KOCH and HAENEL models NOT compatible with select fire receivers

  The Magpul ESK (Enhanced Selector Kit) – AR is a modular, ambidextrous selector kit designed for AR pattern firearms that provides user-configurable selectors with modern ergonomics at an accessible price. The selector axle is reversible for 60 or 90-degree throw options and is made of fully-machined, heat-treated chromoly steel with a QPQ finish for extreme resistance to wear and corrosion. The ESK – AR includes three heavy-duty polymer levers - Full-Length, Short, and Hybrid - which can be mounted as desired by pressing onto either side of the axle's keyways with zero wobble. The selector pins come in black and red for user preference and act as non-load bearing secondary lever locks as well as selector position indicators. Installing the kit is extremely easy once the grip is removed, and if you ever want to reconfigure your levers all that’s required is a small punch or hex key to pop the selector pin back out. The kit also includes a spring and corrosion-resistant detent with low-friction coating for smooth yet positive function. Designed for Mil-Spec AR-pattern lower receivers CONSTRUCTED OF HIGH-STRENGTH POLYMER AND CORROSION-RESISTANT STEEL Easy drop-in installation Made in the USA Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 NOT compatible with HECKLER & KOCH and HAENEL models NOT compatible with select fire receivers

  Hochwertige AR-15 / AR-10 MIL-SPEC Ambidextrous Safety von TINCK ARMS. Gefertigt aus 7075-T6 Aluminium, Harteloxierung nach MIL-SPEC, beidseitig bedienbar, kann wahlweise für die beidseitige Nutzung der 90 oder 45 Grad Stellung verbaut werden und ermöglicht somit eine individuelle Konfiguration für jeden Anwender. Schnelle werkzeuglose Montage, einfach Zerlegepin drücken und Sicherungsflügel abziehen, ident wie RADIAN WEAPONS TALON® Safetys.   Kompatibel zu allen AR-15 / M16 / AR-10 Lower Receiver welche nach MIL-SPEC Diameter gefertigt wurden.  NICHT kompatibel zu HECKLER & KOCH MR308 und G28Z sowie zu HAENEL CR308 Modellen.   High quality AR-15 / AR-10 MIL-SPEC Ambidextrous Safety from TINCK ARMS. Made of 7075-T6 aluminum, hard anodization according to MIL-SPEC, can be operated from both sides in the 90 or 45 degree position and thus enables an individual configuration for each user. Compatible with all AR-15 / M16 / AR-10 lower receivers which were manufactured according to the MIL-SPEC diameter. NOT compatible with HECKLER & KOCH MR308 and G28Z as well as HAENEL CR308 models.

  Hochwertige AR-15 / AR-10 MIL-SPEC Ambidextrous Safety von TINCK ARMS. Gefertigt aus 7075-T6 Aluminium, Harteloxierung nach MIL-SPEC, beidseitig bedienbar, kann wahlweise für die beidseitige Nutzung der 90 oder 45 Grad Stellung verbaut werden und ermöglicht somit eine individuelle Konfiguration für jeden Anwender. Schnelle werkzeuglose Montage, einfach Zerlegepin drücken und Sicherungsflügel abziehen, ident wie RADIAN WEAPONS TALON® Safetys.   Kompatibel zu allen AR-15 / M16 / AR-10 Lower Receiver welche nach MIL-SPEC Diameter gefertigt wurden.  NICHT kompatibel zu HECKLER & KOCH MR308 und G28Z sowie zu HAENEL CR308 Modellen.   High quality AR-15 / AR-10 MIL-SPEC Ambidextrous Safety from TINCK ARMS. Made of 7075-T6 aluminum, hard anodization according to MIL-SPEC, can be operated from both sides in the 90 or 45 degree position and thus enables an individual configuration for each user. Compatible with all AR-15 / M16 / AR-10 lower receivers which were manufactured according to the MIL-SPEC diameter. NOT compatible with HECKLER & KOCH MR308 and G28Z as well as HAENEL CR308 models.

   Finish your next AR15 lower receiver with the CMMG® ZEROED™ Mk4/AR15 lower parts kit. Every piece is made here in the USA and comes in convenient color-coded packets to make assembly a breeze. Check out our interactive install walkthrough video below or read the CMMG Resources LPK Install article for an in-depth breakdown. Don’t forget a Buttstock or Brace kit to complete your pistol or rifle lower. All parts meet or exceed mil-spec. All installation hardware included. Kit Includes:  ZEROED Extended Bolt Catch AR15 Bolt Catch Plunger, Spring, & Roll Pin ZEROED Trigger Guard, Screw, & Roll PIn Trigger & Trigger Spring Disconnector & Disconnector Spring Hammer & Hammer Spring Trigger/Hammer Retaining Pins ZEROED 60°/90° Adjustable Ambi Safety, Detent, & Spring ZEROED Ambi Magazine Catch & Spring ZEROED Extended Magazine Release Button HD Pivot/Takedown Pins, Detents, & Springs ZEROED Pistol Grip, Grip Screw, & Washer Buffer Retainer & Spring MADE IN THE USA

  The Schmid Tool 90 degree ambidextrous safety selector is compatible with AR15 Mil-spec, M4E1, and M5 lower receivers. Includes safety levers for both sides of the lower receiver allowing manipulation for both left and right-handed shooting techniques. INCLUDES: Safety assembly Left-handed safety lever Attachment Screw Specs: Compatible with AR-15/M16, M4E1 and M5 Mil-Spec Lower Receiver Compatible with SR25 / LR-308 Lower Receiver NOT compatible to H&K or Haenel AR- models   MADE IN THE USA

   BAD-ASS Night Switch™ Ambidextrous Safety Selector with Green Tritium Compatibility:  AR-15 / AR-10 Mil-Spec Lower Receivers Features:  Includes Custom Screws, Standard Detent, and Spring Brightest Tritium on the market CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Built in the USA with Swiss Tritium MADE IN THE USA

  Replaces your standard safety selector to accommodate left and right-handed shooters. Features mil-spec style selector levers and standard 90° throw operation. CMMG is constantly looking for new ways to improve their products, processes and company at large. All CMMG is constantly looking for new ways to improve their products, processes and company at large. All CMMG parts are made in the United States from the best materials available. CMMG guarantees its products against defects in material or workmanship for the life of the product.Replace your standard right handed AR-15 with an ambidextrous safety switch. Allows you to flip the safety off and on with either hand. Made from milled steel. Includes screw and wrench for installation.Features and Specifications: Manufacturer Number: 55CA6D9 Ambidextrous Meets or Exceeds Mil-Spec Milled Steel MADE IN THE USA

   HIGHLIGHTS HIPERSWITCH®, High Performance Safety/Selector Ambidextrous Safety for AR15/10 BONUS BENEFITS 100% Compatible with HIPERFIRE® Triggers and other MIL Compatible Triggers 60 deg Short Throw Between SAFE and FIRE (much safer than 45 degree versions that can be rotated into FIRE by the trigger when on SAFE) HIPERSWITCH Levers Uniquely Designed for Tactile Access Selection Action Feel Shorter than 60 deg Molded from an Engineered Polymer Composite for Impact Available in solid RED or BLACK Color Selector Shaft Machined from 8620 Alloy Steel Case Hardened for a Precision Feel and Durability STANDARD BENEFITS Easy to Install by the User Included Packaged Parts 2 Levers 1 Shaft 2 Lever Set Screws 1 Safety Detent 1 Safety Detent Spring 1 Allen Set Screw Allen key COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons MADE IN THE USA

   HIGHLIGHTS HIPERSWITCH®, High Performance Safety/Selector Ambidextrous Safety for AR15/10 BONUS BENEFITS 100% Compatible with HIPERFIRE® Triggers and other MIL Compatible Triggers 60 deg Short Throw Between SAFE and FIRE (much safer than 45 degree versions that can be rotated into FIRE by the trigger when on SAFE) HIPERSWITCH Levers Uniquely Designed for Tactile Access Selection Action Feel Shorter than 60 deg Molded from an Engineered Polymer Composite for Impact Available in solid RED or BLACK Color Selector Shaft Machined from 8620 Alloy Steel Case Hardened for a Precision Feel and Durability STANDARD BENEFITS Easy to Install by the User Included Packaged Parts 2 Levers 1 Shaft 2 Lever Set Screws 1 Safety Detent 1 Safety Detent Spring 1 Allen Set Screw Allen key COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons MADE IN THE USA

  With customization and economy of effort in mind, the 60/90 AMBI allows the end user the choice of selector switch degree to suit their personal shooting style. Whether you prefer short throw or a conventional selector switch lever; the SI 60/90 allows for easy configuration for strong side only or bilateral weapons manipulations. COMPATIBILITY: AR-15 / AR-10 forged and milled Mil-Spec Lowers  NOT COMPATIBLE: HAENEL and HECKLER & KOCH models With customization and economy of effort in mind, the 60/90 AMBI allows the end user the choice of selector switch degree to suit their personal shooting style. Whether you prefer short throw or a conventional selector switch lever; the SI 60/90 allows for easy configuration for strong side only or bilateral weapons manipulations. Package include:-x1 AR-HS-60/90-AMBI-x2 HEX ambidextrous selector switch w/mount-x1 End cap-x2 M3x6mm countersunk screws Features:-60/90 degree Ambi-Machined and Heat Treated-Custom HEX design-Groove cuts for secure gripMADE IN THE USA

  JP Adjustable AR-15 Reversible Ambidextrous Selector Kit The JP adjustable, reversible selector can be used to eliminate the safety fitting process for most any Mil-spec or aftermarket fire control components. This ambi kit includes teh safety drum, hardware and choice of two levers. Compatibility This safety selector is designed to allow perfect safety fitment with most any AR fire control components. It assumes a trigger design somewhat similar to a Mil-spec design and so may not work with triggers that deviate radically from such designs. Known incompatibilities include Geissele triggers, which cannot achieve enough trigger travel to release the hammer. Replacing any original JP fire control components with non-JP components may render the JP adjustable safety nonfunctional by allowing the rifle to fire on safe. For example, some two-stage triggers will not interface with the JP adjustable safety, which will not fully block the trigger in the safe position and allow the trigger to function even with the safety engaged. If you install a non-JP trigger system in the JP adjustable safety, it is imperative to verify its function.     Product Instructions MADE IN THE USA

  Der D.A.R. Safety Selector Kit 90/45 Grad, das ultimative Tuning für AR-15 und AR-10 Schusswaffen. Kompatibel zu allen AR-15/AR-10 Mil-Spec Lower wie z.B. von ANDERSON, ANGSTADT ARMS, BUSHMASTER, DPMS, FAXON, PWS, SIG SAUER 516/716, T73, WINDHAM, HERA, DPMS, OBERLAND ARMS, SCHMEISSER etc. Nicht kompatibel zu HAENEL und HECKLER&KOCH AR-15/AR-10 Modellen Kann wahlweise für die beidseitige Nutzung von der 90 oder 45 Grad Stellung verbaut werden, zusätzlich sind die unterschiedlichen Wahlhebel beidseitig austauschbar und ermöglichen somit eine individuelle Konfiguration für jeden Anwender.  Jedem Kit liegen vier Wahlhebel für die unterschiedlichsten Kombinationen bei, einfacher und schneller Einbau.  Die Wahlhebel bestehen aus hochwertigen Polymer-Kunststoff, die Achse besteht aus Waffenstahl und ist DAR typisch Tenifer QPQ oberflächenbehandelt. MADE IN GERMANY

  The AR Ambidextrous Safety Selector Switch is a must-have accessory for any serious firearm enthusiast. This switch allows for easy switching between safe and fire modes, with a design that is ambidextrous and easy to use with either hand. Its durable construction ensures it can withstand the toughest shooting conditions. Upgrade your AR with the Ambidextrous Selector/Safety Switch. Features: Finish: Manganese Phosphate Mil-Spec Specs: Overall Length: 1.45" Width: 1.13" Weight lbs: .05 Weight Ounce: .72 Informations: Compatible to AR-15 Mil-Spec Lower Receiver Compatible accessories see under this article, accessories What’s in a name? The Luth name is synonymous with Experience, Expertise, Knowledge, Innovation, and has been a driving force in the firearm industry for close to 40 years. Starting as a machinist 40 years ago Randy Luth founded D.P.M.S. / Panther Arms and grew the company to become one of the leading manufacturers of AR-15 firearms and firearm components in the world. MADE IN THE USA   

  The AR Safety Selector Switch is a must-have accessory for any serious firearm enthusiast. This switch allows for easy switching between safe and fire modes, with a design that is easy to use with either hand. Its durable construction ensures it can withstand the toughest shooting conditions. Upgrade your setup with the Selector/Safety Switch. Informations:  Compatible to AR-15 Mil-Spec Lower For semi-auto AR-15 applications Finish: Manganese Phosphate MADE IN THE USA

  Mil-Spec AR-15 Ambidextrous Safety Selector KIT, compatible with all AR-15 Mil-Spec Lower Receivers   Every part manufactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON. ANDERSON MANUFACTURING 

  The SI Flip Switch is a lightweight, low profile ambidextrous safety. Created to fill the gap between our basic but functional Hex Selector Switch and the larger go-fast Strike Switch, the Flip Switch features carefully designed ergonomics to facilitate positive, but comfortable engagement and disengagement even when wet despite its compact, low drag size. The SI Flip Switch is a lightweight, low profile ambidextrous safety.  Created to fill the gap between our basic but functional Hex Selector Switch and the larger go-fast Strike Switch, the Flip Switch features carefully designed ergonomics to facilitate positive, but comfortable engagement and disengagement even when wet despite its compact, low drag size.  For those looking to upgrade the aesthetics of their AR, the Flip Switch is offered in our full anodized color line for that custom touch. Package includes:- 2x Shaft Screw- 1x 60/90 Shaft- 1x End Cap- 1x Right Side Flip Switch- 1x Left Side Flip Switch Features- Ambidexterous- Ergonomic Shape- Modular Assembly- Strike 60/90 Option COMPATIBILITY: AR-15 forged and milled Mil-Spec Lowers  NOT COMPATIBLE: HECKLER & KOCH MR308 / G28Z and HAENEL CR308 models NOT COMPATIBLE with Hiperfire triggersMADE IN THE USA

  Ergonomic, intuitive, and fast.  The Strike Switch is a patent pending modular safety selector designed from inception using human factor considerations to aid positive on safe, on fire manipulations.  The unique toggle action allows one to quickly engage the safety when moving positions without altering the firing grip. The extended lever arm serves as an index point and thumb rest in either position.  Adding to the modularity, the Strike Switch is end user configurable to use a 60 or 90 Degree throw, left hand, right hand, or ambidexterous configurations.  The levers are machined from lightweight, but strong aircraft grade aluminum for weight savings, while the safety shaft itself is machined from high strength steel for a lifetime of use. Package includes:- 2x Shaft Screw- 1x 60/90 Shaft- 1x End Cap- 1x Right Side Strike Switch- 1x Left Side Strike Switch Features- Ambidexterous- Ergonomic Shape- Modular Assembly- Precision Machined- Strike 60/90 Option- Aircraft Grade 6061-T6 Aluminum Levers with Steel Selector Shaft COMPATIBILITY: AR-15 forged and milled Mil-Spec Lowers  NOT COMPATIBLE: HECKLER & KOCH MR308 / G28Z and HAENEL CR308 models NOT COMPATIBLE: .308 pattern lower receivers with shelf (DPMS, Bushmaster), ATI Omni Hybrid (all calibers), Seekins Precision SP 223 Gen 2, or F-1 Firearms Receivers, without modification to receiver or selector switch.MADE IN THE USA

  Der TRIGGERTECH Safety Selector Kit 90/45 Grad, das ultimative Tuning für jede AR-15 oder AR-10 in jedem Kaliber, komplett aus 440C Edelstahl gefertigt, anschliessend  DLC hartbeschichtet. Beste Verarbeitungsqualität, unübertroffen.  Kompatibel für alle AR-15/AR-10 Hersteller Er kann wahlweise für die beidseitige Nutzung für eine 90 oder 45 Grad Stellung verbaut werden, zusätzlich sind die unterschiedlichen Wahlhebel beidseitig austauschbar und ermöglichen somit eine individuelle Kofiguration für jeden Anwender. Nicht kompatibel zu HECKLER & KOCH MR308 und G28Z sowie zu HAENEL CR308 Modellen.  Made in Canada Designed to maximize performance with TriggerTech AR triggers our patented AR Safety features 45° and 90° interchangeable throws, our own proprietary ball tip detent pin and the grip does not have to be removed to install / remove the safety - making cleaning and trigger changes quick and easy! Intended Use 3 Gun,  close quarter engagement,  competition,  harsh environments operations,  high speed shooting,  home defense,  law enforcement,  military,  precision shooting,  target shooting. Safety Details Ambidextrous: Yes45° Throw: Yes90° Throw : YesInstall / Removal: Grip removal not required (patented)Levers: Short, Long, Cap - interchangeable Tumbler: DLC coated - smooth glide, crisp engagement Detent Pin: Proprietary ball tip detent is engineered to provide an unmatched feel when operating the safety Material Details Tumbler: 440C Stainless Steel & DLC Coated - Diamond-like Carbon Coating. This finish has unique properties of natural diamond - low friction, high hardness, and high corrosion resistance. Levers: 17-4 Stainless Steel. The Black version is coated with PVD - Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.   Detent: 440C Stainless Steel. Detent Ball Tip: Silicon Nitride  - ultra low friction and extremely durable to provide smooth surface that will never wear.  Full Description The AR Safety was developed to maximize the performance with TriggerTechs AR triggers and loaded with features. The patented design allows the safety to be installed and removed without removing the grip (after initial install). This is made possible by the tumbler and ball tipped detent pin. This feature saves time when changing triggers, cleaning or performing maintenance on your firearm. The detent has a silicon nitride ball tip which offers extremely low friction and durability, which gives an unmatched smooth feel when changing from safe to fire. The same material used on the bottom of space shuttles! The safety is ambidextrous with interchangeable short and long levers. A cap is provided to install on one side if the user wishes to only have a lever on one side. It can easily be setup as a 45 ° or 90 ° degree throw. The tumbler is made of 440C stainless steel and DLC coated for ultra performance and durability. The levers are constructed from 17-4 stainless steel and the black version is coated with PVD. This product is a must have for any competitive shooter looking to up their game!