GG&G Mossberg 930 Side Saddle 6-Shot Shell Holder
149,90 €
Produktinformationen "GG&G Mossberg 930 Side Saddle 6-Shot Shell Holder"
The GG&G unique design of the 930 Side Saddle Shell Holder (Six Shot ) provides quick access to your ammunition at an angle that matches your hand. The GG&G Mossberg 930 Side Saddle facilitates loading the mag tube and the chamber.
Important Consideration: Unlike other shotgun side saddle shell holders, the GG&G Side Saddle utilizes a solid rubber shell retainer versus a rubber tube shell retainer with side walls. The Reason? The rubber tube type shell retainer easily distorts from heat and continuous pressure of the shotgun shell. Over time the shell becomes loose in the shell holder. The GG&G solid shell retainer with a speced durometer reading, retains its form resulting in a tight fit that you can count on for years of use.
SPECS:
- As easy to install as changing a car tire.
- No modifications are required to the weapon for installation.
- The Mossberg Side Saddle mounts solidly to receiver using provided steel trigger pin replacement bolts.
- Non-marring backing plate will not damage the receiver's finish. The backing plate is cut out to view weapon's serial number. The 6 shot side saddle holds 12 ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.
- With the Mossberg 930 Side Saddle Shell Holder, shotshells can be retained in base up or base down position depending on shooter's style of reloading.
- The Mossberg Side Saddle features a durable, oil resistant, replaceable shotshell retention system.
- Manufactured from 6061 T-6 aluminum.
- Type III hard anodized black per mil-spec.
- Ergonomic design including lightning cuts for weight reduction.
- Weight: 5.5 oz
- Overall Length: 6.5"
- All edges have been rounded for the shooter's safety.
- Made In America By Men And Women Proud To Be Americans!
Zubehör
The unique design of the GG&G Mossberg 930 Flashlight Mount provides an easy way to mount a tactical flashlight on your Mossberg 930 12gauge shotgun. SPECS: Installs easily. Great for mounting a tactical flashlight to your Mossberg 930 shotgun. Ambidextrous Design. Can be mounted on either side of the Mossberg 930 to accommodate both right handed or left handed shooters. The MIL-STD-1913 accessory rail can be positioned facing forward or rearward. Manufactured from bullet proof ASTM A36 steel and 6061-T6 billet aluminum. Steel components are manganese phosphated in a non-reflective combat finish per Mil-Spec. Aluminum components are Type III hard coat anodized per Mil-Spec. All edges are smoothed and rounded for the shooter's safety. Accessory rail measures 1 3/4" long. Weight: 1.5 oz. Flashlight not included Made In America By Men And Women Proud To Be Americans!
This Sling and Light Mount Has the Looped Sling Attachment Separated From the Light Mount. The Sling Attachment Accepts HK Style Hooks and MASH Hooks. Mossberg 930 Looped Sling and Flashlight Mount Split Version (Fits 12ga Only): Our retail and LE customers requested that we design and manufacture a Mossberg 930 Looped Sling and Light Mount that was split. That is a light mount on one side, a sling attachment on the other side. We Did It! The design of the GG&G Mossberg 930 Looped Sling and Flashlight Mount Split Version provides an easy way to mount a tactical flashlight on the ejection port side of the Mossberg 930 so it does not interfere with the looped sling attachment on the non-ejection port side of your 930. If you are concerned about your flashlight and your sling getting in the way of each other during a tactical encounter, this is the Mossberg 930 Sling and Light Mount to purchase. Mossberg 930 Looped Sling and Flashlight Combo Mount Split Version Specifications: Easy to install.Designed, tested and manufactured to withstand the rigors of professional use.Perfect for mounting a tactical flashlight on your Mossberg 930 shotgun on the ejection port side.The looped sling attachment on the Mossberg Looped Sling and Flashlight Mount Split Version accepts HK style hooks and MASH hook sling attachments.All edges have been de-burred and and smoothed to protect the shooter.The Mossberg Flashlight Accessory Rail dovetail is manufactured per MIL-STD-1913.Length: The Accessory Rail measures 1.8" long.Materials: Manufactured from hard rock ASTM A36 steel and 6061-T6 billet aluminum.Finish: Steel components are manganese phosphated in a non-reflective combat finish per Mil-Spec.Finish: Aluminum components are Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.Weight: 1.5 oz.Made In America By Men And Women Proud To Be Americans!
A catastrophic malfunction that is potentially fatal could occur if there is a failure to retract the bolt handle completely in a stress fire situation. Don't risk it!!! Now you can replace the Mossberg 930 factory charging handle that not only is easily grabbed, but one that customizes your shotgun and looks great. The GG&G Mossberg Enhanced Tactical Charging Handle. SPECS: Easy to install. No modifications are needed to your shotgun. The Mossberg 930 Enhanced Tactical Charging Handle is much larger than the factory Mossberg 930 charging handle providing a more positive method of charging, especially in stress fire situations. Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations or when wearing gloves. Provides light weight, consistent reliable functioning. Rounded edges provide a snag free operation. All edges are deburred for the shooters safety. The Mossberg 930 Enhanced Tactical Charging Handle does not rotate. Material Body: Manufactured from ordnance steel. Body Finish: Manganese phosphate finished non-reflective matte black per mil-spec. Weight: Less than an ounce. Made In America By Men And Women Proud To Be Americans. MADE IN THE USA
A catastrophic malfunction that is potentially fatal could occur if there is a failure to retract the bolt handle completely in a stress fire situation. Don't risk it!!! Replace the Mossberg 930 factory charging handle with one that not only is easily grabbed in tactical encounters, but one that personalizes your shotgun; The GG&G Mossberg 930 Slotted Tactical Charging Handle. SPECS: Easy to install. No modifications are needed to your shotgun. The Mossberg 930 Slotted Charging Handle is much larger than the factory Mossberg 930 charging handle providing a more positive method of charging, especially in stress fire situations. Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations or when wearing gloves. Provides light weight, consistent reliable functioning. Rounded edges provide a snag free operation. All edges are deburred for the shooters safety. The Mossberg 930 Slotted Tactical Charging Handle does not rotate. Material: Manufactured from ordnance steel. Finish: Manganese phosphate finished non-reflective matte black per mil-spec. Weight: .6oz. Made In America By Men And Women Proud To Be Americans.
The GG&G one piece Mossberg 930 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Mossberg 930 shotgun. SPECS: Low profile design. MIL-STD-1913 configuration. Perfect for mounting a tactical scope to your Mossberg 930 shotgun. Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads. Attaches with four steel Torx head screws. Torx wrench is included. Precision machined from 6061-T6 billet aluminum. All edges are smoothed and rounded for the shooter's safety. Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec. Length: 5.9" long. Weight: 1.2 oz. Optic not included Made In America By Men And Women Proud To Be Americans!
Original spare part Compatibility: MOSSBERG 930MOSSBERG 940 JM ProMOSSBERG 940 Tactical MADE IN THE USA