GG&G Mossberg 940 PRO Tactical Replacement Accessory Capable Mag Tube Extension Nut
109,90 €
Produktinformationen "GG&G Mossberg 940 PRO Tactical Replacement Accessory Capable Mag Tube Extension Nut"
What the heck is the GG&G Mossberg 940 PRO Tactical Replacement Accessory Capable Extension Nut and why do I need it?
Here's what it is and why it is. Because of the Mossberg 940 PRO Tactical forearm design and the relationship between it and the magazine tube extension nut, the standard method of front accessory mounting is not possible with the factory set up.
GG&G and our customers appreciate the Mossberg 940 PRO shotgun and its features. However, it appears that Mossberg thought about the problem and offered an easy but incomplete and questionable solution.......A Plastic Barrel Clamp that accommodates M-LOK accessories. Our team of professional experienced shooters and advisers see at least two problems. One is the Plastic Barrel Clamp, it may not fail right away, but after multiple heat cycles and attempting to keep it tight on the barrel it will, in our humble opinion, lead to a failure. Number two is the M-LOK slot position being at the top of the barrel clamp. There is a reason that the majority of barrel clamp manufacturers, including GG&G, mount the sling or light mounts, whether they be an M-LOK configuration, or a more traditional screw attachment method, at the most stable position and most ergonomic position, the center point of the barrel clamp. As you pull on the sling, you are pulling the top non-anchored area away from the barrel. Occasionally it's a hot barrel - a very hot barrel, which tends to make plastic, even thermoplastics, more flexible and subject to degradation, bending and movement.
The GG&G Team came up with a very unique solution that works with multiple different accessories. Yes, you need the GG&G Replacement Accessory Capable Mag Tube Extension Nut in order to mount the front accessories. Yea, it is not an inexpensive solution, but it is manufactured from steel! Solid, Rugged And Dependable!
COMPATIBILITY NOTICE: DOES NOT WORK ON THE NEW 2025 MOSSBERG 940 PRO TACTICAL SPX MODEL!
Specifications:
- Manufactured Specifically For The Mossberg 940 PRO Tactical 12ga Shotgun.
- Easy to install. No modifications are needed to your 940 PRO Tactical shotgun, except for easy removal of a component to be replaced by this one.
- The kit includes an installation wrench.
- The Mossberg 940 Tactical Replacement Accessory Capable Extension Nut gives the 940 shooter more tactical accessory options.
- Provides a method to mount tactical light and laser accessories closer to the shooter's hand for a more natural operation.
- Rounded edges provide a snag free operation.
- All edges are deburred for the shooter's safety.
- Nut Material: 1018 steel.
- Finish: Manganese phosphate finished non-reflective matte black per mil-spec.
- Weight: 3.2 oz.
- Made In America By Men And Women Proud To Be Americans.
Zubehör
Bigger is not always better, but it is when a catastrophic malfunction, a potentially fatal one, could occur if there is a failure to retract the bolt handle completely in a stress fire situation. Yea, it's knurled, but with no disrespect to Mossberg, but it's sized to fit a ten year old boy or girls hand. You need to be able to just Grab It - Retain It - Own It - Don't Risk It!!! Replace the Mossberg 940 PRO factory charging handle with one that not only is easily grabbed in tactical encounters, but one that personalizes your shotgun; The GG&G Mossberg 940 PRO Slotted Tactical Charging Handle. Mossberg 940 PRO Tactical Slotted Charging Handle Specifications: Easy to install. No modifications are needed to your 940 PRO 12ga shotgun.The Mossberg 940 PRO Slotted Charging Handle is much larger than the factory Mossberg 940 charging handle providing a more positive method of charging, especially in stress fire situations.Will also fit the Mossberg 940 Pro Tactical SPX Model.Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations, in wet conditions or when wearing gloves.Provides light weight, consistent reliable functioning.The GG&G Slotted Charging Handle provide's a customized look to your 940.Rounded edges provide a snag free operation.All edges are deburred for the shooter's safety.The Mossberg 940 PRO Slotted Tactical Charging Handle does not rotate.Material: Manufactured from ordnance steel.Finish: Manganese phosphate finished non-reflective matte black per mil-spec.Weight: Less than an once.Made In America By Men And Women Proud To Be Americans.
Besides the solid fit of the Mossberg 940 Six Shot Side Saddle, The 15 Degree Shot Shell Angle Facilitates Quick Tactical Loading Remember, "When you are out of ammo-You could be out of time!" When you need additional rounds, The life saving value of having that additional ammo at your finger tips, will far exceed the cost! The GG&G Mossberg 940 PRO Side Saddle Shell Holder (Six Shot ) provides quick access to your ammunition at an angle that matches most shooters hands. The GG&G Mossberg 940 Side Saddle's distinctive design facilitates loading the mag tube and the chamber. Important Consideration: While other side saddle manufacturers use a hollow rubber tube shell retainer with side walls that easily distort from heat and continuous pressure of the shotgun shell, resulting in the shot shell becoming loose in the shell holder, GG&G uses a solid rubber shell retainer with a speced durometer reading. The solid rubber component retains its form resulting in a tight fit that you can count on for years of use. Mossberg 940 PRO Tactical Side Saddle Shell Holder Specifications: As easy to install as changing a car tire.No modifications are required to the shotgun for installation.Will also fit the Mossberg 940 Pro Tactical SPX Model.The Mossberg 940 Side Saddle mounts solidly to the receiver using the provided steel trigger pin replacement bolts.Non-marring backing plate will not damage the receiver's finish. The backing plate is cut out to view weapon's serial number. The 6 shot side saddle holds 12ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.With the Mossberg 940 PRO Tactical Side Saddle Shell Holder, shotshells can be retained in base up or base down position depending on shooter's style of reloading.The Mossberg 940 Side Saddle features a durable, oil resistant, replaceable shotshell retention system.All edges have been rounded for the shooter's safety.Material: Manufactured from 6061 T-6 aluminum.Finish: Type III hard anodized black per mil-spec.Ergonomic design including lightning cuts for weight reduction.Weight: 5 oz. Overall Length: 6". Ammo not included Made In America By Men And Women Proud To Be Americans!
Yes, the factory charging handle is knurled, but with no disrespect to Mossberg, it's sized to fit a ten year old boy or girls hand. Bigger is not always better, but it is when a catastrophic malfunction, a potentially fatal one, could occur if there is a failure to retract the bolt handle completely in a stress fire situation. You Need To Be Able To Grab It - Retain It - Own It - And Not Risk It!!! Replace the Mossberg 940 PRO factory charging handle with one that is easily grabbed in tactical encounters. The GG&G Mossberg 940 PRO Enhanced Charging Handle - Rock Solid! Mossberg 940 PRO Tactical Enhanced Charging Handle Specifications: Easy to install. No modifications are needed to your shotgun.The Mossberg 940 PRO Tactical Enhanced Charging Handle is much larger than the factory Mossberg 940 PRO Charging Handle providing a more positive method of charging, especially in stress fire situations.Will also fit the Mossberg 940 Pro Tactical SPX Model.Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations, when wet, or when wearing gloves.Provides light weight, consistent reliable functioning.Rounded edges provide a snag free operation.All edges are deburred for the shooter's safety.The GG&G Mossberg 940 PRO Enhanced Charging Handle does not rotate.Material Manufactured from ordnance steel.Finish: Manganese phosphate finished non-reflective matte black per mil-spec.Weight: Less than an ounce.Made In America By Men And Women Proud To Be Americans.
Here's what it is and why it is. Mossberg 940 PRO QD Rear Sling Attachment: Will also fit the Mossberg 940 Pro Tactical SPX Model.Compact and easy to install.Ambidextrous.Can be used with a two point sling set up or as a single point sling attachment.Provides a QD rear side sling mount for the Mossberg 940 shotgun.With just a push of the QD button, unsling your Mossberg 940 for tactical flexibility.Available with or without the GG&G Enhanced Heavy Duty QD Rectangular Or Angular Sling Swivels.The HD QD Sling Swivel accommodates up to 1 1/4" web slings.The Heavy Duty QD Angular Swivel is great for mash hooks or HK style quick clips.The Mossberg 940 PRO Rear Sling Attachment includes the Limited Rotation Sling Swivel feature to help eliminate sling wrap up.All edges have been dehorned for shooters safety.Material: Manufactured from solid billet 6061 T-6 aluminum.Finish: Bead blasted and Type III hard anodized in a non-reflective matte black finish per mil-spec.Weight: 1.7 oz with a HD QD Sling Swivel installed.Made in America By Men And Women Proud To Be Americans! Informations: QD Sling Swivel not includedCompatibel accessories, see under this article, accessories
The GG&G one piece Mossberg 940 PRO Scope Mount is an easy but super solid scope mount for your tactical scope. It mounts directly to the factory drilled and tapped receiver of your Mossberg 940 PRO shotgun. Low profile, CNC machined Mil-Std 1913 dovetail, manufactured from billet 6061T6 aluminum, Mil-Spec anodizing, Torx head mounting screws, and MADE IN AMERICA BY MEN AND WOMEN PROUD TO BE AMERICANS! Great Rugged Stuff! Specifications: Low profile design.MIL-STD-1913 configuration.Perfect for mounting a tactical scope to your Mossberg 940 PRO shotgun.Easy installation to factory drilled and tapped receivers.Attaches with four steel Torx head screws. Torx wrench is included.Precision CNC machined from 6061-T6 billet aluminum.All edges are smoothed and rounded for the shooter's safety.Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.Length: 5.25" long.Weight: 1.5 oz.Made In America By Men And Women Proud To Be Americans! Informations: Compatibel accessories see under this article, accessories
Enhance Your Mossberg 940 JM PRO With American Made GG&G Accessories! This GG&G Low Profile Red Dot Mount For the RMR was Designed, Manufactured and Tested 12ga Shotguns. This Scope Base Fits The RMR And Approximately 20 Other Red Dot Optics With A Similar Footprint. Be Advised! Attachment Screw Lengths Vary. Longer screws may damage the top of your shotgun! IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Mossberg 940 Pro Tactical RMR Red Dot Scope Mount. A fitment list is provided in the Specification section below. NOTE: Please be advised that the screws that are included with the GG&G Red Dot Mount are specific to mounting the RMR and may be too long for mounting other red dot optics. For example three Holosun Mini Red Dot Scopes, models 407, 507 and 508 have the same attachment screw layout as the Trijicon RMR. However, BE ADVISED: The screws that come with the GG&G Mossberg 940 Pro Tactical RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver! NOTE: Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR! PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR. Mossberg 940 PRO Tactical Red Dot Scope Mount For RMR: Red Dot Optics like the Trijicon RMR are a great addition to the Mossberg PRO Tactical Shotgun. The GG&G Mossberg 940 Pro Low Profile Red Dot Optic Mount has the RMR fitment or attachment layout. Besides the Trijicon RMR, the 940 Pro Red Dot Scope Base fits approximately 20 other red dot optics, but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic. The Mossberg 940 Pro Tactical Red Dot RMR Mount is a solid low profile mount. Accurately CNC machined to precise tolerances. The RMR Mount has a rock solid engagement with the top of the 940 Pro receiver and the red dot optic. The Red Dot Scope Mount for the 940 Pro Tactical mated with the RMR Red Dot Scope, provides an accurate quick target acquisition package. Mossberg 940 PRO Tactical Red Dot Scope Mount Specifications: Does not require any modifications to your Mossberg 940 Pro except the possible removal of the standard dovetail scope mount. The Mossberg 940 Red Dot Scope Mount For The RMR is easy to install using factory drilled and tapped mounting holes. Will also fit the Mossberg 940 Pro Tactical SPX Model. Includes mounting hardware for the 940 Pro Tactical Scope Mount and hardware specifically for mounting the Trijicon RMR to the scope mount. Hex key wrenches are included.All edges are deburred for the shooter's safety. Rounded edges provide a snag free operation. Material: The Mossberg 940 Pro RMR Red Dot Scope Mount is manufactured from 6061-T6 aluminum. Length: 1.800" Width: 1.100" Thickness: .210" Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements. Weight: 0.5 oz. Made in America By Men And Women Proud To Be Americans! Compatible Red Dots see under this article, accessories Compatibility: The Mossberg Red Dot Scope base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic. Mossberg 940 Pro Tactical Low Profile Red Dot Mount Fitment List: ZEROTECH Thrive HD / Trijicon RMR / Trijicon SRO / Holosun 407C / Holosun 407C V2 / Holosun 407C X2 / Holosun 507C / Holosun 507C V2 / Holosun 507C X2 / Holosun 508T / Holosun 508T X2 /Riton X3 Tactix PRD/ NcStar VISM FlipDot Pro / ADE Advanced Optics RD3-020 Raptor / ADE Advanced Optics RD3-023 Valkyrie / Swampox Kingslayer 1x22 / Swampfox Liberty RMR 1x22 / Swampfox Justice RMR 1x27 / Vector Optics Frenzy 1x22x26.