JP ENTERPRISES AR-15 Custom Tuned & Polished Buffer Spring - Carbine Length

  High-quality AR-15/M16 Standard Buffer, Carbine length. Compatible with all AR-15 MIL-SPEC and COM-SPEC Carbine length buffer tubes. Weight: 2.93 oz / 83,06g

  The H Buffer is a heavy buffer designed to reduce felt recoil as well as reduce the cycling rate on full-auto rifles. It is designed to mil-spec standards for use in AR15 carbines with a collapsible buttstock. Weight: 4.0oz. Please use caution when adding a heavy buffer to your rifle build as too heavy of a buffer can prevent reliable function. Platform AR15 Weight(s) 4.0 oz Other Features Buffer Length: 3.25”   MADE IN THE USA

  MOD1- T0, Intermediate Length (BUFFER ONLY) (weight = approximately 3.8oz) Compatible accessories, see under this article, accessories. Lessens felt recoil, without compromising reliability Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system Increased internal counterweight travel reduces bolt bounce Uses a M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components BCM US Patent #10415907 IMPORTANT NOTE: MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extensions (BCM part #BCM-MK2RMS-M1T0 / BCM-MK2RMS-M1T1 / BCM-MK2RMS-M1T2) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.   MADE IN THE USA

  MOD1- T2, Intermediate Length (BUFFER ONLY) (weight = approximately 5.6oz) Compatible accessories, see under this article, accessories. Lessens felt recoil, without compromising reliability Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system Increased internal counterweight travel reduces bolt bounce Uses a M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components BCM US Patent #10415907 IMPORTANT NOTE: MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extensions (BCM part #BCM-MK2RMS-M1T0 / BCM-MK2RMS-M1T1 / BCM-MK2RMS-M1T2) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.   MADE IN THE USA

  MOD1- T4, Intermediate Length (BUFFER ONLY) (weight = approximately 7.4oz) Compatible accessories, see under this article, accessories. Lessens felt recoil, without compromising reliability Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system Increased internal counterweight travel reduces bolt bounce Uses a M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components BCM US Patent #10415907 IMPORTANT NOTE: MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extensions (BCM part #BCM-MK2RMS-M1T0 / BCM-MK2RMS-M1T1 / BCM-MK2RMS-M1T2) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.   MADE IN THE USA

  The Strike Industries AR Mil-Spec Buffer Housing gives the user a cost-effective means of customization while retaining functionality. The AR-15 buffer is often an overlooked part of the gas system that is needed to properly fine-tune your specific setup. This buffer housing is machined from 6061-T6 aluminum and designed to fit Mil-Spec standard or carbine length receiver extensions/buffer tubes while also providing a level of customization. The SI AR Mil-Spec Buffer Housing is shipped without weights so that you can either replace your current housing, use existing weights or opt to purchase weights to refine the weapons gas system to your specific needs. The NBR rubber material buffer pad helps absorb impact and is secured by the included roll pin. By modulating the weight through the combination of tungsten, steel and aluminum weights, the user is given a cost-effective means of adjusting the weapons reciprocating mass, and thus the recoil experienced by the shooter with the Strike Industries AR Mil-Spec Buffer Housing. COMPATIBILITY:-14mm (0.55") diameter Mil-Spec buffer weights and spacers (maximum of 14.20mm)-Mil-Spec standard and carbine length receiver extensions/buffers NOTE:-Buffer housing only, no weights or spacers included-Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary -LENGTH: 83.15 (with buffer pad)-WIDTH: 25.25mm (curve to curve)-HEIGHT: 24mm (flat to curved)-WEIGHT: 1.0 oz-WEIGHT W/ PKG: 1.2 ozMONTAGEVIDEOMADE IN THE USA

  Developed to suit the needs of a performance-based shooter, the Strike Industries Optimus Weight Buffer provides rapid modular customization that can be performed by the user. Changing out the buffer is one of the most direct upgrades to the AR platform, the Optimus WB comes with standard H1-H3 weight distribution, or it can be adjusted to the specific weight needs of the shooter. The Optimus WB will increase the reliability, accuracy, and performance of the AR shooting platform. Product Features: - Rapid take down and configuration- Durable 7075 aluminum construction- O-ring to keep the buffer head from walking out- Standard/ H1/ H2/ H3 weight configuration or user needs- Optimal size and weight for increased reliability, accuracy and performance for AR-15 platform.- Numerous weight configuration for more accurate setting (used for multiple calibers, gas system, suppressed, rapid fire, and etc)  Package Includes:-x1 Buffer Head (Impact side) 7075 Aluminum-x1 Buffer Main Body 7075 Aluminum with TPU End Cap-x2 Tungsten Weights  -x2 S45 Steel Weights -x2 6061 Aluminum Weights-x3 POM Weights -S45 Steel Roll Pin-x6 Rubber Spacer -x1 O-Ring  Follow the chart to customize your buffer to your preferred weight.MADE IN THE USA

  High quality Mil-Spec Buffer Tube, Carbine Length for AR-15 / AR-10 models, compatible with all Mil-Spec AR-Stocks. Made from High-Strength 7075-T6 Aluminum with excellent smooth Finish! NOT compatible with Com-Spec AR-Stocks. Specs: Mil-Spec Diameter Made from High-Strength 7075-T6 Aluminum 6 Positions Carbine Length Finish: Mil-Spec Type III Hard Anodized Black Informations: Compatible with all Carbine Length Springs Compatible with all Carbine Length Buffers Compatible with all Mil-Spec AR-Stocks NOT compatible with Com-Spec AR-Stocks Required Castle nuts, springs, buffers and special tools see under this article, accessories

  High-quality AR-15/M16 buffer, carbine length, compatible with all AR-15 MIL-SPEC and COM-SPEC buffer tubes, Standard weight 3.0 oz. The Standard weight AR-15 buffer provides reliable function with Carbine and Rifle length gas system rifles. The Standard buffer contains 3 steel slugs in the buffer for a total weight of 3.0 oz or .20 lbs. For applications with mid-length or short gas systems see our H1, H2 or H3 buffers.   What’s in a name? The Luth name is synonymous with Experience, Expertise, Knowledge, Innovation, and has been a driving force in the firearm industry for close to 40 years. Starting as a machinist 40 years ago Randy Luth founded D.P.M.S. / Panther Arms and grew the company to become one of the leading manufacturers of AR-15 firearms and firearm components in the world. MADE IN THE USA

  The perfect Universal Armorer tool for holding barrels. The Vice Jaws uses 2 “V” blocks that clamp into your bench vise to simplify assembly work. Details: Will work with standard barrels as well as 1″ bull barrels and 3/4″ heavy barrels Solid high strength 6005 A-T61 aluminum for extreme durability Length: 4″ / 102mm Weight: 1003g No anodize MADE IN THE USA

  Shaped like the AR that it is designed to work on, the AR Flat Wrench from Luth-AR, is a versatile and indispensable companion for every firearm enthusiast. This budget-minded multi-use armorer’s tool combines durability, functionality, and ease of use to deliver unparalleled performance. This wrench effortlessly handles a wide range of tasks, including barrel nut installation and removal, castle nut tightening, flash hider installation, and more. Uses: A2 Butt Stock Screwdriver Bottle Opener Luth-AR Palm Guard Barrel Nut Wrench A2 Buffer Tube Wrench 1/2″ Drive Torque A2 Flash Hider Wrench Hammer Castle Nut/Lock Ring Wrench Did we mention Bottle Opener? Specifications: Made from A36 1/4″ Plate Steel Manganese Phosphate Finish Length: 15.1875″ / 385mm Weight: 1.29 lbs / 802g Width: 3.625″ Thickness: 0.257″ MADE IN THE USA

  Crafted with meticulous attention to detail, the AR Armorer Wrench, from Luth-AR, is a versatile and indispensable companion for every firearm enthusiast. It combines durability, functionality, and ease of use to deliver unparalleled performance. This wrench effortlessly handles a wide range of tasks, including barrel nut installation and removal, castle nut tightening, flash hider installation, and more. Uses: A2 Buttstock Screwdriver A2 Flash Hider Wrench A2 Buffer Tube Wrench Standard Mil-Spec AR15 Barrel Nut Wrench Free Float Handguard Wrench (also can be used for looser tolerance barrel nuts) Luth-AR Palm Guard Barrel Nut Wrench Hammer 3/8″ Drive Torque Castle Nut/Lock Ring Wrench Bottle Opener Specifications: 8620 Steel Nitride Finish Length: 11.75″ / 295mm Width: 2.625″ Thickness: 0.875″ Weight: 1.29 lbs / 623g MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The Luth-AR Assembled Slick-side A1 Upper Receiver is made from 7075-T6 aluminum forgings machined to final dimensions. Correct early-style carry handle contours with A1-pattern rear sight housing, perfect for building a retro M16A1 Model. The assembled version of the Slick Side A1 includes the A1 Rear Sight and Ejection Port Cover Door Assemblies installed.The Slick Side A1 Upper eliminates the shell deflector and forward assist. Charging handle components sold separately. All points where other parts attach are finished current mil-spec dimensions. Current production AR-15 components will fit perfectly. Note that the AR-15 / M16 Slick-side Upper Receiver is period-accurate therefore it DOES NOT have M4-type feed ramps found on most current-production AR-15 flattop upper receivers. Upper Specs: 7075-T6 Aluminum Forging Hard Coat Anodize Black Does NOT have M4 Feed Ramp No Shell Deflector No Forward Assist A1 Rear Sight Assembly Installed Ejection Port Cover Door Assembly Installed Counterbored for the Detent  Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Start your project with our complete A1 upper receiver anodized. Comes with the standard features of a Mil-Spec upper receiver and is forged from 7075-T6 aluminum with a black hard coat anodized, tough finish.  The A1 carry handle includes A1 adjustable rear sight, and perfect for building a retro M16A1E1, XM16E1, Carbine Model 723, or a Model 733 Commando. The upper has a shell deflector and tear drop forward assist and dust cover. The C7 style carry handle allows mounting a scope from the era for a retro look. This upper does have M4 feed ramps. Use with any Mil-Spec lower receiver. Upper Specs: 7075-T6 Aluminum Forging Hard Coat Anodize Black M4 Feed Ramps Shell Deflector Teardrop Forward Assist A1 Rear Sight Assembly Installed Ejection Port Cover Door Assembly Installed Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Start your project with our complete A2 upper receiver anodized. Comes with A2 carry handle style, complete with cuts for mounting A2 rear sight (windage and elevation). Features shell deflector, forward assist housing, and provisions for installing an ejection port cover. Precision machined from a premium-grade 7075 T6 aluminum forging and hardcoat anodized for extra strength, with a tough, scratch-resistant Teflon coating. Does Not feature M4 Style Cuts. Complete with Dust Cover, Round Forward Assist and A2 Rear Sight Kit installed! Perfect for building a retro M16A2 Model. Upper Specs: 7075-T6 Aluminum Forging Hard Coat Anodize Black, scratch-resistant Teflon coating Does NOT have M4 Feed Ramp Shell Deflector Round Forward Assist A2 Rear Sight Assembly Installed Ejection Port Cover Door Assembly Installed Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  The Luth-AR .223/5.56 A3 Flattop Upper Receiver comes fully assembled with an M4-type feed ramp, 12 position Picatinny accessory rail, for mounting scopes or flip-up sights. Includes a charging handle, shell deflector, forward assist, and ejection port cover. Precision machined from a 7075-T6 aluminum forging and hardcoat anodized for a tough, scratch-resistant coating. Upper Specs: 7075-T6 Aluminum Forging Hard Coat Anodize Black, scratch-resistant Teflon coating M4 Feed Ramp Shell Deflector Round Forward Assist Charging handle Ejection Port Cover Door Assembly Installed Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  The Luth-AR Lo-Drag upper receiver is made from 6061-T6 Aluminum. Hard coat Anodized Black. Designed to be lightweight, without a forward assist, shell deflector or dust cover. Thick wall for strength and a Picatinny top rail. Upper Specs: 6061-T6 Aluminum Forging Hard Coat Anodize Black Picatinny top rail M4 Feed Ramp No Shell Deflector No Forward Assist No Ejection Port Cover Door Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Our A1 Retro Reproduction Handguard is a tribute to the original Vietnam-era A1 design, meticulously recreated down to the smallest detail. We’ve honored the original look and feel using Original Turn Rivets installed by hand to secure the aluminum heat shields to the interior of the A1 triangular Handguards, just as they were originally installed over 60 years ago. We’ve taken a modern approach where it counts. These handguards are crafted from 35% glass-filled high-performance nylon, offering superior strength, heat resistance, and durability—without compromising the classic aesthetics. Whether you’re restoring a retro rifle or just appreciate timeless military style, these handguards are built to perform and made to last. Its durable design ensures it can withstand the toughest shooting conditions. Upgrade your setup with the A1 Handguard today. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A1 Triangular Handguard - Rifle Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Triangular Handguard Caps Compatible only to A1 Slip Rings Compatible only to Rifle Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Our A1 Retro Reproduction Handguard is a tribute to the original Vietnam-era A1 design, meticulously recreated down to the smallest detail. We’ve honored the original look and feel using Original Turn Rivets installed by hand to secure the aluminum heat shields to the interior of the A1 triangular Handguards, just as they were originally installed over 60 years ago. We’ve taken a modern approach where it counts. These handguards are crafted from 35% glass-filled high-performance nylon, offering superior strength, heat resistance, and durability—without compromising the classic aesthetics. Whether you’re restoring a retro rifle or just appreciate timeless military style, these handguards are built to perform and made to last. Its durable design ensures it can withstand the toughest shooting conditions. Upgrade your setup with the A1 Handguard today. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A1 Triangular Handguard - Rifle Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Triangular Handguard Caps Compatible only to A1 Slip Rings Compatible only to Rifle Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Enhanced control and accuracy with the A1 Triangular Handguard (XM-177). Made from high-quality materials, this durable handguard provides a comfortable and secure grip for your firearm. Its unique triangular shape offers a unique look and improved handling. Upgrade your AR with the A1 Triangular Handguard. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A1 Triangular Handguard - Carbine Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Triangular Handguard Caps Compatible only to A1 Slip Rings Compatible only to Carbine Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Enhanced control and accuracy with the A1 Triangular Handguard (XM-177). Made from high-quality materials, this durable handguard provides a comfortable and secure grip for your firearm. Its unique triangular shape offers a unique look and improved handling. Upgrade your AR with the A1 Triangular Handguard. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A1 Triangular Handguard - Carbine Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Triangular Handguard Caps Compatible only to A1 Slip Rings Compatible only to Carbine Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Specs: Based off the original AR-15 Retro 601 charging handle. 6061-T6 Aluminum Forging Hard Coat Anodize Black Informations:  Compatible only to A1 Upper Receiver Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The Triangular Handguard Cap is an authentic replacement part. Specs: For Barrels with .750″ Gas Ports Informations:  Compatible only to Triangular AR-15 handguards Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The A1 Compensator, 3 Prong is a performance-enhancing accessory for your firearm that serves as a flash hider/compensator, designed to reduce recoil and muzzle rise for improved control and accuracy. It is made of high-quality steel and is compatible with A1-style rifle barrels. Specs: Made from 4140 Chrome Moly steel Finish: Manganese Phosphate Thread Pitch: 1/2-28 UNEF OAL: 1.75″ Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The Vietnam War era’s distinctive “Duck Bill” flash suppressor was an iconic firearm accessory. Designed for the Colt Commando and CAR-15 rifles, its unique shape earned it the nickname due to its resemblance to a duck’s bill. Introduced in the 1960s, the suppressor served to reduce muzzle flash, improving the shooter’s visibility in low-light conditions. Its historical significance lies in its association with the compact and specialized firearms used by American forces during the Vietnam War. Also used to complete your 601 build! Specs: Made from 4140 Chrome Moly steel Finish: Manganese Phosphate Thread Pitch: 1/2-28 UNEF Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Upgrade your rifle with the A1 Birdcage Compensator/Flash Hider for optimal shooting performance. Precision-engineered for .223/5.56mm rifles, this muzzle device minimizes muzzle rise, reduces flash signature, and ensures rapid target acquisition. Crafted with high-quality materials, it guarantees durability and reliability in the field. Specs: Made from 4140 Chrome Moly steel Finish: Manganese Phosphate Thread Pitch: 1/2-28 UNEF Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The A1 Lock Washer for 3 Prong A1 Flash Hider is an authentic replacement part. Its historical significance lies in its association with the compact and specialized firearms used by the American armed forces during the Vietnam War. Specs: For Thread Pitch: 1/2-28 Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The Triangular Handguard Cap is an authentic replacement part. Specs: For Barrels with .625″ Gas Ports Informations:  Compatible only to Triangular AR-15 handguards Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The LUTH A1 Retro Slip Delta Ring Pack is an authentic quality replacement parts kit. Specs:  Included Barrel Snap Ring BL-07 Included .223/5.56 Barrel Weld Spring BL-08 Included A1 Slip Ring - Color Black BL-09A Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The LUTH A1 Retro Slip Delta Ring Pack is an authentic quality replacement parts kit. Specs:  Included Barrel Snap Ring BL-07 Included .223/5.56 Barrel Weld Spring BL-08 Included A1 Slip Ring - Color Gray BL-09A Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Maintain the smooth operation of your AR-15 with our complete teardrop forward assembly. This high-quality set includes all the components you need to properly install your forward assist, including the teardrop forward assist, assist spring, and assist pin. Whether you’re replacing a worn-out assembly or building a rifle from scratch, this is the perfect choice.  Specs: Includes Teardrop Forward assist assembly Includes Forward assist spring Includes Forward assist pin Informations:  Compatible to AR-15 Mil-Spec Upper Receiver Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Specs: Thread: 1/4-28 x 1/2 Informations:  Compatible to A1 ButtstocksCompatible to A1 Buttstocks in conjunction with an AR-15 Rifle Buffer Tube Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Our A1 Pistol Grip  is a tribute to the original Vietnam-era A1 design, meticulously recreated down to the smallest detail.  We’ve taken a modern approach where it counts. These Pistol Grips are crafted from Dupont Zytel 30% glass filled nylon, designed for durability and authenticity, this grip combines classic aesthetics with modern materials, ensuring a comfortable and reliable shooting experience. A1 Pistol Grip  Material: Dupont Zytel 30% glass filled premium nylon Informations:  Compatible to AR-15 Mil-Spec Lower Pistol grip screw or washer NOT included Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Our A1 Pistol Grip  is a tribute to the original Vietnam-era A1 design, meticulously recreated down to the smallest detail.  We’ve taken a modern approach where it counts. These Pistol Grips are crafted from Dupont Zytel 30% glass filled nylon, designed for durability and authenticity, this grip combines classic aesthetics with modern materials, ensuring a comfortable and reliable shooting experience. A1 Pistol Grip  Material: Dupont Zytel 30% glass filled premium nylon Informations:  Compatible to AR-15 Mil-Spec Lower Pistol grip screw or washer NOT included Compatible accessories see under this article, accessories MADE IN THE USA

  A2 Pistol Grip – the perfect upgrade to your rifle that provides improved comfort, control, and accuracy. Our A2 pistol grip is crafted from high-quality materials to ensure maximum durability, and is designed to fit perfectly onto your rifle, offering a comfortable and ergonomic grip for any shooting scenario. Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement. This makes it perfect for long-range shooting, target practice, hunting, or any other shooting activity that requires precision and control. Easy to install and is compatible with a wide range of rifles. Its sleek and simple design makes it an ideal replacement for any standard pistol grip, and the added features provide better handling and control. If you’re looking to improve the comfort and accuracy of your rifle, look no further than the Luth-ar A2 Pistol Grip. Order yours today and experience the difference that a high-quality pistol grip can make to your shooting experience. A2 Pistol Grip  Material: Dupont Zytel 30% glass filled premium nylon Informations:  Compatible to AR-15 Mil-Spec Lower Pistol grip screw or washer NOT included Compatible accessories see under this article, accessories MADE IN THE USA

  A2 Handguard for your Mil-Spec M16 Retro Build Get that clamshell hand guard look for your retro military-style build. Hand guards come with the aluminum heat shields you need to stay cool. The A2 Handguard is a must-have accessory for any firearm enthusiast. With its durable construction and comfortable grip, this hand guard provides improved accuracy and control on the range. Its design ensures minimal added weight to your setup. Elevate your shooting experience with the A2 Handguard. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A2 Handguard - Carbine Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Round Handguard Caps Compatible only to A2 Slip Rings Compatible only to Carbine Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  A2 Handguard for your Mil-Spec M16 Retro Build Get that clamshell hand guard look for your retro military-style build. Hand guards come with the aluminum heat shields you need to stay cool. The A2 Handguard is a must-have accessory for any firearm enthusiast. With its durable construction and comfortable grip, this hand guard provides improved accuracy and control on the range. Its design ensures minimal added weight to your setup. Elevate your shooting experience with the A2 Handguard. Each of the handguard halves are lined with aluminum heat shields, to help protect you and the handguards themselves from the barrel heat. Handguard Specs: A2 Handguard - Carbine Length Material: Dupont Zytel 35% glass filled premium nylon Included Aluminum Heat Shields Informations:  Compatible only to Round Handguard Caps Compatible only to A2 Slip Rings Compatible only to Carbine Length Gas Systems Compatible accessories see under this article, accessories MADE IN THE USA

  Introducing our cutting-edge 5.5″ Flash Hider for AR-15 enthusiasts seeking unparalleled performance. Crafted with precision and designed for the discerning shooter, this flash hider is the ultimate solution for mitigating muzzle flash and recoil. Measuring 5.5 inches in length, it seamlessly threads onto your AR-15, providing superior flash suppression. Our advanced engineering ensures minimal gas dispersion, maintaining exceptional accuracy shot after shot. Constructed from high-quality 4150 steel with a manganese phosphate finish, it guarantees durability in even the most demanding conditions. Its sleek design not only enhances the aesthetics of your rifle but also complements its functionality. Upgrade your AR-15 with the 5.5″ Flash Hider today and experience improved shooting accuracy and reduced muzzle flash. Dominate the range with confidence. Specs: Length: 5.5″ / 141mm Width: .877″ Made from 4150 Chrome Moly steel Finish: Manganese Phosphate Thread Pitch: 1/2-28 UNEF Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The A2 Peel Washer for A2 Flash Hider is an authentic replacement part. Its historical significance lies in its association with the compact and specialized firearms used by the American armed forces. Specs: For Thread Pitch: 1/2-28 Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  The LUTH-AR Bolt Catch is a high-quality accessory for your AR-style rifle. This bolt catch is designed to securely hold the bolt carrier group open, providing improved reliability and function. Its durable construction ensures it can withstand the toughest shooting conditions. Upgrade your rifle with the LUTH-AR Bolt Catch.  Specs: Compatible with AR-15 MIL-SPEC Lower Receiver Material: Steel Finish: Phosphated Compatible accessories see under this article, accessories MADE IN THE USA

  The LUTH-AR Bolt Catch Roll Pin is an essential replacement part for your AR-style rifle. This roll pin securely holds the bolt catch in place, ensuring proper function and reliability. Its durable construction ensures it can withstand the toughest shooting conditions. Keep your rifle in top condition with the AR Bolt Catch Roll Pin. Specs: Compatible with AR-15 MIL-SPEC Lower Receiver Dimensions: 3/32" x 1/2" (≈ 2,38mm x 12,7mm) Compatible accessories see under this article, accessories MADE IN THE USA

  The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 Carbine Buttstock is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of-Pull adjustment as well as height and lateral adjustments, and an adjustable cheek rise in a low-cost, lightweight, strong and high-quality design. The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies. The MBA-3 also features an anti-rattle set screw. The modular design of the MBA Buttstock allows you to configure your buttstock to your specific and personal needs. Includes a rail attachment for attaching a monopod. The MBA features multiple attachment points for a sling, including molded pockets that will accept Grovtec QD cups, sold separately. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes  Compatible accessories see under this article, accessories Features: Ergonomic Design Adapts To Existing Commercial and Mil-Spec Buffer Tubes Fully adjustable Quick adjust knobs 3-Axis butt plate Integrated bag hook MBA Ergonomic Styling Lever for Rapid Positioning Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides, solds separately High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-3 Application: Carbine Length For caliber: .223, .308 Buttstock Weight: 19.2 oz Extended Length of Pull: 15 5/8" Collapsed Length of Pull: 11 11/16" Overall Extended Length: 8 3/4" Overall Collapsed Length: 7 11/16" Cheek Rise : 1" Fully Extended Additional Length-of-Pull: 1 1/16″ MADE IN THE USA

  The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 Carbine Buttstock is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of-Pull adjustment as well as height and lateral adjustments, and an adjustable cheek rise in a low-cost, lightweight, strong and high-quality design. The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies. The MBA-3 also features an anti-rattle set screw. The modular design of the MBA Buttstock allows you to configure your buttstock to your specific and personal needs. Includes a rail attachment for attaching a monopod. The MBA features multiple attachment points for a sling, including molded pockets that will accept Grovtec QD cups, sold separately. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes  Ergonomic Design Compatible accessories see under this article, accessories Features: Ergonomic Design Adapts To Existing Commercial and Mil-Spec Buffer Tubes Fully adjustable Quick adjust knobs 3-Axis butt plate Integrated bag hook MBA Ergonomic Styling Lever for Rapid Positioning Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides, solds separately High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-3 Application: Carbine Length For caliber: .223, .308 Buttstock Weight: 19.2 oz Extended Length of Pull: 15 5/8" Collapsed Length of Pull: 11 11/16" Overall Extended Length: 8 3/4" Overall Collapsed Length: 7 11/16" Cheek Rise : 1" Fully Extended Additional Length-of-Pull: 1 1/16″ MADE IN THE USA

  The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the integrated Picatinny rail allows for attaching a mono-pod or other accessories and the Anti-rattle set screw allows for adjustment when used with a Mil-spec buffer tube. The MBA-5 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab below. The MBA-5 is Grovtec™ Quick Detach sling cup ready*. Paired with our Chubby Grip® and Palm Handguard® the New MBA-5 is just the right choice for your AR. Note: The MBA-5 is designed with a non-adjustable, flared cheek rest and is not intended to provide vertical adjustment. Order an MBA-3 or add a Cheek Rest Assembly to your MBA-4 for full cheek rest adjust ability on a Carbine butt stock. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit Compatible accessories see under this article, accessories Features: Lightweight Carbine Buttstock MBA Ergonomic Styling Paddle Adjustment Lever for Rapid Positioning Flared Cheek Rest Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides** Rubber Buttpad High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-5 Application: Carbine Length For caliber: .223, .308, 9mm Buttstock Weight: 8.95 oz Extended Length of Pull: 14.5" Collapsed Length of Pull: 11.5" Material: Dupont Zytel 30% glass filled nylon MADE IN THE USA

  The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the integrated Picatinny rail allows for attaching a mono-pod or other accessories and the Anti-rattle set screw allows for adjustment when used with a Mil-spec buffer tube. The MBA-5 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab below. The MBA-5 is Grovtec™ Quick Detach sling cup ready*. Paired with our Chubby Grip® and Palm Handguard® the New MBA-5 is just the right choice for your AR. Note: The MBA-5 is designed with a non-adjustable, flared cheek rest and is not intended to provide vertical adjustment. Order an MBA-3 or add a Cheek Rest Assembly to your MBA-4 for full cheek rest adjust ability on a Carbine butt stock. Informations: Compatible with AR-15 / AR-10 Mil-Spec or Commercial 6-position Carbine Length buffer tubes Certain after Market Commercial Buffer Tubes that exceed 1.172″ diameter, may NOT fit Compatible accessories see under this article, accessories Features: Lightweight Carbine Buttstock MBA Ergonomic Styling Paddle Adjustment Lever for Rapid Positioning Flared Cheek Rest Anti-rattle set screw* Integrated Picatinny Rail for Mono-pod attachment Available in Black or Flat Dark Earth Quick Release Cup Pockets, both sides** Rubber Buttpad High-Strength Glass-filled Nylon Specifications: Buttstock Type: MBA-5 Application: Carbine Length For caliber: .223, .308, 9mm Buttstock Weight: 8.95 oz Extended Length of Pull: 14.5" Collapsed Length of Pull: 11.5" Material: Dupont Zytel 30% glass filled nylon MADE IN THE USA

  The LUTH-AR Mil-Spec Carbine Buffer Assembly – .223/5.56 is built to military specifications for optimal performance in your AR-15. Made from durable aluminum, it includes everything you need for easy installation. Trust in its reliable construction for all your shooting needs.Kit includes recoil buffer components for a new .223 AR15 Carbine build or to convert your current AR15 to use a Mil-Spec carbine buffer tube recoil system. Kit includes: Mil-Spec 6-Position/Carbine Tube, Material: 6061-T6 Aluminum, Finish: Hardcoat Anodized Black .223/5.56 Buffer Spring Carbine length .223/5.56 Buffer 3.2 oz Carbine length Latch Plate Lock Ring Information: Compatible to AR-15 Mil-Spec Receivers Compatible to Mil-Spec Diameter Stocks Compatible accessories see under this article, accessories  MADE IN THE USA

  The LUTH-AR Mil-Spec Carbine Buffer Assembly – .308/7.62 is built to military specifications for optimal performance in your AR-10. Made from durable aluminum, it includes everything you need for easy installation. Trust in its reliable construction for all your shooting needs. Kit includes recoil buffer components for a new .308/7.62 AR build or to convert your current AR to a Mil-Spec carbine buffer tube recoil system. Kit includes: Mil-Spec 6-Position/Carbine Tube, Material: 6061-T6 Aluminum, Finish: Hardcoat Anodized Black .308/7.62 Buffer Spring Carbine length .308/7.62 Buffer 3.8 oz Carbine length Latch Plate Lock Ring Information: Compatible to AR-10 / DPMS / DPMS Clone Receivers Compatible to Mil-Spec Diameter Stocks Compatible accessories see under this article, accessories  MADE IN THE USA

  The LUTH-AR Mil-Spec Carbine Buffer Assembly – 9mm is built to military specifications for optimal performance in your AR-15. Made from durable aluminum, it includes everything you need for easy installation. Trust in its reliable construction for all your shooting needs.Kit includes recoil buffer components for a new 9mm AR15 Carbine build or to convert your current AR-9 to use a Mil-Spec carbine buffer tube recoil system. Kit includes: Mil-Spec 6-Position/Carbine Tube, Material: 6061-T6 Aluminum, Finish: Hardcoat Anodized Black Buffer Spring Carbine length 9mm Buffer 5.45 oz Carbine length Latch Plate Lock Ring Information: Compatible to AR-15 / AR-9 / 9mm Mil-Spec Receivers Compatible to Mil-Spec Diameter Stocks Compatible accessories see under this article, accessories  MADE IN THE USA

  This AR Magazine Catch is a high-quality replacement part for your AR-style rifle, ensuring proper function and reliability. Its durable construction ensures it can withstand the toughest shooting conditions. Keep your rifle in top condition with the AR Magazine Catch. Specs: Compatible with AR-15 / M4 Mil-Spec Lower Receiver Finish: Manganese Phosphate 100% Made in the USA Compatible accessories see under this article, accessories MADE IN THE USA

  This AR Magazine Catch Spring is a high-quality replacement part for your AR-style rifle, ensuring proper function and reliability. Its durable construction ensures it can withstand the toughest shooting conditions. Keep your rifle in top condition with the AR Magazine Catch. Specs: Compatible with AR-15 / M4 Mil-Spec Lower Receiver Material: Stainless Steel 100% Made in the USA Compatible accessories see under this article, accessories MADE IN THE USA

  The AR15 selector detent ensures smooth and reliable operation of your rifle’s safety selector. Made from high-grade materials, this detent is built to last and withstand the rigors of heavy use. With its easy-to-install design, the selector detent is a crucial component that ensures your rifle operates flawlessly, giving you confidence in the field or on the range. Specs: Compatible with AR-15 / M4 Mil-Spec Lower Receiver 100% Made in the USA Compatible accessories see under this article, accessories MADE IN THE USA

  The AR15 Safety Selector Spring ensures smooth and reliable operation of your rifle’s safety selector, also compatible as AR15 Ejector Spring. Made from high-grade materials, this spring is built to last and withstand the rigors of heavy use. With its easy-to-install design, the selector detent spring is a crucial component that ensures your rifle operates flawlessly, giving you confidence in the field or on the range. Specs: Compatible with AR-15 / M4 Mil-Spec Lower Receiver Compatible with AR-15 5.56 Mil-Spec bolts 100% Made in the USA Compatible accessories see under this article, accessories MADE IN THE USA

  This Premium Carbine Buffer Tube – Mil-Spec – 6 Position works with Mil-Spec stocks and with LUTH-AR MBA-3, MBA-4 and MBA-5 Butt Stocks. Specs: Mil-Spec 6-Position/Carbine Tube, Material: 6061-T6 Aluminum, Finish: Hardcoat Anodized Black Overall Length: 7 3/4" Weight Ounce: 3.9 Weight lbs: .24 UPC Code: 859819007133 Information: Compatible to AR-15 Mil-Spec Receivers Compatible to AR-10 .308 Receivers from US manufactures Compatible with Carbine Length Springs Compatible with Carbine Length Buffers Compatible to Mil-Spec Diameter Stocks Compatible accessories see under this article, accessories  MADE IN THE USA

  Looking to build a high-quality retro looking AR?  The Retro 601 Style A1 Triangle Charging Handle is a stylish and functional upgrade for your AR-style rifle. It features a vintage 601-style design and smooth, reliable operation, making it a great choice for both form and function. Based off the original AR-15 Retro 601 charging handle. Specs: Based off the original AR-15 Retro 601 charging handle. 6061-T6 Aluminum Forging Hard Coat Anodize Dark Gray Informations:  Compatible only to A1 Upper Receiver Compatible accessories see under this article, accessories MADE IN THE USA

  Looking to build a high-quality retro looking AR?  Introducing the NEW Luth-AR M16 A1 Assembled Upper Receiver! The M16A1, adopted in the late 1960s, was designed to be a lighter and more reliable weapon than the M14 it replaced. Its development and deployment in the Vietnam War, and the subsequent modifications to address early issues, solidified its reputation and made it a standard issue for U.S. troops. It has since transitioned to civilian use, favored by enthusiasts, collectors, and competitive shooters. Beyond its historical significance, the M16A1 upper receiver continues to be relevant today. It is because of this that Luth-AR has decided to add it to its family of Retro Upper Receivers. For those who appreciate the classic look and feel of the M16A1, additional reproductions and original parts are available to build or restore M16A1 clone rifles. In essence, the Luth-AR M16 A1 Assembled Upper Receiver represents a blend of historical importance, engineering excellence, and functional adaptability. Upper Specs: Luth-AR Exclusive Stacked DC Forge Mark Forward assist lug 7075-T6 Aluminum Forging Hard Coat Anodize Black No M4 Feed Ramps No Deflector A1 Rear Sight Assembly Installed A1 Port Door Cover Assembly installed Teardrop Forward Assist Assembly installed Informations:  Compatible accessories see under this article, accessories MADE IN THE USA

  Looking for a high-quality bolt carrier for your A1Slick Side AR-style rifle? Look no further than our Chromed, fully assembled AR .223/5.56 bolt carrier ready to install and use. Made from top-grade materials and designed for reliable performance, this bolt carrier is a great choice for your rifle. Get yours today and take the first step towards improved accuracy and performance. Built from 8620 Steel, heat treated to Army specifications, Chrome Lined with a Chrome exterior finish. Specs: Chrome Bolt Carrier without Forward Assist Serrations Chrome Carrier Key Firing Pin Chrome Cam Pin Chrome Retro Firing Pin Retaining Pin Bolt carrier key screws (2) Bolt Carrier Specs: Carrier: 8620 steel Cam pin: 4340 Alloy steel Carrier key: 4130 Alloy steel Army Spec Heat Treatment Chrome Lined and Chrome Finish Full auto cut only at this time Bolt: C158 Material Mil-Spec heat treat Chrome Finish Extractor: 4140 Chrome Moly Machined from bar-stock Mil-Spec heat treat Chrome Finish NOTE: C.I.P. NOT included MADE IN THE USA

  Upgrade your AR15 with our A1 Butt Stock Kit, a comprehensive package that includes everything you need for enhanced performance and comfort. Crafted with precision, this kit includes a durable buffer tube, a reliable buffer, comfortable stock, and a high-quality spring. Whether you’re a seasoned shooter or just starting out, our A1 Butt Stock Kit ensures stability, reliable recoil, and a classic retro look and feel. Elevate your shooting experience with this essential upgrade, designed to meet the demands of discerning firearm enthusiasts. Upgrade today and experience the difference. Available in Black or OD Green The A1 stock is made using modern glass filled nylon making it strong even without a foam core. It does include a screw to attach the stock to the buffer tube. Includes: A1 Butt Stock – BS-A1 Extension tube – BS-09 .223/5.56 Rifle Buffer Spring – BS-10B .223/5.56 Rifle Buffer – BS-11 A1 length screw included in trap door of stock MADE IN THE USA

  Upgrade your AR15 with our A1 Butt Stock Kit, a comprehensive package that includes everything you need for enhanced performance and comfort. Crafted with precision, this kit includes a durable buffer tube, a reliable buffer, comfortable stock, and a high-quality spring. Whether you’re a seasoned shooter or just starting out, our A1 Butt Stock Kit ensures stability, reliable recoil, and a classic retro look and feel. Elevate your shooting experience with this essential upgrade, designed to meet the demands of discerning firearm enthusiasts. Upgrade today and experience the difference. Available in Black or OD Green The A1 stock is made using modern glass filled nylon making it strong even without a foam core. It does include a screw to attach the stock to the buffer tube. Includes: A1 Butt Stock – BS-A1 Extension tube – BS-09 .223/5.56 Rifle Buffer Spring – BS-10B .223/5.56 Rifle Buffer – BS-11 A1 length screw included in trap door of stock MADE IN THE USA

  Installing a quality barrel is arguably the #1 way to improve your AR’s accuracy.  Putting extra weight forward, a Bull Barrel helps minimize gun movement. The thicker barrel reduces barrel vibration, and takes longer to heat up, allowing more shots on target before accuracy starts to deteriorate. Specs: Fluted Bull Barrel, 416 SS Length: 24″ Chamber: .223 Rem Twist: 1-9 RH Thread Pitch: 1/2 x 28 Gas Block Diameter .936 Gas Port Diameter: .097″ – .098″ Gas Tube Length: Rifle Lands and Grooves: 5R Rifling M4 Feed Ramps Button Broached Weight: 3 lb 14 oz NOTE: C.I.P. NOT included Not for use with 5.56 Nato ammunition For compatible accessories, see accessories under this article MADE IN THE USA

  This 24″ Stainless Steel Bull Barrel complete upper receiver assembly is the perfect choice for precision shooting. The fluted bull barrel profile provides adds strength for stability, reducing recoil and increasing accuracy. The barrel is made of high-quality stainless steel, providing durability and longevity. The 1-9 twist rate is suitable for stabilizing heavy projectiles. This is an excellent option for shooters who want a heavy barrel with precision shooting in mind. Starts with our 24″, .223 caliber fluted bull barrel made from 416 SST with a 1-9″ twist mated to our A3 Flattop receiver which includes our bolt carrier, charging handle, forward assist and ejection port cover. The upper is then topped off with our lo-profile gas system and our ergonomic  15″ Palm Handguard® with KeyMod or M-LOK® slots and a Picatinny top-rail. Includes: HG-V-15K – M-LOK® Palm® Handguard – Vented 15″ BL-B24FT – 24″ Bull Barrel, Fluted, Threaded 416 SST FTT-EA1 – A3 Upper Receiver Assembled BC-A-223 – Fully Assembled Bolt Carrier – .223 BL-04 – Rifle Length Gas Tube GB-LP936 – Gas Block .936 UR-19 — Charging Handle BL-06-A2 — A2 Flash Hider Upper Specs: 7075-T6 Forging Hard coat anodize Black Bolt Specs: Bolt: Carpenter 158 steel Extractor: 4140 Alloy steel Army Spec Heat Treatment Manganese Phosphate Bolt Carrier Specs: Carrier: 8620 steel Cam pin: 4340 Alloy steel Carrier key: 4130 Alloy steel Army Spec Heat Treatment Manganese Phosphate Barrel Specs: 24″ Fluted Bull Barrel 416 Stainless Steel Chambered in .223 REM Threaded Barrel — Thread Pitch 1/2 x 28 Gas Block Diameter .936 Gas Tube Length — Rifle 1-9 RH Barrel Twist 5R Rifling M4 Feed Ramps Button Broached Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Compatibel accessories, see under this article, accessories MADE IN THE USA

  The 11.5” government profile barrel assembly is a versatile option for your next build. It features a 1-7 twist rate, optimized for stabilizing a wide range of bullet weights. The assembly comes with an F marked front sight base and a 2-piece handguard, making it easy to install and use. The barrel is made of high-quality 4150 steel, ensuring durability and longevity. The government profile gives this assembly a sleek and classic look, making it suitable for both recreational and professional use. This is an excellent option for shooters who want a classic look with modern performance. Starts with our 11.5″ barrel with F Marked Front Sight Base, 5.56 mm barrel made from 4150 CMV with a 1-7″ twist mated to our A3 Flattop receiver which includes our bolt carrier, charging handle, forward assist and ejection port cover. Includes: HG-A2 2-Piece CAR style Handguard BL-F11-7 – 11.5″ Government Profile Barrel w/F marked/FSB 1-7 Twist FTT-EA1 – A3 Upper Receiver Assembled BC-A-223 – Fully Assembled Bolt Carrier – 5.56 mm BL-04A – Carbine Gas Tube BL-750F  F Marked Front Sight Base UR-19 — Charging Handle BL-06-A2 — A2 Flash Hider Upper Specs: 7075-T6 Forging Hard coat anodize Black Bolt Specs: Bolt: Carpenter 158 steel Extractor: 4140 Alloy steel Army Spec Heat Treatment Manganese Phosphate Bolt Carrier Specs: Carrier: 8620 steel Cam pin: 4340 Alloy steel Carrier key: 4130 Alloy steel Army Spec Heat Treatment Manganese Phosphate Barrel Specs: Government profile 11.5″ w/F marked FSB Barrel 5.56 mm 4150 CMV (not chrome lined) Threaded Barrel — Thread Pitch 1/2 x 28 Gas Journal Diameter .750 Gas Tube Length — Carbine 1-7 RH Barrel Twist 6 Lands and Groves M4 Feed Ramp Button Broached Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Compatibel accessories, see under this article, accessories MADE IN THE USA

  The 14.5” SOCOM profile barrel assembly is a versatile option for your next build. It features a 1-7 twist rate, optimized for stabilizing a wide range of bullet weights. The assembly comes with an F marked front sight base and a 2-piece handguard, making it easy to install and use. The barrel is made of high-quality 4150 steel, chrome lined, ensuring durability and longevity. The SOCOM profile gives this assembly a sleek and classic look, making it suitable for both recreational and professional use. This is an excellent option for shooters who want a classic look with modern performance. Starts with our 14.5″ M4 SOCOM profile Chrome Lined barrel with F Marked Front Sight Base, 5.56 mm, made from 4150 CMV steel with a 1-7 twist mated to our A3 Flattop receiver which includes our chrome lined bolt carrier, 7075 charging handle, forward assist and ejection port cover. Includes: BL-F14-7 – 14.5″ M4 SOCOM Profile Barrel Chrome Lined with F marked Front Sight Base HG-A2 – 2-Piece CAR style Handguard FTT-EA1 – A3 Upper Receiver Assembled BC-A-223C – Complete Bolt Carrier Group – Chrome Bores – Manganese Phosphate exterior finish BL-04A – Carbine Gas Tube BL-750F 750 F Marked Front Sight Base UR-19-7075 — Charging Handle (7075 aluminum) BL-06-A2 — A2 Flash Hider Upper Specs: 7075-T6 Forging Hard coat anodize Black Bolt Specs: Bolt: Carpenter 158 steel Extractor: 4140 steel Army Spec Heat Treatment Manganese Phosphate Bolt Carrier Specs: Manganese Phosphate Chrome lined Bore Carrier: 8620 steel Cam pin: 4340 steel Carrier key: 4130 steel Army Spec Heat Treatment Barrel Specs: Chrome Lined 14.5″ M4 SOCOM Profile Barrel with Front Sight Base Chambered in 5.56 NATO Caliber: 5.56 NATO / .223 REM 4150 CMV Chrome Lined Threaded Barrel — Thread Pitch 1/2 x 28 Gas Block Journal Diameter .750 Gas Tube Length — Carbine 1-7 RH Barrel Twist M4 Feed Ramps Button Broached Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Compatibel accessories, see under this article, accessories MADE IN THE USA

  This A1 C7 Retro Complete Upper Barrel Assembly seamlessly merges the iconic A1 aesthetics with contemporary performance enhancements. At its core is a robust 20″ chrome-lined, 1-7 twist barrel, designed for long-lasting durability and accuracy, finished in manganese phosphate for exceptional resistance against corrosion while retaining a vintage military appearance. The barrel is paired with a .625″ non-F marked front sight base (FSB), staying true to the A1 era’s precision while maintaining practical functionality. The upper receiver is a C7-style complete upper receiver, featuring A1 Rear sight with a built-in brass deflector, bridging classic looks with enhanced practicality. An A2 charging handle provides easy manipulation, while the A2 hand guard, available in either black or OD green, offers modern durability with a nod to the timeless design. For effective muzzle control, the upper is finished with an A2 flash hider, minimizing muzzle flash while enhancing shooting stability. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Complete Bolt Carrier Group (BCG)– Chrome Lined – Manganese Phosphate exterior finish Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design C7 complete upper receiver with built-in brass deflector A2 charging handle for smooth operation A2 hand guard for modern durability and heat management A2 flash hider for optimal muzzle control and reduced flash Ideal for retro rifle builders or shooters who seek to blend the classic A1 appearance with the reliability and performance of modern manufacturing. Specifications: UR-01-E3-M4 - A1-C7 Retro Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-01 – A2 Front Sight Post (Square) A2 Delta Ring – Black A1 Rear Sight Kit (UR-21A) A2 Port Door Cover Kit (UR-05A) Teardrop Forward assist BC-A-223C – Complete Bolt Carrier Group – Chrome Bores – Manganese Phosphate exterior finish UR-19 – A2 Charging Handle – Black HG-A2 – A2 Handguard – ODG BL-06-CW – A2 Crush Washer BL-06-A2 – A2 Flash Hider Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

  This A1 C7 Retro Complete Upper Barrel Assembly seamlessly merges the iconic A1 aesthetics with contemporary performance enhancements. At its core is a robust 20″ chrome-lined, 1-7 twist barrel, designed for long-lasting durability and accuracy, finished in manganese phosphate for exceptional resistance against corrosion while retaining a vintage military appearance. The barrel is paired with a .625″ non-F marked front sight base (FSB), staying true to the A1 era’s precision while maintaining practical functionality. The upper receiver is a C7-style complete upper receiver, featuring A1 Rear sight with a built-in brass deflector, bridging classic looks with enhanced practicality. An A2 charging handle provides easy manipulation, while the A2 hand guard, available in either black or OD green, offers modern durability with a nod to the timeless design. For effective muzzle control, the upper is finished with an A2 flash hider, minimizing muzzle flash while enhancing shooting stability. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Complete Bolt Carrier Group (BCG)– Chrome Lined – Manganese Phosphate exterior finish Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design C7 complete upper receiver with built-in brass deflector A2 charging handle for smooth operation A2 hand guard for modern durability and heat management A2 flash hider for optimal muzzle control and reduced flash Ideal for retro rifle builders or shooters who seek to blend the classic A1 appearance with the reliability and performance of modern manufacturing. Specifications: UR-01-E3-M4 - A1-C7 Retro Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-01 – A2 Front Sight Post (Square) A2 Delta Ring – Black A1 Rear Sight Kit (UR-21A) A2 Port Door Cover Kit (UR-05A) Teardrop Forward assist BC-A-223C – Complete Bolt Carrier Group – Chrome Bores – Manganese Phosphate exterior finish UR-19 – A2 Charging Handle – Black HG-A2 – A2 Handguard – Black BL-06-CW – A2 Crush Washer BL-06-A2 – A2 Flash Hider Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

  This A1 Slick-Side Retro Complete Upper Barrel Assembly blends timeless design with modern performance for the discerning enthusiast. It features a 20″ 1-7 twist, chrome-lined barrel for superior accuracy and durability, with a manganese phosphate finish that resists corrosion while maintaining a period-correct appearance. Perfect for retro enthusiasts or modern shooters who appreciate a classic design with the performance of today’s technology. The barrel is paired with a front sight base (FSB), (.625″ diameter) and non-F marked for historical authenticity. The triangular A1 charging handle adds to the classic profile, giving you a smooth and efficient cycling experience every time. The A1 handguard not only preserves the traditional look, but maintains historical accuracy utilizing rivets to attach the heat shield for heat dissipation and a firm grip. At the front end, you’ll find the early A1 duckbill flash hider, a distinctive feature that reduces muzzle flash while maintaining a low-profile design. This upper is perfect for anyone looking to complete a retro build while benefitting from modern materials and construction techniques. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Full Chrome Complete Slick-Side Bolt Carrier Group Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design A1 Triangular charging handle for an authentic, sleek design A1 handguard with riveted heat shields for a classic aesthetic and functionality Early A1 duckbill flash hider for period-correct muzzle control Specifications: UR-01-E3-S Slick-Side Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-02 – A1 Front Sight Post (Round) A1 Slip Ring – Black Assembled with Retro A1 Rear Sight Kit (UR-21A-R) Retro A1 Port Door Cover Kit (UR-05A-R) UR-19A1 – Retro A1 Triangle Charging Handle – Black HG-A1-G – Retro A1 Handguard – ODG BL-06-LW – A1 Lock Washer BL-3P-DB – Early A1 Duckbill Flash Hider BC-AS-223FC – Full Chrome Complete Slick-Side Bolt Carrier Group Retro Chrome Firing Pin Retro Chrome retaining pin  Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

  This A1 Slick-Side Retro Complete Upper Barrel Assembly blends timeless design with modern performance for the discerning enthusiast. It features a 20″ 1-7 twist, chrome-lined barrel for superior accuracy and durability, with a manganese phosphate finish that resists corrosion while maintaining a period-correct appearance. Perfect for retro enthusiasts or modern shooters who appreciate a classic design with the performance of today’s technology. The barrel is paired with a front sight base (FSB), (.625″ diameter) and non-F marked for historical authenticity. The triangular A1 charging handle adds to the classic profile, giving you a smooth and efficient cycling experience every time. The A1 handguard not only preserves the traditional look, but maintains historical accuracy utilizing rivets to attach the heat shield for heat dissipation and a firm grip. At the front end, you’ll find the early A1 duckbill flash hider, a distinctive feature that reduces muzzle flash while maintaining a low-profile design. This upper is perfect for anyone looking to complete a retro build while benefitting from modern materials and construction techniques. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Full Chrome Complete Slick-Side Bolt Carrier Group Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design A1 Triangular charging handle for an authentic, sleek design A1 handguard with riveted heat shields for a classic aesthetic and functionality Early A1 duckbill flash hider for period-correct muzzle control Specifications: UR-01-E3-S Slick-Side Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-02 – A1 Front Sight Post (Round) A1 Slip Ring – Black Assembled with Retro A1 Rear Sight Kit (UR-21A-R) Retro A1 Port Door Cover Kit (UR-05A-R) UR-19A1 – Retro A1 Triangle Charging Handle – Black HG-A1 – Retro A1 Handguard – Black BL-06-LW – A1 Lock Washer BL-3P-DB – Early A1 Duckbill Flash Hider BC-AS-223FC – Full Chrome Complete Slick-Side Bolt Carrier Group Retro Chrome Firing Pin Retro Chrome retaining pin  Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

  This 14.5″ SOCOM profile barrel is perfect for your AR-15 build. It features a front sight tower for easy targeting and enhanced accuracy and longevity. The 1:7 twist rate is ideal for a wide range of bullet weights. Get the best performance from your rifle with this high-quality barrel. Specs: M4 SOCOM, 4150 CMV Chrome Lined Length: 14.5″ Twist: 1-7 RH Chamber: 5.56x45mm Nato Thread Pitch: 1/2 x 28 Gas Tube Length: Carbine M4 Feed Ramps Finish: Mag Phosphate Handguard Cap: Round Included barrel nut NOTE: C.I.P. NOT included Does not include front sight post, spring and detent For use with 5.56 Nato and .223 Rem ammunition For compatible accessories, see accessories under this article MADE IN THE USA

  Following the introduction of the MkG™ many asked for a similar 9mm AR pistol that used the ubiquitous double stack 9mm Glock-pattern magazines, and thus the MkGs platform was born. Equipped with a host of essential AR features like last round bolt hold open, this 9mm RESOLUTE® MkGs is one of the most versatile pistol caliber carbines/personal defense weapons ever made. The RESOLUTE series represents the most innovative AR pistols and SBRs available today. From the quick deploying RIPSTOCK®, to the stylized receivers and EML™ handguards, every RESOLUTE is tailor-made to be the personal defense weapon you can always depend on. New EML4 handguards feature M-LOK® slots at 3, 6, & 9 o’clock positions and a full length picatinny top rail for accessories as well as an integrated handstop. Radial Delayed Blowback™ Operating System Originally developed for the .45 ACP MkGs platform, CMMG has adapted our Radial Delayed Blowback system across our pistol caliber lineup to create pistols and rifles with a softer recoil impulse and reduced bolt weight compared to traditional straight blowback systems. Check out our CMMG Resources article & video to learn more about what sets Radial Delayed Blowback apart. MkGs ZEROED parts and accessories – Quality comes standard The AR platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. Everything from the RIPSTOCK to the full kit of ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none and each RESOLUTE comes equipped with a slew of ZEROED parts standard, including: ZEROED Pistol Grip ZEROED 60°/90° Ambi Safety ZEROED AR15 Ambi Charging Handle ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Linear Compensator 9mm ZEROED Drop-In Trigger PLATFORM MKGS CALIBER 9mm Luger / 9X19 OPERATING SYSTEM Fixed Ejector RADIAL DELAYED BLOWBACK BARREL LENGTH 8 BARREL TWIST 1:10 BARREL CONTOUR MT BARREL MATERIAL 4140CM, SBN     MUZZLE DEVICE CMMG ZEROED LINEAR COMPENSATOR MUZZLE THREAD 1/2 X 28 GAS PORT LOCATION N/A GAS BLOCK N/A UPPER RECEIVER BILLET 6061 T6 ALUMINUM LOWER RECEIVER MKGS FORGED 7075 T6 ALUMINUM HAND GUARD CMMG EML7 M-LOK FINISH CERAKOTE ARMOR BLACK CHARGING HANDLE CMMG ZEROED AMBI PISTOL GRIP CMMG ZEROED PISTOL GRIP BUFFER TYPE CARBINE RECEIVER EXTENSION CMMG 6 POSITION Fastback STOCK / BRACE CMMG RIPSTOCK TRIGGER TYPE ZEROED Drop-In TRIGGER GUARD INTEGRATED SAFETY SELECTOR CMMG ZEROED 60/90 DEGREE MAGAZINE 10 ROUND WEIGHT 4.9 LBS LENGTHS 23.9"/60,6cm - 27,9''/70,9cm   INFORMATIONS   EXW 10 round Magpul PMAG® magazine AT - Category B with 10 round magazine Including C.I.P.  MADE IN THE USA

  Perfect for low-cost training, introducing new shooters to firearms, small game/varmint hunting, and some good old-fashioned mag dumps, .22 LR has long been a round that is beloved by many. With a 16.1” nitride finished barrel, this RESOLUTE® isn’t just a .22 that looks like an AR, it’s a full-blooded AR that just happens to be chambered in .22 LR. Being built on our Mk4 – AR15 platform means you not only get the ultimate .22 LR AR, but you can also change calibers in seconds by pairing your Mk4 lower receiver group with another AR15 upper receiver group (and corresponding magazines) in the caliber of your choice. When full-size rifles are too cumbersome and pistols/SBRs don’t deliver the long-range ballistic performance you need, the CMMG RESOLUTE line of carbine length rifles is the answer. Fitted with the suite of ZEROED parts and accessories as well as our legendary RIPSTOCK, the RESOLUTE is the rifle that’s never out of place. The new EML™ 15 handguard brings style to the next level. M-LOK® attachment slots are found where expected at the 3, 6, and 9 o’clock positions as well as on top at 12 o’clock with the omission of a full-length Picatinny section found on our previous handguard. This reduces weight while the additional M-LOK section still gives shooters a place to mount those must-have accessories. With a range of choices, just pick the caliber you need for the job and let your rifle do the talking. Mk4 ZEROED parts and accessories – Quality comes standard The AR15 platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. CMMG’s ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none. Each RESOLUTE comes equipped with a slew of ZEROED parts standard, including: ZEROED Drop-In Trigger ZEROED Pistol Grip ZEROED Trigger Guard ZEROED 60°/90° Ambi Safety ZEROED 22LR Ambi Charging Handle ZEROED Ambi Mag Catch ZEROED Extended Mag Release Button ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Muzzle Brake 5.56mm Specifications Platform Mk4 Caliber .22 LR Operating System Traditional Blowback Barrel Length 16.1 Barrel Twist 1:16 Barrel Contour M4 Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Muzzle Brake Muzzle Thread 1/2 x 28 Gas Port Location N/A Gas Block N/A Upper Receiver Billet 6061 T6 Aluminum Lower Receiver Mk4 Forged 7075 T6 Aluminum Hand Guard CMMG EML13.5 M-LOK Finish Cerakote Charging Handle CMMG ZEROED Ambi Pistol Grip CMMG ZEROED Pistol Grip Buffer Type Carbine Receiver Extension CMMG 6 Position Fastback w/Ambi Sling Plate Stock / Brace CMMG RipStock Trigger Type ZEROED Drop-In Single Stage Trigger Guard CMMG ZEROED Trigger Guard Safety Selector CMMG ZEROED 60/90 Degree Magazine CMMG 25rd Weight 6.0 lbs Length 31.5" - 35.7"   Informations:    C.I.P. included AT - Category B Included EXW 25 ROUND MAGAZINE Compatible accessories see under this article, accessories  MADE IN THE USA

  Perfect for low-cost training, introducing new shooters to firearms, small game/varmint hunting, and some good old-fashioned mag dumps, .22 LR has long been a round that is beloved by many. With a 16.1” nitride finished barrel, this RESOLUTE® isn’t just a .22 that looks like an AR, it’s a full-blooded AR that just happens to be chambered in .22 LR. Being built on our Mk4 – AR15 platform means you not only get the ultimate .22 LR AR, but you can also change calibers in seconds by pairing your Mk4 lower receiver group with another AR15 upper receiver group (and corresponding magazines) in the caliber of your choice. When full-size rifles are too cumbersome and pistols/SBRs don’t deliver the long-range ballistic performance you need, the CMMG RESOLUTE line of carbine length rifles is the answer. Fitted with the suite of ZEROED parts and accessories as well as our legendary RIPSTOCK, the RESOLUTE is the rifle that’s never out of place. The new EML™ 15 handguard brings style to the next level. M-LOK® attachment slots are found where expected at the 3, 6, and 9 o’clock positions as well as on top at 12 o’clock with the omission of a full-length Picatinny section found on our previous handguard. This reduces weight while the additional M-LOK section still gives shooters a place to mount those must-have accessories. With a range of choices, just pick the caliber you need for the job and let your rifle do the talking. Mk4 ZEROED parts and accessories – Quality comes standard The AR15 platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. CMMG’s ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none. Each RESOLUTE comes equipped with a slew of ZEROED parts standard, including: ZEROED Drop-In Trigger ZEROED Pistol Grip ZEROED Trigger Guard ZEROED 60°/90° Ambi Safety ZEROED 22LR Ambi Charging Handle ZEROED Ambi Mag Catch ZEROED Extended Mag Release Button ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Muzzle Brake 5.56mm Specifications Platform Mk4 Caliber .22 LR Operating System Traditional Blowback Barrel Length 16.1 Barrel Twist 1:16 Barrel Contour M4 Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Muzzle Brake Muzzle Thread 1/2 x 28 Gas Port Location N/A Gas Block N/A Upper Receiver Billet 6061 T6 Aluminum Lower Receiver Mk4 Forged 7075 T6 Aluminum Hand Guard CMMG EML13.5 M-LOK Finish Cerakote Charging Handle CMMG ZEROED Ambi Pistol Grip CMMG ZEROED Pistol Grip Buffer Type Carbine Receiver Extension CMMG 6 Position Fastback w/Ambi Sling Plate Stock / Brace CMMG RipStock Trigger Type ZEROED Drop-In Single Stage Trigger Guard CMMG ZEROED Trigger Guard Safety Selector CMMG ZEROED 60/90 Degree Magazine CMMG 25rd Weight 6.0 lbs Length 31.5" - 35.7"   Informations:    C.I.P. included AT - Category B Included EXW 25 ROUND MAGAZINE Compatible accessories see under this article, accessories  MADE IN THE USA

  Designed to provide everything you want in an AR15, this BANSHEE™ SBR blends carbine-length ballistics with the compact size and maneuverability of an SBR, creating the ultimate 5.56mm BANSHEE SBR. Built on the modular Mk4 platform, this SBR is perfect for use with CMMG® conversion mags & matching caliber upper group. Available in a variety of cerakote finish options, the BANSHEE series represents the most innovative AR SBRs available today. From the quick deploying Fastback Ripstock, to the stylized receivers and EML™ handguards, every BANSHEE is tailor-made to be the personal defense weapon you can always depend on. With full length M-LOK® slots on both sides and the bottom of the handguard as well as M-LOK between the top picatinny rail sections, you’ll always have enough space for those must have accessories. Mk4 ZEROED parts and accessories – Quality comes standard The AR15 platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. Everything from the Fastback Ripstock to the full kit of ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none and each BANSHEE comes equipped with a slew of ZEROED parts standard, including: ZEROED Drop-In Trigger ZEROED Pistol Grip ZEROED Trigger Guard ZEROED 60°/90° Ambi Safety ZEROED AR15 Ambi Charging Handle ZEROED Ambi Mag Catch ZEROED Extended Mag Release Button ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Linear Compensator 5.56mm  Specifications Platform Mk4 Caliber 5.56x45mm/.223 Rem Operating System Direct Impingement Barrel Length 12.5 Barrel Twist 1:7 Barrel Contour MT Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Linear Compensator Muzzle Thread 1/2 x 28 Gas Port Location Carbine Gas Block .750" Upper Receiver Billet 6061 T6 Aluminum Lower Receiver Mk4 Forged 7075 T6 Aluminum Hand Guard CMMG EML11 M-LOK Finish Cerakote Armor Black Charging Handle CMMG ZEROED Ambi Pistol Grip CMMG ZEROED Pistol Grip Buffer Type Carbine Receiver Extension CMMG 6 Position Fastback w/Ambi Sling Plate Stock / Brace CMMG Ripstock Trigger Type ZEROED Drop-In Trigger Guard CMMG ZEROED Trigger Guard Safety Selector CMMG ZEROED 60/90 Degree Magazine 10rd Weight 5.9 lbs Length 72,0 - 82,5 cm   INFORMATIONS EXW 10 round magazine AT - Category B with 10 round magazine Including C.I.P.  MADE IN THE USA

  Designed to provide everything you want in an AR15, this BANSHEE™ SBR blends carbine-length ballistics with the compact size and maneuverability of an SBR, creating the ultimate 5.56mm BANSHEE SBR. Built on the modular Mk4 platform, this SBR is perfect for use with CMMG® conversion mags & matching caliber upper group. Available in a variety of cerakote finish options, the BANSHEE series represents the most innovative AR SBRs available today. From the quick deploying Fastback Ripstock, to the stylized receivers and EML™ handguards, every BANSHEE is tailor-made to be the personal defense weapon you can always depend on. With full length M-LOK® slots on both sides and the bottom of the handguard as well as M-LOK between the top picatinny rail sections, you’ll always have enough space for those must have accessories. Mk4 ZEROED parts and accessories – Quality comes standard The AR15 platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. Everything from the Fastback Ripstock to the full kit of ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none and each BANSHEE comes equipped with a slew of ZEROED parts standard, including: ZEROED Drop-In Trigger ZEROED Pistol Grip ZEROED Trigger Guard ZEROED 60°/90° Ambi Safety ZEROED AR15 Ambi Charging Handle ZEROED Ambi Mag Catch ZEROED Extended Mag Release Button ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Linear Compensator 5.56mm  Specifications Platform Mk4 Caliber 5.56x45mm/.223 Rem Operating System Direct Impingement Barrel Length 12.5 Barrel Twist 1:7 Barrel Contour MT Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Linear Compensator Muzzle Thread 1/2 x 28 Gas Port Location Carbine Gas Block .750" Upper Receiver Billet 6061 T6 Aluminum Lower Receiver Mk4 Forged 7075 T6 Aluminum Hand Guard CMMG EML11 M-LOK Finish Cerakote Coyote Tan Charging Handle CMMG ZEROED Ambi Pistol Grip CMMG ZEROED Pistol Grip Buffer Type Carbine Receiver Extension CMMG 6 Position Fastback w/Ambi Sling Plate Stock / Brace CMMG Ripstock Trigger Type ZEROED Drop-In Trigger Guard CMMG ZEROED Trigger Guard Safety Selector CMMG ZEROED 60/90 Degree Magazine 10rd Weight 5.9 lbs Length 72,0 - 82,5 cm   INFORMATIONS EXW 10 round magazine AT - Category B with 10 round magazine Including C.I.P.  MADE IN THE USA

  With a barrel length of only 8”, this BANSHEE™ Mk4 is the most condensed size .300 BLK SBR CMMG® makes today. Originally designed specifically for use in M4/AR15-pattern rifles, .300 BLK has often been compared to other popular intermediate cartridges like 7.62x39mm. Where .300 BLK stands out is in applications where other rounds suffer ballistically such as shorter barreled firearms, suppressed use, and subsonic cartridge loadings. Available in a variety of cerakote finish options, the BANSHEE series represents the most innovative AR SBRs available today. From the quick deploying Fastback Ripstock, to the stylized receivers and EML™ handguards, every BANSHEE is tailor-made to be the personal defense weapon you can always depend on. With full length M-LOK® slots on both sides and the bottom of the handguard as well as M-LOK between the top picatinny rail sections, you’ll always have enough space for those must have accessories. Mk4 ZEROED parts and accessories – Quality comes standard The AR15 platform is well known for its capability for customization but picking the right parts doesn’t have to be a nightmare of homework. Everything from the Fastback Ripstock to the full kit of ZEROED parts and accessories are made here in the USA with quality and attention to detail that is second to none and each BANSHEE comes equipped with a slew of ZEROED parts standard, including: ZEROED Drop-In Trigger ZEROED Pistol Grip ZEROED Trigger Guard ZEROED 60°/90° Ambi Safety ZEROED AR15 Ambi Charging Handle ZEROED Ambi Mag Catch ZEROED Extended Mag Release Button ZEROED AR15 Bolt Catch ZEROED AR15 Polymer Dust Cover ZEROED Linear Compensator 5.56mm Specifications Platform Mk4 Caliber .300 AAC Blackout Operating System Direct Impingement Barrel Length 8 Barrel Twist 1:7 Barrel Contour MT Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Linear Compensator Muzzle Thread 5/8 x 24 Gas Port Location Pistol Gas Block 0.750" Upper Receiver Billet 6061 T6 Aluminum Lower Receiver Mk4 Forged 7075 T6 Aluminum Hand Guard CMMG EML7 M-LOK Finish Cerakote Armor Black Charging Handle CMMG ZEROED Ambi Pistol Grip CMMG ZEROED Pistol Grip Buffer Type Carbine Receiver Extension CMMG 6 Position Fastback w/Ambi Sling Plate Stock / Brace CMMG Ripstock Trigger Type ZEROED Drop-In Trigger Guard CMMG ZEROED Trigger Guard Safety Selector CMMG ZEROED 60/90 Degree Magazine Magpul 10rd PMAG Weight 5.2 lbs Length 60,5 - 71,0 cm INFORMATIONS EXW 10 round magazine AT - Category B with 10 round magazine Including C.I.P.  MADE IN THE USA

  Whether you’re looking to finish up your next .22 LR build or have a dedicated .22 upper for some cheap plinking, put the 9” BANSHEE™ on your list. Designed to work with CMMG® .22 AR Conversion Mags and any standard AR15 lower group, this .22 LR upper doesn’t just look like an AR, it is an AR, and comes ready to accessorize to fit you best. Available in six different Cerakote finishes, all CMMG® Upper Groups come complete with bolt carrier group and ZEROED™ accessories including: ZEROED AR15 Polymer Dust Cover ZEROED AR15 Ambi Charging Handle ZEROED .22LR Flash Hider Specifications Platform Mk4 / AR-15 Caliber .22 LR Operating System Traditional Blowback Barrel Length 9 Barrel Twist 1:16 Barrel Contour MT Barrel Material 4140CM, SBN Muzzle Device CMMG ZEROED Flash Hider Muzzle Thread 1/2 x 28 Gas Port Location N/A Gas Block N/A Upper Receiver Billet 6061 T6 Aluminum Hand Guard CMMG EML7 M-LOK Finish Cerakote Armor Black Charging Handle CMMG ZEROED Ambi Weight 2.9 lbs Length 17.4"   INFORMATIONS AT - Category B Including C.I.P.    MADE IN THE USA

  Our AR gas tube roll pin is a high-quality replacement or upgrade for your AR-style rifle. It channels gas bleed-off from the gas block to the gas key and is an essential component of the rifle’s gas system. Made with durable materials and easy to install, this gas tube roll pin is a reliable choice for your firearm. Informations: Compatible to AR-15 / AR-10 Gas Tubes Compatible accessories see under this article, accessories What’s in a name? The Luth name is synonymous with Experience, Expertise, Knowledge, Innovation, and has been a driving force in the firearm industry for close to 40 years. Starting as a machinist 40 years ago Randy Luth founded D.P.M.S. / Panther Arms and grew the company to become one of the leading manufacturers of AR-15 firearms and firearm components in the world. MADE IN THE USA    

  Our AR gas tube is a high-quality replacement or upgrade for your AR-style rifle. It channels gas bleed-off from the gas block to the gas key and is an essential component of the rifle’s gas system. Made with durable materials and easy to install, this gas tube is a reliable choice for your firearm. Specs: Material: Stainless Steel Length: 15 3/16″ / 385,0 mm Informations: Compatible to AR-15 Mil-Spec Upper Receiver Gas tube roll pin included Compatible accessories see under this article, accessories What’s in a name? The Luth name is synonymous with Experience, Expertise, Knowledge, Innovation, and has been a driving force in the firearm industry for close to 40 years. Starting as a machinist 40 years ago Randy Luth founded D.P.M.S. / Panther Arms and grew the company to become one of the leading manufacturers of AR-15 firearms and firearm components in the world. MADE IN THE USA

  The AR Ambidextrous Safety Selector Switch is a must-have accessory for any serious firearm enthusiast. This switch allows for easy switching between safe and fire modes, with a design that is ambidextrous and easy to use with either hand. Its durable construction ensures it can withstand the toughest shooting conditions. Upgrade your AR with the Ambidextrous Selector/Safety Switch. Features: Finish: Manganese Phosphate Mil-Spec Specs: Overall Length: 1.45" Width: 1.13" Weight lbs: .05 Weight Ounce: .72 Informations: Compatible to AR-15 Mil-Spec Lower Receiver Compatible accessories see under this article, accessories What’s in a name? The Luth name is synonymous with Experience, Expertise, Knowledge, Innovation, and has been a driving force in the firearm industry for close to 40 years. Starting as a machinist 40 years ago Randy Luth founded D.P.M.S. / Panther Arms and grew the company to become one of the leading manufacturers of AR-15 firearms and firearm components in the world. MADE IN THE USA   

  Mil-Spec Firing Pin Retainer Pin Compatible with AR-15/M4/M16 Mil-Spec Bolt Carrier in 5.56 / .223 REM / 7.62x39 / .300 AAC Blackout etc., as well as to many 9mm BCG. Specs: Material: Carbon Steel Heat Treat: HRC 45-50 Finish: Manganese Phosphate MADE IN THE USA  

  The AR Safety Selector Switch is a must-have accessory for any serious firearm enthusiast. This switch allows for easy switching between safe and fire modes, with a design that is easy to use with either hand. Its durable construction ensures it can withstand the toughest shooting conditions. Upgrade your setup with the Selector/Safety Switch. Informations:  Compatible to AR-15 Mil-Spec Lower For semi-auto AR-15 applications Finish: Manganese Phosphate MADE IN THE USA

  AR15/M4 Standard Weight Carbine Recoil Buffer - 3 ozSpecifications: Aluminum Body Construction Anodized Finish Weighs 3.0 oz. Contains Steel Weight Designed For Use with Mil-Spec and Com-Spec Carbine Buffer Tubes.

  MOD1- T1, Intermediate Length (BUFFER ONLY) (weight = approximately 4.7oz) Compatible accessories, see under this article, accessories. Lessens felt recoil, without compromising reliability Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system Increased internal counterweight travel reduces bolt bounce Uses a M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components BCM US Patent #10415907 IMPORTANT NOTE: MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extensions (BCM part #BCM-MK2RMS-M1T0 / BCM-MK2RMS-M1T1 / BCM-MK2RMS-M1T2) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.   MADE IN THE USA

  MOD1- T3, Intermediate Length (BUFFER ONLY) (weight = approximately 6.5oz) Compatible accessories, see under this article, accessories. Lessens felt recoil, without compromising reliability Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system Increased internal counterweight travel reduces bolt bounce Uses a M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement Made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components BCM US Patent #10415907 IMPORTANT NOTE: MK2 MOD 1 buffer series is to ONLY be used on the AR15 receiver platform and it ONLY works in conjunction with the BCM MK2 Receiver Extensions (BCM part #BCM-MK2RMS-M1T0 / BCM-MK2RMS-M1T1 / BCM-MK2RMS-M1T2) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION). To use any other component, not specifically developed to function with the MK2 MOD1 Intermediate Buffer can cause damage to the weapon and possibly injure the operator.   MADE IN THE USA

  The Strike Industries Advanced Receiver extension brings an updated aesthetic and increased functionality to an often neglected, yet highly important component of the AR15/AR10 weapon system. The scalloped surfaces decrease friction with tight fitting stocks, and shaves weight while retaining mass in critical stressed areas. COMPATIBILITY: AR- MIL-SPEC Stocks with Carbine length buffers Carbine length springs NOT COMPATIBLE:  Rifle length buffers or Rifle length springs and cannot work with the A5 buffer system.  Product Spec- Materials: 7075-T6 Aluminum- Length:7.28"- Tube Dia. 1.145"- Color:  Black- Weight: 3.8oz Package include- 1x 7-Position Advanced Receiver extension Features- 7-position MIL-SPEC diameter buffer tube- Fits onto any standard AR15 receiver.- Finer length of pull adjustment.- Supported buffer retainer- Compatible with Strike Industries Pit Viper StockMADE IN THE USA

BUILT FOR CLOSE-QUARTERS. The Maxim Defense MD15 Lower Receiver with our OEM PDW Pistol Brace is the ideal foundation for a compact, high-performance AR15 platform. Machined from forged 7075 Aluminium and finished with a Type III hard coat anodize, it’s built to Mil-Spec standards for strength and reliability at an affordable price point. Outfitted with a Mil-Spec lower parts kit, Maxim Grip, and the 3-position OEM PDW Pistol Brace, this lower delivers both control and adaptability in tight spaces. Collapsing to just 6.825” and extending fully to 10.5”, it offers a versatile fit for close-quarters maneuverability and stable shooting when needed. Pair it with your choice of Mil-Spec Upper Receiver Group to complete a CQB weapon system designed for durability and performance. No buttons to push, just pull the stock to deploy. At full extension, the Maxim PDW stock is the length of an extended carbine stock. And with 3 total positions you can adjust for maximum comfort and multiple scenarios. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense PDW Lower Receiver is simply the most thought out, versatile, and durable PDW stock on the market. COMPATIBILITY: For Caliber 5.56 / .223 REM / 7,62x39 / .300AAC etc.Compatible with AR-15 Upper Receivers according to Mil-Spec diametersCompatible with AR-15 bolt carrier groups according to Mil-Spec diametersCompatible with AR-15 Carbine length BuffersCompatible with AR-15 Carbine length Springs Package Contents: MAXIM DEFENSE MD:15 Mil-Spec Lower Receiver Assembly Informations: (DOES NOT INCLUDE BUFFER WEIGHT OR SPRING, NOT COMPATIBLE WITH MAXIM CQB OR SCW BUFFER SYSTEM)Compatible accessories see under this article, accessories Key Features: 7075 Forged Lower: Machined from Mil-Spec 7075 forged aluminum for rugged reliability and long-lasting durability.Multi-Cal AR15 Platform: Designed as a multi-caliber AR15 lower receiver for broad compatibility with Mil-Spec uppers. Type III Hard Anodized BlackMil-Spec Lower Parts Kit: Includes a Mil-Spec trigger and controls for dependable, straightforward operation.Maxim Defense Grip: Ergonomically designed to maximize comfort and control during extended shooting sessions. The textured surface ensures a secure grip even in adverse conditions.Maxim Defense OEM PDW Pistol Brace: Lightweight, compact 3-position brace collapses to 6.825” for maximum portability and extends to 10.5” for stability in shooting.QD attachment point at 6 o’clock position on housingAmbidex Safety Selector EngravingsUS Veteran designed and proudly made in the USA Dimensions: MIN Length from Buffer Housing 186mm (collapsed stock) MAX Length from Buffer Housing 250mm (extended stock)Weight 984g

  Premium PDX Lower Receiver, finally a built for comfort and durability for real-world use.  Born from the SOCOM PDW solicitation, the NEW Maxim Defense PDX™ is designed to handle the fierce demands of the Tier 1 community. The PDX™ dominates close-quarter encounters and achieves maximum energy on target. Finally, an SCW stock built for comfort and durability for real-world use. No buttons to push, just pull the stock to deploy. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense SCW Stock is simply the shortest, most thought out, versatile, and durable SCW stock on the market. FEATURES: MAXIM DEFENSE SCW™ Stock System Rapid deployment – no buttons to push MAXIM DEFENSE QD Interface Multipoint Steel Receiver Endplate RADIAN Talon® Ambidextrous Safety Selector ALG DEFENSE Combat Trigger Ambidextrous Safe/Semi/Auto Safety Selector Markings Enhanced Takedown and Pivot Pins Extended cheek weld Military grade materials Shortest overall length of any PDW COMPATIBILITY: For Caliber 5.56 / .223 REM / 7,62x39 / .300 AAC etc. Compatible only with MAXIM DEFENSE SCW™ BCG System Compatible only with MAXIM DEFENSE SCW™ Buffers PACKAGE CONTENTS MAXIM DEFENSE PDX Lower Receiver Assembly MAXIM DEFENSE SCW Gen 7 Stock MAXIM DEFENSE Spring, SCW Length Technical Specifications Adjustable Sub Compact Weapon Stock Extended Cheek Weld 4.0" 1st position (closed) 5.25" 2nd position 6.5" 3nd position 7.75" 4nd position 8.75 inches 5th position (fully extended) Material: 7075 Aluminum Alloy housing Color: Mil-Spec III Black Anodizing Informations: DOES NOT INCLUDE BUFFER WEIGHT NOT COMPATIBLE WITH AR-15 Buffer NOT COMPATIBLE WITH AR-15 MIL-SPEC BOLT CARRIER GROUPS Compatible accessories see under this article, accessories. Note: To place an order, contact your local firearm dealer MADE IN THE USA

FOR STABLE, COMPACT PERFORMANCE. The Maxim Defense MDX CQB Pistol Brace Lower Receiver delivers mission-ready performance in a compact package. Built from 7075 billet aluminum and finished with a Type III hard coat anodize, this lower is designed for durability and precision in demanding environments. Equipped with the Maxim Defense GEN:6 CQB Pistol Brace and CQB Standard 3.30 oz Buffer System, it collapses to just 5.3” for discreet maneuverability and extends to 10” for stability. Combined with the ALG Combat Trigger, ambidextrous Radian safety selector, ambidextrous Maxim magazine release, and Maxim grip, this lower provides the ideal balance of comfort, control, and adaptability. No buttons to push, just pull the stock to deploy. And with 4 total positions you can adjust for maximum comfort and multiple scenarios. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense CQB Lower Receiver is simply the most thought out, versatile, and durable CQB Pistol Brace on the market. COMPATIBILITY: For Caliber 5.56 / .223 REM / 7,62x39 / .300AAC etc. (The correct buffer weight is a fundamental requirement)Compatible with AR-15 Upper Receivers according to Mil-Spec diametersCompatible with AR-15 bolt carrier groups according to Mil-Spec diametersCompatible with Maxim Defense CQB Buffers onlyCompatible with Maxim Defense CQB Springs only Package Contents: MAXIM DEFENSE MDX CQB Mil-Spec Lower Receiver Complete Key Features: Multi-Caliber MDX 7075 Billet Lower: Precision-machined from 7075 billet aluminum for unmatched strength and rigidity while keeping weight to a minimum.Multi-Cal AR15 Platform: Designed as a multi-caliber AR15 lower receiver for broad compatibility with Mil-Spec uppers.Type III Hard Anodized BlackALG Combat Trigger: Outfitted with the proven ALG Combat Trigger, offering a crisp, consistent pull and reliable reset. Perfect for shooters demanding both speed and accuracy.Radian Selector: Features the premium Radian ambidextrous safety selector, engineered for smooth engagement and positive feedback. Built for high-stress environments where reliability matters most.Maxim Defense Grip: Ergonomically designed to maximize comfort and control during extended shooting sessions. The textured surface ensures a secure grip even in adverse conditions.Maxim Defense Ambidextrous Magazine Release: Enables quick, efficient reloads from either side, enhancing adaptability for all shooters.Maxim Defense GEN6 CQB Pistol Brace: Compact brace collapses to 5.3” and extends to 10”, offering portability and stability in one platform.Ambidextrous QD attachment pointsSafe/Semi/Auto safety selector markingsUS Veteran designed and proudly made in the USA Dimensions: MIN Length from Buffer Housing 150mm (collapsed stock) MAX Length from Buffer Housing 250mm (extended stock)Weight 1108g

FOR STABLE, COMPACT PERFORMANCE. The Maxim Defense MDX CQB Pistol Brace Lower Receiver delivers mission-ready performance in a compact package. Built from 7075 billet aluminum and finished with a Type III hard coat anodize, this lower is designed for durability and precision in demanding environments. Equipped with the Maxim Defense GEN:6 CQB Pistol Brace and CQB Standard 3.30 oz Buffer System, it collapses to just 5.3” for discreet maneuverability and extends to 10” for stability. Combined with the ALG Combat Trigger, ambidextrous Radian safety selector, ambidextrous Maxim magazine release, and Maxim grip, this lower provides the ideal balance of comfort, control, and adaptability. No buttons to push, just pull the stock to deploy. And with 4 total positions you can adjust for maximum comfort and multiple scenarios. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense CQB Lower Receiver is simply the most thought out, versatile, and durable CQB Pistol Brace on the market. COMPATIBILITY: For Caliber 5.56 / .223 REM / 7,62x39 / .300AAC etc. (The correct buffer weight is a fundamental requirement)Compatible with AR-15 Upper Receivers according to Mil-Spec diametersCompatible with AR-15 bolt carrier groups according to Mil-Spec diametersCompatible with Maxim Defense CQB Buffers onlyCompatible with Maxim Defense CQB Springs only Package Contents: MAXIM DEFENSE MDX CQB Mil-Spec Lower Receiver Complete Key Features: Multi-Caliber MDX 7075 Billet Lower: Precision-machined from 7075 billet aluminum for unmatched strength and rigidity while keeping weight to a minimum.Multi-Cal AR15 Platform: Designed as a multi-caliber AR15 lower receiver for broad compatibility with Mil-Spec uppers.Type III Hard Anodized BlackALG Combat Trigger: Outfitted with the proven ALG Combat Trigger, offering a crisp, consistent pull and reliable reset. Perfect for shooters demanding both speed and accuracy.Radian Selector: Features the premium Radian ambidextrous safety selector, engineered for smooth engagement and positive feedback. Built for high-stress environments where reliability matters most.Maxim Defense Grip: Ergonomically designed to maximize comfort and control during extended shooting sessions. The textured surface ensures a secure grip even in adverse conditions.Maxim Defense Ambidextrous Magazine Release: Enables quick, efficient reloads from either side, enhancing adaptability for all shooters.Maxim Defense GEN6 CQB Pistol Brace: Compact brace collapses to 5.3” and extends to 10”, offering portability and stability in one platform.Ambidextrous QD attachment pointsSafe/Semi/Auto safety selector markingsUS Veteran designed and proudly made in the USA Dimensions: MIN Length from Buffer Housing 150mm (collapsed stock) MAX Length from Buffer Housing 250mm (extended stock)Weight 1108g

A COMPACT POWERHOUSE. For those operating in environments where every inch matters, the Maxim Defense MDX CQB Stock Lower Receiver with the GEN:7 CQB Stock delivers unmatched compact performance. Built from 7075 billet aluminum and Type III Hard Anodized Black, it’s ready for the harshest conditions. Equipped with the Maxim Defense GEN:7 CQB Stock and CQB Standard 3.30 oz Buffer System, it collapses to 5.3” for tight maneuverability and extends to 10” for maximum control. The ALG Combat Trigger, Radian selector, ambidextrous magazine release, and Maxim grip make this lower an exceptional choice for any short or full length rifle build. Match it with your Mil-Spec Upper Receiver or PDX™ Upper Receiver for a precision-engineered, compact powerhouse. No buttons to push, just pull the stock to deploy. The Gen7 is a CQB stock built for comfort and durability for real-world use. At its most collapsed position, this CQB stock only adds 5.35” to your AR15. At full extension, the Maxim CQB stock is the length of an extended carbine stock. And with 4 total positions you can adjust for maximum comfort and multiple scenarios. Rapid deployment, purpose driven materials, and the functionality you need, the Maxim Defense CQB Stock is simply the most thought out, versatile, and durable CQB stock on the market. The Gen7 is for those who want a sleeker profile, eliminating the side sling swivel attachment points from the housing. Instead, the Gen 7 comes with our ambidextrous sling mount already installed. COMPATIBILITY: For Caliber 5.56 / .223 REM / 7,62x39 / .300AAC etc. (The correct buffer weight is a fundamental requirement)Compatible with AR-15 Upper Receivers according to Mil-Spec diametersCompatible with AR-15 bolt carrier groups according to Mil-Spec diametersCompatible with Maxim Defense CQB Buffers onlyCompatible with Maxim Defense CQB Springs only Package Contents: MAXIM DEFENSE MDX CQB Mil-Spec Lower Receiver Complete Key Features: Multi-Caliber MDX 7075 Billet Lower: Precision-machined from 7075 billet aluminum for unmatched strength and rigidity while keeping weight to a minimum.Multi-Cal AR15 Platform: Designed as a true multi-cal platform, it provides maximum compatibility with a wide range of Mil-Spec AR-15 uppers.Type III Hard Anodized BlackALG Combat Trigger: Outfitted with the proven ALG Combat Trigger, offering a crisp, consistent pull and reliable reset. Perfect for shooters demanding both speed and accuracy.Radian Selector: Features the premium Radian ambidextrous safety selector, engineered for smooth engagement and positive feedback. Built for high-stress environments where reliability matters most.Maxim Defense Grip: Ergonomically designed to maximize comfort and control during extended shooting sessions. The textured surface ensures a secure grip even in adverse conditions.Maxim Defense Ambidextrous Magazine Release: Enables quick, efficient reloads from either side, enhancing adaptability for all shooters.Maxim Defense GEN7 CQB Stock: Outfitted with the GEN7 CQB Stock, designed for unmatched portability,  stability and control. Ideal for close-quarters battle where every inch matters.QD attachment point at 6 o’clock position on housingSafe/Semi/Auto safety selector markingsUS Veteran designed and proudly made in the USA Dimensions: MIN Length from Buffer Housing 156mm (collapsed stock) MAX Length from Buffer Housing 270mm (extended stock)Weight 1100g

Bolt Carrier Group for MAXIM DEFENSE SCW™ Stock/Brace Systems. Manganese Phosphate Exterior and Chrome lined inside Carrier. Gas Key is Chrome lined and Heat treated per GI Specifications. These properly hardened parts ensure a strong staking and proper Gas System functioning. Specifications: .223/5.56 NATO/.300 BLK SCW™Auto BCGChrome lined CarrierChrome lined Gas KeyNickel Boron BoltNickel Boron ExtractorNickel Boron Cam PinManganese Phosphated Bolt CarrierChrome Plated Firing PinHeat treated partsHigh Pressure Tested (HPT)Magnetic Particle Inspection (MPI)Superfinished Carrier BodyForward Assist Serrations NOTE: This is NOT a MILSPEC length BCG, and will NOT work with AR-15 Carbine Buffer TubesWill also NOT work with MAXIM DEFENSE CCS or CQB Buffer Tube SystemsSerial number engraving includedC.I.P. NOT includedCompatible accessories see under this article, accessories.

Bolt Carrier for MAXIM DEFENSE SCW™ Stock/Brace Systems. Manganese Phosphate Exterior and Chrome lined inside Carrier. Gas Key is Chrome lined and Heat treated per GI Specifications. These properly hardened parts ensure a strong staking and proper Gas System functioning. Specifications: .223/5.56 NATO/.300 BLK/7,62x39 SCW™Auto BCGChrome lined CarrierChrome lined Gas KeyManganese Phosphated Bolt CarrierHeat treated partsSuperfinished Carrier BodyForward Assist Serrations NOTE: This is NOT a MILSPEC length Bolt Carrier, and will NOT work with AR-15 Carbine Buffer TubesWill also NOT work with MAXIM DEFENSE CCS or CQB Buffer Tube SystemsCompatible accessories see under this article, accessories.

Original Maxim Defense Bolt Spare Parts Kit, make sure your MD is always running top notch. Kit includes: Nickel Boron ExtractorNickel Boron Cam PinChrome Plated Firing PinExtractor spring with bufferExtractor pinExtractor spring O ringEjectorEjector springEjector roll pinFiring Pin Retaining PinGas Ring kit Compatibility: Maxim Defense MD:15™,MDX™, PDX™ and SDX™ firearms in caliber .223/5.56/.300 BLK/7,62x39Compatible accessories see under this article, accessories.