JP ENTERPRISES JP-5™ Lock Piece 60°
189,90 €
Produktinformationen "JP ENTERPRISES JP-5™ Lock Piece 60°"
JP-5™ Lock Piece 60°
What an adjustable gas block is to an AR, the lock piece is to the roller-delayed JP-5™ platform. This easily interchangeable component allows you to tune the recoil impulse of your rifle to suit whatever ammo or configuration you want to run.
Like every part we make, our JP-5™ Lock Pieces are a premium component manufactured from a proprietary steel and finished with a highly lubricious nitride coating for low wear and low friction.
Selecting a Lock Piece For Your JP-5™
Lock pieces for the JP-5™/MP5 pattern operating system are distinguished by the angle of the roller bearing surfaces. Most JP-5™ models will ship with the 80° lock piece. This angle determines how much force is required to open the action. The larger the angle, the easier it is for the action to open. So, systems with higher pressure will take a lower angle of lock piece and vice versa.
If you increase the pressure in your system—e.g., changing to a longer barrel, adding a suppressor, switching to higher pressure ammo—a lower-angled lock piece will function better. If you are decreasing the pressure, a higher-angle lock piece might function better.
In general, if your JP-5™ cycles weakly and unreliably, a higher angle of lock piece is recommended. If the bolt is cycling violently with the SCS bottoming out noticeably in the buffer tube, a lower angle of lock piece will help. Be aware that under-delaying the JP-5™ combined with high-pressure ammo can damage the gun.
In our standard 14.5" barrels, we have found the 80° piece to be the best all-around angle to reliably run low-pressure ammo such as Steel Challenge hand loads or the 130 Federal Syntech while also reducing recoil for high-pressure loads.
Competitive shooters looking to optimize for recoil reduction will opt to move down to a lower angle, typically the 70°. The 70° piece will run any standard pressure loads but will be closer to the edge of the operational window with low pressure loads like the 130 or 150 Federal Syntech or similar low-pressure hand loads. When running the 70° lock piece with such loads, we recommend more regular cleanings of your JP-5™. Several of our top shooters are running this lock piece successfully.
Compatibility
JP-5™ lock pieces are compatible with the H&K MP5 platform but not all MP5 clones. Any non-H&K MP5 clone that takes H&K lock pieces will be compatible with JP-5™ lock pieces.
Because of the precise geometry of the locking surfaces, switching to a new lock piece may alter the bolt gap of a given rifle. Because of this, we recommend validating bolt gap of any rifle after changing out the lock piece.
MADE IN THE USA
Accessory Items
This is the revolution the PCC world has been waiting for. In the world of Pistol Caliber Carbines, JP has become the industry standard with the unmatched reliability and accuracy of our GMR-15™ platform. Never ones to rest on our laurels, we’ve pushed PCC design to the edge with the state-of-the-art JP-5™. This 9mm carbine combines every advantage of its predecessor with the legendary function of the H&K MP5. The result is a PCC that is all things to all shooters. In addition to a lighter overall weight, the roller-delayed operating system of the JP-5™ replicates the supreme recoil management of the MP5. The result is a soft-shooting carbine with radically faster sight recovery and target indexing. As our Team JP shooter Josh Froelich puts it, “The JP-5™ shoots like a .223 not a 9mm carbine.” Combined with the unparalleled reliability our PCCs are known for, the JP-5™ is sure to be the go-to platform for competition, law enforcement and recreation. Utilizing standard Glock 9mm magazines, the JP-5™ lower receiver features ambi. controls and maintains signature AR-15 ergonomics and height-over-bore. The operating system also accepts most MP5 aftermarket components. The JP-5™ is tunable in both the Silent Captured Spring buffer system and lock piece to accommodate suppressed use as well as varying barrel length and ammunition. JP-5™ Features: Proven, unmatched reliability Superior recoil management of the H&K MP5 Faster sight recovery and target indexing Light weight Glock 9mm magazine compatible Steel-reinforced billet receiver set Adjustable/interchangeable lock pieces for custom configuration tuning JP Silent Captured Spring System AR-15 ergonomics and height-over-bore Compatibility with AR-15 stock, grips and accessories Compatibility with multiple MP5 operating system components JP-5™ Competition PCC The JP-5™ Competition PCC is the ultimate Pistol Caliber Carbine for the action shooter. This configuration includes all the features you need to get out and win some matches. Our Competition Series Compensator paired with a polished 14.5” match-grade barrel offers the ultimate in short, quick target transitions. If you’re looking to get into PCC, this is the rifle for you. Our Glock magazine compatible receiver and super-reliable roller-delayed operating system are sure to be dominate the podium in PCC competition this season. Receivers Machined billet JP-5™ G940 receiver set Finish Matte Black Caliber 9mm Barrel 14.5" Supermatch™ | light contour | 1:10 twist Muzzle Competition Series Compensator >>> Barrel Finish Polished stainless | pin/weld to 16" Heat Sink N/A Hand Guard MK III Rapid Configuration | Rifle (12.5” OAL) >>> Charging Handle Radian Raptor top-charge handle Operating System Black 9mm JP-5™ roller-delay Buffer 9mm JP-5™ Silent Captured Spring Trigger 3.5-4.0 lbs. | Curved >>> Stock Hogue Overmolded Carbine >>> Grip Hogue >>> Accessories 9mm accessory pack Length (min.) 31.5 in. Weight 6.1 lbs. Notes N/A Informations: Included C.I.P. Laser markings were carried out covertly AT - Category B with 10 ROUND MAGAZINE Included EXW 10 ROUND MAGAZINE, SHIPPED WITH 33 ROUND ON REQUEST! MADE IN THE USA
This is the revolution the PCC world has been waiting for. In the world of Pistol Caliber Carbines, JP has become the industry standard with the unmatched reliability and accuracy of our GMR-15™ platform. Never ones to rest on our laurels, we’ve pushed PCC design to the edge with the state-of-the-art JP-5™. This 9mm carbine combines every advantage of its predecessor with the legendary function of the H&K MP5. The result is a PCC that is all things to all shooters. In addition to a lighter overall weight, the roller-delayed operating system of the JP-5™ replicates the supreme recoil management of the MP5. The result is a soft-shooting carbine with radically faster sight recovery and target indexing. As our Team JP shooter Josh Froelich puts it, “The JP-5™ shoots like a .223 not a 9mm carbine.” Combined with the unparalleled reliability our PCCs are known for, the JP-5™ is sure to be the go-to platform for competition, law enforcement and recreation. Utilizing standard Glock 9mm magazines, the JP-5™ lower receiver features ambi. controls and maintains signature AR-15 ergonomics and height-over-bore. The operating system also accepts most MP5 aftermarket components. The JP-5™ is tunable in both the Silent Captured Spring buffer system and lock piece to accommodate suppressed use as well as varying barrel length and ammunition. JP-5™ Features: Proven, unmatched reliability Superior recoil management of the H&K MP5 Faster sight recovery and target indexing Light weight Glock 9mm magazine compatible Steel-reinforced billet receiver set Adjustable/interchangeable lock pieces for custom configuration tuning JP Silent Captured Spring System AR-15 ergonomics and height-over-bore Compatibility with AR-15 stock, grips and accessories Compatibility with multiple MP5 operating system components JP-5™ All-Purpose Carbine The JP-5™ All Purpose Carbine is a well-rounded pistol caliber carbine (PCC) option for any application. With a low-profile Teflon® barrel and our tactical compensator, this rifle is equally at home anywhere from recreation to tactical to high-speed PCC competition. Our unmatched JP build quality combined with the roller-delay JP-5™’s 9mm Glock magazine platform means superb performance with one of the most affordable, widely-available ammunition choices there is. Receivers Machined billet JP-5™ G940 receiver set Finish Matte Black Caliber 9mm Barrel 14.5" Supermatch™ | light contour | 1:10 twist Muzzle Tactical Compensator >>> Barrel Finish Black Teflon® | pin/weld to 16" Heat Sink N/A Hand Guard MK III Rapid Configuration | Rifle (12.5” OAL) >>> Charging Handle Radian Raptor top-charge handle Operating System Black 9mm JP-5™ roller-delay Buffer 9mm JP-5™ Silent Captured Spring Trigger 3.5-4.0 lbs. | Curved >>> Stock Hogue Overmolded Carbine >>> Grip Hogue >>> Accessories 9mm accessory pack Length (min.) 31.25 in. Weight 6.0 lbs. Notes N/A Informations: Lenghts: 78,0 - 86,5cm Included C.I.P. Laser markings were carried out covertly AT - Category B with 10 ROUND MAGAZINE Included EXW 10 ROUND MAGAZINE, SHIPPED WITH 33 ROUND ON REQUEST! MADE IN THE USA
This is the revolution the PCC world has been waiting for. In the world of Pistol Caliber Carbines, JP has become the industry standard with the unmatched reliability and accuracy of our GMR-15™ platform. Never ones to rest on our laurels, we’ve pushed PCC design to the edge with the state-of-the-art JP-5™. This 9mm carbine combines every advantage of its predecessor with the legendary function of the H&K MP5. The result is a PCC that is all things to all shooters. In addition to a lighter overall weight, the roller-delayed operating system of the JP-5™ replicates the supreme recoil management of the MP5. The result is a soft-shooting carbine with radically faster sight recovery and target indexing. As our Team JP shooter Josh Froelich puts it, “The JP-5™ shoots like a .223 not a 9mm carbine.” Combined with the unparalleled reliability our PCCs are known for, the JP-5™ is sure to be the go-to platform for competition, law enforcement and recreation. Utilizing standard Glock 9mm magazines, the JP-5™ lower receiver features ambi. controls and maintains signature AR-15 ergonomics and height-over-bore. The operating system also accepts most MP5 aftermarket components. The JP-5™ is tunable in both the Silent Captured Spring buffer system and lock piece to accommodate suppressed use as well as varying barrel length and ammunition. JP-5™ Features: Proven, unmatched reliability Superior recoil management of the H&K MP5 Faster sight recovery and target indexing Light weight Glock 9mm magazine compatible Steel-reinforced billet receiver set Adjustable/interchangeable lock pieces for custom configuration tuning JP Silent Captured Spring System AR-15 ergonomics and height-over-bore Compatibility with AR-15 stock, grips and accessories Compatibility with multiple MP5 operating system components JP-5™ Steel Challenge Carbine Optimized for maximum speed, the JP-5™ Steel Challenge Carbine is the perfect choice for the rapid-indexing of Steel Challenge. We've pulled as much weight as possible out of this model with an MFT minimized buttstock and titanium compensator for a super-lightweight rig. Our Glock-magazine PCCs have proven to be the standard to beat for reliability in the PCC world, and this speed demon of a model pushes the already feather-weight JP-5™ platform as light as it can go. Receivers Machined billet JP-5™ G940 receiver set Finish Matte Black Caliber 9mm Barrel 14.5" Supermatch™ | light contour | 1:10 twist Muzzle Titanium Competition Series Compensator >>> Barrel Finish Polished stainless | pin/weld to 16" Heat Sink N/A Hand Guard M-LOK® Series | Rifle (12.5” OAL) >>> Charging Handle Radian Raptor top-charge handle Operating System Black 9mm JP-5™ roller-delay Buffer 9mm JP-5™ Silent Captured Spring Trigger 3.5-4.0 lbs. | Curved >>> Stock Mission First Tactical BATTLELINK™ Grip Hogue >>> Accessories 9mm accessory pack Length (min.) 31.5 in. Weight 5.7 lbs. Notes N/A Informations: Included C.I.P. Laser markings were carried out covertly AT - Category B with 10 ROUND MAGAZINE Included EXW 10 ROUND MAGAZINE, SHIPPED WITH 33 ROUND ON REQUEST! MADE IN THE USA