MAGPUL MS4® Dual QD Sling GEN 2 - RGR
109,90 €
Produktinformationen "MAGPUL MS4® Dual QD Sling GEN 2 - RGR"
Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.
Compatible accessories see under this article, accessories.
The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Made in U.S.A. and 100% Berry Amendment compliant.
RUGGED POLYMER AND MANY OPTIONS
Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket
Designed for easy, rapid convertibility between one-point and two-point mode
SIMPLE, STRONG, SECURE
Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion
Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment
MADE IN THE USA
Accessory Items
Announcing the Ultralight QD Endplate for AR15/M16 pattern rifles. Weighing only 6.5 grams, the endplate is machined from billet 6061-T6 aluminum with milspec Type III anodized finish and a press-fit Titanium QD sling swivel cup. This combination of materials and finishes is ideal for weight reduction that doesn’t sacrifice durability or performance. Compatible with both milspec and commercial carbine buffer tubes, requires Castle Nut for installation (not included). MADE IN THE USA
The Radian Vertex Trigger was designed with functional ergonomics at the center of the design philosophy. The trigger bow is positioned forward of the traditional bow location, enhancing the shooter’s ability to make a straight-back trigger break, and reducing potential for “left and down” or “right and down” trigger pull. The single stage Vertex Trigger features a crisp, 3.5-4 pound break and short reset. The Vertex Trigger’s bow is constructed from 1144 carbon steel, and the hammer from precision machined S7 shock resistant tool steel. The hammer is then wire-EDM finished in the interface areas. The components are captured in a lightweight aluminum housing. The Vertex Trigger is compatible with the AR15 platform, with a design that prevents pin walkout even when using standard hammer and trigger pins. Compatibility: Compatible with AR-15 lowers, manufactured according to mil-spec Diameter NOT compatible with HECKLER & KOCH and HAENEL models Compatibel accessories, see under this article, accessories MADE IN THE USA
The Radian Vertex-FB Trigger was designed with functional ergonomics at the center of the design philosophy. The trigger bow is positioned forward of the traditional bow location, enhancing the shooter’s ability to make a straight-back trigger break, and reducing potential for “left and down” or “right and down” trigger pull. The single stage Vertex-FB Trigger features a crisp, 3.5-4 pound break and short reset. The Vertex-FB Trigger’s bow is constructed from 1144 carbon steel, and the hammer from precision machined S7 shock resistant tool steel. The hammer is then wire-EDM finished in the interface areas. The components are captured in a lightweight aluminum housing. The Vertex-FB Trigger is compatible with the AR15 platform, with a design that prevents pin walkout even when using standard hammer and trigger pins. Compatibility: Compatible with AR-15 lowers, manufactured according to mil-spec Diameter NOT compatible with HECKLER & KOCH and HAENEL models Compatibel accessories, see under this article, accessories MADE IN THE USA
Premium High-Quality Heavy Duty QD Receiver End Plate, MIL-STD Quality Compatible with all AR-15/AR-10 Lower Receivers according to Mil-Spec. Compatible accessories, see under this article, accessories. Heavy duty design for extreme use Billet machined from 4140 alloy steel No bushings to come loose or spin Anti-rotation QD socket Weight 7 oz. MADE IN THE USA
BCMGUNFIGHTER™ MCMR-SM Quick Detachable Sling Mount, (M-LOK® Compatible*) Low-Profile for increased mobility and decreased "snag" factor Compatible with M-LOK mounting system Fits standard push button, quick detach sling swivel (not included) 8-position (360°), non-rotational locking interface All steel construction Quick detach sling swivel not included. * M-LOK® is a registered trademark of Magpul Industries Corp. Compatible accessories, see under this article, accessories. MADE IN THE USA
The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions. ALLOWS A WIDE RANGE OF MOTION DURABLE STEEL CONSTRUCTION Case hardened and finished with Melonite for extreme resistance to wear and corrosion WORKS WITH MIL-SPEC AND COMM-SPEC CARBINE RECEIVER EXTENSIONS ADJUSTS TO YOUR NEEDS Accepts any push-button QD sling swivel as well as the Magpul QDM MADE IN THE USA
Kompatibles Zubehör, siehe unter diesem Artikel, Zubehör. The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required. Compatible accessories, see under this article, accessories. M-LOK Description and FAQs M-LOK Installation Tips MAG606 M-LOK QD Sling Mount Installation Instructions TECHNICAL SPECIFICATIONS More Information Weight 0.5 oz. Other Specs Length, Max: 1.3 in. Width, Max: 0.6 in. Height, from surface of Hand Guard: 0.4 in. MADE IN THE USA
Set up your rifle for a single or two point sling using our end plate with built in QD swivel mount. This end plate fits all standard AR-15 and AR-10 receivers. Phosphate Coated Quick Detach Sling Swivel Mount Material: Steel Weight: 0.3 ounces 100% American Made MADE IN THE USA
The KNIGHTS ARMAMENT M-LOK Rail with QD Mount is a 3", 4-slot M1913 rail section with an integrated QD sling swivel socket. Compatible to M-LOK slots. Specifications: Material: Steel - High Strenght AluminiumSteel - Aluminium 3” (76mm) long 4 slot section MIL-STD-1913 Picatinny rail Integrated QD sling swivel socket Military Grade Materials Compatible accessories see under this article, accessories. MADE IN THE USA