MAXIM DEFENSE PDX-SCW 5.56 NATO Complete Upper Receiver Group 5.5'' ARID

  The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. HIGH STRENGTH POLYMER VERTICAL GRIP MOUNTS DIRECTLY TO  M-LOK     LOW PROFILE AND LIGHT WEIGHT MAGPUL TSP TEXTURE For positive control in all environments     DESIGNED TO IMPROVE ERGONOMICS AND WEAPON CONTROL MADE IN THE USA

   Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, our M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 3 usable slots with a max overall length of 1.6". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option MIL-SPEC ANODIZED ALUMINUM Cammed T-nuts Recoil / impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips   TECHNICAL SPECIFICATIONS Attachment M-LOK Slots MADE IN THE USA

    Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (5 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.  5 Slots, max overall length of 2.5". MADE IN THE USA

  Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (7 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots, max overall length of 3.3".  MADE IN THE USA

  Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 3 usable slots and a max overall length of 1.6". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option LIGHTWEIGHT REINFORCED POLYMER Cammed T-nuts Recoil / impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA

 Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights and vertical grips. Injection molded from a proprietary reinforced composite for enhanced strength and durability, our M-LOK Polymer Rail Sections are light weight and feature beveled ends to reduce snagging and eliminate sharp corners and edges. Includes all hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends. Includes 5 usable slots and a maximum overall length of 2.5 in. DIRECTLY MOUNTS TO M-LOK COMPATIBLE SYSTEMS Capable of multi-directional mounting Intermediate spacing option RUGGED REINFORCED POLYMER CONSTRUCTION Cammed T-Nuts Built in recoil/impact mitigation lugs   RESOURCES M-LOK FAQs M-LOK TIPS MADE IN THE USA

  Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights and vertical grips. Injection molded from a proprietary reinforced composite for enhanced strength and durability, our M-LOK Polymer Rail Sections are light weight and feature beveled ends to reduce snagging and eliminate sharp corners and edges. Includes all hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends. Includes 7 usable slots and a maximum overall length of 3.3 in. DIRECTLY MOUNTS TO M-LOK COMPATIBLE SYSTEMS Capable of multi-directional mounting Intermediate spacing option RUGGED REINFORCED POLYMER CONSTRUCTION Cammed T-Nuts Built in recoil/impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

  Ein unerlässliches Zubehör für alle AR-15/AR-10 Schusswaffen sowie für alle Selbstladewaffen mit einer One-Point Aufnahme.  Taktischer elastischer One-Point Bungee Sling nach MIL-STD welcher zusätzlich längeneinstellbar und mit einem Schnellverschluss ausgestattet ist. Um diesen Gurt an Ihrer Schusswaffe, welche eine Standard Sling-Swivel-Aufnahme besitzt befestigen zu können, benötigen Sie zusätzlich einen Standard QD- Push Button Sling Swivel, siehe unter diesem Artikel, Zubehör. Optional können ebenso andere Schnittstellen befestigt werden welche eine Mindestbreite von 25mm aufweisen, die Befestigung erfolgt mittels Klettverschluss an der Öse. Material: 1000D Cordura Nylon

  Fully adjustable single point sling for tactical rifles. Clasp type hook is held secure by spring tension. High density elastic material supports up to 150 lbs. •  Tested 150 lb./ 68kg•  25" Adjustable•  Steel clip•  Allows for greater mobility & weight adjustment•  Quick adjustment bungee

  Fully adjustable single point sling for tactical rifles. Clasp type hook is held secure by spring tension. High density elastic material supports up to 150 lbs. •  Tested 150 lb./ 68kg•  25" Adjustable•  Steel clip•  Allows for greater mobility & weight adjustment•  Quick adjustment bungee

  Fully adjustable single point sling for tactical rifles. Clasp type hook is held secure by spring tension. High density elastic material supports up to 150 lbs. •  Tested 150 lb./ 68kg•  25" Adjustable•  Steel clip•  Allows for greater mobility & weight adjustment•  Quick adjustment bungee

  HIGHLIGHTS PDI® - Power Drop In Trigger Significant AR Upgrade 2 lb. Pull MIL-Grade Hammer Strike, No LPS, Ever H&M BLACKNITRIDE+™ Finish Exceptionally Smooth Feel Enhanced Corrosion Protection Polished Look 9mm PCC Blowback Tough Hammer Collision Bumper Disconnector Crash Protection Disconnector Spring Crush Protection BONUS BENEFITS Curved Trigger Bow with a Backbone™ HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further US Patents: 9052149, 9175917, 9696103, 10006733 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Blowback Systems NOT compatible with HECKLER & KOCH and HAENEL Firearms NOT compatible with SIG SAUER MCX Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS PDI® - Power Drop In Trigger Significant AR Upgrade 2 lb. Pull MIL-Grade Hammer Strike, No LPS, Ever Titanium-Carbon-Nitride & H&M BLACKNITRIDE+™ Finishes Exceptionally Smooth Feel Enhanced Corrosion Protection Polished Look 9mm PCC Blowback Tough Hammer Collision Bumper Disconnector Crash Protection Disconnector Spring Crush Protection BONUS BENEFITS Flat Trigger Bow with a Backbone™ HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further US Patents: 9052149, 9175917, 9696103, 10006733 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Blowback Systems NOT compatible with HECKLER & KOCH and HAENEL Firearms NOT compatible with SIG SAUER MCX Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIGHLIGHTS PDI® - Power Drop In Trigger Significant AR Upgrade 2 lb. Pull MIL-Grade Hammer Strike, No LPS, Ever Titanium-Nitride & H&M BLACKNITRIDE+™ Finishes Exceptionally Smooth Feel Enhanced Corrosion Protection Polished Look 9mm PCC Blowback Tough Hammer Collision Bumper Disconnector Crash Protection Disconnector Spring Crush Protection BONUS BENEFITS Flat Trigger Bow with a Backbone™ HIPERSHOE® Finger Pad Revolution™ Changes the Trigger Lever Length for Fine Weight Adjustment Changes the Trigger Lever Length to Further Adjust Pre-Travel Position Your Finger in the Same Place Every Time Reduces the Perception of Trigger Weight Still Further US Patents: 9052149, 9175917, 9696103, 10006733 Standard Benefits Semi-Auto Single-Stage Crisp, Clean, Trigger Break Very Short Over-Travel Very, Positive Reset You Can Feel and Hear COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Blowback Systems NOT compatible with HECKLER & KOCH and HAENEL Firearms NOT compatible with SIG SAUER MCX Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-1 design has a longer first stage than MOD-2 or MOD-3 for a more defined first stage prep, but shares the same curved bow and Maganese Phosphate coating as the MOD-2 design. HIGHLIGHTS Two-stage AR trigger Short, user adjustable, 2 - 2 1/2 pound first stage Minimal second stage wall with a 1 1/2 pound weight Total 3 1/2 - 4 pound pull with green or red springs respectively Distinct wall between first and second stages allows for effective "prepping" of the trigger for added control Clean, effortless break Weightless, imperceptible over-travel FEATURES Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy Soft Start Lock-Up aids in eliminating rifle "flinch" after the break for more accurate shots at distance Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes Tactile Weightless Break means there is no mushy over-travel after the break Curved trigger bow allows for the addition of our patented HIPERSHOE  First stage slightly longer than its MOD-2 and MOD-3 counterparts for a more defined first stage "prep" As with all of our products, our new X2S family of triggers are proudly made here in the United States, and protected by US patent. See our legal disclosures page for more information.Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX) Trigger Type: Two-Stage, Semi-Drop-In 1st Stage: Short, 2-2 1/2 pound pull with green or red springs respectively 2nd Stage: Minimal "wall", +1 1/2 pounds with either green or red springs Total Pull Weight: 3 1/2 - 4 pounds with green or red springs respectively User Adjustable: Yes Trigger Bow: Curved, HIPERSHOE available Finish: Black, Heavy Maganese Phosphate (mil-grade parkerizing) COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Systems Compatible with SIG SAUER MPX Firearms NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-2 design has a shorter first stage than MOD-1 for a faster first stage prep. It shares the same sear geometry and performance as its MOD-3 counterpart, but has a curved trigger bow and a standard Maganese Phosphate coating. HIGHLIGHTS Two-stage AR trigger Minimal, user adjustable, 2 - 3 pound first stage Minimal second stage wall with a 1 1/2 pound weight Total 3 1/2 - 4 1/2 pound pull with green or red springs respectively Distinct wall between first and second stages allows for effective "prepping" of the trigger for added control Clean, effortless break Weightless, imperceptible over-travel FEATURES Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy Soft Start Lock-Up aids in eliminating rifle "flinch" after the break for more accurate shots at distance Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes Tactile Weightless Break means there is no mushy over-travel after the break Curved trigger bow allows for the addition of our patented HIPERSHOE (sold separately here) First stage slightly shorter than the MOD-1 design Same sear design as its MOD-3 counterpart, but curved trigger bow with standard Maganese Phosphate coating As with all of our products, our new X2S family of triggers are proudly made here in the United States, and protected by US patent. See our legal disclosures page for more information. Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX) Trigger Type: Two-Stage, Semi-Drop-In 1st Stage: Minimal, 2 - 3 pound pull with green or red springs respectively 2nd Stage: Minimal "wall", +1 1/2 pounds with either green or red springs Total Pull Weight: 3 1/2 - 4 1/2 pounds with green or red springs respectively User Adjustable: Yes Trigger Bow: Curved, HIPERSHOE available Finish: Black, Heavy Maganese Phosphate (mil-grade parkerizing) COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Systems Compatible with SIG SAUER MPX Firearms NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-3 design has a shorter first stage than MOD-1 for a faster first stage prep. It shares the same sear geometry and performance as its MOD-2 counterpart, but has a flat trigger bow with our patented HIPERSHOE® and an upgraded Black Nitride coating. This trigger can be used with or without the included HIPERSHOE. HIGHLIGHTS Two-stage AR trigger Minimal, user adjustable, 2 - 3 pound first stage Minimal second stage wall with a 1 1/2 pound weight Total 3 1/2 - 4 1/2 pound pull with green or red springs respectively Distinct wall between first and second stages allows for effective "prepping" of the trigger for added control Clean, effortless break Weightless, imperceptible over-travel FEATURES Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy Soft Start Lock-Up aids in eliminating rifle "flinch" after the break for more accurate shots at distance Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes Tactile Weightless Break means there is no mushy over-travel after the break Flat trigger bow HIPERSHOE finger pad reduces the perceived trigger pull weight for a lighter feel First stage slightly shorter than the MOD-1 design Same sear design as its MOD-2 counterpart, but a flat trigger bow with upgraded Black Nitride coating As with all of our products, our new X2S family of triggers are proudly made here in the United States, and protected by US patent. See our legal disclosures page for more information.Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX) Trigger Type: Two-Stage, Semi-Drop-In 1st Stage: Minimal, 2 - 3 pound pull with green or red springs respectively 2nd Stage: Minimal "wall", +1 1/2 pounds with either green or red springs Total Pull Weight: 3 1/2 - 4 1/2 pounds with green or red springs respectively User Adjustable: Yes Trigger Bow: Flat with HIPERSHOE included Finish: Black Nitride COMPATIBILITY / NOTICE Compatible with milled and forged AR-15/AR-10 receivers manufactured to Mil-Spec diameter Compatible with AR-15 9mm Systems Compatible with SIG SAUER MPX Firearms NOT compatible with HECKLER & KOCH and HAENEL Firearms Installation may only be carried out by qualified persons Compatible accessories see under this article, accessories MADE IN THE USA

  Born from the SOCOM PDW solicitation, the NEW Maxim Defense PDX™ is designed to handle the fierce demands of the Tier 1 community. The PDX™ dominates close-quarter encounters and achieves maximum energy on target. At just 471mm in overall length, the PDX™ delivers groundbreaking power and performance in a subcompact platform. At the heart of the PDX™ is our Maxim SCW™ system. This patent-pending system cuts down the length of the stock to 4″. The integrated BCG with interchangeable buffer weights gives you maximum performance and versatility without sacrificing form and functionality. The PDX uses a Direct Impingement system. The PDX™ comes equipped with Maxim’s HATEBRAKE™ muzzle booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses, and concussion wave downrange away from the operator, and improves overall performance. FEATURES: MAXIM DEFENSE Hatebrake™ MAXIM DEFENSE SCW™ Stock System MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE Ambidextrous Magazine Release MAXIM DEFENSE QD Interface Multipoint Steel Receiver Endplate  MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle RADIAN Talon® Ambidextrous Safety Selector ALG DEFENSE Combat Trigger Ambidextrous Handguard QD Steel Interfaces Ambidextrous Safe/Semi/Auto Safety Selector Markings Enhanced Takedown and Pivot Pins M-LOK® compatible Handguard Internal Suppressor Compatibility Last round hold open function Lightweight Upper and Lower Receiver Rapid deployment – no buttons to push Extended cheek weld Military grade materials Fully floated barrel Shortest overall length of any PDW FUNCTIONS: Proprietary integrated buffer-carrier with MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD, LANCER etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : .300 Blackout / .300 AAC Barrel Thread Pitch :5/8-24 UNEF SCW™ H1 Buffer Material Compisition : 7075 Aluminum & Tool Steel Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing Black Barrel Length : 5.5” [139.7mm] Overall Length : [471mm] (collapsed stock) - [594mm] (extended stock) Maximum Suppressor Diameter: 43mm Weight : 2752g SCW Stock Dimensions 4.0 inches 1st position (closed) 5.25 inches 2nd position 6.5 inches 3rd position 7.75 inches 4th position 8.75 inches 5th position (extended) INFORMATIONS EXW 20-ROUND MAGAZINE AT - Category B with 20 round Magazine Including C.I.P.  Laser markings were carried out covertly Compatible suppressors and accessories see under this article, accessories MADE IN THE USA

  Born from the SOCOM PDW solicitation, the NEW Maxim Defense PDX™ is designed to handle the fierce demands of the Tier 1 community. The PDX™ dominates close-quarter encounters and achieves maximum energy on target. At just 471mm in overall length, the PDX™ delivers groundbreaking power and performance in a subcompact platform. At the heart of the PDX™ is our Maxim SCW™ system. This patent-pending system cuts down the length of the stock to 4″. The integrated BCG with interchangeable buffer weights gives you maximum performance and versatility without sacrificing form and functionality. The PDX uses a Direct Impingement system. The PDX™ comes equipped with Maxim’s HATEBRAKE™ muzzle booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses, and concussion wave downrange away from the operator, and improves overall performance. FEATURES: MAXIM DEFENSE Hatebrake™ MAXIM DEFENSE SCW™ Stock System MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE Ambidextrous Magazine Release MAXIM DEFENSE QD Interface Multipoint Steel Receiver Endplate  MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle RADIAN Talon® Ambidextrous Safety Selector ALG DEFENSE Combat Trigger Ambidextrous Handguard QD Steel Interfaces Ambidextrous Safe/Semi/Auto Safety Selector Markings Enhanced Takedown and Pivot Pins M-LOK® compatible Handguard Internal Suppressor Compatibility Last round hold open function Lightweight Upper and Lower Receiver Rapid deployment – no buttons to push Extended cheek weld Military grade materials Fully floated barrel Shortest overall length of any PDW FUNCTIONS: Proprietary integrated buffer-carrier with MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD, LANCER etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : 7,62x39 Barrel Thread Pitch :5/8-24 UNEF SCW™ H3 Buffer Material Compisition : 7075 Aluminum & Tool Steel Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing Black Barrel Length : 5.5” [139.7mm] Overall Length : [471mm] (collapsed stock) - [594mm] (extended stock) Maximum Suppressor Diameter: 43mm Weight : 2752g SCW Stock Dimensions 4.0 inches 1st position (closed) 5.25 inches 2nd position 6.5 inches 3rd position 7.75 inches 4th position 8.75 inches 5th position (extended) INFORMATIONS EXW 20-ROUND MAGAZINE AT - Category B with 20 round Magazine or shorter Including C.I.P.  Laser markings were carried out covertly Compatible suppressors and accessories see under this article, accessorie MADE IN THE USA

  Born from the SOCOM PDW solicitation, the NEW Maxim Defense PDX™ is designed to handle the fierce demands of the Tier 1 community. The PDX™ dominates close-quarter encounters and achieves maximum energy on target. At just 471mm in overall length, the PDX™ delivers groundbreaking power and performance in a subcompact platform. At the heart of the PDX™ is our Maxim SCW™ system. This patent-pending system cuts down the length of the stock to 4″. The integrated BCG with interchangeable buffer weights gives you maximum performance and versatility without sacrificing form and functionality. The PDX uses a Direct Impingement system. The PDX™ comes equipped with Maxim’s HATEBRAKE™ muzzle booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses, and concussion wave downrange away from the operator, and improves overall performance. FEATURES: MAXIM DEFENSE Hatebrake™ MAXIM DEFENSE SCW™ Brace System MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE Ambidextrous Magazine Release MAXIM DEFENSE QD Interface Multipoint Steel Receiver Endplate  MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle RADIAN Talon® Ambidextrous Safety Selector ALG DEFENSE Combat Trigger Ambidextrous Handguard QD Steel Interfaces Ambidextrous Safe/Semi/Auto Safety Selector Markings Enhanced Takedown and Pivot Pins M-LOK® compatible Handguard Internal Suppressor Compatibility Last round hold open function Lightweight Upper and Lower Receiver Rapid deployment – no buttons to push Extended cheek weld Military grade materials Fully floated barrel Shortest overall length of any PDW FUNCTIONS: Proprietary integrated buffer-carrier with MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD, LANCER etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : 7,62x39 Barrel Thread Pitch :5/8-24 UNEF SCW™ H3 Buffer Material Compisition : 7075 Aluminum & Tool Steel Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing Black Barrel Length : 5.5” [139.7mm] Overall Length : [474mm] (collapsed stock) - [595mm] (extended stock) Maximum Suppressor Diameter: 43mm Weight : 2746g SCW Brace Dimensions 4.0 inches 1st position (closed) 5.25 inches 2nd position 6.5 inches 3rd position 7.75 inches 4th position 8.75 inches 5th position (extended) INFORMATIONS EXW 20-ROUND MAGAZINE AT - Category B with 20 round Magazine or shorter Including C.I.P.  Laser markings were carried out covertly Compatible suppressors and accessories see under this article, accessories MADE IN THE USA

  Born from the SOCOM PDW solicitation, the NEW Maxim Defense PDX™ is designed to handle the fierce demands of the Tier 1 community. The PDX™ dominates close-quarter encounters and achieves maximum energy on target. At just 471mm in overall length, the PDX™ delivers groundbreaking power and performance in a subcompact platform. At the heart of the PDX™ is our Maxim SCW™ system. This patent-pending system cuts down the length of the stock to 4″. The integrated BCG with interchangeable buffer weights gives you maximum performance and versatility without sacrificing form and functionality. The PDX uses a Direct Impingement system. The PDX™ comes equipped with Maxim’s HATEBRAKE™ muzzle booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses, and concussion wave downrange away from the operator, and improves overall performance. FEATURES: MAXIM DEFENSE Hatebrake™ MAXIM DEFENSE SCW™ Stock System MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE Ambidextrous Magazine Release MAXIM DEFENSE QD Interface Multipoint Steel Receiver Endplate  MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle RADIAN Talon® Ambidextrous Safety Selector ALG DEFENSE Combat Trigger Ambidextrous Handguard QD Steel Interfaces Ambidextrous Safe/Semi/Auto Safety Selector Markings Enhanced Takedown and Pivot Pins M-LOK® compatible Handguard Internal Suppressor Compatibility Last round hold open function Lightweight Upper and Lower Receiver Rapid deployment – no buttons to push Extended cheek weld Military grade materials Fully floated barrel Shortest overall length of any PDW FUNCTIONS: Proprietary integrated buffer-carrier with MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD, LANCER etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : .300 Blackout / .300 AAC Barrel Thread Pitch :5/8-24 UNEF SCW™ H1 Buffer Material Compisition : 7075 Aluminum & Tool Steel Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing ARID Barrel Length : 5.5” [139.7mm] Overall Length : [471mm] (collapsed stock) - [594mm] (extended stock) Maximum Suppressor Diameter: 43mm Weight : 2752g SCW Stock Dimensions 4.0 inches 1st position (closed) 5.25 inches 2nd position 6.5 inches 3rd position 7.75 inches 4th position 8.75 inches 5th position (extended) INFORMATIONS EXW 10 round magazine AT - Category B with 20 round magazine AT - Category  A with 30 round magazine SHIPPING WITH 30 ROUND MAGAZINE ON REQUEST! Including C.I.P. Compatible suppressors and accessories see under this article, accessoriesMADE IN THE USA