MOSSBERG MVP® LR 6.5 CREEDMOOR 22''

  Rifle bolt holster to keep the Bolt Safe and Clean. Bolt holster to accept just about any rifle bolt keeping it secure, and also clean. Suitable for most rifle bolts. Features a MALICE clip belt loop. Made from MILSPEC durable laminate fabric MOLLE/PALS compatible Cole-TAC ist ein taktischer Zubehörhersteller aus Lettland, welcher im Jahr 2015 gegründet wurde und sich zum Ziel gesetzt hat Ausrüstung für Spezialeinheiten und Schützen zu entwickeln, welche von ihrer Ausrüstung Perfektion erwarten. Jeder Artikel wird von Hand gefertigt und von dem jeweiligen Mitarbeiter persönlich abgezeichnet. Information: Symbolfoto

  Der Sonic™ 40 Compact M8 ist ein subkompakter 40mm Over-Barrel Schalldämpfer mit sehr guter Leistung und wurde speziell für das Kaliber .300 BLACKOUT entwickelt. Durch den patentierten Edelstahleinsatz hält er hohen Temperaturen bei schnellen Schussfolgen stand und ist somit auch bestens geeignet für halbautomatische Schusswaffen. Zur Leistungssteigerung sind zusätzliche Expansion Module optional erhältlich, ausserdem sind unterschiedliche Gewindemodule (Rear Parts) in allen gängigen Gewindenormen verfügbar um den Wechsel bei Gewehren im selben Kaliber kostengünstig und einfach zu gestalten. Details/Angebotsumfang: Ø 40 mm Anschlussgewinde 5/8-24 UNEF Gewicht: ca. 300 Gramm Länge: 192 mm Laufverlängerung: ca. 117 mm Maximaler Laufdurchmesser: 23mm Schallreduktion:  26-33 dB, abhängig von Kaliber, Munition, Lauflänge sowie Anzahl von Expansionsmodulen  Material: Aluminium, Edelstahl Oberfläche: Harteloxal Lieferumfang 5 Expansionsmodule, erweiterbar bis max. 10 Expansionsmodule Anwendung: Repetierbüchsen, Halbautomaten Kompatibles und empfohlenes Zubehör, siehe unter diesem Artikel, Zubehör.  Optimale Pflege & Instandhaltung: Vor einer Verwendung sprühen Sie etwas WD40 oder ähnliches am hinteren Ende des Schalldämpfers hinein, vor allem wenn der Schalldämpfer bei feuchtem Wetter verwendet wird. Nach der Verwendung lassen Sie den Schalldämpfer stehend trocknen, bevor Sie eine Einlagerung durchführen. Reinigen Sie den Schalldämpfer bei Bedarf nur mit Öl und mit einem weichen Tuch, vermeiden Sie die Verwendung von alkalischen oder aggressiven Reinigern, Ultraschallreinigern oder metallischen Bürsten, eine regelmäßige Reinigung verhindert hartnäckige Ablagerungen. Soll der Schalldämpfer voll zerlegbar bleiben, empfiehlt es sich regelmäßig alle Module zu trennen und neues NIELSEN Sonic Suppressor Grease an jedem Gewinde aufzutragen. Sollte ein Modul festsitzen, verwenden Sie einfach das Zerlegewerkzeug des Herstellers (C-Spanner SET), welches optional erhältlich ist.   MADE IN DENMARK

  ASC Stainless Steel magazines are an improvement on a classic, with the highest levels of durability and increased longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020” gauge 410 Stainless Steel Alloy and heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance. Kompatibel zu allen AR-10 Hersteller mit SR-25 Aufnahme sowie zu Schusswaffen mit baugleicher Aufnahme im Kaliber .308 WIN / 7.62 / 6.5 CM  MADE IN THE USA Available Coatings: Black  Available Follower: Black Assembly Components: 410 Series Stainless Steel Body, Heat Treated Chrome Silicon Springs Enhanced Anti-tilt Polymer Followers with PTFE 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

  The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles in the smallest possible magazine size. It features true 10-round capability and includes a constant-curve body, a high-quality stainless steel spring, a self-lubricating anti-tilt follower, and a snap on impact / dust cover. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance. Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830" OAL. Perfect for use with a bipod or when shooting off of a pack. MADE IN THE USA

  Hard-hitting calibers demand serious magazines. DURAMAG SS® SR25 pattern mags are made from a single piece of laser-welded 410 Stainless Steel and protected with T-360®- applied coating. This is a magazine that can truly withstand the test of time, and hard use. C Products Defense took great care to design this magazine to be the best option for precision shooters but also for heavy full-auto use. Precision shooters will enjoy a a beautiful COAL of 2.87" for their long-range shooting while knowing that their magazine will also feed as fast as needed, every time. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Controlled-tilt AGF follower  Compatible with AR-10 models in caliber 7.62 NATO / .308 WIN / 6.5 CREEDMOOR / 6.8x51 Compatible with ARMALITE AR-10® A-SERIES, KNIGHTS ARMAMENT, ROBINSON ARMAMENT, MOSSBERG MVP®, RUGER RPR etc. MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  The 5.56/.223/.300BLK DURAMAG SS™ is designed for serious shooters who require the most out of their magazines so when performance and durability are paramount, make the switch to DURAMAG SS™ and never look back. These are the ultimate magazine of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. Constructed from premium 410 Stainless Steel for maximum durability. This material, coupled with advanced interior and exterior geometries, ensure ultimate reliability and feeding. DURAMAG™ will not flex or swell like polymer and are safe for extended storage while loaded without any add ons. These magazines utilize our T-360™ coating to ensure not only incredibly smooth performance and ease of loading, but also product longevity through the harshest conditions. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 20 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 20 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - Black T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 30 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - Bronze T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  DURAMAG Speed™ magazines are a truly improved USGI magazine. These battle-proven magazines are lightweight, durable and have been the magazine of choice for OEM, Law Enforcement and Military units throughout the world since we began producing in 2011. These magazine is also the ultimate of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. DURAMAG Speed™ bodies are constructed of 6061-T6 aluminum and are Mil-Spec type-III hard-coat anodized. Unlike other magazines that use inferior coatings to color their USGI style magazines, our wide range of colors are part of the anodizing process and thus, a part of the metal. These magazines and are safe for extended storage while loaded and will not flex or swell like polymer. With our Progressive die tooling, Post and Hole™ design, and fully robotic welding, you can truly depend on these magazines to be consistent every time you buy them, guaranteed. Specifications: Capacity: 30 round Material: 6061-T6 Aluminum Everflex™ Spring Mil-Spec Type-III hard-coat anodized - Desert Gold T-360™ total coating technology Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015. Information:  Military/Law Enforcement Program on request

  Kompatibel zu allen Sonic™ 40 M8 Modellen. Kompatible Modelle sowie optionales Zubehör, siehe unter diesem Artikel, Zubehör.  MADE IN DENMARK

  Hochwertiger Sling Swivel, kompatibel zu allen Riemenösen an allen gängigen US Schusswaffen. Details/Produktinformationen: für 8 mm Kopfbreite Stift-ø 3,5 mm Ausführung Stahl brüniert Maximale Abmessungen Riemen: 21,0 x 4,5mm

  Kompatibel zu allen AR-10 Hersteller mit SR-25 Aufnahme sowie zu Schusswaffen mit baugleicher Aufnahme im Kaliber .308 WIN / 7.62 / 6.5 CM  The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover. Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding. Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.MADE IN THE USA