Optik Zubehör

  Enhance Your Mossberg 940 JM PRO With American Made GG&G Accessories!  This GG&G Low Profile Red Dot Mount For the RMR was Designed, Manufactured and Tested 12ga Shotguns. This Scope Base Fits The RMR And Approximately 20 Other Red Dot Optics With A Similar Footprint. Be Advised!  Attachment Screw Lengths Vary. Longer screws may damage the top of your shotgun! IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Mossberg 940 Pro Tactical RMR  Red Dot Scope Mount. A fitment list is provided in the Specification section below. NOTE: Please be advised that the screws that are included with the GG&G Red Dot Mount are specific to mounting the RMR and may be too long for mounting other red dot optics. For example three Holosun Mini Red Dot Scopes, models 407, 507 and 508 have the same attachment screw layout as the Trijicon RMR. However, BE ADVISED: The screws that come with the GG&G Mossberg 940 Pro Tactical RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver! NOTE: Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR!  PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR. Mossberg 940 PRO Tactical Red Dot Scope Mount For RMR: Red Dot Optics like the Trijicon RMR are a great addition to the Mossberg PRO Tactical Shotgun. The GG&G Mossberg 940 Pro Low Profile Red Dot Optic Mount has the RMR fitment or attachment layout. Besides the Trijicon RMR, the 940 Pro Red Dot Scope Base fits approximately 20 other red dot optics, but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic. The Mossberg 940 Pro Tactical Red Dot RMR Mount is a solid low profile mount. Accurately CNC machined to precise tolerances. The RMR Mount has a rock solid engagement with the top of the 940 Pro receiver and the red dot optic. The Red Dot Scope Mount for the 940 Pro Tactical mated with the RMR Red Dot Scope, provides an accurate quick target acquisition package. Mossberg 940 PRO Tactical Red Dot Scope Mount Specifications: Does not require any modifications to your Mossberg 940 Pro except the possible removal of the standard dovetail scope mount. The Mossberg 940 Red Dot Scope Mount For The RMR is easy to install using factory drilled and tapped mounting holes. Will also fit the Mossberg 940 Pro Tactical SPX Model. Includes mounting hardware for the 940 Pro Tactical Scope Mount and hardware specifically for mounting the Trijicon RMR to the scope mount. Hex key wrenches are included.All edges are deburred for the shooter's safety. Rounded edges provide a snag free operation. Material: The Mossberg 940 Pro RMR Red Dot Scope Mount is manufactured from 6061-T6 aluminum. Length: 1.800" Width: 1.100" Thickness: .210" Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements. Weight: 0.5 oz. Made in America By Men And Women Proud To Be Americans! Compatible Red Dots see under this article, accessories Compatibility: The Mossberg Red Dot Scope base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic. Mossberg 940 Pro Tactical Low Profile Red Dot Mount Fitment List: ZEROTECH Thrive HD / Trijicon RMR / Trijicon SRO / Holosun 407C / Holosun 407C V2 / Holosun 407C X2 / Holosun 507C / Holosun 507C V2 / Holosun 507C X2 / Holosun 508T / Holosun 508T X2 /Riton X3 Tactix PRD/ NcStar VISM FlipDot Pro / ADE Advanced Optics RD3-020 Raptor / ADE Advanced Optics RD3-023 Valkyrie / Swampox Kingslayer 1x22 / Swampfox Liberty RMR 1x22 / Swampfox Justice RMR 1x27 / Vector Optics Frenzy 1x22x26.

  The Accucam QD System for the EOTech XPS Series we provide to civilian, law enforcement and military users . The patented GG&G Accucam QD Mounting System is still the only QD lever system available today that does not add height to the EOTech optics, while maintaining proper cheek weld and fast co-witnessing. SPECS: The Accucam QD Locking Lever System For The EOTech XPS2-0 and EOTech XPS3-0 replaces the EOTech socket head screw or thumbnut attachment method. It basically retrofits directly to the body of the EOTech XPS Scope. Easily installs in under ten minutes and we include the tools required in the kit. It is fully adjustable to fit Weaver and MIL-STD-1913 dovetails and easily adjusts as needed for worn and out-of-spec rails. Once installed, the optic can be quickly installed or removed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked or unlocked position. The Accucam QD Locking Lever System has been shown to be repeatable to less than 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand, and is virtually snag proof. All hard edges have been deburred and softened for the shooter's safety. This system is not recommended for .50 BMG or lightweight machine guns. Material: The rugged GG&G XPS Accucam Locking Lever System is manufactured from solid billet 4140 steel. Finish: manganese phosphated matte black per Mil-Spec. Weight: 2 ozs. Made In America By Men and Women Proud To Be Americans!

   When in a crouching, sitting or prone position the shooter tends to "creep" up on the scope. In order to provide the shooter with the ability to gain more eye relief when in these positions, GG&G has introduced the AC-30 Accucam QD Mounting Base With Integral 30mm Scope Rings. This new mounting base is tall enough to provide clearance for the latest large objective lens-long range optics. The integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 MOA repeatability upon reinstallation. SPECS: Quick detachable. Easily adapts for proper eye relief. Ideal for long bodied scopes. Ring size fits 30mm scope tubes. 1 inch ring reducers are available. Height: Centerline of the integral ring to the top of the dovetail is 1.460”. The inside ring to ring spacing dimension is 3 3/4 inches. Mounting base is 4 inches in length with dual recoil lugs. Dehorned to protect the operator. Fully adjustable to fit worn or out of spec Mil-Std-1913 rails. Accucam is repeatable to ½ moa or less Easy operating finger loop design. Materials: Manufactured from 6061-T6 solid billet aluminum and solid billet 4140 steel. Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability. Finish: All steel components are manganese phosphated in a non-reflective black finish per Mil-Spec. Weight: 6 oz. Made In America By Men And Women Proud To Be Americans!

  The GG&G one piece Mossberg 930 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Mossberg 930 shotgun. SPECS: Low profile design. MIL-STD-1913 configuration. Perfect for mounting a tactical scope to your Mossberg 930 shotgun. Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads. Attaches with four steel Torx head screws. Torx wrench is included. Precision machined from 6061-T6 billet aluminum. All edges are smoothed and rounded for the shooter's safety. Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec. Length: 5.9" long. Weight: 1.2 oz. Optic not included Made In America By Men And Women Proud To Be Americans!

  Dieses Picatinnyrail mit integriertem Spacer (ScopeLink™) ist kompatibel zu AUDERE Adversus™ Blockmontagen und AUDERE Adversus™ Ringmontagen. AUDERE ist ein Hersteller von Schusswaffenzubehör der 2016 gegründet wurde. Dieser entwickelt und produziert eigenständig auf modernsten CNC-Maschinen taktische Ausrüstungen und Zubehör für Small Arms von höchster Qualität und hat ein breites Spektrum von Anwendern aus Militär, Law Enforcement sowie für den Schießsport und die Jagd. Das Entwicklungsteam besteht aus aktiven Schützen mit unterschiedlichem Hintergrund und Waffenwissen. Modernste technische Fertigungs- und Qualitätssicherungsverfahren stellen sicher, dass diese Produkte die höchsten Industriestandards übertreffen. Alle Zielfernrohrmontagen von AUDERE werden auf modernsten 5- Achsen Fräsmaschinen der letzten Generation aus einem hochfestem 7075 Aluminium Block gefräst und sind Typ 3 Hard Coat anodisiert und gewähren höchsten Korrosionsschutz und höchste Abriebfestigkeit. Zusätzlich sind alle AUDERE Montagen mit allen MIL-STD-1913, 22mm Picatinny und Weaverschienen kompatibel und besitzen eine griffige Oberflächentextur in den Ringen, somit werden keinerlei Einlagen oder diverse Klebstoffe benötigt. Weiters sind alle Klemmelemente mit gehärteten Torx-Schrauben ausgerüstet und sorgen so für optimalen Halt.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Leupold Delta Point Pro, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Leupold Delta Point Pro THEN YOUR SIGHTS ARE: Optics Ready Stealth 469-494 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models. Optics that fit this plate: Zerotech: Thrive HDHolosun: 407c, 507c, 507Comp, 508tTrijicon: RMR Type 2, RMR HD, SROGideon Optics: Granite RMR FootprintSwampfox: Liberty/JusticeCompatible Reflex sights and accessories see under this article, accessoriesSee Pairing Guide for all optic compatibilitySpecifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Zerotech Thrive HD, Holosun 507c/407c/Comp, Trijicon RMR Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witness IF YOU HAVE: Trijicon RMRHD, Trijicon SRO Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 358-381 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun 509t, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 509t THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun EPS, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Aimpoint Acro P-2, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Aimpoint Acro P-2 THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun EPS Carry, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS Carry THEN YOUR SIGHTS ARE: Optics Ready Stealth 220-227 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun 507k, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 507k THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  1mm / .039" Fluorescent Fiber use for all TTI sights. Fiber glows at ends by light reflecting from side of fiber. 1-2 inches.MADE IN THE USA

  Work on MOS version and aftermarket Optic cut slides Comes in sets of 2 pcs Thread: 6-32  Length: 3/8 '' / 9,52 mm T15 Torx head Material: TitanMADE IN THE USA

Polymer Low Profile Backup Front Sight with standard iron sight elevation adjustment mounts onto a 1913 Picatinny Rail. Will accept any standard front post blade. Standard front sight tool is required with each click equaling the standard 1/4 MOA. Unlike other backup sights MFT has developed a shroud that shelters the front post blade from debris and impact damage when not deployed. A slim profile allows the sight to sit under most optics. Specifications: NSN: 1005226368134Full Elevation adjustment, tool requiredLow profile snag resistant designShroud protects front post blade from debris and impact damageAccepts any standard front post bladeCan fold to the rear, the correct direction if droppedManufactured using a specially developed Military Grade reinforced, super tough polyamideRail clamp nut has been redesigned so that there is no spin out when overtightenedAll plastic components have been changed to a higher strength material.Retaining pin for the cover has been redesigned so that the pin does not slip out of position.Metal front sight postWeight: .5ozHeight: .879"Width: 1.08"Length: 2.23" O.A. /.6 from top of railMADE IN THE USA

Polymer Low Profile Backup Front Sight with standard iron sight elevation adjustment mounts onto a 1913 Picatinny Rail. Will accept any standard front post blade. Standard front sight tool is required with each click equaling the standard 1/4 MOA. Unlike other backup sights MFT has developed a shroud that shelters the front post blade from debris and impact damage when not deployed. A slim profile allows the sight to sit under most optics. Specifications:NSN: 1005226368135Full Elevation adjustment, tool requiredLow profile snag resistant designShroud protects front post blade from debris and impact damageAccepts any standard front post bladeCan fold to the rear, the correct direction if droppedManufactured using a specially developed Military Grade reinforced, super tough polyamideRail clamp nut has been redesigned so that there is no spin out when overtightenedAll plastic components have been changed to a higher strength material.Retaining pin for the cover has been redesigned so that the pin does not slip out of position.Metal front sight postWeight: .5ozHeight: .879"Width: 1.08"Length: 2.23" O.A. /.6 from top of railMADE IN THE USA

Polymer Low Profile Backup Rear Sight with Windage Adjustment mounts onto a 1913 Picatinny Rail. A flat head screw driver is required to adjust an Infinite MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Specifications: NSN: 1005226368139Low profile snag resistant designShroud protects aperture from debris and impact damageDual peep, same plane aperture allows for perfect co-witnessUnique closure with either aperture deployedCan fold to the rear, the correct direction if droppedSight works in conjunction with all standard height front sightsManufactured using a specially developed Military Grade reinforced, super tough polyamideRail clamp nut has been redesigned so that there is no spin out when overtightenedAll plastic components have been changed to a higher strength material.Retaining pin for the cover has been redesigned so that the pin does not slip out of position.Weight: .5ozHeight: .879"Width: 1.08"Length: 2.23" O.A. /.6" from top of railMADE IN THE USA

Polymer Low Profile Backup Rear Sight with Windage Adjustment mounts onto a 1913 Picatinny Rail. A flat head screw driver is required to adjust an Infinite MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Specifications:NSN: 1005226368142 Low profile snag resistant designShroud protects aperture from debris and impact damageDual peep, same plane aperture allows for perfect co-witnessUnique closure with either aperture deployedCan fold to the rear, the correct direction if droppedSight works in conjunction with all standard height front sightsManufactured using a specially developed Military Grade reinforced, super tough polyamideRail clamp nut has been redesigned so that there is no spin out when overtightenedAll plastic components have been changed to a higher strength material.Retaining pin for the cover has been redesigned so that the pin does not slip out of position.Weight: .5ozHeight: .879"Width: 1.08"Length: 2.23" O.A. /.6" from top of railMADE IN THE USA

   Allows attachment of optics with Trijicon RMR footprint to the KAC Modular Scope Cap.   SPECIFICATIONS Military Grade Durability Icluded Screw Kit Compatibility Scope Rings: KAC Modular Scope Cap ONLY Compatible accessories see under this article Accessories MADE IN THE USA

   The Knight's Armament Rail Mount Anti-Cant Device was created to function as the ideal method for shooters to boost their scopes. An efficient piece of riflescope gear will make a fantastic accessory for the scopes of shooters, and thanks to the Knight's Armament Rail Mount Anti-Cant Device, receiving a superior piece of scope equipment has never been easier. Manufactured using some of the most effective materials available, these Rifle Scope Accessories from Knight's Armament are the consequence of tireless initiatives to be certain you are shooting using the most beneficial the market is offering. Knight's Armament has been producing high quality equipment for your scope for a long time, and the Knight's Armament Rail Mount Anti-Cant Device is the outcome of their efforts to ensure that you have a great addition for your riflescope. For an ideal solution to make sure your already remarkable scope is that much better, select the Knight's Armament Rail Mount Anti-Cant Device. Specifications: Material: Steel - Aluminium Compatible accessories see under this article, accessories. MADE IN THE USA

   This Knight's Armament Aperture Sight Insert snaps into the 300 Meter Flip Up Rear Sight (PN:25475), constricting the peep aperture for a more precise sight picture. Currently in use by the United States Army, Marine Corps, and numerous law enforcement agencies worldwide. SPECIFICATIONS Military Grade Durability Compatibility: only to KAC 300 Meter Flip Up Rear Sight (PN:25475) MADE IN THE USA

   This Knight's Armament 45 degree offset mount puts the Aimpoint Micro at a 45 degree angle to the handguard or picatinny rail and can be attached to either the 3 o’clock or 9 o’clock rail position. Allows the use of magnified optics as the main sight. Just roll the rifle slightly to use the Aimpoint Micro for close quarter shooting. Mounts to standard picatinny rails with one cross bolt. Aimpoint bolts to the mount with the 4 screws that hold the standard Aimpoint mount on. Compatible with both T-1, T-2 H-1 and H-2 Aimpoint Micro optics. Aimpoint not included. SPECIFICATIONS Military Grade Durability Compatibility Optics: T-1, T-2 H-1 and H-2 Aimpoint Micro Compatibility Interface: 1913 Picatinny rail   MADE IN THE USA

   The Knight's Armament Modular scope cap Kit allows for attaching accessory sighting systems at the left or right 30 degree offset, or in the 12 o’clock position. Compatible with all appropriate size KAC scope mounts. SPECIFICATIONS Military Grade Durability Compatibility mounts: 34mm KAC mounts ONLY MADE IN THE USA

   Originally designed for the US military's SOPMOD Rifle Enhancement Program. The KAC M4 Folding Front Sight is a low-profile backup sighting solution that is designed to be attached to the top rail of a rifle's handguard. When stowed in the folded position, the M4's sight base extends back to envelope the front sight leaf on the right and left side, helping to protect it from damage.  MIL-STD-1913 attachment. Compatible with standard height rear sights. Color: Taupe Compatible accessories see under this article, accessories.   For more informations click on the image MADE IN THE USA