SAI PP40CP-3A Phantom .30 Suppressor

Die D.A.R. GmbH ist ein mittelständisches Unternehmen, welches sich auf die Herstellung hochwertiger automatischer Präzisionswaffen des Typs AR-15 und AR-10 spezialisiert hat. Bei allen Produkten steht der besonders hohe Qualitätsanspruch im Vordergrund. Das Streben nach Perfektion und die Rückbesinnung auf deutsche Qualität und Wertschöpfung hat sich DYNAMIC ARMS RESEARCH zum Ziel gesetzt.100 % MADE IN GERMANYAnders als bei konventionellen AR-Systemen ist die Barrel-Nut (Laufhaltemutter) nicht mit dem Vorderschaft verbunden, somit kann der Lauf bereits ab der Laufwurzel frei schwingen, dies fördert enorm die Präzision. Zusätzlich kommt hinzu, dass jeder Upper und Lower Receiver aus dem Vollen gefräst und aufeinander abgestimmt ist, der Lauf wird von D.A.R. handgeläppt, jede Schusswaffe besitzt eine echte durchgehende Picatinny Schiene, welche eine Einheit zusammen mit Upper-Receiver und Handguard bildet.Details/Angebotsumfang:Art:WechselsystemTyp:DAR-15Kaliber:.300 AAC BlackoutLauflänge:9"Drall:8"Drallprofil:6 Züge rechtsLaufkontur:Heavy Barrel LightGassystem:direct impingement, pistol lengthGasblock:DAR Low Profile Gasblock 750, Gen2, von vorn einstellbar (16 Klicks)Laufmündung:11° Varmint MündungMündungsgewinde:M15x1Laufbehandlung:Tenifer QPQ nitriert u. handgeläpptMündungsaufsatz:OhneVorderschaft:DAR M-Lok 12"Gehäuseoberteil:DAR AdvancedLadehebel:DAR Ladehebel, gasabweisend, beidseitigVerschluss:DAR Low Mass VerschlussbaugruppeFinish:Schwarz harteloxiert

  PREMIUM SUPPRESSOR SERIES ONE PIECE M-LOK® FREE FLOAT HANDGUARD SPECS: Extremely rugged, one piece free float design and construction Featuring seven sides of M-LOK® compatible slots MI-SP12M Rifle - 12.625" model weighs 12.8 ounces with barrel nut Inside diameter 1.670 inch, outside diameter 2.0 inch, 1.95 inch over mounting flats Made for use with suppressors no larger than 1.55" in diameter High quality MIL-STD 1913 top rail, T-marked for accessory location Construction from 6061 aluminum, hard coat anodized for a lifetime of service MI Lifetime Warranty Installed Weight: 12.8oz 100% Made in America - Keeps America Working US Patent Number USD788871 Included Barrel Nut Included Barrel Nut Wrench  Included 1 pcs Five Slot M-LOK® Rail Section  IMPORTANT COMPATIBILTY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to insure fit of this handguard. This handguard is compatible with forged upper receivers as well as the Midwest Industries billet upper receiver. NOT FOR USE ON GAS PISTON AR's! MADE IN THE USA

Specifications: Ultra-Rigid Design Made to Minimize Handguard FlexMade to reduce point of impact shift with popular lasers such as ATPIAL, DBAL, NGAL4140 Steel Heat Treated Barrel Nut – 2.250” LongBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type III Hard Coat AnodizedContinuous MIL-STD 1913 Picatinny Top railTwo Integral Anti-Rotation QD Sling SocketsSuper Slim 1.5” Outside and 1.250” Inside DiameterSeven Sides of M-LOK5-Slot Polymer M-LOK rail includedFully Dehorned and Deburred100% Made in USA - Keeps America Working Installed Weight: 9.25" - 11.4oz10.50" - 12.4oz13.5" - 14.1oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: Ultra-Rigid Design Made to Minimize Handguard FlexMade to reduce point of impact shift with popular lasers such as ATPIAL, DBAL, NGAL4140 Steel Heat Treated Barrel Nut – 2.250” LongBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type III Hard Coat AnodizedContinuous MIL-STD 1913 Picatinny Top railTwo Integral Anti-Rotation QD Sling SocketsSuper Slim 1.5” Outside and 1.250” Inside DiameterSeven Sides of M-LOK5-Slot Polymer M-LOK rail includedFully Dehorned and Deburred100% Made in USA - Keeps America Working Installed Weight: 9.25" - 11.4oz10.50" - 12.4oz13.5" - 14.1oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: Ultra-Rigid Design Made to Minimize Handguard FlexMade to reduce point of impact shift with popular lasers such as ATPIAL, DBAL, NGAL4140 Steel Heat Treated Barrel Nut – 2.250” LongBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type III Hard Coat AnodizedContinuous MIL-STD 1913 Picatinny Top railTwo Integral Anti-Rotation QD Sling SocketsSuper Slim 1.5” Outside and 1.250” Inside DiameterSeven Sides of M-LOK5-Slot Polymer M-LOK rail includedFully Dehorned and Deburred100% Made in USA - Keeps America Working Installed Weight: 9.25" - 11.4oz10.50" - 12.4oz13.5" - 14.1oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: T-Series4140 Heat Treated Barrel NutBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type 3 Hard Coat AnodizedHigh Quality MIL-STD 1913 Picatinny rails, T-marked for accessory locationProvides continuous monolithic look with full length upper railTwo Integral Anti-Rotation QD Sling Sockets2.43" Tall, 2.15" Wide1.3” Inside DiameterFully Dehorned and Deburred100% Made in USA- Keeps America Working Installed Weight 7.25" - 9.5oz9.25" - 11.4oz9.50" - 11.8oz10.00" - 12.3oz12.625" - 14.6oz14.0" - 16.0oz15.0" - 17.0oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: T-Series4140 Heat Treated Barrel NutBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type 3 Hard Coat AnodizedHigh Quality MIL-STD 1913 Picatinny rails, T-marked for accessory locationProvides continuous monolithic look with full length upper railTwo Integral Anti-Rotation QD Sling Sockets2.43" Tall, 2.15" Wide1.3” Inside DiameterFully Dehorned and Deburred100% Made in USA- Keeps America Working Installed Weight 7.25" - 9.5oz9.25" - 11.4oz9.50" - 11.8oz10.00" - 12.3oz12.625" - 14.6oz14.0" - 16.0oz15.0" - 17.0oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: T-Series4140 Heat Treated Barrel NutBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type 3 Hard Coat AnodizedHigh Quality MIL-STD 1913 Picatinny rails, T-marked for accessory locationProvides continuous monolithic look with full length upper railTwo Integral Anti-Rotation QD Sling Sockets2.43" Tall, 2.15" Wide1.3” Inside DiameterFully Dehorned and Deburred100% Made in USA- Keeps America Working Installed Weight 7.25" - 9.5oz9.25" - 11.4oz9.50" - 11.8oz10.00" - 12.3oz12.625" - 14.6oz14.0" - 16.0oz15.0" - 17.0oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: T-Series4140 Heat Treated Barrel NutBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type 3 Hard Coat AnodizedHigh Quality MIL-STD 1913 Picatinny rails, T-marked for accessory locationProvides continuous monolithic look with full length upper railTwo Integral Anti-Rotation QD Sling Sockets2.43" Tall, 2.15" Wide1.3” Inside DiameterFully Dehorned and Deburred100% Made in USA- Keeps America Working Installed Weight 7.25" - 9.5oz9.25" - 11.4oz9.50" - 11.8oz10.00" - 12.3oz12.625" - 14.6oz14.0" - 16.0oz15.0" - 17.0oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: T-Series4140 Heat Treated Barrel NutBarrel Nut and Wrench IncludedFeatures Patented 4140 Heat Treated Torque Plate6061 Aluminum Type 3 Hard Coat AnodizedHigh Quality MIL-STD 1913 Picatinny rails, T-marked for accessory locationProvides continuous monolithic look with full length upper railTwo Integral Anti-Rotation QD Sling Sockets2.43" Tall, 2.15" Wide1.3” Inside DiameterFully Dehorned and Deburred100% Made in USA- Keeps America Working Installed Weight 7.25" - 9.5oz9.25" - 11.4oz9.50" - 11.8oz10.00" - 12.3oz12.625" - 14.6oz14.0" - 16.0oz15.0" - 17.0oz IMPORTANT COMPATIBILITY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to ensure fit of this handguard. This handguard is compatible with standard forged upper receivers. NOT FOR USE ON GAS PISTON ARs!

Specifications: Two Piece Drop-In HandguardIncredibly LightweightSolid Lock upDrop-in, no gunsmith installation, installs in minutes like factory handguards!Five anti rotation QD socket locations for QD sling swivelsMonolithic type continuous top railMIL-STD 1913 top railConstructed from 6061 aluminum hard coat anodizedLifetime Warranty100% Made in the U.S.A.1.83" wide and 2.25" tall Installed Weight Carbine - 5.0ozMid-Length - 6.6ozRifle Length - 8.5oz Overall Length MI-17M - 7"MI-18M - 8.5"MI-19M - 12.5" IMPORTANT COMPATIBILITY NOTES! MI-17M (Carbine) – Only for use with round handguard capsMI-18M (Mid-Length) – Only for use with triangle handguard capsMI-19M (Rifle) – Only for use with triangle handguard caps

Specifications: Two Piece Drop-In HandguardIncredibly LightweightSolid Lock upDrop-in, no gunsmith installation, installs in minutes like factory handguards!Five anti rotation QD socket locations for QD sling swivelsMonolithic type continuous top railMIL-STD 1913 top railConstructed from 6061 aluminum hard coat anodizedLifetime Warranty100% Made in the U.S.A.1.83" wide and 2.25" tall Installed Weight Carbine - 5.0ozMid-Length - 6.6ozRifle Length - 8.5oz Overall Length MI-17M - 7"MI-18M - 8.5"MI-19M - 12.5" IMPORTANT COMPATIBILITY NOTES! MI-17M (Carbine) – Only for use with round handguard capsMI-18M (Mid-Length) – Only for use with triangle handguard capsMI-19M (Rifle) – Only for use with triangle handguard caps

Specifications: No gunsmith drop-in installation, installs like factory plastic handguards!Gen2 design with four anti-rotation QD sockets for push button swivelsIncredibly light weight, extremely solid lock-up with monolithic type continuous top railHigh quality 1913 mil spec rails, T-marked for locationConstructed from 6061 aluminum hard coat anodized100% Made in the U.SA. with a lifetime warranty2.3" wide and 2.44" tall Installed Weight Carbine - 7.5ozMid-Length - 9.7ozRifle length - 12.9oz Overall Length MCTAR-17G2 - 7"MCTAR-18G2 - 8.5"MCTAR-19G2 - 12.5" COMPATIBILITY NOTES! MCTAR-17G2 (Carbine) – Only for use with round handguard capsMCTAR-18G2 (Mid-Length) – Only for use with triangle handguard capsMCTAR-19G2 (Rifle) – Only for use with triangle handguard caps

Specifications: No gunsmith drop-in installation, installs like factory plastic handguards!Gen2 design with four anti-rotation QD sockets for push button swivelsIncredibly light weight, extremely solid lock-up with monolithic type continuous top railHigh quality 1913 mil spec rails, T-marked for locationConstructed from 6061 aluminum hard coat anodized100% Made in the U.SA. with a lifetime warranty2.3" wide and 2.44" tall Installed Weight Carbine - 7.5ozMid-Length - 9.7ozRifle length - 12.9oz Overall Length MCTAR-17G2 - 7"MCTAR-18G2 - 8.5"MCTAR-19G2 - 12.5" COMPATIBILITY NOTES! MCTAR-17G2 (Carbine) – Only for use with round handguard capsMCTAR-18G2 (Mid-Length) – Only for use with triangle handguard capsMCTAR-19G2 (Rifle) – Only for use with triangle handguard caps

Specifications: Made for dedicated suppressor useWidth 2.06 inches / OAL height 2.6 inches / Internal Diameter 1.8 inches / 45,7mmFits A1 and A2 models of MP5 variantsProfessional grade one piece designSimple installation, includes all toolsExtremely lightweight designOne five slot M-LOK® compatible rail includedFeatures two anti-rotation QD sling swivel socketsConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R CompliantLifetime WarrantyPatented and Patents Pending Product COMPATIBILITY: Compatible with HK MP5K, and clones such as Century AP5K, Zenith ZF5K and Military Arms Corporation MAC 5K. This product is NOT compatible with factory SD models or any MP5 .22LR firearms. Installed Weight:7.5oz Length:7 3/8" COMPATIBILITY NOTES! *Due to the length of this handguard, you must run suppressor or blast diverter. We are NOT responsible for damage done by not complying with this*

Specifications: Made for dedicated suppressor useWidth 2.06 inches / OAL height 2.6 inches / Internal Diameter 1.8 inches / 45,7mmFits A1 and A2 models of MP5 variantsProfessional grade one piece designSimple installation, includes all toolsExtremely lightweight designOne five slot M-LOK® compatible rail includedFeatures two anti-rotation QD sling swivel socketsConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R CompliantLifetime WarrantyPatented and Patents Pending Product COMPATIBILITY: Compatible with HK MP5, and clones such as Century AP5, Zenith ZF5 and Military Arms Corporation MAC 5. This product is NOT compatible with factory SD models or any MP5 .22LR firearms. Installed Weight 9.4oz Length 10 3/8" COMPATIBILITY NOTES! *Due to the length of this handguard, you must run suppressor or blast diverter. We are NOT responsible for damage done by not complying with this*

Specifications: Professional grade one-piece designTri-Rail 1913 Picatinny on 3 sides for accessory attachmentSimple installation includes all toolsExtremely lightweight designFeatures two anti-rotation QD sling swivel socketsConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R CompliantM-LOK™ angled slots for light mountsLifetime WarrantyPatented Products COMPATIBILITY: Compatible with HK MP5K, and clones such as Century AP5K, Zenith ZF5K and Military Arms Corporation MAC 5K. This product is NOT compatible with any MP5 .22LR firearms. Installed Weight:3.1oz

Specifications: Professional grade one-piece designTri-Rail 1913 Picatinny on 3 sides for accessory attachmentSimple installation includes all toolsExtremely lightweight designFeatures two anti-rotation QD sling swivel socketsConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R CompliantM-LOK™ angled slots for light mountsLifetime WarrantyPatented Products COMPATIBILITY: Compatible with HK MP5, and clones such as Century AP5, Zenith ZF5 and Military Arms Corporation MAC 5. This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 5.8oz

Specifications:Professional grade one piece designSimple installation, includes all toolsExtremely lightweight designSlim 1.6 inch diameterOne five slot M-LOK™ compatible rail includedFeatures two anti-rotation QD sling swivel socketsConstructed of 6061 aluminum, hard coat anodized for a lifetime of service100% Made in the U.S.A., 922R CompliantMI Lifetime WarrantyPatented Products COMPATIBILITY: Compatible with HK MP5K/SP89M, and clones such as Century AP5K, Zenith ZF5K and Military Arms Corporation MAC 5K.This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 2.6oz

Upgrade your HK MP5/MP5K or compatible clone with the Midwest Industries MP5/MP5K Optic Mount, a compact and versatile solution for mounting red dot sights with precision and ease. Designed for reliability and performance, this mount is perfect for shooters seeking a robust, user-friendly optic solution. Key Features: Easy Installation: No gunsmith required; all necessary tools included for a quick and straightforward setup.Versatile Mounting: Supports red dot sights via a 5-lug 1913 Picatinny rail, offering flexible optic compatibility.Ergonomic Design: High-mount configuration promotes a comfortable, upright shooting posture for enhanced control and accuracy.Robust Construction: Patent-pending rock-solid design ensures maximum durability and reliability in demanding conditions.Still able to use iron sights if needed via pass-through channel. Specifications: Weight: 3.3 ozOverall Length: 3.5”Material: Precision-machined Hard Coat Anodized 6061 Aluminum for a lifetime of serviceFully 922R CompliantMade in the USA Compatibility: Designed for HK MP5/K and compatible clones, including Century Arms AP5/K, Zenith ZF-5/K, and Military Arms Corporation MAC-5/KOptimized for 9mm receivers; potential fitment issues may occur with .40 cal or 10mm receiversNOT compatible with any MP5 .22LR firearms

Upgrade your HK MP5/MP5K or compatible clone with the Midwest Industries MP5/MP5K Optic Mount, a compact and versatile solution for mounting red dot sights with precision and ease. Designed for reliability and performance, this mount is perfect for shooters seeking a robust, user-friendly optic solution. Key Features: Easy Installation: No gunsmith required; all necessary tools included for a quick and straightforward setup.Versatile Mounting: Supports red dot sights via a 9-lug 1913 Picatinny rail, offering flexible optic compatibility.Ergonomic Design: High-mount configuration promotes a comfortable, upright shooting posture for enhanced control and accuracy.Robust Construction: Patent-pending rock-solid design ensures maximum durability and reliability in demanding conditions.Still able to use iron sights if needed via pass-through channel. Specifications: Weight: 4.6 ozOverall Length: 5.25” / 9 lugsMaterial: Precision-machined Hard Coat Anodized 6061 Aluminum for a lifetime of serviceFully 922R CompliantMade in the USA Compatibility: Designed for HK MP5/K and compatible clones, including Century Arms AP5/K, Zenith ZF-5/K, and Military Arms Corporation MAC-5/KOptimized for 9mm receivers; potential fitment issues may occur with .40 cal or 10mm receiversNOT compatible with any MP5 .22LR firearms

Specifications: 1913 Picatinny adaptor for side folding stocks and bracesSimple installationExtremely lightweight designFeatures anti-rotation QD sling swivel socketConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R Compliant COMPATIBILITY: Compatible with HK MP5K and clones such as Century AP5K, Zenith ZF5K and Military Arms Corporation MAC 5K.*Fitting may be required. There is variation between clones and HK SP5's that may require gunsmith installation*This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 3oz Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

Specifications: 1913 Picatinny adaptor for side folding stocks and bracesSimple installationExtremely lightweight designFeatures anti-rotation QD sling swivel socketConstructed from Hard Coat Anodized 6061 Aluminum for a lifetime of serviceMade in the USA922R Compliant COMPATIBILITY: Compatible with HK MP5 and clones such as Century AP5, Zenith ZF5 and Military Arms Corporation MAC 5.*Fitting may be required. There is variation between clones and HK SP5's that may require gunsmith installation*This product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 5oz Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.

  The AR10TAC14-NFA meets the needs of front line users as well as home defense conscious civilians with a platform that is compact and modular from the factory. All Armalite Tactical Series rifles come equipped with MAGPUL MBUS flip-up sights and MOE+ pistol grips. The sturdy 12” Tactical M-LOK®  handguard provides ample hand placement and a full-length MIL-STD 1913 12 o'clock rail for sights an accessories. An adjustable gas block also allows the rifle to be individually tuned for optimal performance for your choice of ammunition. The dual-purpose flash hiding compensator tames recoil while reducing signature. ArmaLite is the originator of the AR-10® and AR-15 rifles. For 60 years, we have manufactured the AR-10®, M-15™, AR-30A1, AR-31 and AR-50. SPECIFICATIONS Design: TACTICAL  Product Line: AR-10® Gas System: Direct Impingement Gas Block: ARMALITE Adjustable Caliber: 7.62x51 NATO / .308 WIN Barrel: ARMALITE HB, BLACK NITRIDE 416R STAINLESS STEEL Bolt: ARMALITE AR-10®, MPI-HP proof Barrel Lenght: 14.5" Twist Rate: 1:10 RH Muzzle Device: ARMALITE TACTICAL BRAKE  Handguard: 12" ARMALITE GEN II M-LOK® FREE FLOAT Stock: MAGPUL STR® MIL-SPEC 7 POSITION COLLAPSIBLE   Trigger: ARMALITE TWO-STAGE PRECISION DROP-IN TRIGGER Muzzle Thread: 5/8-24 UNEF Safety: Ambidextrous Charging Handle: Ambidextrous Receiver Endplate: Ambidextrous MAGPUL MBUS® Flip-Up Sight Set MAGPUL MOE+ Pistol Grip Attachment Method: M-LOK® Length: 33.2" COLLAPSED | 37.2" EXTENDED  Weight: 8.4 LBS.  Included: 10-ROUND MAGAZINE Included C.I.P. Compatible accessories see under this article, accessories MADE IN THE USA

  Details: Extremely rugged, one piece free float design and construction Featuring seven sides of M-LOK(TM) compatible slots MI-SP15M Rifle - 15.00" model weighs 14.6 ounces with barrel nut Inside diameter 1.670 inch, outside diameter 2.0 inch, 1.95 inch over mounting flats Made for use with suppressors no larger than 1.55" in diameter High quality MIL-STD 1913 top rail, T-marked for accessory location One five slot Magpul®  M-LOK® polymer rail section included Barrel nut and barrel nut wrench included Construction from 6061 aluminum, hard coat anodized for a lifetime of service MI Lifetime Warranty 100% Made in America - Keeps America Working US Patent Number USD788871 IMPORTANT COMPATIBILTY NOTES! Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to insure fit of this handguard. This handguard is compatible with forged upper receivers as well as the Midwest Industries billet upper receiver. NOT FOR USE ON GAS PISTON AR's! MADE IN THE USA

  The SuperSASS™ (Semi-Automatic Sniper System) was originally designed for use by the US Military and for shooters who demand superb accuracy. The SuperSASS™ Gen II has a fully adjustable stock and an adjustable gas system built to accommodate suppressed and un-suppressed fire and is the ultimate tactical rifle system on the market. ArmaLite is the originator of the AR-10® and AR-15 rifles. For 60 years, we have manufactured the AR-10®, M-15™, AR-30A1, AR-31 and AR-50. SPECIFICATIONS Design: A-SERIES SuperSASS™ A-Series Product Line: AR-10® Gas System: Direct Impingement Gas Block: ARMALITE Adjustable Caliber: 7.62x51 NATO / .308 WIN Barrel: ARMALITE HB, BLACK NITRIDE 416R STAINLESS STEEL Bolt: ARMALITE AR-10®, MPI-HP proof Barrel Length: 20" Twist Rate: 1:10 RH Muzzle Device: ARMALITE TACTICAL BRAKE Muzzle Thread: 5/8-24 UNEF Safety: Ambidextrous Handguard: 15" ARMALITE GEN II M-LOK® FREE FLOAT Stock: ADJUSTABLE CHEEK AND LENGTH OF PULL Trigger: ARMALITE TWO-STAGE PRECISION DROP-IN TRIGGER MAGPUL MOE+ Pistol Grip Attachment Method: M-LOK® Length: 43"  Weight: 11.2 LBS. Included: 10-ROUND MAGAZINE Included C.I.P. Compatible accessories see under this article, accessories MADE IN THE USA