SIGHTMARK Citadel 3-18x50 LR1 MOA FFP
599,00 €
Produktinformationen "SIGHTMARK Citadel 3-18x50 LR1 MOA FFP"
Das brandneue SIGHTMARK Citadel 3-18x50 LR1 bietet ein MOA Absehen in der ersten Bildebene, das Absehen wird somit beim Zoomvorgang mitvergrössert. Mit einer Brennweite von 3-18 ist es von nahen bis weite Ziele einsetzbar, unterstützt wird dies durch einen Zoomfaktor von 6:1, das Absehen ist in MOA eingeteilt, die Justierfeinheit liegt bei 1/4 MOA pro Klick, es ist Stoss-, Rückstoss-, Staub-, Beschlag- und Wasserfest sowie absolut wiederholgenau. Das SIGHTMARK Citadel 3-18x50 LR1 MOA FFP findet vorzugsweise auf der AR-Plattform im statischen Bereich sowie auf allen Repetierbüchsen Anwendung.
Zu diesem Zielfernrohr empfehlen wir für eine optimale Bauhöhe bei durchgehender Rail, wie dies meistens bei AR-Modellen der Fall ist, 30mm High-Montageringe oder Blockmontagen/Cantilevermontagen mit einer Bauhöhe von 38.
Bei Repetierbüchsen mit Picatinnyschienen empfehlen wir für eine optimale Bauhöhe Low oder Medium Montageringe, bei Blockmontagen eine Bauhöhe von 28-34.
Ausgezeichnete Qualität zum besten Preis
Lieferumfang/Details:
- SIGHTMARK Citadel 3-18x50 LR1
- LR1 Absehen mit MOA Einteilung
- FFP / First Focal Plane
- Tubus: 30mm
- 1/4 MOA Klickverstellung
- Hochvergütete Linsen, mehrfach beschichtet
- Geätztes Absehen: direkt ins Glas geätztes Absehen ermöglicht ein feines Absehen
- Leuchtabsehen: für präzises Schießen bei schlechten Lichtverhältnissen
- 11 Helligkeitsstufen
- Stickstoffgefüllt gegen Beschlagen
- Parallaxenausgleich von 15 Yards bis unendlich
- IP67 Waterproof
- Nebelresistent
- Stoßfest bis 1200G Belastung
- Gewicht nur 740 Gramm
- Inklusive Throw Lever/Schnellverstellhebel
- Inklusive Sunshade
- Inklusive CR2032 Batterie
- Inklusive Flip-Up Kappen und Mikrofasertuch
- Kompatible Montagen und Zubehör siehe unter diesem Artikel, Zubehör
DESIGNED IN TEXAS
Sightmark Citadel 3-18x50 LR1 – SM13039LR1
The Citadel 3-18x50 LR1 riflescope is designed for medium-to-long range shooting, competition shooting, law enforcement and hunting. The Citadel features a 6x optical system, a fully multi-coated lens, exposed locking turrets and a red illuminated reticle with 11-brightness settings. The first focal plane reticle means the size of the reticle remains the same in any magnification and holdovers and range finding can be performed. The new reticle, LR1, is a 1/4 MOA reticle allowing each click adjustment to move the point of impact ¼ of an inch at 100 yards. The riflescope is crafted out of a single shockproof aircraft-grade aluminum 30mm tube and is IP67 waterproof and dustproof. The optic comes complete with flip-up covers, a throw lever to adjust the magnification with ease and a sunshade.
FEATURED (FEATURES) DESCRIPTION
-
LR1 reticle at ¼ click adjustments at 100 yards
- 6x optical system for medium-to-long range shooting
- First focal plane reticle – reticle remains the same as you zoom in on a target, range targets and use holdovers at any magnification
- Multi-coated lens system – one or more lens surfaces are coated with an anti-reflective coating
- Exposed turrets – pop-up exposed turrets that pull up to adjust and push down to lock in place
- Red illuminated reticle with 11 brightness settings
| Reticle, Type | LR1 (MOA) |
| Reticle | Etched glass |
| Reticle, Color | Red |
| Illuminated (yes/no) | Yes |
| Reticle Brightness Setting | 0-11 |
| Finish/Color | Matte black |
| Magnification | 3-18 x |
| Diameter, Objective Lens | 50 mm |
| Diameter, Eyepiece | 1.6 / 40 in / mm |
| Diameter, Exit Pupil | 7.4 - 2.7 mm |
| Eye Relief | 4.6 - 3.7 / 116.8 - 94 in / mm |
| Field of view, m@100m | 11 - 1.9 |
| Field of view, ft@100yd | 33 - 5.8 |
| Diopter Adjustment | +2 to -2 |
| Diameter, Tube | 30 / 1.18 mm / in |
| Parallax Setting | 15 - ∞ yds |
| Mil adjustment (one click =) | 1/4 MOA |
| Windage Range of Adjustment | 60 MIL |
| Elevation Range of Adjustment | 60 MIL |
| Windage & Elevation, Lock | Yes |
| Maximum Recoil | .338 |
| Battery Type | CR2032 |
| Battery life, hours | 100 - 70 |
| Battery Voltage, V | 3 |
| Sunshade | Yes |
| Nitrogen Filled | Yes |
| Shockproof | Yes |
| Fog Proof | Yes |
| Focal Plane | 1st |
| IP Rating (waterproof) | IP 67 - waterproof and dustproof |
| Body Material | Aluminum |
| Lens Coating | Fully multi-coated |
| Operating Temperature | 0 to 120 / -17 to 49 F / C |
| Length | 13 / 330 in / mm |
| Width | 3.1 / 79 in / mm |
| Height | 2.24 / 56 in / mm |
| Weight, oz | 26.1 oz |
Accessory Items
Die D.A.R. GmbH ist ein mittelständisches Unternehmen, welches sich auf die Herstellung hochwertiger automatischer Präzisionswaffen des Typs AR-15 und AR-10 spezialisiert hat. Bei allen Produkten steht der besonders hohe Qualitätsanspruch im Vordergrund. Das Streben nach Perfektion und die Rückbesinnung auf deutsche Qualität und Wertschöpfung hat sich DYNAMIC ARMS RESEARCH zum Ziel gesetzt. 100 % MADE IN GERMANY Anders als bei konventionellen AR-Systemen ist die Barrel-Nut (Laufhaltemutter) nicht mit dem Vorderschaft verbunden, somit kann der Lauf bereits ab der Laufwurzel frei schwingen, dies fördert enorm die Präzision. Zusätzlich kommt hinzu, dass jeder Upper und Lower Receiver aus dem Vollen gefräst und aufeinander abgestimmt ist, der Lauf wird von D.A.R. handgeläppt. Das .223 Wylde Patronenlager bietet den besten Kompromiss wenn es darum geht höchste Präzision mit der größten Vielfalt an Munitionslaborierungen oder unterschiedlichen Geschosslängen bei sicheren Gasdrücken zu erreichen und ist somit auch für Wiederlader sehr interessant. Das nach Bill Wylde benannte Hybrid-Patronenlager ermöglicht sowohl die Verwendung von .223 Remington Patronen als auch die nach SAMMI, mit etwas höheren Druck entwickelnde 5.56x45mm NATO Patrone. Spezifikationen: Dynamic Arms Research DAR-15 IPSC Halbautomatisches Selbstladegewehr Laufhersteller: Lothar WaltherDAR-15 Lower System R02Kaliber: .223 Rem Wylde / 5.56 NatoLauflänge: 16,75"Drall: 8“Drallprofil: 6 Züge rechtsLaufkontur: Super Light BarrelLaufmaterial: Spezial-GewehrlaufstahlLaufbeschichtung: Tenifer-QPQLaufmündung: 11° Varmint Mündung Match Sonderbehandlung, Laufprofil handgeläppt Mündungsgewinde: 1/2-28 UNEFMündungskomponente: DAR Dynamic CompGassystem: direct impingement, rifle lengthGasentnahme: DAR Low Profile Gasblock 750, einstellbarGehäuseoberteil: DAR Upper Advanced Vorderschaft: DAR Carbon Tube inkl. PicatinnyschieneLadehebel: DAR Ladehebel, gasabweisend, beidseitig bedienbarVerschluss: DAR VerschlussbaugruppeGehäuseunterteil: DAR Lower AdvancedZerlegestifte: DAR Pins, von Hand aus eingepasstAbzug: TRIGGERTECH Matchabzug FlatSicherung: beidseitig 45 oder 90 Grad einstellbarHinterschaft: DAR Super Light StockGriff: HOGUE OverMolded Pistol GripMagazin: Magpul PMAG 10Oberflächenbehandlung Upper: Mil-Spec III HarteloxiertAuslieferung: D.A.R. Waffenkoffer, 10 Schuss MagazinGesamtlänge: 930 mm (905 mm)Gewicht: nur 2.811 g
Hochwertiges AR-15 Wechselsystem in der neuesten M-LOK® Ausführung von ANDERSON Zuverlässig, robust und schnell, für statische oder dynamische Anwendungen, unerreichtes Preis/Leistungsverhältnis, Einsatzweite bis 100m. Details/Angebotsumfang: ANDERSON AM-9 M-LOK® AR-15 Wechselsystem Kompatibel mit allen 2-reihigen GLOCK und Aftermarket Magazine wie z.B. MAGPUL, KCI usw. LRBHO Funktion, je nach Wahl des verwendeten Lower Receivers oder Magazinadapters Upper aus einem geschmiedeten Block 7075-T6 Aluminium gefräst Kaliber 9X19 / 9mm Luger Drall 1:10 Kaltgehämmerter 16 Zoll Lauf aus 4150 Chrom-Molybdän-Vanadium-Stahl Oberfläche: MIL-SPEC Type 3 Hard Anodized Black Inklusive 9mm Flash Hider Comp Inklusive Verschluss mit GLOCK® Cut Inklusive Charging Handle 15'' Free Float Lightweight M-LOK® Handguard aus T-6061 T6 Aluminium Mündungsgewinde 1/2-36 UNEF Kompatible Schalldämpfer, Lower Receiver, Magazinadapter sowie Zubehör, siehe unter diesem Artikel, Zubehör Funktion in Verbund mit AR-15 GLOCK® Lower Receiver oder GLOCK® AR-15 Magazinadapter Every part manufactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer. 100% AMERICAN MADE. 100% ANDERSON.
LEAP/08 State of the art 30mm scope mounts. Designed for military shooters who want the lightest, stiffest, and easiest to use quick-detach scope mount possible. SMART STRUCTURE The LEAP/08 base incorporates different structural elements to maximize overall performance.A large diameter tubular section up front to resist torsion from side impacts, and a very wide I-beam bridge in the rear to resist recoil induced oscillations. Every Leap mount is CNC milled from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations. ViseRing™ Designed from the ground up to be lighter, lower-profile, and easier to use than traditional split rings. A low-profile design doesn't get in your way of viewing or manipulating your scope's adjustment turrets. A high-strength, multi-link hinge eliminates the uncertain and tedious setup required by split rings. SMOOTH IS FAST LEAP mounts have no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. ClickDrive™ The world's most efficient quick-detach mechanism. A fluted crown requires only the torque from your bare hand to securely clamp the mount onto a rail, and uses the force from a spring-loaded ball-detent to make it completely recoil proof. Return-to-zero is guaranteed as long as the same person takes it on and off. Technical Specs Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.93" Ring diameter 30mm Cant 0MOA Overhang 2.0" Weight 163g Origin United States of America COMPATIBILITY Rails MIL-STD-1913 Picatinny* 30mm See technical drawing for details INCLUDED Mount Scalarworks® Leap™ (SW0820) Leveling system LevelDrive™ screw Fasteners M4x0.75 Nylok® treated (Torqued @ 20in*lbs) Drivers T25 Torx driver bit Manual Scalarworks® Leap/08MADE IN THE USA