SUREFIRE WARCOMP-556 with SOCOM Fast-Attach® Interface 1/2-28

  MEET THE NEW WAR Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.  A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp  Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 14.5" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome Lined Bore and Chamber Mid Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 1/2-28 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 13" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS Included BCM Flash Hider, NON pinned or welded Included BCM MK2 Ambidextrous Charging Handle - Large Latch Included BCM 3" M-LOK Picatinny Rail Section  Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B  Compatible accessories, see under this article, accessoriesMADE IN THE USA

  MEET THE NEW WAR Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.  A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp  Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 9" Barrel 1/7 Twist M4 Feed Ramp Extension .300 AAC Blackout Chrome Lined Bore and Chamber Pistol Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 5/8-24 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 8" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS   Included BCM Bolt Carrier Group Included BCM Flash Hider, non pinned or welded Included BCM MK2 Ambidextrous Charging Handle - Large Latch Included BCM 3" M-LOK Picatinny Rail Section  Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B  Compatible accessories, see under this article, accessories MADE IN THE USA

MEET THE NEW WAR Exacting construction and rigorous durability are the standard for every weapon system that comes off our line. BCM® Professional Grade Weaponry® are hard use tools, built to perform in combat where unfailing performance is the only standard for men and machine. Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.  A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2M4 Feed Ramp Hard Coat Anodized per Mil-A-8625F, Type III, Class 2T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile)Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPECMachined from Mil-Spec Carpenter No. 158® Steel to USGI specificationsHPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected)Shot PeenedTool Steel Extractor w/ BCM® Extractor SpringBlack Extractor InsertHeat treatedSuperfinished Carrier BodyForward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel9" Barrel 1/7 TwistM4 Feed Ramp Extension.300 AAC Blackout Chrome Lined Bore and ChamberPistol Length Gas SystemHPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPECMuzzle thread: 5/8-24 UNEFChrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 8" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting systemFree Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shootingPrecision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweightProprietary engineered profile offers additional cross sectional strengthSteel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heatHard Coat Anodized per Mil-A-8625F, Type III, Class 2 BCM® LOWER RECEIVER SPECIFICATIONS Receiver Machined from Aluminum Forgings 7075-T6Hardcoat Anodized (per MIL-A-8625F, Type III, Class 2)Low Shelf for RDIAS Installation Low Shelf for Accuwedge useAmbi Fire Control MarkingsBCM® PNT TriggerBCM® Milspec Carbine 7075-T6 Receiver ExtensionBCM® Staked M4 Castle Lock NutBCM® USGI Carbine H Buffer (1 USGI Tungsten, 2 Steel)BCM® GUNFIGHTER Trigger GuardBCM® GUNFIGHTER Pistol GripBCM® GUNFIGHTER QD Sling Swivel Receiver End PlateBCM® Enhanced Takedown PinsBCM® MOD 2 SOPMOD Stock (Not pictured) Informations: Lengths: 66,3 - 74,6 cmIncluded C.I.P.Laser markings were carried out covertlyAT - Category B with 10 ROUND MAGAZINEIncluded EXW 10 ROUND MAGAZINECompatible accessories, see under this article, accessories

  MEET THE NEW WAR Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.  A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp  Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 11.5" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome Lined Bore and Chamber Carbine Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 1/2-28 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 10" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS   Included BCM Bolt Carrier Group Included BCM Flash Hider, non pinned or welded Included BCM STD Charging Handle Included BCM 3" M-LOK Picatinny Rail Section  Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B  Compatible accessories, see under this article, accessories MADE IN THE USA

  Compatibel to SOCOM series Muzzle devices with the proven SureFire Fast- Attach® System Compatibel Muzzle devices, see accessories under this article   The SureFire Warden Blast Regulator directs the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter's firing position. It also limits any dust signature from the weapon when fired from a prone position. The Warden Blast Regulator attaches to any SureFire SOCOM 5.56 or 7.62 muzzle device through the same patented SureFire Fast- Attach® system found on SureFire SOCOM Series suppressors. Unlike sound suppressors. Specifications: Finish:  Cerakote Fabric/Material: Stainless Steel Caliber: Universal  5.56 / 7.62 / .300 BLK / 6.5 CM etc. Threads per Inch:Non Threaded Length: 3.5 in Features: Compatibel to SOCOM series muzzle devices with the proven SureFire Fast- Attach® system Not compatibel to other Flash Hiders or Muzzle Brakes! Directs concussion and muzzle blast forward Rugged stainless steel body built to SureFire's exacting standards Cerakote coating maintains look and provides added durabilityMADE IN THE USA

  Compatibel to SOCOM series Muzzle devices with the proven SureFire Fast- Attach® System Compatibel Muzzle devices, see accessories under this article   The SureFire Warden Blast Regulator directs the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter's firing position. It also limits any dust signature from the weapon when fired from a prone position. The Warden Blast Regulator attaches to any SureFire SOCOM 5.56 or 7.62 muzzle device through the same patented SureFire Fast- Attach® system found on SureFire SOCOM Series suppressors. Unlike sound suppressors. Specifications: Finish:  Cerakote Fabric/Material: Stainless Steel Caliber: Universal  5.56 / 7.62 / .300 BLK / 6.5 CM etc. Threads per Inch:Non Threaded Length: 3.5 in Features: Compatibel to SOCOM series muzzle devices with the proven SureFire Fast- Attach® system Not compatibel to other Flash Hiders or Muzzle Brakes! Directs concussion and muzzle blast forward Rugged stainless steel body built to SureFire's exacting standards Cerakote coating maintains look and provides added durabilityMADE IN THE USA