TACTICAL SOLUTIONS TSG-22 Extractor Kit

  The TSG-22 CONVERSION is a premium quality and highly accurate .22 LR barrel and receiver conversion for GLOCK® Pistols and is complete made from solid 4140 steel. Our threaded Barrel configuration in 1/2-28 UNEF allows the installation of a suppressor.  The TSG-22 quickly and easily converts Generations 1 through 4 of the Glock® models 17/22* into an accurate .22LR pistol. This conversion maintains a similar weight and feel to your factory Glock® pistol, allowing for cost effective shooting and training. Each conversion undergoes a nitride surface treatment to increase wear resistance, inhibit corro[1]sion, and reduce friction. Our TSG-22® conversion features factory Glock® sights and includes one TacSol® 10-round polymer magazine. There are 2 recoil buffers included with your TSG-22. The correct buffer for Glocks® Gen 1-3 is installed on the conversion unit ( marked G3). For Gen 4 Glocks®, you will find a second buffer in your box with a laser marking of G4. If you have a Gen 4 Glock®, remove the Gen 3 buffer installed on the conversion unit and install the G4 buffer unit.  Transform your GLOCK® 17 into a cost-effective .22LR pistol with the TacSol TSG-22 conversion kit. Crafted from solid 4140 steel, this conversion maintains the weight and feel of your factory GLOCK, providing a realistic shooting experience at a fraction of the cost. For best results with your TSG-22 .22LR conversion use high velocity ammunition with a 40 grain round nose bullet. We do NOT recommend the use of Hypervelocity ammunition. Easy disassembly: While holding the slide slightly rearward, press the barrel rearward from the muzzle, then proceed with the Glock® removal process as usual. SPECS: TSG-22 GEN3 Conversion Kit  Barrel Diameter: 14,0 mm Chamber: .22LR Polished Feed Ramp Barrel thread: 1/2-28 UNEF Twist: 1:16” Barrel Length: 4.8″ Weight: 13 oz Product Manual RECOMMENDED AMMUNITION: CCI® Blazers 40 grain High Velocity CCI® Mini-Mag 40 grain High Velocity HORNADY® Lead Round Nose 40 grain AGUILA® Super Extra Copper-Plated 40 grain High Velocity Many other High Velocity 40 grain Round Nose Ammunition Do NOT use Hyper Velocity Ammunition In conjunction with a Suppressor, Standard Velocity ammunition can also work INFORMATIONS Compatible with Glock® 17, 22, 31, 34, 35, 37 GEN1-4 Frames Compatible with SCT Manufacturing 17 GEN3 Full Size Frames Compatible with Glock® and Aftermarket Sights Included 10 round Magazine Included 1/2-28 UNEF Barrel Thread Protector Included C.I.P. AT - Category B Compatible suppressors and accessories see under this article, accessoriesMADE IN THE USA DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Tactical Solutions, nor this site is affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.

  The 10 Round .22 LR magazine, specially designed for use with TacSol TSG-22 Glock® conversions, ensuring smooth and reliable performance.   SPECS: Compatible only with TacSol TSG-22 Glock® conversions kits 10 round Capacity Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Tactical Solutions, nor this site is affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.

  The TSG-22 CONVERSION is a premium quality and highly accurate .22 LR barrel and receiver conversion for GLOCK® Pistols and is complete made from solid 4140 steel. Our threaded Barrel configuration in 1/2-28 UNEF allows the installation of a suppressor.  The TSG-22 quickly and easily converts Generations 1 through 4 of the Glock® models 19/23* into an accurate .22LR pistol. This conversion maintains a similar weight and feel to your factory Glock® pistol, allowing for cost effective shooting and training. Each conversion undergoes a nitride surface treatment to increase wear resistance, inhibit corro[1]sion, and reduce friction. Our TSG-22® conversion features factory Glock® sights and includes one TacSol® 10-round polymer magazine. There are 2 recoil buffers included with your TSG-22. The correct buffer for Glocks® Gen 1-3 is installed on the conversion unit ( marked G3). For Gen 4 Glocks®, you will find a second buffer in your box with a laser marking of G4. If you have a Gen 4 Glock®, remove the Gen 3 buffer installed on the conversion unit and install the G4 buffer unit.  Transform your GLOCK® 17 into a cost-effective .22LR pistol with the TacSol TSG-22 conversion kit. Crafted from solid 4140 steel, this conversion maintains the weight and feel of your factory GLOCK, providing a realistic shooting experience at a fraction of the cost. For best results with your TSG-22 .22LR conversion use high velocity ammunition with a 40 grain round nose bullet. We do NOT recommend the use of Hypervelocity ammunition. Easy disassembly: While holding the slide slightly rearward, press the barrel rearward from the muzzle, then proceed with the Glock® removal process as usual. SPECS: TSG-22 GEN3 Conversion Kit Barrel Diameter: 14,0 mm Chamber: .22LR Polished Feed Ramp Barrel thread: 1/2-28 UNEF Twist: 1:16” Barrel Length: 4.3″ Weight: 12.4 oz Product Manual RECOMMENDED AMMUNITION: CCI® Blazers 40 grain High Velocity CCI® Mini-Mag 40 grain High Velocity HORNADY® Lead Round Nose 40 grain AGUILA® Super Extra Copper-Plated 40 grain High Velocity Many other High Velocity 40 grain Round Nose Ammunition Do NOT use Hyper Velocity Ammunition In conjunction with a Suppressor, Standard Velocity ammunition can also work INFORMATIONS Compatible with Glock® 19, 23, 32, 38 GEN1-4 Frames Compatible with SCT Manufacturing 19 GEN3 Compact Size Frames Compatible with Anderson Manufacturing Kiger Frames Compatible with Glock® and Aftermarket Sights Included 10 round Magazine Included 1/2-28 UNEF Barrel Thread Protector Included C.I.P. AT - Category B Compatible suppressors and accessories see under this article, accessories MADE IN THE USA DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Tactical Solutions, nor this site is affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.