Wechselsysteme Kurzwaffen

The FX945U is compatible with both Colt SMG and Glock Mag lower receivers and works with most binary triggers. Specs: Caliber 9mm Luger / 9x19Faxon 4.5" Light Tapered BarrelMuzzle Thread: 1/2-28 UNEFFaxon Enhanced Lightweight GEN2 Forged Upper ReceiverDust CoverMIDWEST INDUSTRIES 4.5" Combat Rail M-LOK® HandguardFaxon GEN2 9mm Glock/Colt SMG Auto Bolt Carrier Group9mm CompensatorTested Lower: ROCK RIVER ARMS – Glock or Colt SMG, ANGSTADT ARMS, ANDERSON, AERO PRECISION Glock® 9mm Lower ReceiverLRBHO function, depending on the choice of lower receiver or magazine adapter used INFORMATIONS Total Lenght with Standard M4 9mm Lower 50,5 - 58,5 cmAT - Category B with 20rd magazineIncluded C.I.P.Compatible accessories see under this article, accessories

  The Maxim Defense PDX-SCW™ U.R.G. is compatible with most common AR-15 lowers when used with a SCW stock or SCW brace. The Maxim Defense PDX™ U.R.G. is built to handle the fierce demands of the Tier 1 community and designed to install on any Mil-Spec lower receiver. With the PDX™ U.R.G, you dominate close-quarter encounters and achieve maximum energy on target without sacrificing accuracy at distance. At just 14” in overall length and a 5.5” barrel, the PDX™ U.R.G. is the ultimate choice for when concealment and personal defense is non-negotiable. The PDX™ U.R.G. is also equipped with Maxim’s HATEBRAKE™ Muzzle Booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses and concussion waves downrange away from the operator improving overall execution. The PDX U.R.G. uses a Direct Impingement system. U.R.G. FEATURES: MAXIM DEFENSE Hatebrake™installed under handguard MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle Ambidextrous Handguard QD Steel Interfaces M-LOK® compatible Handguard Internal Suppressor Compatibility Lightweight Upper Receiver Military grade materials Fully floated barrel Shortest overall length of any Sub-Compact Weapon FUNCTIONS: Optimized Personal Defense Weapon Upper Increased reliability due to included HATEBRAKE Proprietary integrated buffer-carrier with Nickel Boron MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD Duramag, Lancer Systems etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : 5.56 NATO / .223 REM Barrel Thread Pitch :1/2-28 UNEF SCW™ H3 Buffer SCW™ Spring Material Compisition : 6Al-4V Titanium, 17-4 Stainless Steel, 7075 and 6061 Aluminum Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing ARID Barrel Length : 5.5” [139.7mm] Overall Length : 14.0" Maximum Suppressor Diameter: 43,0mm Weight : 4lbs Compatibility Compatible with AR-15 Mil-Spec Lower Receivers in conjunction with a Maxim Defense SCW stock or SCW brace system Compatible with Maxim Defense models with a SCW stock or SCW brace system May not be compatible with AR-15 Lower Receivers from „European manufacturers“ (AT, DE, CZ etc.) INFORMATIONS AT - Category B Including C.I.P. Laser markings were carried out covertly Compatible firearms, suppressors and accessories see under this article, accessories MADE IN THE USA

  The Maxim Defense PDX-SCW™ U.R.G. is compatible with most common AR-15 lowers when used with a SCW stock or SCW brace. The Maxim Defense PDX™ U.R.G. is built to handle the fierce demands of the Tier 1 community and designed to install on any Mil-Spec lower receiver. With the PDX™ U.R.G, you dominate close-quarter encounters and achieve maximum energy on target without sacrificing accuracy at distance. At just 14” in overall length and a 5.5” barrel, the PDX™ U.R.G. is the ultimate choice for when concealment and personal defense is non-negotiable. The PDX™ U.R.G. is also equipped with Maxim’s HATEBRAKE™ Muzzle Booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses and concussion waves downrange away from the operator improving overall execution. The PDX U.R.G. uses a Direct Impingement system. U.R.G. FEATURES: MAXIM DEFENSE Hatebrake™installed under handguard MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle Ambidextrous Handguard QD Steel Interfaces M-LOK® compatible Handguard Internal Suppressor Compatibility Lightweight Upper Receiver Military grade materials Fully floated barrel Shortest overall length of any Sub-Compact Weapon FUNCTIONS: Optimized Personal Defense Weapon Upper Increased reliability due to included HATEBRAKE Proprietary integrated buffer-carrier with Nickel Boron MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD Duramag, Lancer Systems etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : 5.56 NATO / .223 REM Barrel Thread Pitch :1/2-28 UNEF SCW™ H3 Buffer SCW™ Spring Material Compisition : 6Al-4V Titanium, 17-4 Stainless Steel, 7075 and 6061 Aluminum Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing Black Barrel Length : 5.5” [139.7mm] Overall Length : 14.0" Maximum Suppressor Diameter: 43,0mm Weight : 4lbs Compatibility Compatible with AR-15 Mil-Spec Lower Receivers in conjunction with a Maxim Defense SCW stock or SCW brace system Compatible with Maxim Defense models with a SCW stock or SCW brace system May not be compatible with AR-15 Lower Receivers from „European manufacturers“ (AT, DE, CZ etc.) INFORMATIONS AT - Category B Including C.I.P. Laser markings were carried out covertly Compatible firearms, suppressors and accessories see under this article, accessories MADE IN THE USA

  The Maxim Defense PDX-SCW™ U.R.G. is compatible with most common AR-15 lowers when used with a SCW stock or SCW brace. The Maxim Defense PDX™ U.R.G. is built to handle the fierce demands of the Tier 1 community and designed to install on any Mil-Spec lower receiver. With the PDX™ U.R.G, you dominate close-quarter encounters and achieve maximum energy on target without sacrificing accuracy at distance. At just 14” in overall length and a 5.5” barrel, the PDX™ U.R.G. is the ultimate choice for when concealment and personal defense is non-negotiable. The PDX™ U.R.G. is also equipped with Maxim’s HATEBRAKE™ Muzzle Booster. This patent-pending device significantly reduces recoil, decreases the flash signature, pushes gasses and concussion waves downrange away from the operator improving overall execution. The PDX U.R.G. uses a Direct Impingement system. U.R.G. FEATURES: MAXIM DEFENSE Hatebrake™installed under handguard MAXIM DEFENSE SCW™ BCG System MAXIM DEFENSE M-RAX™ Hand Stop Kit RADIAN Raptor® Ambidextrous Charging Handle Ambidextrous Handguard QD Steel Interfaces M-LOK® compatible Handguard Internal Suppressor Compatibility Lightweight Upper Receiver Military grade materials Fully floated barrel Shortest overall length of any Sub-Compact Weapon FUNCTIONS: Optimized Personal Defense Weapon Upper Increased reliability due to included HATEBRAKE Proprietary integrated buffer-carrier with Nickel Boron MIL-SPEC bolt Receives all USGI pattern magazines, Magpul PMAG, CPD Duramag, Lancer Systems etc. MIL-SPEC+ coatings and materials Fully and easily serviceable Disassembles with standard tools TECHNICAL SPECIFICATION Action: Factory Semi-Auto Production Caliber : .300 AAC Blackout Barrel Thread Pitch : 5/8-24 UNEF SCW™ H1 Buffer SCW™ Spring Material Compisition : 6Al-4V Titanium, 17-4 Stainless Steel, 7075 and 6061 Aluminum Barrel Material : 4150 CrMoV Finish : Manganese Phosphate / Nitride / Type III Mil-Spec Anodizing Black Barrel Length : 5.5” [139.7mm] Overall Length : 14.0" Maximum Suppressor Diameter: 43,0mm Weight : 4lbs Compatibility Compatible with AR-15 Mil-Spec Lower Receivers in conjunction with a Maxim Defense SCW stock or SCW brace system Compatible with Maxim Defense models with a SCW stock or SCW brace system May not be compatible with AR-15 Lower Receivers from „European manufacturers“ (AT, DE, CZ etc.) INFORMATIONS AT - Category B Including C.I.P. Laser markings were carried out covertly Compatible firearms, suppressors and accessories see under this article, accessories MADE IN THE USA

  Don’t build a .22 LR that looks like an AR, build an AR that happens to be chambered in .22 LR. Equipped with a 4.5” barrel, the shortest CMMG® offers in any caliber, this BANSHEE™ upper group is built on the Mk4 platform, and is designed to work with any standard AR15 Mil-Spec Lower group and use .22 AR Conversion Mags. Available in six different Cerakote finishes, all CMMG® Upper Groups come complete with bolt carrier group and ZEROED™ accessories including: ZEROED AR15 Polymer Dust Cover ZEROED .22LR Ambi Charging Handle ZEROED .22LR Flash Hider NO MAGAZINE Optional Accessories: For compatible Magazines and accessories, see under this article, accessories PLATFORM MK4 / AR-15 CALIBER .22 LR OPERATING SYSTEM TRADITIONAL BLOWBACK BARREL LENGTH 4.5 BARREL TWIST 1:16 BARREL CONTOUR MT BARREL MATERIAL 4140CM, SBN BARREL TWIST 1:16 MUZZLE DEVICE CMMG ZEROED FLASH HIDER MUZZLE THREAD 1/2 X 28 GAS PORT LOCATION N/A GAS BLOCK N/A UPPER RECEIVER BILLET 6061 T6 ALUMINUM HAND GUARD CMMG EML4 M-LOK FINISH CERAKOTE ARMOR BLACK CHARGING HANDLE CMMG ZEROED AMBI WEIGHT 2.2 LBS LENGTH 12.8"   Informations: C.I.P. included Laser markings were carried out covertly MADE IN THE USA

  MEET THE NEW WAR Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.  A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp  Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 9" Barrel 1/7 Twist M4 Feed Ramp Extension .300 AAC Blackout Chrome Lined Bore and Chamber Pistol Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 5/8-24 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 8" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS   Included BCM Bolt Carrier Group Included BCM Flash Hider, non pinned or welded Included BCM MK2 Ambidextrous Charging Handle - Large Latch Included BCM 3" M-LOK Picatinny Rail Section  Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B  Compatible accessories, see under this article, accessories MADE IN THE USA

  About the BCM® Standard 7" 300 BLACKOUT Complete Upper Receiver w/ MCMR-5 Handguard Continuous taper barrel profile designed for optimal weight, balance, and performance. Tapered barrel profile out front, for easier maneuverability. No sharp handguard cap shoulder for improved barrel harmonics and improved accuracy. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® AR15 UPPER RECEIVER Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp  Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 7" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome Lined Bore and Chamber Pistol Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 5/8-24 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® has taken great care to ensure the best possible performance and interchangeability. However, due to the large operational range of 300 Blackout ammunition in the market place, BCM® cannot guarantee function will all ammunition types in all conditions. These barrels were designed to run High Velocity ammo only with a H3 buffer. Fine tuning may be required in limited instances based on ammo and buffer choices that work best for the desired application. BCM® also recommends running the Crane O-ring (provided with all BCM® Bolt Carrier Groups) over the extractor with 300 Blackout. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 5" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS Included BCM Flash Hider, NON pinned or welded Included BCM MK2 Ambidextrous Charging Handle - Large Latch Included BCM 3" M-LOK Picatinny Rail Section Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B  Compatible accessories, see under this article, accessoriesMADE IN THE USA

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Fluted Barrel with Target recessed Crown Serrated Breech Block Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Rainbow PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: Rainbow PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: TiN Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: DLC Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Threaded Barrel 1/2-28 UNEF Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Chameleon PVD Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  ANDERSON Glock® 19 Custom Barrel, made from 416R Stainless Steel. DETAILS Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: TiN Caliber: 9X19 Twist: 1:10 C.I.P. included Compatible with Glock® 19 Gen1-5 models Laser markings were carried out covertly Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Rainbow PVD Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel 1/2-28 UNEF Threaded Barrel  Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: DLC Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: TiN Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Fluted Barrel with Target recessed Crown Serrated Breech Block Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  The TSG-22 CONVERSION is a premium quality and highly accurate .22 LR barrel and receiver conversion for GLOCK® Pistols and is complete made from solid 4140 steel. Our threaded Barrel configuration in 1/2-28 UNEF allows the installation of a suppressor.  The TSG-22 quickly and easily converts Generations 1 through 4 of the Glock® models 17/22* into an accurate .22LR pistol. This conversion maintains a similar weight and feel to your factory Glock® pistol, allowing for cost effective shooting and training. Each conversion undergoes a nitride surface treatment to increase wear resistance, inhibit corro[1]sion, and reduce friction. Our TSG-22® conversion features factory Glock® sights and includes one TacSol® 10-round polymer magazine. There are 2 recoil buffers included with your TSG-22. The correct buffer for Glocks® Gen 1-3 is installed on the conversion unit ( marked G3). For Gen 4 Glocks®, you will find a second buffer in your box with a laser marking of G4. If you have a Gen 4 Glock®, remove the Gen 3 buffer installed on the conversion unit and install the G4 buffer unit.  Transform your GLOCK® 17 into a cost-effective .22LR pistol with the TacSol TSG-22 conversion kit. Crafted from solid 4140 steel, this conversion maintains the weight and feel of your factory GLOCK, providing a realistic shooting experience at a fraction of the cost. For best results with your TSG-22 .22LR conversion use high velocity ammunition with a 40 grain round nose bullet. We do NOT recommend the use of Hypervelocity ammunition. Easy disassembly: While holding the slide slightly rearward, press the barrel rearward from the muzzle, then proceed with the Glock® removal process as usual. SPECS: TSG-22 GEN3 Conversion Kit  Barrel Diameter: 14,0 mm Chamber: .22LR Polished Feed Ramp Barrel thread: 1/2-28 UNEF Twist: 1:16” Barrel Length: 4.8″ Weight: 13 oz Product Manual RECOMMENDED AMMUNITION: CCI® Blazers 40 grain High Velocity CCI® Mini-Mag 40 grain High Velocity HORNADY® Lead Round Nose 40 grain AGUILA® Super Extra Copper-Plated 40 grain High Velocity Many other High Velocity 40 grain Round Nose Ammunition Do NOT use Hyper Velocity Ammunition In conjunction with a Suppressor, Standard Velocity ammunition can also work INFORMATIONS Compatible with Glock® 17, 22, 31, 34, 35, 37 GEN1-4 Frames Compatible with SCT Manufacturing 17 GEN3 Full Size Frames Compatible with Glock® and Aftermarket Sights Included 10 round Magazine Included 1/2-28 UNEF Barrel Thread Protector Included C.I.P. AT - Category B Compatible suppressors and accessories see under this article, accessoriesMADE IN THE USA DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Tactical Solutions, nor this site is affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.