ZEROTECH Thrive™ HD Reflex Red Dot Sight - Low

  High End Custom Pistole von SHADOW SYSTEMS USA  Hochwertigste Verarbeitung aller Bauteile, alle Glock Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung, Auslieferung mit SS Premium Range Bag. The MR920 is a feature-packed, compact-sized pistol that is designed to work with existing GLOCK® 19 holsters, magazines, and gear. The MR920’s frame features configurable ergonomics. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. An extended beavertail and aggressive trigger guard undercut work to dramatically reduce recoil and increase controllability. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The MR920 slide has a thinned profile at grasping locations and directional serrations in the front and rear (as well as topside on some models) for easy manipulation under stress. The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris. MR920s are also available with threaded barrels, for those departments that allow the use of muzzle devices. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-1611 UPC: 810013434316 Caliber: 9X19 Weight: 20.9 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Bronze TiCN Front Sight Type: Tritium, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

   High End Custom Pistol from SHADOW SYSTEMS USA The MR920 is a feature-packed, compact-sized pistol that is designed to work with existing GLOCK® 19 holsters, magazines, and gear. The MR920’s frame features configurable ergonomics. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. An extended beavertail and aggressive trigger guard undercut work to dramatically reduce recoil and increase controllability. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The MR920 slide has a thinned profile at grasping locations and directional serrations in the front and rear (as well as topside on some models) for easy manipulation under stress. The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris. MR920s are also available with threaded barrels, for those departments that allow the use of muzzle devices. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.  Details: MR920 Combat, Dovetail Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-1001 UPC: 810013431513 Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Bronze TiCN Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  INCREASED SIGHT RADIUS FOR BETTER ACCURACY AND LESS RECOIL High End Custom Pistole von SHADOW SYSTEMS USA  Hochwertigste Verarbeitung aller Bauteile, alle Glock Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung, Auslieferung mit SS Premium Range Bag. The long-slide MR920L is built on the compact-sized MR920 frame. The MR920L has noticeably less muzzle rise than the MR920. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. When paired with the extended beavertail and aggressive trigger guard undercut, the MR920L offers optimal recoil control. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The full-length MR920L slide features directional serrations in the front, rear, and topside, a weight-optimized window cut, and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted to improve evacuation of debris, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. The MR920L Elite features a patent-pending optic cut that allows shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920L can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22 oz. Lenght: 7 9/16 inches Height: 4 3/4 nches Barrel: 5 inches, 1/2-28 UNEF threaded Barrel Finish: Bronze TiCN Front Sight Type: Tritium green, black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA The MR920 is a feature-packed, compact-sized pistol that is designed to work with existing GLOCK® 19 holsters, magazines, and gear. The MR920’s frame features configurable ergonomics. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. An extended beavertail and aggressive trigger guard undercut work to dramatically reduce recoil and increase controllability. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The MR920 slide has a thinned profile at grasping locations and directional serrations in the front and rear (as well as topside on some models) for easy manipulation under stress. The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris. MR920s are also available with threaded barrels, for those departments that allow the use of muzzle devices. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.  Details: MR920 Combat, Dovetail Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-1601 UPC: 810013434231 Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Bronze TiCN Front Sight Type: Black Rear Sight Type: Black, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Thread Pitch: 1/2-28 UNEF Part Number: SS-2609 UPC: 8810013435313 Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/4 inches Height: 5 1/4 inches Barrel: 5 inches (threaded) Barrel Finish: Bronze TiCN Front Sight Type: Black, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK: MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Thread Pitch: 1/2-28 UNEF Part Number: SS-2610 UPC: 810013435320 Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/4 inches Height: 5 1/4 inches Barrel: 5 inches (threaded) Barrel Finish: Black Nitride Front Sight Type: Black, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK: MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-2611 UPC: 810013435337 Caliber: 9X19 Weight: 22.2 oz. Lenght: 7 1/4 inches Height: 5 1/4 inches Barrel: 4 1/2 inches (unthreaded) Barrel Finish: Bronze TiCN Front Sight Type: Tritium, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK: MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-2611 UPC: 810013435337 Caliber: 9X19 Weight: 22.2 oz. Lenght: 7 1/4 inches Height: 5 1/4 inches Barrel: 4 1/2 inches (unthreaded) Barrel Finish: Black Nitride Front Sight Type: Black, Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

Specifications: Fits all CR920 models, Enhanced Version COMPATIBILITY: ***NOTE: Fits CR920X/XP/XL & CR920 only! NOT compatible with GLOCK or other manufacture firearms.***

Shadow Systems extractors are among the toughest, most fracture resistant extractors in the world. With hundreds of thousands of our extractors in the wild, we can count on one hand the number of times we have seen one break. The CR920 extractor features the following: Improved claw geometry for consistent 3 o’clock ejection and no brass to the faceHigher dimensional consistencyEnhanced LCI area for greater feedback by feel COMPATIBILITY: Compatible with CR920X/XP/XL & CR920 models only!Compatible with G43, G48, and G43X.*** NOT compatible with other GLOCK models or other manufacture firearms.*** DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. "GLOCK" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Midwest Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of parts and components that are compatible with GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

The extractor depressor plunger assembly is located in the rear of the slide and tensions the extractor.  This is the assembly which is used in the manufacture of CR pistols. COMPATIBILITY: Compatible only with CR920 models WITHOUT Optic Cut!NOT compatible with CR920 models WITH an Optic Cut!NOT compatible with GLOCK models or other manufacture firearms.

Upgrade your carry with the new CR920X magazine! Designed for maximum performance and reliability in a compact package. Shadow Systems is now offering the new CR920 Magazine Sleeve. This sleeve will allow you to use the CR920X Magazine to make the CR920 grip longer. This is the solution for those who want to utilize the CR920X magazine on the CR920.The sleeve fits tightly on the magazine and against the frame for a stable one-piece feel.If you are looking to maximize the capacity of the CR, this accessory is for you! * Magazine NOT included. The correct CR920 magazine you can find under this article, accessories.

Upgrade your carry with the new CR920X magazine! Designed for maximum performance and reliability in a compact package. Specifications: Fits all CR920 models (note: extends below the grip on the standard CR920 but does not impede function)Ideal 15-round reload for everyday carry. CUSTOMIZE YOUR LOADOUT: A grip sleeve to provide full grip in the CR920 is available here, CR920 Magazine Sleeve (CR920X Magazine) – Shadow Systems)+1 magazine extension, CR Magazine +1 Extension (11-Round) – Shadow Systems+3 magazine extension, CR920X Magazine +3 Extension (18-Round) – Shadow Systems BUILT FOR RELIABILITY: Our engineers chose to use magazine springs far stronger than those found in competing designs. This spring power provides extra insurance with a wide range of bullet weights and in compromised firing positions or when the gun is dirty. We spared no expense on the quality of the magazine by incorporating a premium, ultra-slick nickel Teflon finish. COMPATIBILITY: ***NOTE: Fits CR920X/XP/XL & CR920 only! This magazine is NOT compatible with GLOCK or other manufacture firearms.***

  High End Custom Pistole from SHADOW SYSTEMS USA  BUILT IN COMPENSATION FOR AN UNBELIEVEABLY FLAT SHOOTING EXPERIENCE THE PERFORMANCE DR920P The DR920P is a full sized, 17+1 pistol with an integrated compensator built into the barrel. The built-in compensator does not make use of a threaded barrel, making the DR920P compliant in many jurisdictions that have threaded-barrel-bans. The DR920P’s comp and slide are machined to give a single-piece appearance, while the novel design allows for rapid removal and attachment of the comp for cleaning. The patent-pending integrated compensator aligns automatically without the need for set screws or other friction devices. The DR920P’s front sight is mounted directly on top of the comp, for faster shot-to-shot tracking. The DR920P, which fits G34 holsters, comes complete with features customers have come to expect from Shadow Systems, including an aggressively textured frame with interchangeable backstraps that adjust the point of aim, an extended beavertail, and a textured recoil control ledge. The drop-safe and carry-safe flat faced trigger has a 4.5-5 lbs pull weight with a crisp, tactile reset. The match-grade, spiral-fluted barrel features the patent-pending comp attachment system, which utilizes an easy-to-detach pin system to mount the compensator. The DR920P is offered with the Elite model slide, which includes front and rear directional serrations, a weight-optimizing window cut, and Shadow Systems’ patented multi-footprint optic system. The optic cut allows for direct-to-slide mounting of most major brands of red dot optics, without the need for intervening plates or adapters. A green tritium front sight is mounted directly on the built-in compensator and is paired with a blacked out serrated rear sight. The DR920P fits Gen 4 G34 holsters. Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS ZEROTECH, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920P Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 8.44 inches Height: 5.25 inches Barrel: 4.50 inches   Barrel Finish: Black Nitride Barrel: Compensated Front Sight Type: TRITIUM, Green Rear Sight: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessories Informations: C.I.P. included Laser markings were carried out covertlyMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-3609-T UPC: 810013438833 Caliber: 9X19 Weight: 20.0 oz. Lenght: 7 7⁄8 inches Height: 5 1⁄4 inches Barrel: 5 1⁄2 inches (threaded) Thread Pitch: 1/2-28 UNEF Barrel Finish: Bronze TiCN Front Sight Type: Tritium, Green Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Part Number: SS-3610-T UPC: 810013438840 Caliber: 9X19 Weight: 20.0 oz. Lenght: 7 7⁄8 inches Height: 5 1⁄4 inches Barrel: 5 1⁄2 inches (threaded) Thread Pitch: 1/2-28 UNEF Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Glock® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 19.2 oz. Lenght: 7 3⁄8 inches Height: 5 1⁄4 inches Barrel: 4 inches  Barrel Finish: Bronze TiCN Front Sight Type: TRITIUM, Green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS Zerotech: Thrive, Thrive Micro // Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 19.2 oz. Lenght: 7 3⁄8 inches Height: 5 1⁄4 inches Barrel: 4 inches  Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  EXCELLENCE AT THE CORE  Nothing great can be built without a solid foundation. The FOUNDATION SERIES by Shadow Systems developed out of conversations between old-school gun guys, the type who aren’t fussy about aesthetics and want only the essential features. Built on the same frames as all Shadow Systems pistols, the FOUNDATION SERIES touts sleek ergonomics, real-world shootability, and bet-your-life reliability. Hochwertigste Verarbeitung aller Bauteile, alle Glock® Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung.  TESTED OPTIC MODELSSIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 with Optic Cut FS: FOUNDATION SERIES OR: OPTIC READY  Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Nitride Front Sight Type: White Dot Rear Sight: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Compatible accessories see under this article, accessoriesMADE IN THE USA

  EXCELLENCE AT THE CORE  Nothing great can be built without a solid foundation. The FOUNDATION SERIES by Shadow Systems developed out of conversations between old-school gun guys, the type who aren’t fussy about aesthetics and want only the essential features. Built on the same frames as all Shadow Systems pistols, the FOUNDATION SERIES touts sleek ergonomics, real-world shootability, and bet-your-life reliability. Hochwertigste Verarbeitung aller Bauteile, alle Glock® Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung.  TESTED OPTIC MODELSSIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 with Optic Cut FS: FOUNDATION SERIES OR: OPTIC READY  Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/4 inches Height: 5 1/4 nches Barrel: 4,5 inches (unthreaded) Barrel Finish: Nitride Front Sight Type: White Dot Rear Sight: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Compatible accessories see under this article, accessoriesMADE IN THE USA

  EXCELLENCE AT THE CORE  Nothing great can be built without a solid foundation. The FOUNDATION SERIES by Shadow Systems developed out of conversations between old-school gun guys, the type who aren’t fussy about aesthetics and want only the essential features. Built on the same frames as all Shadow Systems pistols, the FOUNDATION SERIES touts sleek ergonomics, real-world shootability, and bet-your-life reliability. Hochwertigste Verarbeitung aller Bauteile, alle Glock® Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung.  TESTED OPTIC MODELSSIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 with Optic Cut FS: FOUNDATION SERIES OR: OPTIC READY  Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/8 inches Height: 5 1/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Nitride Front Sight Type: White Dot Rear Sight: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Compatible accessories see under this article, accessoriesMADE IN THE USA

   INCREASED SIGHT RADIUS FOR BETTER ACCURACY AND LESS RECOIL High End Custom Pistole von SHADOW SYSTEMS USA  Hochwertigste Verarbeitung aller Bauteile, alle Glock Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung, Auslieferung mit SS Premium Range Bag. The long-slide MR920L is built on the compact-sized MR920 frame. The MR920L has noticeably less muzzle rise than the MR920. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. When paired with the extended beavertail and aggressive trigger guard undercut, the MR920L offers optimal recoil control. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The full-length MR920L slide features directional serrations in the front, rear, and topside, a weight-optimized window cut, and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted to improve evacuation of debris, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. The MR920L Elite features a patent-pending optic cut that allows shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920L can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22 oz. Lenght: 7 9/16 inches Height: 4 3/4 nches Barrel: 5 inches, 1/2-28 UNEF threaded Barrel Finish: Black Nitride Front Sight Type: Tritium green, black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

   INCREASED SIGHT RADIUS FOR BETTER ACCURACY AND LESS RECOIL High End Custom Pistole von SHADOW SYSTEMS USA  Hochwertigste Verarbeitung aller Bauteile, alle Glock Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung, Auslieferung mit SS Premium Range Bag. The long-slide MR920L is built on the compact-sized MR920 frame. The MR920L has noticeably less muzzle rise than the MR920. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. When paired with the extended beavertail and aggressive trigger guard undercut, the MR920L offers optimal recoil control. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The full-length MR920L slide features directional serrations in the front, rear, and topside, a weight-optimized window cut, and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted to improve evacuation of debris, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. The MR920L Elite features a patent-pending optic cut that allows shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920L can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21 oz. Lenght: 7 9/16 inches Height: 4 3/4 nches Barrel: 4,5 inches Barrel Finish: Bronze TiCN Front Sight Type: Tritium green, black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

   INCREASED SIGHT RADIUS FOR BETTER ACCURACY AND LESS RECOIL High End Custom Pistole von SHADOW SYSTEMS USA  Hochwertigste Verarbeitung aller Bauteile, alle Glock Zubehörteile und Magazine kompatibel, passende Red-Dots siehe Artikelbeschreibung, Auslieferung mit SS Premium Range Bag. The long-slide MR920L is built on the compact-sized MR920 frame. The MR920L has noticeably less muzzle rise than the MR920. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. When paired with the extended beavertail and aggressive trigger guard undercut, the MR920L offers optimal recoil control. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The full-length MR920L slide features directional serrations in the front, rear, and topside, a weight-optimized window cut, and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted to improve evacuation of debris, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. The MR920L Elite features a patent-pending optic cut that allows shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920L can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS SIGHTMARK MINI SHOT A-SPEC M3, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920 Elite with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21 oz. Lenght: 7 9/16 inches Height: 4 3/4 nches Barrel: 4,5 inches Barrel Finish: Black Nitride Front Sight Type: Tritium green, black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution. MOUNT COMPATIBILITY: 1913 Picatinny (See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)RED DOT COMPATIBILITY:-Aimpoint Micro Standard-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights WARNING:-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating-Be careful and use your best judgment on which hardware to use for your specific setup-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screwPRODUKTVIDEOMONTAGEVIDEO MADE IN THE USA

  The Strike Industries G.U.M. Universal (Optics) Mount for GLOCK™ V2 is now available! This mount has been updated to allow additional compatibility with even more red dots on the market. Its minimal super low-profile design offers a sleek appearance with our patented SI Multi-Optic Mount pattern which accommodates most Mini/Micro Red Dot Sights (MRDS). COMPATIBILITY: For GLOCK™ GEN1-5 G17/G19/G20/G21/G22/G23/G24/G26/G27/G29/G30/G31/G32/G33/G34/G35/G36/G37/G38/G39/G40/G41/G44/G45/G47 NOT COMPATIBLE: GLOCK™ G42/G43/G43x/G48  (See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)RED DOT COMPATIBILITY: C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights  Product Features:-Minimal super low-profile design-SI Multi-Optic Mount fits most Mini/Micro Red Dot Sights (MRDS) in the market-No permanent milling or custom work required on slide-Included mounting posts and screws offer versatility for various red dot sights-Lowest height-over-bore mount in the industry-Solid S45C steel construction and black phosphate finish Package Contents:-x1 G.U.M. Universal (Optics) Mount for GLOCK™ Version 2-x8 G.U.M. mount set screw [M3x3mm 2.5mm Socket]-x3 Screw [M3x8mm T10 Flat]-x3 Screw [M3x9mm T10 Flat]-x3 Screw [M3x10mm T10 Flat]-x3 Screw [M3x8mm T14 Flat]-x3 Screw [M3x8mm T15 Flat]-x3 Screw [M3x7mm T10 Rounded]-x3 Screw [M3x8mm T10 Rounded]-x3 Screw [M3x10mm T10 Rounded]-x3 Screw [M3x10mm T11 Rounded]-x5 Large mounting post-x5 Small mounting post-x5 Shallow mounting post-x3 Tall mounting post-x1 Torx tool [T10]-x1 Hex tool [1.5mm]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card WARNING:-There is a risk of marking your slide when properly securing this mount-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating-Be careful and use your best judgment on which hardware to use for your specific setup-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests -LENGTH: 48.50mm(1.91'')-WIDTH: 28.45mm(1.12'')-HEIGHT: 6.10mm(0.24'')-WEIGHT: 1.30 oz-WEIGHT W/ PKG: X.XX oz WARNING:-The below compatibility list is based on known SI test fitments as well as footprint data found online but do not guarantee 100% the full list is accurate-Please note there is also other possible red dot brand and model fitments that can work-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating-Be careful and use your best judgment on which hardware to use for your specific setup-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests-There is a risk of marking your slide when properly securing this mount -C-MORE STANDARD: (+ additional C-MORE Standard footprint optics not listed here) C-MORE SYSTEMS: Screw: x2 M3x10mm Rounded Mounting Post: x2 Small SIG SAUER: ROMEO3MAX/3XL Screw: x2 M3x10mm Rounded Mounting Post: x2 Small VORTEX OPTICS: RAZOR RED DOT Screw: x2 M3x11mm Rounded Mounting Post: x2 Small -DELTAPOINT PRO STANDARD: (+ additional DeltaPoint Pro Standard footprint optics not listed here) EOTECH: EFLX MINI REFLEX SIGHT (MRS) Screw: x2 M3x8mm Rounded Mounting Post: x2 Large LEUPOLD: DELTAPOINT PRO Screw: x2 M3x15mm Flat Mounting Post: x2 Large SIG SAUER: ROMEO1 Screw: x2 M3x8mm Flat Mounting Post: x2 Tall SIG SAUER: ROMEO1PRO Screw: x2 M3x8mm Flat Mounting Post: x2 Tall SIG SAUER: ROMEO2 Screw: x2 M3x14mm Flat Mounting Post: x2 Large -DOCTER/NOBLEX STANDARD: (+ additional Docter/Noblex Standard footprint optics not listed here) ATIBAL OPTICS: MRD V2/V3 RED DOT SIGHT Screw: x2 M3x8mm Rounded *Mounting Post: x4 Small(*MRD V3 housing mount post holes are taller than small SI mounting posts provided) BURRIS OPTICS: FASTFIRE™ 2 Screw: x2 M3x8mm Flat Mounting Post: x4 Small CRIMSON TRACE: CT RAD™ PRO Screw: x2 M3x8mm Flat Mounting Post: x4 Small PRIMARY ARMS: SLX RS-10 Screw: x2 M3x10mm Flat Mounting Post: x3 Small VORTEX OPTICS: VIPER RED DOT Screw: x2 M3x8mm Flat Mounting Post: x4 Small VORTEX OPTICS: VENOM RED DOT Screw: x2 M3x7mm Rounded Mounting Post: x4 Small -RMR STANDARD: (+ additional RMR Standard footprint optics not listed here) ATIBAL OPTICS: CRD RED DOT SIGHT Screw: x2 M3x8mm Flat Mounting Post: x2 Large HOLOSUN: 407C/507C/508T Screw: x2 M3x8mm Flat Mounting Post: x2 Large HOLOSUN: 509T *Screw: x2 M3x8mm Flat(*use RMR adapter plate provided by Holosun) Mounting Post: x2 Large SWAMPFOX OPTICS: JUSTICE/LIBERTY KINGSLAYER Screw: x2 M3x10mm Flat Mounting Post: x2 Large SWAMPFOX OPTICS: KRAKEN *Screw: x2 M3x6mm Flat(*use RMR adapter plate provided by Swampfox) Mounting Post: x2 Large TRIJICON: RMR/SRO Screw: x2 M3x10mm Flat Mounting Post: x2 Large -SHIELD STANDARD: (+ additional Shield Standard footprint optics not listed here) HOLOSUN: 407K/507K Screw: x2 M3x8mm Flat Mounting Post: x2 Shallow HOLOSUN: EPS CARRY MRS Screw: x2 M3x8mm Flat Mounting Post: Not Compatible SHIELD SIGHTS: AMS/RMS/RMS2/RMSC/ RMSX/SIS/SMS/SMS2/SMSC Screw: x2 M3x8mm Rounded Mounting Post: x2 Large SIG SAUER: ROMEOZERO Screw: x2 M3x8mm Flat Mounting Post: x2 Large SWAMPFOX OPTICS: SENTINEL Screw: x2 M3x9mm Rounded *Mounting Post: x2 Large(*mounting posts only using rear housing mount post holes) DISCLAIMER:This product is not manufactured, authorized, endorsed, or warrantied by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of parts or components for GLOCK pistols. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H parts and accessories visit www.glock.com.

  The R.E.X. Riser is a low profile, lightweight riser for AR platforms. Set at the ideal height for co-witnessing while using the SI Reflex Exoskeleton mount with either A2 height, or Sidewinder sights (without spacer), the R.E.X Riser is versatile and provides and solid mounting platform. While optimized for use with the R.E.X Mount, the universal Picatinny pattern can be used with many other optics that can be mounted on picatinny sections. Package include:- 1x Riser Base- 1x M5x30mm Cap Head Hex Screw- 2x 10x3x.48mm spring- 1x Clamp- 1x Spacer- 1x Riser rail- 4x M3x6mm button head hex screw Features:- Low profile rail riser- Lightweight, 2 0z total installed co-witness height.- Co-witness with A2 or Sidewinder Sight using R.EX Mount- 3 picatinny slot sections Instructions: -Use the included spacer in conjunction with R.E.X Mount for absolute co-witness with A2 height sights. -Use R.E.X Mount with no spacer to co-witness with Sidewinder Sights only.  Note: Medium Strength Loctite Recommended (Included).Note: Uses a proprietary picatinny rail design. Will work for most mil-spec 1913 style rail attachments however. M3 Screw Torque Specs: Do not exceed 10 inch-lbs and only hand tighten by holding onto the short end of the allen key included. M5 Bolt Torque Limit= 25 inch lbs maximum with thread locker.  Product Spec: - Weight: 2 oz- Heights: W/ Spacer- 0.630 inches. W/out Spacer 0.530 inches, Spacer height: 0.100 inches- R.E.X Exoskeleton will add 0.200 inches of height to either combination of the R.E.X Riser- Base: 6061-T6 Al, Requires 5 rail sections of space to properly mount.- Total Length of picatinny riser: 2.09 inches- Spacer: 6061-T6 Al- Clamp: Steel- Screw: Steel Finish:- TIII Hard anodize (BK)MADE IN THE USA

 Custom Striker Fire Pistol from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, fluted barrel and enhanced controls, the Kiger-9c Pro brings added versatility to your everyday carry. No ammo sensitivity, works great with all 9mm ammo manufacturers as well as Subsonic ammo, with or without silencer!   The Kiger-9c Pro is a striker fired, locked-breech, short-recoil operated semi-automatic pistol, chambered in 9mm. This pistol features the Kiger-9c Polymer Frame with its optimized beaver tail, aggressive texturing, undercut trigger guard and forward-under-barrel picatinny rail. The updates on the frame come in the form of enhanced controls, the Pro features an extended magazine and extended slide release. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling. On the top, the Kiger-9c Pro’s slide are the steel, blacked out, suppressor-height front and dovetail rear sight flanking the Ruggedized Miniature Reflex (RMR) pattern optic cut. This pistol features a 416R, 3.91’’ fluted, DLC coated barrel with a recessed crown, chambered in 9mm with a 1:10 twist. Ships with one Magpul™ PMAG 15 GL9, making it's stock capacity 15+1.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Fluted Barrel with Target recessed Crown Serrated Breech Block Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Extended Magazine Release Button Extended Slide Stop Lever Extended Beavertail Picatinny Rail Double Trigger Guard Undercut Aggressive Frame Texturing with detailed Stippling touch Points Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Implied Magwell Extension with Debris Channels Trigger Pull: 5-5.5 lb.  Action: Striker Fire Weight w/ no ammunition: 584g Weight w/ 15+1 loaded: 782g Lenght: 3.91'' inches Width: 1.26'' Height: 5.175'' inches Magazine Capacity: 15+1 Included Magazine: 1 pcs 15-round Magpul® Magazine Included Range Bag Reflex Sight not included Compatible accessories see under this article, accessories MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Polished Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: Rainbow PVD Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel 1/2-28 UNEF Threaded Barrel  Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 4.40 inches Barrel Finish: DLC Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Ported Barrel with Target recessed Crown Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: TiN Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  Custom Slide from ANDERSON. Inspired by the Kiger Mustang, a wild horse breed in North America. With a lightweight skeletonized slide, RMR pattern optic cut, steel suppressor-height sights for Absolute Co-Witness, the Kiger-9c Pro brings added versatility to your everyday carry. The Kiger-9c Pro’s billet slide is manufactured from 416 stainless steel and is DLC (Diamond-Like Carbon) coated. The slide is skeletonized for weight reduction via three ports on either side and one on top, all frontside. The rear sides of the slide feature serrations to optimize handling.  The Kiger-9c is compatible with all GLOCK® 19 Gen3 parts and aftermarket parts, like frame, sights, mags, holsters and other accessories. DETAILS Skeletonized Slide with RMR Cut  Slide Material: 416R Stainless Steel Fluted Barrel with Target recessed Crown Serrated Breech Block Barrel Outside Geometry: Gen5 Barrel Material: 416R Stainless Steel Barrel Lenght: 3.91 inches Barrel Finish: DLC Slide Finish: DLC Caliber: 9X19 Twist: 1:10 Chamber-Loaded Indicator Black Serrated Suppressor-height sights for Absolute Co-Witness with Red-Dot Compatibel to GLOCK® 19 Gen3 and SHADOW SYSTEMS MR/XR Frames Compatible accessories see under this article, accessories Informations: Included C.I.P. Laser markings were carried out covertly MADE IN THE USA DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Anderson Manufacturing nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

High End Custom Pistol from SHADOW SYSTEMS USA The MR920 is a feature-packed, compact-sized pistol that is designed to work with existing GLOCK® 19 holsters, magazines, and gear. The MR920’s frame features configurable ergonomics. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. An extended beavertail and aggressive trigger guard undercut work to dramatically reduce recoil and increase controllability. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The MR920 slide has a thinned profile at grasping locations and directional serrations in the front and rear (as well as topside on some models) for easy manipulation under stress. The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris. MR920s are also available with threaded barrels, for those departments that allow the use of muzzle devices. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.  Details: MR920 Combat, Dovetail Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA The MR920 is a feature-packed, compact-sized pistol that is designed to work with existing GLOCK® 19 holsters, magazines, and gear. The MR920’s frame features configurable ergonomics. Interchangeable backstraps allow shooters to adjust the grip angle to fit their natural point of aim. An extended beavertail and aggressive trigger guard undercut work to dramatically reduce recoil and increase controllability. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The MR920 slide has a thinned profile at grasping locations and directional serrations in the front and rear (as well as topside on some models) for easy manipulation under stress. The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris. MR920s are also available with threaded barrels, for those departments that allow the use of muzzle devices. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.  Details: MR920 Combat, Dovetail FDE Cerakote Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 1/8 inches Height: 4 3/4 nches Barrel: 4 inches (unthreaded) Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 15+1 Magazine: 15-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS ZEROTECH Thrive™, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Combat with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Thread Pitch: 1/2-28 UNEF Caliber: 9X19 Weight: 23.0 oz. Lenght: 7 3/4 inches Height: 5 1/4 inches Barrel: 5 inches (threaded) Barrel Finish: Bronze TiCN Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS ZEROTECH Thrive™, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Combat with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Thread Pitch: 1/2-28 UNEF Caliber: 9X19 Weight: 23.0 oz. Lenght: 7 3/4 inches Height: 5 1/4 inches Barrel: 5 inches (threaded) Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA   Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing GLOCK®  17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS ZEROTECH Thrive™, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920 Combat with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 23.0 oz. Lenght: 7 3/4 inches Height: 5 1/4 inches Barrel: 5 inches (threaded) Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17- round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA    Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below:   TESTED OPTIC MODELS ZEROTECH Thrive™, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Combat with Optic Cut, Threaded Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 19.2 oz. Lenght: 7 7⁄8 inches Height: 5 1⁄4 inches Barrel: 5 1⁄2 inches (threaded) Thread Pitch: 1/2-28 UNEF Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below:   TESTED OPTIC MODELS ZEROTECH Thrive™, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Combat with Optic Cut, Threaded FDE Version Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 19.2 oz. Lenght: 7 7⁄8 inches Height: 5 1⁄4 inches Barrel: 5 1⁄2 inches (threaded) Thread Pitch: 1/2-28 UNEF Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessoriesMADE IN THE USA

  High End Custom Pistole from SHADOW SYSTEMS USA  BUILT IN COMPENSATION FOR AN UNBELIEVEABLY FLAT SHOOTING EXPERIENCE THE PERFORMANCE DR920P The DR920P is a full sized, 17+1 pistol with an integrated compensator built into the barrel. The built-in compensator does not make use of a threaded barrel, making the DR920P compliant in many jurisdictions that have threaded-barrel-bans. The DR920P’s comp and slide are machined to give a single-piece appearance, while the novel design allows for rapid removal and attachment of the comp for cleaning. The patent-pending integrated compensator aligns automatically without the need for set screws or other friction devices. The DR920P’s front sight is mounted directly on top of the comp, for faster shot-to-shot tracking. The DR920P, which fits G34 holsters, comes complete with features customers have come to expect from Shadow Systems, including an aggressively textured frame with interchangeable backstraps that adjust the point of aim, an extended beavertail, and a textured recoil control ledge. The drop-safe and carry-safe flat faced trigger has a 4.5-5 lbs pull weight with a crisp, tactile reset. The match-grade, spiral-fluted barrel features the patent-pending comp attachment system, which utilizes an easy-to-detach pin system to mount the compensator. The DR920P is offered with the Elite model slide, which includes front and rear directional serrations, a weight-optimizing window cut, and Shadow Systems’ patented multi-footprint optic system. The optic cut allows for direct-to-slide mounting of most major brands of red dot optics, without the need for intervening plates or adapters. A green tritium front sight is mounted directly on the built-in compensator and is paired with a blacked out serrated rear sight. The DR920P fits Gen 4 G34 holsters. Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS ZEROTECH, Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: DR920P Elite with Optic Cut Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 8.44 inches Height: 5.25 inches Barrel: 4.50 inches   Barrel Finish: Bronze TiCN Barrel: Compensated Front Sight Type: TRITIUM, Green Rear Sight: Black Serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessories C.I.P. included Laser markings were carried out covertlyMADE IN THE USA

  High End Custom Pistol from SHADOW SYSTEMS USA  Born out of a custom request for Law Enforcement, the new XR920 is the crossover pistol that is quicker out of the holster with a full 17+1 capacity. Featuring the customizable ergonomics and unmatched recoil control you expect from a Shadow Systems pistol, the XR920 is mission ready.The XR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The XR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled, spiral-fluted, and available threaded or unthreaded. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset.The patented optic cut allows shooters to mount a mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.Whether your pistol is your nightstand security blanket or your daily duty partner, there is a Shadow Systems pistol to fit the role. The XR920 is a perfect blend of the MR920 and DR920.  Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters. Try on a handful of optics below: TESTED OPTIC MODELS Zerotech: Thrive, Thrive Micro // Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920 Elite with Optic Cut FDE Version Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 19.2 oz. Lenght: 7 3⁄8 inches Height: 5 1⁄4 inches Barrel: 4 inches  Barrel Finish: Black Nitride Front Sight Type: TRITIUM green Rear Sight Type: Black serrated Trigger: Flat-faced 5-5.5 lb. trigger pull  Action: Striker fire Capacity: 17+1 Magazine: 17-round Magpul® magazine Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag Compatible accessories see under this article, accessories C.I.P. included Laser markings were carried out covertlyMADE IN THE USA

  WE BUILD GUNS THAT MAXIMIZE YOUR PERFORMANCE The MR-P feature an all-steel compensator which directs propellent gasses upward and keeps the gun on target. Shadow Systems compensated guns are designed to function in adverse conditions. We prioritize reliability but still provide the most controllable, easiest to hit with pistols on the market. SELF-LOCKING, SELF-INDEXING The MR-P and XR-P compensator is a highly compact steel compensator that adds only ½ inch to the pistol. Consequently, both guns fit in existing G17 holsters. The compensator uses the patent pending QD attachment system found on the successful CR-P pistol. This allows for ease of maintenance and sales in jurisdictions that ban threaded barrels. With this design, we eliminated the use of a conventional threaded barrel. Instead, Shadow Systems developed a proprietary 3-lug muzzle that works in combination with a centrally located locking lever in the body of the comp. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters, try on a handful of optics below. TESTED OPTIC MODELS:  ZEROTECH Thrive™  //  SIGHTMARK MINI SHOT A-SPEC M3  //  Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920P Elite with Optic and Window Cut Compensator Series Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 3/4 inches Height: 4 3/4 nches Barrel: 4.25 inches  Barrel Finish: Bronze TiCN, 3-Lug Muzzle Device Front Sight Type: Tritium, Rear Sight Type: Black serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker Fire Capacity: 15+1 Magazine: 15-round Magpul® Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag C.I.P. Proof included Compatible accessories see under this article, accessories.MADE IN THE USA

WE BUILD GUNS THAT MAXIMIZE YOUR PERFORMANCE The MR-P feature an all-steel compensator which directs propellent gasses upward and keeps the gun on target. Shadow Systems compensated guns are designed to function in adverse conditions. We prioritize reliability but still provide the most controllable, easiest to hit with pistols on the market. SELF-LOCKING, SELF-INDEXING The MR-P and XR-P compensator is a highly compact steel compensator that adds only ½ inch to the pistol. Consequently, both guns fit in existing G17 holsters. The compensator uses the patent pending QD attachment system found on the successful CR-P pistol. This allows for ease of maintenance and sales in jurisdictions that ban threaded barrels. With this design, we eliminated the use of a conventional threaded barrel. Instead, Shadow Systems developed a proprietary 3-lug muzzle that works in combination with a centrally located locking lever in the body of the comp. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the MR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters, try on a handful of optics below. TESTED OPTIC MODELS:  ZEROTECH Thrive™  //  SIGHTMARK MINI SHOT A-SPEC M3  //  Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: MR920P Elite with Optic and Window Cut Compensator Series Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 21.5 oz. Lenght: 7 3/4 inches Height: 4 3/4 nches Barrel: 4.25 inches  Barrel Finish: Black Nitride, 3-Lug Muzzle Device Front Sight Type: Tritium, Rear Sight Type: Black serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker Fire Capacity: 15+1 Magazine: 15-round Magpul® Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag C.I.P. Proof included Compatible accessories see under this article, accessories.MADE IN THE USA

 WE BUILD GUNS THAT MAXIMIZE YOUR PERFORMANCE The XR-P feature an all-steel compensator which directs propellent gasses upward and keeps the gun on target. Shadow Systems compensated guns are designed to function in adverse conditions. We prioritize reliability but still provide the most controllable, easiest to hit with pistols on the market. SELF-LOCKING, SELF-INDEXING The MR-P and XR-P compensator is a highly compact steel compensator that adds only ½ inch to the pistol. Consequently, both guns fit in existing G17 holsters. The compensator uses the patent pending QD attachment system found on the successful CR-P pistol. This allows for ease of maintenance and sales in jurisdictions that ban threaded barrels. With this design, we eliminated the use of a conventional threaded barrel. Instead, Shadow Systems developed a proprietary 3-lug muzzle that works in combination with a centrally located locking lever in the body of the comp. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters, try on a handful of optics below. TESTED OPTIC MODELS:  ZEROTECH Thrive™  //  SIGHTMARK MINI SHOT A-SPEC M3  //  Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920P Elite with Optic and Window Cut Compensator Series Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/4 inches Height: 5 1/4 nches Barrel: 4.25 inches  Barrel Finish: Bronze TiCN, 3-Lug Muzzle Device Front Sight Type: Tritium, Rear Sight Type: Black serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker Fire Capacity: 17+1 Magazine: 17-round Magpul® Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag C.I.P. Proof included Compatible accessories see under this article, accessories.MADE IN THE USA

  WE BUILD GUNS THAT MAXIMIZE YOUR PERFORMANCE The XR-P feature an all-steel compensator which directs propellent gasses upward and keeps the gun on target. Shadow Systems compensated guns are designed to function in adverse conditions. We prioritize reliability but still provide the most controllable, easiest to hit with pistols on the market. SELF-LOCKING, SELF-INDEXING The MR-P and XR-P compensator is a highly compact steel compensator that adds only ½ inch to the pistol. Consequently, both guns fit in existing G17 holsters. The compensator uses the patent pending QD attachment system found on the successful CR-P pistol. This allows for ease of maintenance and sales in jurisdictions that ban threaded barrels. With this design, we eliminated the use of a conventional threaded barrel. Instead, Shadow Systems developed a proprietary 3-lug muzzle that works in combination with a centrally located locking lever in the body of the comp. The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the XR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.* Shadow Systems pistols have the option of a best-in-class optic mounting cut, which accommodates most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters, try on a handful of optics below. TESTED OPTIC MODELS:  ZEROTECH Thrive™  //  SIGHTMARK MINI SHOT A-SPEC M3  //  Holosun: 407c, 507c, 508-T // Leupold: DeltaPoint Pro // Shield: RMSc // SIG: Romeo 1 Pro // Swampfox: Liberty, Justice, Kingslayer // Trijicon: RMR, SRO // TruGlo: Trutec // Vortex: Viper Details: XR920P Elite with Optic and Window Cut Compensator Series Slide Material: 17-4 Stainless Steel Barrel Material: 416R Stainless Steel Caliber: 9X19 Weight: 22.4 oz. Lenght: 7 3/4 inches Height: 5 1/4 nches Barrel: 4.25 inches  Barrel Finish: Black Nitride, 3-Lug Muzzle Device Front Sight Type: Tritium, Rear Sight Type: Black serrated Trigger: Flat-faced 4.5-5 lb. trigger pull Action: Striker Fire Capacity: 17+1 Magazine: 17-round Magpul® Included Magwell Extension Included 3x Backstraps, Backstrap tool Included Range Bag C.I.P. Proof included Compatible accessories see under this article, accessories.'MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 290-313 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR AIMPOINT COA GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 19, 45, 47 MOS A-Cut Models NOT compatible to GLOCK® 48 MOS A-Cut Models  Sight Style:  Blade Height: Optics Ready Stealth for Aimpoint COA are designed to be paired with the Aimpoint COA. Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR AIMPOINT COA GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 19, 45, 47 MOS A-Cut Models NOT compatible to GLOCK® 48 MOS A-Cut Models  Sight Style:  Blade Height: Optics Ready Stealth for Aimpoint COA are designed to be paired with the Aimpoint COA. Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  No dovetail? No problem. Our newest variation of our popular Optics Ready Stealth Sights has a rear sight that mounts to the deck of the optic. No special tools, just a hex wrench and the new supplied screws gets you our most popular lower 1/3 cowitness installed on guns that have no rear dovetail, or skip the dovetail entirely. Still carrying our high LPI serrations, our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 22,23,26 45 MOS with Trijicon RMR Sight Style:  Blade Height: Optics mounted Stealth for Trijicon RMR are designed to be paired with the Trijicon RMR. Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  No dovetail? No problem. Our newest variation of our popular Optics Ready Stealth Sights has a rear sight that mounts to the deck of the optic. No special tools, just a hex wrench and the new supplied screws gets you our most popular lower 1/3 cowitness installed on guns that have no rear dovetail, or skip the dovetail entirely. Still carrying our high LPI serrations, our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 22,23,26 45 MOS with Trijicon RMR Sight Style:  Blade Height: Optics mounted Stealth for Trijicon RMR are designed to be paired with the Trijicon RMR. Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun 507k, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 507k THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun EPS Carry, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS Carry THEN YOUR SIGHTS ARE: Optics Ready Stealth 220-227 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun 509t, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 509t THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun EPS, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models. Optics that fit this plate: Zerotech: Thrive HDHolosun: 407c, 507c, 507Comp, 508tTrijicon: RMR Type 2, RMR HD, SROGideon Optics: Granite RMR FootprintSwampfox: Liberty/JusticeCompatible Reflex sights and accessories see under this article, accessoriesSee Pairing Guide for all optic compatibilitySpecifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Zerotech Thrive HD, Holosun 507c/407c/Comp, Trijicon RMR Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witness IF YOU HAVE: Trijicon RMRHD, Trijicon SRO Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 358-381 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Aimpoint Acro P-2, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Aimpoint Acro P-2 THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Leupold Delta Point Pro, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Leupold Delta Point Pro THEN YOUR SIGHTS ARE: Optics Ready Stealth 469-494 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR BERETTA. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Beretta APX SeriesNOT compatible to APX Carry Series Sight Style:  Blade Height: For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .413-.443: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR BERETTA. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Beretta APX SeriesNOT compatible to APX Carry Series Sight Style:  Blade Height: For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .413-.443: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR CZ. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: CZ P-10 Optics Ready C/F/S SeriesNOT compatible to CZ P-10 models without an optic cut! Sight Style:  Blade Height: CZ Optics Ready Stealth are designed to be paired with pistol opticsFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .286-.355: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR CZ. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: CZ P-10 Optics Ready C/F/S SeriesNOT compatible to CZ P-10 models without an optic cut! Sight Style:  Blade Height: CZ Optics Ready Stealth are designed to be paired with pistol opticsFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color:  Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .286-.355: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield Hellcat OSPSpringfield Hellcat RDPSpringfield Hellcat XD-S Mod.2 OSPSight Style:  Blade Height: We recommend pairing these sights with the OEM Crimson Trace optic or the Holosun 507K opticFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield Hellcat OSPSpringfield Hellcat RDPSpringfield Hellcat XD-S Mod.2 OSPSight Style:  Blade Height: We recommend pairing these sights with the OEM Crimson Trace optic or the Holosun 507K opticFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield EchelonSight Style: For full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.  Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness.248-.268: for Zerotech Thrive HD, Trijicon RMR, Holosun EPS, 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield EchelonSight Style: For full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.  Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness.248-.268: for Zerotech Thrive HD, Trijicon RMR, Holosun EPS, 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. Designed to work with optics, not suppressors. The Optics Ready Stealth sight blade heights offer the perfect co-witness tailored to the shooter’s preference. Serrated for low-glare, you’ll never know they’re there until you need them. Available in multiple rod colors, a generous amount of rod is exposed for maximum brightness. Compatibility: GLOCK® 17, 17L, 18, 19, 19X, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Sight: Blank Features: Built in the USA  New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. Designed to work with optics, not suppressors. The Optics Ready Stealth sight blade heights offer the perfect co-witness tailored to the shooter’s preference. Serrated for low-glare, you’ll never know they’re there until you need them. Available in multiple rod colors, a generous amount of rod is exposed for maximum brightness. Compatibility: GLOCK® 17, 17L, 18, 19, 19X, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Red Rear Sight: Blank Features: Built in the USA  New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.  Find your co-witness sight for your firearm  HERE Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Black Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 469-494 / For full Dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 469-494 / For full Dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.   Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size S

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size L

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size XL

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size 2XL

  Description: Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.   The A-0010 footprint also matches the following, though screw sizing may vary: Trijicon RMR  Trijicon SRO Holosun HS407C Holosun HS507C Holosun HS508T Specs:   Height: 9.5 mm/.374" Weight: 21 g/0.7 oz Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.    

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 469-494 / For full Dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Black Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size M