ZEROTECH Thrive™ HD Reflex Sight 3 MOA High Rise

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 290-313 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR AIMPOINT COA GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 19, 45, 47 MOS A-Cut Models NOT compatible to GLOCK® 48 MOS A-Cut Models  Sight Style:  Blade Height: Optics Ready Stealth for Aimpoint COA are designed to be paired with the Aimpoint COA. Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR AIMPOINT COA GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 19, 45, 47 MOS A-Cut Models NOT compatible to GLOCK® 48 MOS A-Cut Models  Sight Style:  Blade Height: Optics Ready Stealth for Aimpoint COA are designed to be paired with the Aimpoint COA. Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  No dovetail? No problem. Our newest variation of our popular Optics Ready Stealth Sights has a rear sight that mounts to the deck of the optic. No special tools, just a hex wrench and the new supplied screws gets you our most popular lower 1/3 cowitness installed on guns that have no rear dovetail, or skip the dovetail entirely. Still carrying our high LPI serrations, our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 22,23,26 45 MOS with Trijicon RMR Sight Style:  Blade Height: Optics mounted Stealth for Trijicon RMR are designed to be paired with the Trijicon RMR. Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  No dovetail? No problem. Our newest variation of our popular Optics Ready Stealth Sights has a rear sight that mounts to the deck of the optic. No special tools, just a hex wrench and the new supplied screws gets you our most popular lower 1/3 cowitness installed on guns that have no rear dovetail, or skip the dovetail entirely. Still carrying our high LPI serrations, our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 22,23,26 45 MOS with Trijicon RMR Sight Style:  Blade Height: Optics mounted Stealth for Trijicon RMR are designed to be paired with the Trijicon RMR. Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun 507k, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 507k THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock MOS Slimline models with the version 1 MOS (RMSc factory cut).Not compatible with 2026 models with the new V2 MOS (HoloK) factory cut.Fits Holosun EPS Carry, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility.  Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS Carry THEN YOUR SIGHTS ARE: Optics Ready Stealth 220-227 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun 509t, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun 509t THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Holosun EPS, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Holosun EPS THEN YOUR SIGHTS ARE: Optics Ready Stealth 260-267 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models. Optics that fit this plate: Zerotech: Thrive HDHolosun: 407c, 507c, 507Comp, 508tTrijicon: RMR Type 2, RMR HD, SROGideon Optics: Granite RMR FootprintSwampfox: Liberty/JusticeCompatible Reflex sights and accessories see under this article, accessoriesSee Pairing Guide for all optic compatibilitySpecifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Zerotech Thrive HD, Holosun 507c/407c/Comp, Trijicon RMR Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witness IF YOU HAVE: Trijicon RMRHD, Trijicon SRO Optic THEN YOUR SIGHTS ARE: Optics Ready Stealth 358-381 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Aimpoint Acro P-2, and other optics with compatible mounting footprint.See Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Aimpoint Acro P-2 THEN YOUR SIGHTS ARE: Optics Ready Stealth 330-353 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Night Fision’s Ultra Low Profile Pistol Optic Plates offer precision, durability, and value for shooters needing a mounting solution for their red dot sight. Crafted from premium 17-4 stainless steel and built to the tightest tolerances, these plates withstand harsh recoil and ensure a secure, accurate fit. Compatibility: Compatible with Glock 17, 17L, 19, 20, 21, 22, 23, 26, 34, 35, 40, 41, 45, 47, 49 MOS modelsNOT compatible with Slimline models.Fits Leupold Delta Point Pro, and other optics with compatible mounting footprint.Compatible accessories see under this article, accessoriesSee Pairing Guide for all optic compatibility. Specifications: Machined from 17-4 Stainless Steel & Nitride coatedOptic Plate thickness: 0.2” Included in the package: Precision Optic PlateScrew setNight Fision Optic Tool Most Common Sight Pairings: The job of iron sights on firearms with Optics are to act as a back up sighting system the optic—to do this, they must present over the optic’s battery deck to be seen, but should show no taller in your optic window than need be. The lower 1/3 co-witness is the ideal. IF YOU HAVE: Leupold Delta Point Pro THEN YOUR SIGHTS ARE: Optics Ready Stealth 469-494 blade height sights for lower 1/3rd co-witnessFor other heights available, jump to the Glock Optics Ready Stealth Sight page here.For a full list of co-witness sights visit our Pairing Guide, or you can explore with our Co-Witness Selector. Find Your Co-Witness Sights - Night Fision MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR BERETTA. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Beretta APX SeriesNOT compatible to APX Carry Series Sight Style:  Blade Height: For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .413-.443: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR BERETTA. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Beretta APX SeriesNOT compatible to APX Carry Series Sight Style:  Blade Height: For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .413-.443: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR CZ. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: CZ P-10 Optics Ready C/F/S SeriesNOT compatible to CZ P-10 models without an optic cut! Sight Style:  Blade Height: CZ Optics Ready Stealth are designed to be paired with pistol opticsFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .286-.355: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR CZ. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: CZ P-10 Optics Ready C/F/S SeriesNOT compatible to CZ P-10 models without an optic cut! Sight Style:  Blade Height: CZ Optics Ready Stealth are designed to be paired with pistol opticsFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color:  Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night FisionExample: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .286-.355: for Zerotech Thrive HD, Trijicon RMR, Holosun 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield Hellcat OSPSpringfield Hellcat RDPSpringfield Hellcat XD-S Mod.2 OSPSight Style:  Blade Height: We recommend pairing these sights with the OEM Crimson Trace optic or the Holosun 507K opticFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield Hellcat OSPSpringfield Hellcat RDPSpringfield Hellcat XD-S Mod.2 OSPSight Style:  Blade Height: We recommend pairing these sights with the OEM Crimson Trace optic or the Holosun 507K opticFor full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield EchelonSight Style: For full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.  Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness.248-.268: for Zerotech Thrive HD, Trijicon RMR, Holosun EPS, 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR SPRINGFIELD. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: Springfield EchelonSight Style: For full dimensions see Dimensions Tab! Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories.  Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness.248-.268: for Zerotech Thrive HD, Trijicon RMR, Holosun EPS, 507c, and similar battery pack height optics. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Yellow Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  This Premium Short-Sleeve Crew Neck T-Shirt features a Zerotech logo artwork on the front and back side. Details: Premium Short-Sleeve T-Shirt Color: Dark Grey Small Stitched Logo in the Front, Color White/Orange Extended ZT Big Logo in the Back, Color White 95% Cotton, 5% Elastane Designed in Australia Size S

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Orange Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

  NIGHT FISION OPTICS READY STEALTH SERIES FOR GLOCK. THE WORLD´S 1 SOURCE FOR Premium Tritium Night Sights | 30% Brighter Sights with Patented Dome Technology. Our patented, injection molded sleeve design not only holds our tritium vials securely in place, it creates a brighter and more durable ring, we call The Perfect Dot™, that provides maximum visibility both day and night. Compatibility: GLOCK® 17, 19, 19X, 22, 23, 34, 35, 40, 41, 45, 47, GEN 1-5 MOS/Non-MOS Models  SHADOW SYSTEMS® MR/XR/DR Optics Ready Models ANDERSON® Kiger-9C Optics Ready Models Sight Style:  Blade Height: 330-353 / For full dimensions see Dimensions Tab Square Notch Rear + Front Front Ring Color: Black Rear Ring Color: Black Features: Built in the USA with Swiss Tritium Perfect Dot™, Domed lens collimates tritium rays for a sharper sight picture  Brightest Tritium Night Sights on the market New, Updated Serrated Sight Body CNC Machined out of high quality steel Black Nitride coating used to improve wear and corrosion resistance Installation: Gunsmith Recommended, for Installation Information please review our Install Guide Compatible accessories see under this article, accessories. Find Your Co-Witness Sights - Night Fision Example: Recommended Optics Pairings for approximately Lower 1/3 Co-Witness .163-.175: Holosun SCS on an MOS cut gun.  .290-.313: Holosun 507c, 407c, 508t, or similar battery pack height optic using a direct (milled, or MOS footprint) system (no plate). Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. Update: This blade will often yield a lower 1/3 for slimmer aftermarket plates on factory guns, but some customers have found they sit slightly lower than a 1/3 and will occlude the tritium partially, and so we have updated our information to reflect these at lower 1/5th for plated, factory guns.  .330-.353: ZEROTECH Thrive HD, Trijicon RMR, Holosun 507c/407c/508t, Swampfox Liberty, Swampfox Justice, or similar battery pack height optic using a plate mounted system from C&H Precision Weapons, B&T, or Forward Controls. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish.  .469-.494: Delta Point Pro or similar battery pack height optic using a plate mounted system. Please review the blade height dimensions carefully to ensure sights co-witness at the level you wish. MADE IN THE USA DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Crossbreed Seconds nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.