AR- Ersatzteile
Specifications: Compatible with ARMALITE AR-10A® and AR-10B® rifles only Compatible firearms see under this article, accessories MADE IN THE USA
Specifications: Length: Carbine Made from glasfiber reinforced polymer Double heatshield MIL-STD Easy installation No special tools are required to install the handguard Compatible with A2 Handguard Cap Compatible accessories, see accessories under this article MADE IN THE USA
Original ArmaLite® M-15™/AR-15 Spring Replacement Kit, 20pcs Specifications: Compatible with M-15™/AR-15/M16/M4 rifles according to Mil-Spec diameters MADE IN THE USA
Original ArmaLite® M-15™/AR-15 Field Repair Kit, 18pcs Specifications: Compatible with M-15™/AR-15/M16/M4 rifles according to Mil-Spec diameters MADE IN THE USA
Original ArmaLite® M-15™/AR-15 Lower Parts Kit, 22pcs Specifications: Compatible with M-15™/AR-15/M16/M4 rifles according to Mil-Spec diameters MADE IN THE USA
Fully adjustable Low-profile gas block for your AR-10® and AR-15/M-15™ rifle. Specifications: For AR-10® and AR-15/M-15™ Compatible with barrels utilizing a .750 gas block journal Laterally arranged adjustment screw, infinitely adjustable With front locking set screw Made from Stainless Steel Finish: SBN Included Roll Pin Compatible accessories see under this article, accessories MADE IN THE USA
This Lower parts kit match perfectly with the GEN12 lower and is also compatible with most 308 DPMS gen1 patterned lowers. Kit includes as pictured: Hogue GripPistol grip screwSafety selector springSafety selector detentEnhanced Take Down/ Pivot pinsTake Down/ Pivot pin spring (2x)Take Down/ Pivot pin detent (2x)Safety SelectorAdaptive Tactical Ex-Performance StockBuffer Tube Milspec 308 Carbine (short 2.5") Buffer 3.8oz 308 Carbine SpringQD End PlateCastle NutBuffer RetainerBuffer Retainer SpringBeef-up kit Beef-up kit includes: Antiwalk trigger pins and screwsImproved Bolt Catch Enhanced Power Bolt Catch SpringBolt Catch PlungerMagazine Catch Assembly: Improved Milspec Magazine Catch Bar, Enhanced Power Spring, and Improved Button Take Down/ Pivot Pins INFORMATION Kit does NOT include TriggerCompatible lower, trigger and accessories see under this article, accessories NOTICE The beef-up kit must be installed in the lower to maintain function of your GEN-12 upper. If they are not installed then you may have magazines fall out, have the bolt prematurely open, or break a trigger pin during firing. Apply blue thread locker to the screws of the antiwalk pins during installation and torque to 6 in-lbs, and be sure to let cure entirely before shooting.
This Lower parts kit match perfectly with the GEN12 lower and is also compatible with most 308 DPMS gen1 patterned lowers. Kit includes as pictured: Hogue GripPistol grip screwSafety selector springSafety selector detentEnhanced Take Down/ Pivot pinsTake Down/ Pivot pin spring (2x)Take Down/ Pivot pin detent (2x)Safety Selector
Upgrade your AR-15 lower receiver with the TINCK ARMS Combat Billet Trigger Guard. Designed for durability, ergonomics, and superior performance. Made from high-quality aluminum, it provides exceptional strength and resistance, while allowing for faster and easier trigger access—even with gloves. The perfect choice for those seeking reliability and comfort in combat applications. Compatible with all standard design AR-15 Mil-Spec Receivers. Features: Premium Aluminum – Lightweight yet extremely durable construction Ergonomic Design – Ensures quick and easy trigger access Compatibility – Fits a wide range of AR-15 lower receivers Tactical Performance – Designed for fast and efficient operation in all conditions Ideal for use with gloves Standard Wide: 11,0mm No wobbling Simple installation Finish: Matte black hard-coat anodized Mil 8625 Type 3 Class Use a 2mm Hex Key for installation INCLUDES: 1x Billet Combat Trigger Guard 1x Trigger Guard Roll Pin 1x 2mm Hex Set Screw MADE IN SLOVENIA
Upgrade your AR-15 lower receiver with the TINCK ARMS Enhanced Billet Trigger Guard. For those who demand more! The Tinck Arms Enhanced Trigger Guard offers superior ergonomics and robust aluminum construction, improving both comfort and responsiveness. The extended design allows for easy trigger access even with gloves, making it ideal for operators, competitive shooters, and tactical enthusiasts. Compatible with all standard design AR-15 Mil-Spec Receivers. Features: Durable Aluminum – Impact-resistant and wear-proof premium material Extended Shape – Optimized trigger access for maximum comfort Easy Installation – Compatible with most AR-15 platforms Modern & Functional Design – Enhances aesthetics and usability Extended Wide: 15,7mm No wobbling Simple installation Finish: Matte black hard-coat anodized Mil 8625 Type 3 Class Use a 2mm Hex Key for installation INCLUDES: 1x Enhanced Billet Trigger Guard 1x Trigger Guard Roll Pin 1x 2mm Hex Set Screw MADE IN SLOVENIA
PERUN X-9™ Bolt Catch Kit Kompatibel zu allen PERUN X-9™ Generationen sowie zu Angstadt Arms 9mm Lower Material: Stahl, Salzbadnitriert High quality PERUN X-9™ Bolt Catch Kit Compatible with all PERUN X-9™ generations and Angstadt Arms 9mm Lower Material: steel, salt bath nitrided
Upgrade your AR-15 lower receiver with the TINCK ARMS Enhanced Steel QD Endplate Kit, designed for quick-detach sling attachment and enhanced maneuverability in any tactical environment. Compatible with all standard design AR-15 Mil-Spec & AR-10 Receivers. Compatible accessories see under this article, accessories Features T-Arms Enhanced QD Endplate Sling Mount: CNC-machined from Heavy-Duty Steel for maximum strength and reliability Quick-Detach Compatible – Integrated QD socket allows instant sling attachment and release with any standard QD swivel Durable Coating – Finished with a tough black coating for excellent corrosion and wear resistance Mil-Spec Fitment – Compatible with standard AR-15/AR-10 Carbine buffer tubes and receiver extensions Corrosion-Resistant QPQ Finish – Protects against wear & tear T-Arms Enhanced AR-15 Castle Nut: CNC-machined from Heavy-Duty Steel for maximum strength and reliability 14,40mm Extended Height Secure Lockup – Keeps your buffer tube firmly in place Mil-Spec Compatible – Works with AR-15/AR-10 Carbine buffer tubes Corrosion-Resistant QPQ Finish – Protects against wear & tear MADE IN SLOVENIA
Perfecting the proven design of the first generation CMMG® ambi charging handles, the CMMG ZEROED™ ambidextrous charging handle was engineered with handles that are less intrusive to users while still providing easy operation. Constructed from rugged 7075 aluminum, the ZEROED ambi charging handle was made to withstand any charging method while providing superior grip, even with gloves or optics so you can always charge your AR with confidence. Designed to work with CMMG Mk3™ and most SR25/LR-308/DPMS pattern firearms. Specifications: Billed 7075-T6 AluminumFinish: Type III Hard Coat AnodizingMade in the USA Compatibility: AR-10/Mk3 firearms - according to SR25/LR-308/DPMS PlatformNOT compatible to german manufacturers!
The CMMG .22 ARC Mil-Spec style Anti-Jam Charging Handle Assembly is designed for our .22 LR Conversions as well as our dedicated .22 LR Uppers/Bolts. Features durable polymer construction with a filled-in, reinforced channel in the charging handle to prevent instances where .22 casings can eject into the open channel of a standard charging handle. Specifications: Durable Black PolymerMade in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4BRAVO™ AR Rifle Conversion KitsONLY compatible to CMMG .22LR productsCompatible accessories see under this article, accessories
Built to the same degree as our other CMMG® ZEROED™ charging handles, the CMMG ZEROED .22 LR ambidextrous charging handle was designed specifically for our .22 LR Conversions as well as our dedicated .22 LR Uppers/Bolts. The ZEROED .22LR charging handle features a filled-in, reinforced channel in the charging handle to prevent instances where .22 casings can eject into the open channel of a standard charging handle. Specifications:Billed 7075-T6 AluminumFinish: Type III Hard Coat AnodizingMade in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4BRAVO™ AR Rifle Conversion KitsONLY compatible to CMMG .22LR productsCompatible accessories see under this article, accessories
Standard AR15 Mil-Spec charging handle with latch installed, made with forged 7075-T6 aluminum. Specifications: Billed 7075-T6 AluminumFinish: Type III Hard Coat AnodizingMade in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4, Mk9, Mk10, Mk17, Mk57, MkG, MkGsCompatible accessories see under this article, accessories
Perfecting the proven design of the first generation CMMG® Ambi Charging Handles, the CMMG ZEROED™ ambidextrous charging handle was engineered with handles that are less intrusive to users while still providing easy operation. Constructed from rugged 7075 aluminum for AR-15 platform firearms, the ZEROED ambi charging handle was made to withstand any charging method while providing superior grip, even with gloves or optics so you can always charge your AR with confidence. Specifications: Billed 7075-T6 AluminumFinish: Type III Hard Coat AnodizingMade in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4, Mk9, Mk10, Mk17, Mk57, MkG, MkGsCompatible accessories see under this article, accessories
Meet the next generation of CMMG® handguards! Featuring an incredibly lightweight design and superior ergonomics, the EML™4 Handguard is where beauty meets functionality. Each AR15 EML4 handguard is made from aircraft grade 6061-T6 aluminum, with M-LOK® slots at the 3, 6 and 9 o’clock positions and a full-length picatinny rail on top, maximizing accessory space even in the shortest variety of our handguards. Specifications: Length: 4"Inner diameter: 1.3"Outer diameter: 1.5"Material: Billed 6061-T6 AluminumFinish: Cerakote Armor BlackKit includes barrel nut, retention key, and screws.Made in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4, Mk9, Mk10, Mk17, Mk57, MkG, MkGsCompatible accessories see under this article, accessories
Attaches to standard M-Lok handguard systems to mount 1913 Picatinny accessories. Specifications: Rounded edges, no risk of injury7 Slot RailM-Lok AttachmentMaterial: Billed 6061-T6 AluminumMatte Mil-Spec Type III black hard coat anodized finishMounting hardware includedMade in the USA
Attaches to standard M-Lok handguard systems to mount 1913 Picatinny accessories. Specifications: Rounded edges, no risk of injury5 Slot RailM-Lok AttachmentMaterial: Billed 6061-T6 AluminumMatte Mil-Spec Type III black hard coat anodized finishMounting hardware includedMade in the USA
Drop-in triggers are an easy upgrade that can take an AR from okay to exceptional, though mil-spec style trigger pins can have a tendency to "walk" out of one side of the receiver while firing, especially with cassette style trigger packs. Made in the USA CMMG ZEROED Anti-Walk Trigger Pins come with everything you need to solve that dilemma including: (2) trigger pins and (4) Torx T8 trigger pin screws Compatibility: Fits .154" diameter pin AR receivers
Meet the next generation of CMMG® handguards! Featuring incredibly lightweight design and improved ergonomics, EML™15 handguard where beauty meets functionality. Each EML15 handguard is is 15'' inch long and made from aircraft grade 6061-T6 aluminum with M-LOK® slots at the 3, 6 and 9 o’clock positions and a picatinny/M-LOK hybrid top rail. Now is the time to elevate the style and accessory space of your AR. Specifications: Length: 15"Inner diameter: 1.3"Outer diameter: 1.5"Material: Billed 6061-T6 AluminumFinish: Cerakote Armor BlackKit includes barrel nut, retention key, and screws.Made in the USA Compatibility: Platform: AR-15 Mil-Spec Upper Receiver / Mk4, Mk9, Mk10, Mk17, Mk57, MkG, MkGsCompatible accessories see under this article, accessories
For those times you want to take your 5.56mm or 5.7x28mm DISSENT® to the range but don't want to spend an arm and a leg on ammo, now is the time to add a DISSENT .22 LR AR Conversion Adapter to your collection. Compatible with 5.56mm to .22 LR and 5.7x28mm to .22 LR AR Conversion kits. Made in the USA Have questions? Check out our CMMG Resource article about .22 LR AR Conversion Kits and the DISSENT .22 Adapter How To Run The .22 LR AR Conversion Kit In Your DISSENT - Read/Watch Now
Customization is endless with the AR15 platform, which is why the CMMG® ZEROED™ Mk4/AR15 Gunbuilder’s Kit includes all of the essential parts except the most commonly upgraded ones: Trigger Guard, Fire Control Group, and Pistol Grip. Check out our interactive install walkthrough video below or read the CMMG Resources LPK Install article for an in-depth breakdown. All parts meet or exceed mil-spec. All installation hardware included. Made in the USA Kit Includes: Bolt Catch Plunger, Spring, & Roll PinTrigger/Hammer Retaining PinsZEROED 60°/90° Adjustable Ambi Safety, Detent, & SpringZEROED Ambi Magazine Catch & SpringZEROED Enhanced Magazine Release ButtonHD Pivot/Takedown Pins, Detents, & SpringsBuffer Retainer & Spring Compatibility: Compatible to AR-15, Mk4 and M4 Mil-Spec Lower ReceiverCompatible accessories, see under this article, accessories