AR- Ersatzteile

  Form meets function with the Strike Industries line of Aluminum trigger guards.  Not only does the sculpted, billet aluminum trigger guard make your rifle stand out from the pack, it also provides real added value over the competition.  The Cobra’s “hood” provides a hard index point off the trigger for safety, and a convenient rest that is optimally placed for rapid re-engagement.  The Fang feature from our popular polymer trigger guard is retained to help guide the magazine for faster, more consistent reloads. -WEIGHT:: 0.5 oz Contents- 1x Cobra Aluminum Trigger Guard- 4x M3 hex screw w/ pre-applied Loctite® Threadlocker Blue 242®- 1x Warning Card Features:- Aircraft grade aluminum construction- Magazine reload assist- Cleaner, faster reloads- Functions as safe trigger finger index rest- Lightweight Torque: Do not exceed 10 in/lbs (1.13 nM) for the trigger guard screws

  The SI-XBC Extended bolt catch is a heavy duty, “go-fast” addition to the SI line of enhanced parts.  Under high stress situations, the oversized bolt release lever aides in rapid thumb or palm engagement, even with gloved hands. The lever is reinforced for increased durability and impact resistance. Made from solid precision cast (not MIM!) steel, and hardened according to military specifications, the SI-XBC is a simple solution that ensures a lifetime of hard use.  Strike Hard, Strike Fast, with the SI- Extended Bolt Catch. Package include1 x AR Extended Bolt Catch1x Bolt Catch Roll pin Features-Mil-Spec bolt catch engagement surfaces function with an mil-spec bolt carrier.-Wide surface area "ping pong paddle" for faster operation.-Solid Investment Cast8620 construction, case hardened.- Widened Bolt Catch lower lever for easier manual locking of BCG to the rear.-Sleek SI Design fits forged Mil-Spec receivers, and blends well aesthetically with many billet upper and lower receivers.

  The SI UDC enables users to attach and detach the cover in 5 to 10 seconds with ease (stock dust cover will take more time to remove)! It is constructed of a high-density polymer making it more durable and functional than the traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power (To adjust detent: use small flathead driver and depress the ball detent and adjust as necessary.). Choose multiple designs to customize your AR!  NEW features of the Ultimate Dust Cover Enhanced Version include the added cut-out window on the rod for easy disassemble and that it has been made thinner than the original to be compatible with all AR15 receivers on the market and at the same time makes it even lighter weighing in at only 0.3oz! Additionally, The "True Seal" Lip has been slightly modified to provide an even better seal then ever before! The UDC-E (Ultimate Dust Cover- Enhanced Version) is the modified version of the original UDC for mil-spec receivers.  COMPATIBILITY:-AR-15 Mil-Spec upper receivers-Most billet AR-15 upper receivers-Aero Precision M4E1 NOT COMPATIBLE:-VLTOR MUR: Modular Upper Receiver-ZRO Delta-Lantac Enhanced BCG due to carrier and bolt design-Bootleg Four Position Adjustable Carrier Product Spec- Length:  3.46in- Weight:  .3oz- Materials: Polymer- Color:  Black or FDE Package includes:- 1x Dust Cover- 1x Spring- 1x Pin Features:- Spring-loaded internal detent rod for easy installation and take-down.- Constructed with lightweight durable polymer material weighing in at only .3oz!!!- Cut-out window for easy disassembly on any AR15 receiver!- Will never corrode rust or fade- Will never deform or get bent out of shape- Comes in a variety of designs- "True Seal" internal lip that seals the port tighter than traditional dust cover designs.- Built-in adjustable detent set screw to compensate for wear on the receiver.  *We strongly recommended applying blue Loctite threadlocker to the ball-detent thread after being adjusted.

  Ergonomic, intuitive, and fast.  The Strike Switch is a patent pending modular safety selector designed from inception using human factor considerations to aid positive on safe, on fire manipulations.  The unique toggle action allows one to quickly engage the safety when moving positions without altering the firing grip. The extended lever arm serves as an index point and thumb rest in either position.  Adding to the modularity, the Strike Switch is end user configurable to use a 60 or 90 Degree throw, left hand, right hand, or ambidexterous configurations.  The levers are machined from lightweight, but strong aircraft grade aluminum for weight savings, while the safety shaft itself is machined from high strength steel for a lifetime of use. Package includes:- 2x Shaft Screw- 1x 60/90 Shaft- 1x End Cap- 1x Right Side Strike Switch- 1x Left Side Strike Switch Features- Ambidexterous- Ergonomic Shape- Modular Assembly- Precision Machined- Strike 60/90 Option- Aircraft Grade 6061-T6 Aluminum Levers with Steel Selector Shaft COMPATIBILITY: AR-15 forged and milled Mil-Spec Lowers  NOT COMPATIBLE: HECKLER & KOCH MR308 / G28Z and HAENEL CR308 models NOT COMPATIBLE: .308 pattern lower receivers with shelf (DPMS, Bushmaster), ATI Omni Hybrid (all calibers), Seekins Precision SP 223 Gen 2, or F-1 Firearms Receivers, without modification to receiver or selector switch.

  The Strike Billet Magazine Catch Assembly features a billet magazine release button. Sculpted from a solid piece of 6061 aluminum, the button offers a functional and aesthetic upgrade to your AR. Deep serrations and ergonomic shape facilitates positive engagement and identification even in the dark or adverse conditions. Product SpecMaterials: - Magazine Release Button: 6061-T6 aluminum button- Enhanced Magazine Catch: Steel- Gross wt: 0.6 oz- Net wt: 0.4 oz Package includes:- 1x Billet Magazine Release- 1x Enhanced Magazine Catch- 1x Magazine Catch Spring Features:· Textured for positive feel and manipulation· Solid billet aluminum construction· Functional and aesthetic upgrade

  The Strike Industries AR Shim Set for .308 assists in timing and alignment of your muzzle devices for a piece of mind dependable installation. Crush washers are usually a one-time use washer designed to deform and do not guarantee alignment. Shim washers are flat, consistent and should be used whenever bore alignment is critical in applications such as silencer mounts or to ensure your muzzle device ports are correctly positioned. Available in both 1/2"-28 TPI (.223/5.56) or 5/8"-24 TPI (.308) sizes, the Strike Industries AR Shim Set for .223/5.56 or .308 are solid one-piece shims made in various precision thicknesses for just about any application. Package Contents:-x4 0.075mm/0.0029 inch shim-x3 0.22mm/0.0086 inch shim-x3 0.11mm/0.0043 inch shim-x2 0.34mm/0.0138 inch shim-x1 2.0mm/0.0787 inch shim Features:-Available in .223/5.56 or .308-Assists in timing-Ensure alignment-Properly position ports-Reusable-Made of SUS 304 Stainless steel

  The Strike Industries AR Shim Set for .223/5.56 assists in timing and alignment of your muzzle devices for a piece of mind dependable installation. Crush washers are usually a one-time use washer designed to deform and do not guarantee alignment. Shim washers are flat, consistent and should be used whenever bore alignment is critical in applications such as silencer mounts or to ensure your muzzle device ports are correctly positioned. Available in both 1/2"-28 TPI (.223/5.56) or 5/8"-24 TPI (.308) sizes, the Strike Industries AR Shim Set for .223/5.56 or .308 are solid one-piece shims made in various precision thicknesses for just about any application. Package Contents:-x4 0.075mm/0.0029 inch shim-x3 0.22mm/0.0086 inch shim-x3 0.11mm/0.0043 inch shim-x2 0.34mm/0.0138 inch shim-x1 2.0mm/0.0787 inch shim Features:-Available in .223/5.56 or .308-Assists in timing-Ensure alignment-Properly position ports-Reusable-Made of SUS 304 Stainless steel

Original Maxim Defense Bolt Spare Parts Kit, make sure your MD is always running top notch. Kit includes: Nickel Boron ExtractorNickel Boron Cam PinChrome Plated Firing PinExtractor spring with bufferExtractor pinExtractor spring O ringEjectorEjector springEjector roll pinFiring Pin Retaining PinGas Ring kit Compatibility: Maxim Defense MD:15™,MDX™, PDX™ and SDX™ firearms in caliber .223/5.56/.300 BLK/7,62x39Compatible accessories see under this article, accessories.

  The Strike Industries AR-15 lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers. The 9-Piece kit includes springs for the bolt catch, disconnector, buffer retainer, trigger, hammer, magazine catch, selector, and two detents. COMPATIBILITY: Mil-Spec AR-15 and typically most AR-10 lower receivers Package include:- 1 x Bolt Catch Spring- 1 x Buffer Retainer Spring- 1 x Trigger Spring- 1 x Hammer Spring- 1 x Disconnector Spring- 1 x Magazine Catch Spring- 1 x Selector Spring- 2 x Detent Spring Features:- Replace worn springs- Commonly used springs- Essential for a gunsmith or AR owner

  The Strike Industries pin kit is a valuable addition to your spare/replacement parts inventory. This kit is comprised of several important lower pins and detents. The kit contains takedown and pivot pins, takedown and pivot pin detents, hammer and trigger pins, selector detents, trigger guard roll pins, bolt catch roll pins and bolt catch plungers. If you're looking to assemble some stripped lower receivers or to replace worn out pins and detents, get your pin kit today!  COMPATIBILITY: AR-15: Mil-Spec lower receivers NOT COMPATIBLE:  - AR-10: Bolt Catch Roll Pin, Pivot Pin and Takedown Pin are not compatible with AR-10 lower receivers. - HAENEL or HECKLER & KOCH models Package includes:- 1x Takedown pin- 1 x Pivot pin- 1x Hammer pin- 1 x Trigger pin- 1 x Buffer Retainer Pin- 1 x Bolt catch plunger- 1 x Bolt catch roll pin- 1 x Take down pin detent- 1 x Pivot pin detent- 1 x Safety detent Features:- Essential Lower Receiver Pins- Durable and follows industry standards- Matte Black Finish

  With customization and economy of effort in mind, the 60/90 AMBI allows the end user the choice of selector switch degree to suit their personal shooting style. Whether you prefer short throw or a conventional selector switch lever; the SI 60/90 allows for easy configuration for strong side only or bilateral weapons manipulations. COMPATIBILITY: AR-15 / AR-10 forged and milled Mil-Spec Lowers  NOT COMPATIBLE: HAENEL and HECKLER & KOCH models With customization and economy of effort in mind, the 60/90 AMBI allows the end user the choice of selector switch degree to suit their personal shooting style. Whether you prefer short throw or a conventional selector switch lever; the SI 60/90 allows for easy configuration for strong side only or bilateral weapons manipulations. Package include:-x1 AR-HS-60/90-AMBI-x2 HEX ambidextrous selector switch w/mount-x1 End cap-x2 M3x6mm countersunk screws Features:-60/90 degree Ambi-Machined and Heat Treated-Custom HEX design-Groove cuts for secure grip

  The SI Carbine Flatwire Spring is an economical, easy upgrade to any ar system with a carbine buffer system. The flatwire spring increases service life of the platform, smooths out the shooting cycle, and greatly outlasts the stock spring. Increased bolt load, in addition to decreased compressing force increases reliability in cycling. COMPATIBILITY: AR-15 / AR-10 Mil-Spec and Commercial Buffer Tubes - Carbine Lenght NOT COMPATIBLE: Pistol and Rifle Lenght Buffer Tubes Product Specs:- OD: 0.94"- ID: 0.75"- Length: 13 7/8"- Rev: 35- Gauge (Flat Wire Profile): 0.045" x 0.0935" The SI Carbine Flat Wire Spring is an economical and easy upgrade to any AR system with a carbine buffer system.  The flatwire spring increases service life of the platform, smooths out the shooting cycle, and greatly outlasts the stock spring.  Increased bolt load, in addition to decreased compression force increases reliability in cycling.  Additionally, all SI Flat Wire springs are cryogenically stress relieved to provide greater consistency, longer spring life, and greater resilience to high cyclic rates.   At a cost not much greater than stock carbine springs, the SI Flatwire is an easy option for those either looking to replace worn buffer springs or begin new builds.   Package includes:- 1x Carbine Length Flat Wire Spring Features:- Cryo-cycled 17-7 ph steel for strength, reliability and longevity- Decreased harmonics lessens system vibration for faster follow up shots. - Increased bolt load for more positive feeding - Reduces distracting AR "twang"

  Strike Industries is proud to offer our very own Mil-Spec Forward Assist Assembly for the AR15/M16. Complete with spring and roll pin. This product is manufactured from high strength carbon steel and is heat treated. Perfect for upgrading your existing component or replacing worn or broken parts. Package Includes:- 1x Forward Assist Assembly- 1x Forward Assist Spring- 1x Forward Assist Roll Pin Features:- Includes the roll pin and spring- Made of high strength carbon steel

   The Enhanced Lower parts kit offers a convenient upgrade package for the AR15 for those looking for a complete Strike Industries solution for new builds, or to update their plain jane AR.  This kit includes all the basics that you will need to build out your AR (minus grip), but with Strike Industries Enhanced lower parts where applicable. This complete kit includes our fire control group which offers a crisp 5.5-8.5 lb pull, with unmatched smoothness for mil-spec style AR15 triggers.  Longitudinally ground and polished sear engagement surfaces coupled with precision cut sear angle equate a vastly improved trigger feel without sacrificing safety or reliability. COMPATIBILITY: AR-15: Mil-Spec lower receivers NOT COMPATIBLE:  -Bolt Catch, Bolt Catch Roll Pin, Pivot Pin and Takedown Pin are not compatible with AR-10 lower receivers -HAENEL and HECKLER & KOCH models Package includes: SI ENHANCED LOWER PARTS: - Enhanced Bolt Catch  - features improved grip surfaces and angles- Strike Magazine Catch - Strike Magazine Catch Button - Enhanced Pivot Pin - longer of the two large pins.- Enhanced Takedown Pin - smaller of the two large pins.- SI Selector Lever - 2 included in package- SI Selector End Plate- SI 60-90° 3-in-1 Selector Shaft - with screws SPRINGS:- Bolt Catch Spring - easily confused with the disconnector spring; disconnector spring is tapered though.- Buffer Retainer Spring - second largest coil type spring in the kit.- Disconnector Spring – slightly larger than bolt-catch spring, identifiable because one end is a little bit wide than the other.- Hammer Spring - largest of all the springs. - Magazine Catch Spring - this is the largest coil spring in the kit.- Pivot Detent Spring - same as the takedown detent spring, so there are two in a kit.- Selector Spring - similar to the takedown and pivot detent springs, but larger diameter; there will only be one of these.- Takedown Detent Spring - same as the pivot detent spring, so there are two in a kit.- Trigger Spring - the smaller of the two largest springs. PINS:- Bolt Catch Plunger – mushroom shaped pin- Bolt Catch Roll Pin - smaller of the two roll pins.- Hammer Pin – solid pin with machined grooves; can be inserted from either side.- Pivot Detent - same as takedown detent; both sides usually rounded or semi-conical.- Selector Detent - one end is flat, the other pointed/semi-conical.- Takedown Detent - same as pivot detent; both sides usually rounded.- Trigger Pin - same as hammer pin; can be inserted from either side.- Buffer Retainer  – large hollow barrel with small pin protruding from the top FIRE CONTROL GROUP:- Trigger: – Investment cast trigger, CNC machined, heat treated, phosphated, precision ground- Hammer: – Investment cast hammer, CNC machined, heat treated, phosphated, precision ground Features- Includes SI's signature Enhanced Lower Parts (AR-EBC, New improved SI-SMC, AR-EPTP, & AR-HS-60/90-3in1) - SI's Trigger Springs provide a consistent 5.5 ½ to 8 ½ lbs trigger pull with our fire control group

  The Enhanced Lower parts kit offers a convenient upgrade package for the AR15 for those looking for a complete Strike Industries solution for new builds, or to update their plain jane AR.  This kit includes all the basics that you will need to build out your AR (minus grip), but with Strike Industries Enhanced lower parts where applicable. COMPATIBILITY: AR-15: Mil-Spec lower receivers NOT COMPATIBLE:  -Bolt Catch, Bolt Catch Roll Pin, Pivot Pin and Takedown Pin are not compatible with AR-10 lower receivers -HAENEL and HECKLER & KOCH AR-15 models Package includes: SPRINGS: Bolt Catch Spring - easily confused with the disconnector spring; disconnector spring is tapered though. Buffer Retainer Spring - second largest coil type spring in the kit. Disconnector Spring – slightly larger than bolt-catch spring, identifiable because one end is a little bit wide than the other. Hammer Spring - largest of all the springs.  Magazine Catch Spring - this is the largest coil spring in the kit. Pivot Detent Spring - same as the takedown detent spring, so there are two in a kit. Selector Spring - similar to the takedown and pivot detent springs, but larger diameter; there will only be one of these. Takedown Detent Spring - same as the pivot detent spring, so there are two in a kit. Trigger Spring - the smaller of the two largest springs. PINS: Enhanced Bolt Catch  - features improved grip surfaces and angles Strike Magazine Catch  Strike Magazine Catch Button - features improved grip surface Enhanced Pivot Pin - longer of the two large pins. Enhanced Takedown Pin - smaller of the two large pins. SI Selector Lever - 2 included in package SI Selector End Plate SI 60-90° 3-in-1 Selector Shaft - with screws Bolt Catch Plunger – mushroom shaped pin Bolt Catch Roll Pin - smaller of the two roll pins. Hammer Pin – solid pin with machined grooves; can be inserted from either side. Pivot Detent - same as takedown detent; both sides usually rounded or semi-conical. Selector Detent - one end is flat, the other pointed/semi-conical. Takedown Detent - same as pivot detent; both sides usually rounded. Trigger Pin - same as hammer pin; can be inserted from either side. Buffer Retainer  – large hollow barrel with small pin protruding from the top ** Highlighted parts are SI exclusive ENHANCED components Features- Includes SI's signature Enhanced Lower Parts (AR-EBC, AR-SMC, AR-EPTP, & AR-HS-60/90-3in1)- SI's Trigger Springs provide a consistent 4 ½ to 5 ½ lbs trigger pull with our fire control group

    The SI Enhanced Bolt Catch is another piece in our line of high quality parts for the AR15. The SI AR-EBC features an extra wide bolt catch lever surface making its operation effortless. Its solid construction and clean matte black finish make it a great looking replacement or build project. It’s a great value for an essential item. If you need the parts to keep your AR in top shape, look no further than S.I. COMPATIBILITY: AR-15 / AR-10 forged and milled Mil-Spec Lowers NOT COMPATIBLE: HAENEL and HECKLER & KOCH models Package includes:1 x AR Enhanced Bolt Catch  Materials: Case Hardened Investment Cast 8620 per Mil-Spec  Features:-Mil-Spec bolt catch-Wide surface area bolt catch latch for enhanced operation-Solid steel construction-Sleek SI Design

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme material

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control. COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme material

  Introducing the next iteration of our Ultimate Dust Cover Line... Billet UDC. Featuring our quick detach mechanism that allows you to install or remove the dust cover in under 10 Seconds. It also includes an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power. Our patent pending noise-reduction padding also makes it nearly 100% silent during activation. Now available in heavy duty machined billet aluminum construction and in 2 anodized color lines (Black and FDE). Sleek, stylish, each to use, and durable. The Strike Industries Billet Ultimate Dust Cover the essential upgrade to your existing dust cover. *We strongly recommended applying blue Loctite threadlocker to the ball-detent thread after being adjusted. COMPATIBILITY: -AR-15 Mil-Spec upper receivers-Most billet AR-15 upper receivers-Aero Precision M4E1 NOT COMPATIBLE: AR-10 models VLTOR MUR: Modular Upper Receiver ZRO Delta Lantac Enhanced BCG due to carrier and bolt design Bootleg Four Position Adjustable Carrier

  Introducing the next iteration of our Ultimate Dust Cover Line... Billet UDC. Featuring our quick detach mechanism that allows you to install or remove the dust cover in under 10 Seconds. It also includes an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power. Our patent pending noise-reduction padding also makes it nearly 100% silent during activation. Now available in heavy duty machined billet aluminum construction and in 2 anodized color lines (Black and FDE). Sleek, stylish, each to use, and durable. The Strike Industries Billet Ultimate Dust Cover the essential upgrade to your existing dust cover. *We strongly recommended applying blue Loctite threadlocker to the ball-detent thread after being adjusted. COMPATIBILITY: -AR-15 Mil-Spec upper receivers-Most billet AR-15 upper receivers-Aero Precision M4E1 NOT COMPATIBLE: AR-10 models VLTOR MUR: Modular Upper Receiver ZRO Delta Lantac Enhanced BCG due to carrier and bolt design Bootleg Four Position Adjustable Carrier

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails SHORT:-LENGTH: 44.45mm (1.75")-WIDTH: 34.80mm (1.37")-HEIGHT: 63.50mm (2.50")-WEIGHT: 1.7 oz-WEIGHT W/ PKG: 2.6 oz

  The SI Anti-rotation/Anti-walk pin kit adds an extra degree of security to prevent your pins from walking out under fire or harsh use.  Toolless installation and disassembly allows for ease of maintenance, with no small screws to back out or become lost.  The smooth polished surface allows for a smoother trigger pull with standard trigger groups, and the additional retention is essential for drop in trigger packs.  QPQ nitrided high strength steel prevents corrosion and wear providing for a lifetime of use. Product Specs:- Weight:- Net: 0.2 oz - Gross: 0.4 oz - Materials: S45C - Finish: QPQ Nitride- Color: Black- Pin Diameter: 0.154 inches Package includes:- 2x Antiwalk/Antirotation Trigger/Hammer Pin- 1x AWP Clip Features- Tool less installation- QPQ Nitride for smooth function and long life- Polished surface improves trigger feel

   Our AMBI Magazine Release drops into any receiver designed to accept a mil-spec magazine catch. Low profile, and ergonomically designed, the mag-catch integrates with most receivers while being very easy to use and will not accidentally activate or interfere with other controls. The package also includes our enhanced Strike Magazine Release button and spring for a complete drop-in upgrade. For “wrong-handed” folks or for those that just want more options, the Strike Ambi-Mag Release is the perfect component to have. COMPATIBILITY: Mil-Spec AR-15 lower receivers and designed for receivers that accept mil-spec magazine catches only. NOT COMPATIBLE: HECKLER & KOCH and HAENEL models such as ASC OR STAG ARMS GI MAG  Features:- Allows ambidextrous activation of the magazine release- Drop-In replacement for ambidextrous use- Comes with Strike Magazine Release Button and spring- Compatible with standard AR15/M16 receiver specs. Package includes:1x ambi magazine catch1x magazine catch spring1x Strike magazine catchMADE IN THE USA

   The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove extra parts such as an endplate, castle nut and buffer tube. Simply rotate, and remove the pins as shown. Product Specifications: Size:- Pivot Pin:Length: 1.31”- Take Down Pin:Length: 1.08”- Weight (set): 0.52oz- Gross Packaged Weight: 0.7oz Materials: CNC SteelMADE IN THE USA