AR- Pistolengriffe

  The Strike industries cobra grip was developed using innovation and feedback from combat veterans. The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra “hood”. It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight. Shooters from all walks of life and different size hands can use the Strike Industries Cobra Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. It is very ergonomic and economical.  Product Spec: - Length:  4” - Weight:  1.4 oz

  The Strike industries cobra grip was developed using innovation and feedback from combat veterans. The cobra grip is made from advanced polymer which is very strong and will definitely take a beating. The shooter can use different grip techniques and allows the user to have a secure and comfortable grip in any situation or position. It features a ridged front face that allows you to brace the rifle against a table or a wall and because it is ridged, it will prevent any sliding during the recoil kick. Another unique feature is the Cobra “hood”. It acts like a heat shield that will prevent the heat from going to your hands and gives your lead hand an ergonomic platform to use. The rear portion of the Cobra Grip can function as a hand stop. One advantage that the SI Cobra Grip has over its competitors is the friction lock design. Material has been removed from the center so when tightening the Main Screw, it will allow it to grip the rail system and thus preventing any wobbling due to lose fitment or over use of the grip. The Strike industries Cobra grip is slim and low profile which makes it very light weight. Shooters from all walks of life and different size hands can use the Strike Industries Cobra Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. It is very ergonomic and economical.  Product Spec: - Length:  4” - Weight:  1.4 oz

  The Strike Industries AR Overmolded Enhanced Pistol Grip comes with a rubberized texture in three (3) different angles to suit any shooter's needs; 15, 20 and 25 degrees. Just like the Strike Industries Enhanced Pistol Grip, but now available with a rubberized overmolded surface which improves control of your weapon. The grip is more streamlined and tapered where the webbing of the hand goes to allow more range of movement of the firing hand when accessing the controls. It has enough width in the palm area to maximize comfort during extended use. Each grip features a comfortable beaver tail and secure storage underneath with an included rubber end cap. Get a solid and cozy hold of your gun now with the Strike Industries AR Overmolded Enhanced Pistol Grip. COMPATIBILITY: AR-15 and AR-10 lower receivers DISCLAIMER: Only x1 pistol grip per package. Package contents does not come with all three (3) grip angles. National Tactical Officers Association ApprovedNTOA Overall Rating: 4.18 The 25-degree grip has an aggressive angle similar to the traditional A2 grip. It’s meant for the traditional rifleman grip where the shooter would stand bladed and the shooting elbow is canted outwards. Package Contents:-x1 AR Overmolded Pistol Grip (15° or 20° or 25°)-x1 Pistol grip screw-x1 Crush washer-x1 Pistol grip plug Product Features:-Rubberized overmolded grip improves control-Meets a variety of needs with 3 available angles-Secure storage underneath with an included rubber end cap-Positive aggressive texture-Streamlined profile-Non-slip grip-Increased Comfort -LENGTH: 139.7mm (5.50")-WIDTH: 88.9mm (3.5")-HEIGHT: 42.42mm (1.67")-WEIGHT: 3.70 oz-WEIGHT W/ PKG: 4.00 oz

  The LINK Anchor Handstop is made from a heat resistant polymer that allows comfortable grip in any shooting condition. It has a low profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the handstop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to the fingertips. A true lightweight modification that is not only comfortable , has an aggressive look, and will improve accuracy over time by a stabilizing your grip. COMPATIBILITY: M-LOK and KeyMod RailsDISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Product Features:- Aggressive ergonomic grip with ridges to enhance dexterity- Low profile, light weight, heat resistant design- LINK attachment system- Multi-directional attachment capabilities Package Includes:1X - Link Anchor2X - Sets of LINK Screw & Nut1X - 3/32 HEX Tool1X - Warning card Product Specifications:Weight: .5ozHeight: 27mmWidth: 22mmLength: 75mmMaterial: Fiber filled 30% polymerFinish: EDM Texture

  The LINK Anchor Handstop is made from a heat resistant polymer that allows comfortable grip in any shooting condition. It has a low profile design that allows mounting through any MLOK or KeyMod openings. The unique tooth design allows the handstop to be reversible, giving the option for either a "push" or "pull" style grip. With the added ridges on the surface, the LINK Anchor provides unmatched dexterity from your palm to the fingertips. A true lightweight modification that is not only comfortable , has an aggressive look, and will improve accuracy over time by a stabilizing your grip. COMPATIBILITY: M-LOK and KeyMod RailsDISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Product Features:- Aggressive ergonomic grip with ridges to enhance dexterity- Low profile, light weight, heat resistant design- LINK attachment system- Multi-directional attachment capabilities Package Includes:1X - Link Anchor2X - Sets of LINK Screw & Nut1X - 3/32 HEX Tool1X - Warning card Product Specifications:Weight: .5ozHeight: 27mmWidth: 22mmLength: 75mmMaterial: Fiber filled 30% polymerFinish: EDM Texture

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme material

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control. COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme material

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails SHORT:-LENGTH: 44.45mm (1.75")-WIDTH: 34.80mm (1.37")-HEIGHT: 63.50mm (2.50")-WEIGHT: 1.7 oz-WEIGHT W/ PKG: 2.6 oz

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails SHORT:-LENGTH: 44.45mm (1.75")-WIDTH: 34.80mm (1.37")-HEIGHT: 63.50mm (2.50")-WEIGHT: 1.7 oz-WEIGHT W/ PKG: 2.6 oz

15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip. Specifications: 15 degree angleTab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desiredDesigned for M16/M4/AR15/HK41Weight: 2.2ozHeight: 5.025"Width: 1.22"Length: 3.043"MADE IN THE USA

There is little doubt that vertical foregrips have become a valued tactical accessory in military, law enforcement and civilian arenas. They provide the operator with several important advantages, from diminishing muzzle climb during burst-fire sequences to simply offering a more stable and comfortable shooting stance. The GG&G Vertical Rail Grip fits Picatinny and standard dovetail rails. It has always provided more than other standard vertical grips on the market - the highest quality of course, as well as a core with a waterproof compartment to store batteries and other small items. Attention LE And Military purchasing agents: Please reference GG&G part number and Nato Stock Number: NSN-1005-01-567-5573 when ordering this component. Vertical Rail Grip Specifications: Very stable, easy to install on dovetail rails. Waterproof compartment will accommodate an AR-15 spare bolt."O" ring sealed, waterproof compartment is configured to securely hold a spare bolt in place with NO RATTLING.Tool-less access to the compartment.Waterproof compartment has a Tri-grip cap designed to be non snag and allowing it to be opened with a gloved hand.A separate "O" ring seals the threaded core from the combat environment.Without the spare bolt, the compartment is large enough to securely hold two AA batteries or 2 CR123 batteries.Firing pins, ejectors, extractors or other small replacement parts can be stored in the compartment, but the user will need to pack additional material so as to eliminate rattling.The GG&G AR-15 Forward Grip does not require any special tools for installation or adjustment in the field.The rugged, heavy duty GG&G Vertical Foregrip is 4.5" in length, weighs only 2.7 oz and is 1.250" in diameter.This Vertical Grip for dovetails is manufactured from black acetal polymer.Made In America By Men And Women Proud To Be Americans!

A vertical grip for the AR-15, M-16, and AR-10 rifles or breaching shotguns, or any other type of rifle or firearm you own, is a valued tactical accessory in civilian , military and law enforcement arenas. The simple and easy to install AR-15 Short Vertical Grip provides the user with several important advantages, from diminishing muzzle climb during burst-fire sequences to simply offering a more comfortable shooting stance. The GG&G Short Vertical Grip is Mil-Std-1913 compliant and has become a very popular alternative to our popular Standard Length Vertical Grip.  The Short Vertical Grip fits all Mil-Std-1913 rails and rail systems. Short Vertical Grip Specifications Low profile ergonomic design without sacrificing functionality.Perfect for keeping CQB style weapons as compact as possible.The Short Vertical Grip is designed for use with mil-spec-1913 rails.Ideal for M4 carbines and Breaching shotguns.Excellent for use as a " reference point " or for the " thumb-break " style of shooting.Provides for a comfortable, secure grasp for outstanding recoil control and ultra fast point-ability.No tools required for installation or adjustment in the field.The GG&G Short Vertical Grip is manufactured from solid black Acetal cold polymer for durability and low heat absorption.Alignment window to aid in installation.Lightweight at only 2.8oz.3 3/16 inches long.Made In America By Men And Women Proud To Be Americans!

  M-LOK® compatible Barricade Stop with aggressively textured front for enhanced traction on barricades and obstacles. Low profile base can also function as a comfortable Hand Stop. Specs: Aggressive textured front for enhanced traction on barricades and obstacles Low profile base also functions as a comfortable hand stop Black anodized 6061-T6 aluminum 2.00″ long x 1.1″ tall x .77″ wide M-LOK® CompatibleMADE IN THE USA

The Tactical Deluxe with Palm Shelf is the same size and shape as the Tactical Deluxe grip but has the addition of an adjustable palm shelf to support your firing hand. This grip excels on precision rifles. Overmolded SUREGRIP® material with heavy texture for a secure and comfortable grip. Specifications Fits AR-type firearms in .223 and .308Overmolded SUREGRIP® material with heavy textureERGO SURE GRIP® rubber textureAmbidextrous palm swellAdjustable palm shelfDoes not include a plug, NOT compatible with 4935 plug.Includes Installation Hardware PackFAQ – The Palm Shelf CANNOT be added to the 4045 and CANNOT be purchased separately. MADE IN THE USA

  ERGO’s classic Tactical Deluxe Flat Top is now available in a zero angle grip. Designed for improved comfort and control on precision rifle chassis systems and AR-15/AR-10 platforms. The new grip puts your hand in a better angle for modern shooting positions.  Compatible to Precision Rifle Chassis Systems and AR-15 / AR-10  Purpose made to fit precision Bolt Action Rifles, AR-15/AR-10, Chassis Systems, and all fire-arms that accept AR-15 style grips. Includes Installation Hardware Pack  Overmolded SUREGRIP® material with heavy texture Ambidextrous with ergonomic contours and palm swell Made in the USA with lifetime guarantee Does NOT include a plug  MADE IN THE USA

  This grip was purchased by the U.S. Military for use on the original SPR and MK 12 rifles in 2001. The original Ergo Grip, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the proprietary Gapper™ for increased comfort and Installation Hardware Pack. Fits AR-15/AR-10 type firearms  Rigid Hard Polymer material Ergonomically correct finger grooves Integrated rear upper extension supports the web of your hand Superior Rhino Hide® texture improves weapon control Virtually impervious to oils and solvents Comes with The Gapper™ Includes Installation Hardware Pack  This grip only comes in black. *Dual use compatible with shotgun adapter #4453 and #4454 MADE IN THE USA

  The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.  With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. RUBBER OVERMOLD ON REINFORCED POLYMER CONSTRUCTION All mounting hardware included.TECHNICAL SPECIFICATIONS Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degrees Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Weight 3.4 oz. Other Specs *NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  Compatible with all M1913 Picatinnyrail handguards as well as all Picatinnyrail adapters from a length of 76mm / (8-slots). For compatible adapters, see accessories under this article. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All mounting hardware included. Features Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) All mounting hardware includedMADE IN THE USA

  Compatible with all M1913 Picatinnyrail handguards as well as all Picatinnyrail adapters from a length of 76mm / (8-slots). For compatible adapters, see accessories under this article. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All mounting hardware included. Features Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) All mounting hardware includedMADE IN THE USA

Minimalist profile for use as either a forward grip or hand stop. Designed for a comfortable wrist angle when utilizing a thumb over bore shooting stance. Specifications: Model: KeyMod InterfaceCompatible with KeyMod handguards and KeyMod interfacesNOT compatible with M-LOK® handguards or M-LOK® interfaces.Swept back angled design for thumb over bore shooting stanceIncreased comfort for web of hand when used as a gripHigh density, durable, lightweight polymer construction with subtle texturing on the sides, with front and back serrationsErgonomic design to fit most hand sizesSteel hardware included, compatible with KeyMod accessories only

Finger swells are textured and the grooved backstraps provide a positive grip surface with wet or gloved hands Specifications: Tab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desiredFinger swells and a grooved backstrap provide a non-slip gripSecure water resistant storage compartmentPlug retention for one handed storage accessCustomizable storage system with quick access tab diminishes rattleWeight: 2.4ozHeight:4.804Width: 1.22"Length:3.420"MADE IN THE USA

Finger swells are textured and the grooved backstraps provide a positive grip surface with wet or gloved hands Specifications: Tab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desiredFinger swells and a grooved backstrap provide a non-slip gripSecure water resistant storage compartmentPlug retention for one handed storage accessCustomizable storage system with quick access tab diminishes rattleWeight: 2.4ozHeight:4.804Width: 1.22"Length:3.420"MADE IN THE USA

15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip. Specifications: 15 degree angleTab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desiredDesigned for M16/M4/AR15/HK41Weight: 2.2ozHeight: 5.025"Width: 1.22"Length: 3.043"MADE IN THE USA

  Interchangeable textured finger swells (3pcs) and back straps (3pcs) provide a positive grip surface with wet or gloved hands and allow the user to customize the fit. A combination of fit and function unequaled by the originally supplied M16/AR15/M4/HK416 pistol grip.  Specifications: NSN: 1005226366804Designed for M16/M4/AR15/HK416Any combination of interchangeable back straps and finger swells allow for a custom fit for any sized handGrip angle replicates M16 while not affecting trigger contactSecure water resistant storage compartmentCustomizable storage system with quick access tab diminishes rattleWeight:3.7ozHeight: 4.847"Width: 1.220"Length: 3.196"MADE IN THE USA