AR- Verschlussträger / Umrüstsätze
Polished Nickel Boron M16/AR-15 Complete Bolt Carrier. Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer. ANDERSON MANUFACTURING SPECS: MIL-SPEC Diameter Production M16 Profile Included staked Nickel Boron Gas Key Forward Assist Serrations Finish: Polished Nickel Boron for best gliding properties Compatible with AR-15 MIL-SPEC Upper Receivers Compatible with AR-15 MIL-SPEC bolts in caliber .223 REM/5.56 NATO, .300 AAC Informations: Compatible accessories, see accessories under this article 100% AMERICAN MADE. 100% ANDERSON.
Polished Nickel Boron AR-10 Complete Bolt Carrier. This Bolt Carrier works on the DPMS GEN1 / LR-308 / SR25 platform, like AM-10 and AERO PRESION M5 for pattern rifles chambered in .308 WIN/7.62 Nato , 6.5 Creedmoor, .243, 7mm-08, .338 Federal, .260 Remington ANDERSON MANUFACTURING SPECS: Auto Profile Included staked Nickel Boron Gas Key Finish: Polished Nickel Boron for best gliding properties Forward Assist Serrations Informations: Not compatible to DPMS GEN2 Upper Receivers! Not compatible to ARMALITE Upper Receivers! Not compatible to DAR, H&K, HAENEL and other Clones! Compatible accessories, see accessories under this article 100% AMERICAN MADE. 100% ANDERSON.
SPECS: MIL-SPEC Diamter Production Chrome Lined M16-Profile Finish: Phosphate Included Gas Key Forward Assist Serrations Compatible to M16 / AR-15 Mil-Spec Upper receivers & bolts MADE IN THE USA
Nitrided M16/AR-15 Complete Bolt Carrier. SPECS: MIL-SPEC Diameter Production M16 Profile Included staked Gas Key Finish: Smooth nitrided surface for best gliding properties Compatible with AR-15 MIL-SPEC Upper Receivers Compatible with AR-15 MIL-SPEC bolts in caliber .223 REM/5.56 NATO, .300 AAC 100% AMERICAN MADE. 100% ANDERSON.
Adjustable P Series Micro Piston Conversion Kit for Carbine Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Conversion Kit for Mid Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Conversion Kit for Pistol Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Conversion Kit for Rifle Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Conversion Kit for .300 BLK Pistol Lenght DI Gas Systems This system will work with .300 AAC/.300 BLACKOUT and SUBSONIC ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Extended Gas ports Bolt Spring Drive Rod with Rod Bushing and Rod Lightened Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: *We only guarantee the reliable cycling of Sub-Sonic ammunition with the use of a suppressor. As 300 Blackout is not a mil-spec cartridge, some tuning may be necessary depending on grain weight and suppressor used. We recommend barrels longer than 7.5″ Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Low Mass Conversion Kit for Carbine Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Low Mass Conversion Kit for Mid Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Low Mass Conversion Kit for Pistol Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Adjustable P Series Micro Piston Low Mass Conversion Kit for Rifle Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Spare or replacement AR15 Low Mass Piston Bolt Carrier for use with Adams Arms Piston Kits, Uppers and Rifles. Compatibel with all Adams Arms Piston Systems only! SPECS 21% lighter than AA standard bolt carrier (7.5oz) Machined from our proprietary 8620 forging Patented One-Piece Low Mass Bolt Carrier DLC coated, very smooth finish Low wear MADE IN THE USA
Spare or replacement AR15 Piston Bolt Carrier for use with Adams Arms Piston Kits, Uppers and Rifles. Compatibel with all Adams Arms Piston Systems only! SPECS Weight 9.5oz Machined from our proprietary 8620 forging Patented One-Piece Bolt Carrier DLC coated, very smooth finish Low wear MADE IN THE USA
Original ArmaLite® Bolt Carrier, auto version, for AR15, M16, M4 firearm upgrades or new premium builds. Chrome lined Bolt Carrier and Chrome lined Gas Carrier, machined from the correct Mil-Spec Carpenter No. 158® steel and machined to original USGI specifications. Specifications: For caliber: .223 Rem/5.56 Nato/.300 AAC Blackout Compatible to M15/AR-15/M4/M16 models Spec: Auto Profile Chrome lined Bolt Carrier Chrome lined Gas Key Machined to USGI specifications Made from No. 158® Steel Finish: Mil-Spec phosphate coating Gas Key with Grade 8 fasteners with a Torque from 55 inch lbs Gas Key properly staked per Mil-Spec Specifications Heat treated Forward Assist Serrations 100% Made in the USA
Dynamic Arms Research Bolt Carrier, kompatibel zu AR-15 Direct Impingement Modellen mit Fertigung nach Mil-Spec Diameter im Kaliber .223 REM/5.56 NATO sowie 300 AAC Blackout. MADE IN GERMANY Der Dynamic Arms Research Bolt Carrier von Dynamic Arms Research wird aus hochvergütetem 42CrMo4 Stahl in Mil-Spec Abmessungen hergestellt und verfügt über eine Tenifer – QPQ – Oberflächenveredelung die ihn vor übermäßiger Reibung und Verschleiß schützt, zusätzlich ist er im vorderen Bereich vielfach feinkantig gefräßt um den Reibwiderstand zu reduzieren, der Verschluss arbeitet somit leichter und schneller. Gegenüber konventionellen Beschichtungsverfahren, wie brünieren oder phosphatieren, hat die Tenifer QPQ Oberflächenveredelung mehrere entscheidende Vorteile. Tenifer QPQ nitrieren ist keine Oberflächenbeschichtung im klassischen Sinn. Das Bauteil erfährt hier keine Maßänderung in Form von einem Auftrag. Es bildet sich in den Randschichten des Materials eine Verbindungsschicht, welche in das Metall hineinwächst. Dies hat zur Folge, dass sich nach der Bearbeitung die Toleranzen nicht verändern. Die Oberflächenhärte nimmt durch die Behandlung stark zu, zugleich ergibt sich eine hervorragende Verschleißfestigkeit und die Steifigkeit des Bauteils wird erhöht. Hochlegierte Werkzeugstähle können Oberflächenhärten von über 1.000 HV erreichen. Ebenfalls wird die Oberflächenrauigkeit reduziert und der Reibwert herabgesetzt. Ein weiterer wichtiger Punkt ist die herausragende Korrosionsbeständigkeit. Durch die Oxidationsbäder des QPQ Vorgangs werden die Poren des Stahls mit Magnetit angereichert, was einen ultimativen Schutz gegen alle Umwelteinflüsse nach sich zieht. Bei D.A.R. werden sämtliche Stahlteile mit der Tenifer QPQ Beschichtung veredelt. Alle behandelten Teile werden dadurch extrem verschleißarm, sind hervorragend gegen Korrosion geschützt und lassen sich außerdem gut reinigen. Details/Angebotsumfang: Kompatibel für AR-15 Direct impingement Modelle nach Mil-Spec Diameter Fertigung Kompatibel für AR-15 Modelle im Kaliber .223 REM / 5.56 NATO / .300 BLK Kompatibel zu allen Carbine und Rifle Length Buffer und Buffer Springs Forward Assist Serrations Inklusive staked Gas Key High Performance Made by D.A.R. Germany
Hochwertiger Bolt Carrier von FAXON Firearms, nach militärischen Spezifikationen und Standards gefertigt. Seeing "MIL-SPEC" as just the starting point, we set out to ensure the best options are available for our demanding customers. Faxon Bolt Carrier are Superfinished to reduce friction, increase smoothness of operation, and reduce fouling. Further, they are full-Auto rated and maintain the trip for full-auto fire control groups and new multi-stage trigger systems. Gas keys use grade 8 fasteners and are fully staked for a lifetime of service. Detailed Specifications: Full MIL-SPEC Heat Treatment Material: 8620 Steel M16 Profil Shot Peened to MIL-SPEC Magnetic Particle Inspection (MPI) Back of Lugs Chamfered for Reliability Salt Bath Nitrided Bolt & Carrier Superfinished Carrier Body Full Auto Compatible Forward Assist Serrations OEM Manufacturing Compatible with all AR-15 MIL-SPEC Upper Receivers MADE IN THE USA