Magazin Zubehör

  The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight. Made in the USA Specs Compatibility: AR15, M4, M16,  NOT compatible with HECKLER & KOCH and HAENEL models

  The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines. It incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Loop is made of pliable Santoprene rubber overmolded onto a stainless steel plate. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. SPECS NSN: MAG020-BLK 1005-01-560-2100 NSN: MAG020-FDE 1005-01-616-4912 NSN: MAG020-ODG 1005-01-616-4900 Technical Specifications More Information Platform AR15, M4, M16 Compatibility USGI 30-round aluminum magazines MADE IN THE USA

  Designed to considerably improve the speed and efficiency of the AR15/M4 bolt catch, the B.A.D. (Battery Assist Device) Lever quickly addresses reloading and malfunction clearance shortcomings of the platform by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control / ready position with the right-hand trigger finger.Designed around Mil-spec forged upper and lower receivers*, the anodized aluminum B.A.D. Lever attaches to the standard AR15/M4 bolt catch without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M4 manual of arms. All mounting hardware included. MADE FROM MIL-SPEC ANODIZED ALUMINUM Machined from durable billet 6061-T6 aluminum Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw per MIL-DTL-16232G Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included) ATTACHES TO THE AR15/M16 BOLT-RELEASE WITHOUT PERMANENT WEAPON MODIFICATION Attaches to the existing bolt catch paddle via one screw COMPATIBLE WITH MIL-SPEC FORGED UPPERS AND LOWERS* Thin, anti-snag profile and textured surface still allows for traditional manipulation of the bolt catch while maintaining unobstructed access to the trigger TECHNICAL SPECIFICATIONS More Information Platform AR15, M4, M16 Other Specs *NOTE: Not compatible with 7.62x51 (.308 Winchester) firearms as well as most AR15 billet or polymer lower and upper receivers due to their larger and/or non-standard dimensions. MADE IN USA

  When installed on the base of a 5.56x45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines Compatible accessories see under this article, accessories. TECHNICAL SPECIFICATIONS  Platform: AR15, M4, M16 Compatibility: Most aluminum, steel, and polymer 5.56 x 45 magazines MADE IN THE USA

 Only compatibel to MAGPUL GEN M3 Magazines NOT compatibel to MAGPUL GEN M2 or other  Magazines   The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger Plate. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes. MAG564 PMAG Ranger Plate™ – LR/SR GEN M3, 3 Pack Installation Instructions More Information Platform AR10, M110, SR25 Compatibility 7.62x51 LR/SR GEN M3 PMAGs Other Specs NOTE: This Ranger Plate is a dedicated fit for all 7.62x51 LR/SR GEN M3 PMAGS. Will NOT fit the older PMAG 20LR magazine, any 5.56x45 or 7.62x39 PMAGS, or any metal magazine.

Introducing the TTI Gen-12 +3 Basepad  – the essential upgrade for your GEN-12 Dracarys! Adding 3 rounds to your existing 10-round magazine, it boosts capacity to 13 rounds. Crafted for durability and precision, this extension ensures reliable performance. Whether in competition or defense, it gives you the firepower edge you need. Upgrade your shotgun with the TTI Gen-12 Basepad and elevate your shooting game. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. Compatible accessories, see under this article accessories

The +2 magazine extension is manufactured by Taylor Freelance, and is optimized for use with the 10 round magazine.  The newest line of extensions from TF have lightening cuts which reduced the weight by ~1/2 oz and they look badass! Features Machined 6061 AluminiumHarcoat Anodized MIL-A-8625F Type III / Color as ShownThumbscrew and gasket retention lets you choose-- finger tight for quick on-off or screwdriver tight for maximum security. No need to swap springs, the TF +2 extension utilizes the spring from the host magazine. Notice The TF extensions were designed to work primarily with the GEN-12 10 round magazines. The extension will work on the 5 round magazine, but they were not intended to be, and feeding is not guaranteed on the 5 round magazines. Magazine not included

  M1 Carbine Jungle Clip, minimale Gebrauchsspuren, Made in USA.

  The 3mm is our low-profile extension for the Staccato/Springfield Prodigy/Atlas/Infinity 9/38 2011 style magazine. Leaving in the factory spring and follower it will be a +1 on a 126, 140 and 170mm magazine. Although it will work on all 2011 magazines, its recommended as a low-profile pad for the 126 magazine to bump it from 17 to 18 rounds. And for the 170mm competition magazine big sticks it bumps it from 26 to 27. If you use our competition thin follower and extra power 13 coil spring it bumps it to 29 and still fits the 170mm USPSA gauge (but will not slide lock on last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA

  This Taran Tactical Innovations base pad works on Sig Sauer P320 Full Size 17/21 round 9mm and 14/18 round .40 S&W Full Size Magazine Bodies.  This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI SIG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Due to magazine variances, some magazines may require slight modification to fit the 140mm gauge. * * Remove the metal insert at the bottom before installation * * This base pad is compatible with the stock P320 X5 magwell * * Remove the metal insert at the bottom before installation * * NOT compatible with carry size frames * * Magazine NOT included *  TTI FIREPOWER +1 BASE PAD FOR FULL SIZE SIG P320 AND FULL SIZE X5 IS COMPATIBLE WITH:  17 and 21 Round 9mm Magazine 14 and 18 Round 40 S&W Magazine  SIG P320 +1 BASE PAD IS DESIGNED TO WORK WITH STOCK MAGAZINE SPRINGS.  Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.Made in the USA.

  The 7mm is our longest extension for the Staccato/Infinity/Springfield Prodigy/Atlas/Infinity/MBX 9/38 2011 style magazine and Bul Armory SAS II Pistols. Although it will work with all 2011 style magazines it is recommended for the 140mm Magazines for Open/Unlimited division and the 126mm because that’s what John Wick will do. On the 140mm magazine, the 7mm extension bumps the capacity from 20 rounds to 22 rounds with the factory spring and follower. For even more added capacity, use our thin competition follower and extra power 11 coil spring for an impressive 24 round capacity (but will not lock the slide to the rear on the last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA

  The 4mm is our mid profile extension for the Staccato/Infinity/Springfield Prodigy/Atlas/Infinity 9/38 2011 style magazine. Although it will work on all 2011 style magazines, it is recommended for the 140mm magazine. It brings the capacity up from 20 rounds to 22 rounds with the factory spring and follower and still fits the USPSA 140mm gauge. If you want even more added capacity use our thin competition follower and extra power 11 coil spring to bump the capacity up to 23 rounds (but will not lock the slide to the rear on the last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 31 and 33 round OEM Magazines, + 10% stronger Magazine Spring included. Holds 34 rounds of 9mm in 31 round Magazine (+1 round extra in Chamber). Holds 34 rounds of 9mm in 33 round Magazine (+1 round extra in Chamber). GLOCK 9MM +3 PCC ** Remove the plastic insert at the bottom before installation ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES! ** ** WILL NOT WORK WITH GLOCK 17 OR 19 MAGAZINES! ** ** WILL NOT work with KCI or ETS magazines ** ** GLOCK OEM Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK. The +3 Base Pad includes a +10% stronger spring with purchase. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.Made in the USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. Weighs 1.6 OZ This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 31 and 33 round OEM Magazines, + 10% stronger Magazine Spring included. Holds 34 rounds of 9mm in 31 round Magazine (+1 round extra in Chamber). Holds 34 rounds of 9mm in 33 round Magazine (+1 round extra in Chamber). GLOCK 9MM +3 PCC ** Remove the plastic insert at the bottom before installation ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES! ** ** WILL NOT WORK WITH GLOCK 17 OR 19 MAGAZINES! ** ** WILL NOT work with KCI or ETS magazines ** ** GLOCK OEM Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK. The +3 Base Pad includes a +10% stronger spring with purchase. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.Made in the USA. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. Weighs 1.6 OZ This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 19/23, +4/5 rounds more, Magazine Spring included. Holds 20 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 17 rounds of 40S&W in Magazine (+1 round extra in Chamber).  GLOCK 19/23 +4/5 ** Remove the metal insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES! ** ** Will work with ETS 15 Round 9mm magazines ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK. The +4/5 Base Pad comes with a +10% stronger spring. Overall weight 1.5oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 17 rounds of 40S&W in Magazine (+1 round extra in Chamber).  Holds 20 rounds of 9mm in Magazine (+1 round extra in Chamber). The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Made in the USA. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The Taran Tactical Innovations GLOCK +4/5 base pad works on GLOCK models 19/23. This base pad will add 5 extra rounds in 9mm and 4 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 19/23, +4/5 rounds more, Magazine Spring included. Holds 20 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 17 rounds of 40S&W in Magazine (+1 round extra in Chamber).  GLOCK 19/23 +4/5 ** Remove the metal insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES! ** ** Will work with ETS 15 Round 9mm magazines ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK. The +4/5 Base Pad comes with a +10% stronger spring. Overall weight 1.5oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 17 rounds of 40S&W in Magazine (+1 round extra in Chamber).  Holds 20 rounds of 9mm in Magazine (+1 round extra in Chamber). The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Made in the USA. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The Taran Tactical Innovations GLOCK +4/5 base pad works on GLOCK models 19/23. This base pad will add 5 extra rounds in 9mm and 4 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 19/23, +2/3 rounds more, Magazine Spring included. Holds 18 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 15 rounds of 40S&W in Magazine (+1 round extra in Chamber).  GLOCK 19/23 +2/3 ** Remove the metal insert at the bottom before installation ** ** This product will ONLY work on Glock 19 and Glock 23 firearms! ** ** This product will ONLY work on the Compact 9mm and .40 cal Glock OEM magazines! ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES, ASIDE FROM OUR +0 BASE PADS ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK OEM MAGAZINES. Overall weight 0.8oz. Length, 1/2 inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Works only on high-cap double stacked GLOCK OEM magazines. Holds 15+1 rounds of 40S&W. Holds 18+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.MADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. The Taran Tactical Innovations GLOCK +2/3 base pad works on GLOCK models 19/23. This base pad will add 3 extra rounds in 9mm and 2 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 19/23, +2/3 rounds more, Magazine Spring included. Holds 18 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 15 rounds of 40S&W in Magazine (+1 round extra in Chamber).  GLOCK 19/23 +2/3 ** Remove the metal insert at the bottom before installation ** ** This product will ONLY work on Glock 19 and Glock 23 firearms! ** ** This product will ONLY work on the Compact 9mm and .40 cal Glock OEM magazines! ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES, ASIDE FROM OUR +0 BASE PADS ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK OEM MAGAZINES. Overall weight 0.8oz. Length, 1/2 inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Works only on high-cap double stacked GLOCK OEM magazines. Holds 15+1 rounds of 40S&W. Holds 18+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.MADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. The Taran Tactical Innovations GLOCK +2/3 base pad works on GLOCK models 19/23. This base pad will add 3 extra rounds in 9mm and 2 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 21/41, +4 rounds more, 10% stronger Magazine Spring included. Holds 17 rounds of .45 ACP in Magazine (+1 round extra in Chamber). GLOCK 21/41 ** Remove the polymer insert at the bottom before installation ** ** Will NOT work with 10mm ammo. Our extensions are designed to work specifically with their intended magazine, the slightest off-angle may cause failure to feed or other malfunctions ** ** Will NOT function with early generation Glock mags that have u-notch cut feed lips. ** ** WILL NOT WORK WITH SUBCOMPACT MAGAZINES (G30/G30S/G30SF/G36) ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK OEM MAGAZINES. +10% stronger spring included. Overall weight 1.7oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Patented proven push pin design. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 17+1 rounds of .45ACP. The added weight helps the magazine drop free easier for faster reloads. CNC machined from billet aluminum. Hard Anodized.MADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. This Taran Tactical Innovations GLOCK base pad works on GLOCK models 21/41. This TTI base pad will add 4 extra rounds of .45 ACP to the magazine. This base pad does adds a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 21/41, +4 rounds more, 10% stronger Magazine Spring included. Holds 17 rounds of .45 ACP in Magazine (+1 round extra in Chamber). GLOCK 21/41 ** Remove the polymer insert at the bottom before installation ** ** Will NOT work with 10mm ammo. Our extensions are designed to work specifically with their intended magazine, the slightest off-angle may cause failure to feed or other malfunctions ** ** Will NOT function with early generation Glock mags that have u-notch cut feed lips. ** ** WILL NOT WORK WITH SUBCOMPACT MAGAZINES (G30/G30S/G30SF/G36) ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK OEM MAGAZINES. +10% stronger spring included. Overall weight 1.7oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Patented proven push pin design. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 17+1 rounds of .45ACP. The added weight helps the magazine drop free easier for faster reloads. CNC machined from billet aluminum. Hard Anodized.MADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. This Taran Tactical Innovations GLOCK base pad works on GLOCK models 21/41. This TTI base pad will add 4 extra rounds of .45 ACP to the magazine. This base pad does adds a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Firepower Base Pad Kit for Glock 21/41, +4 rounds more, 10% stronger Magazine Spring included. Holds 17 rounds of .45 ACP in Magazine (+1 round extra in Chamber). GLOCK 21/41 ** Remove the polymer insert at the bottom before installation ** ** Will NOT work with 10mm ammo. Our extensions are designed to work specifically with their intended magazine, the slightest off-angle may cause failure to feed or other malfunctions ** ** Will NOT function with early generation Glock mags that have u-notch cut feed lips. ** ** WILL NOT WORK WITH SUBCOMPACT MAGAZINES (G30/G30S/G30SF/G36) ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK OEM MAGAZINES. +10% stronger spring included. Overall weight 1.7oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Patented proven push pin design. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 17+1 rounds of .45ACP. The added weight helps the magazine drop free easier for faster reloads. CNC machined from billet aluminum. Hard Anodized.MADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. This Taran Tactical Innovations GLOCK base pad works on GLOCK models 21/41. This TTI base pad will add 4 extra rounds of .45 ACP to the magazine. This base pad does adds a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Competition Base Pad for Glock 17/17L/19/19X/22/23/24/26/27/31/32/33/34/35/45 models. GLOCK 9/40 +0 COMPETITION ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** NOT compatible for Glock 43X/48 firearms ** ** GLOCK Magazine NOT included ** TTI COMPETITION BASE PAD KIT FOR GLOCK OEM MAGAZINES. Designed to work with stock Glock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 1.6oz. Length, 1/2 Inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Weight 1.6 OZMADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. *The Taran Tactical Innovations GLOCK +0 base pad works on GLOCK models 17/ 17L /19 /19X/26 /22 /23 /24 /27 /31 /32 /33 /34 /35/45* This GLOCK base pad does not add any extra rounds to the magazine, it does add extra weight to magazine which helps the empty mag drop free easier for faster reloads. Since this base pad does not add capacity to your magazine it is perfect for people that live in states with high-capacity laws. The TTI GLOCK base pad, just like all of our base pads are designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazines between stages. Just push the down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Competition Base Pad for Glock 17/17L/19/19X/22/23/24/26/27/31/32/33/34/35/45 models. GLOCK 9/40 +0 COMPETITION ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** NOT compatible for Glock 43X/48 firearms ** ** GLOCK Magazine NOT included ** TTI COMPETITION BASE PAD KIT FOR GLOCK OEM MAGAZINES. Designed to work with stock Glock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 1.6oz. Length, 1/2 Inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Weight 1.6 OZMADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. *The Taran Tactical Innovations GLOCK +0 base pad works on GLOCK models 17/ 17L /19 /19X/26 /22 /23 /24 /27 /31 /32 /33 /34 /35/45* This GLOCK base pad does not add any extra rounds to the magazine, it does add extra weight to magazine which helps the empty mag drop free easier for faster reloads. Since this base pad does not add capacity to your magazine it is perfect for people that live in states with high-capacity laws. The TTI GLOCK base pad, just like all of our base pads are designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazines between stages. Just push the down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

  Taran Tactical Innovations Competition Base Pad for Glock 17/17L/19/19X/22/23/24/26/27/31/32/33/34/35/45 models. GLOCK 9/40 +0 COMPETITION ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** NOT compatible for Glock 43X/48 firearms ** ** GLOCK Magazine NOT included ** TTI COMPETITION BASE PAD KIT FOR GLOCK OEM MAGAZINES. Designed to work with stock Glock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 1.6oz. Length, 1/2 Inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Weight 1.6 OZMADE IN THE USA Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. *The Taran Tactical Innovations GLOCK +0 base pad works on GLOCK models 17/ 17L /19 /19X/26 /22 /23 /24 /27 /31 /32 /33 /34 /35/45* This GLOCK base pad does not add any extra rounds to the magazine, it does add extra weight to magazine which helps the empty mag drop free easier for faster reloads. Since this base pad does not add capacity to your magazine it is perfect for people that live in states with high-capacity laws. The TTI GLOCK base pad, just like all of our base pads are designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazines between stages. Just push the down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.