Magazine hohe Kapazität
This Taran Tactical Innovations .308 PMAG base pad works on any .308 20 or 25 round PMAG magazine. Magazine NOT included. Compatible accessories see under this article, accessories. This TTI base pad will add 5 extra rounds to a PMAG 20 round magazine and extra 6 rounds in a 25 round PMAG magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI .308 PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. *Remove the metal insert at the bottom before installation* *Will only work on Gen 3 PMAG Magazines* PMAG Base Pad For AR10 .308 TTI Firepower PMAG Magazine Extension Specs: Designed to work with stock spring.Overall weight 4.16oz.Length, 3.5 inch.Patented, proven push-pin design.Easily attaches and detaches from the magazine.No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and plastic follower and slide on the extension.One piece design; no small parts to keep track of.Minimal length addition to allow usage while in a prone position.Holds 25+1 rounds on the PMAG20.Holds 31+1 rounds on the PMAG25.The added weight helps the magazine drop free easier for faster reloads.CNC machined from billet aluminum.Hard anodized.Made in the USA.
The PMAG® D-50 is a durable, lightweight, highly reliable 50-round 5.56x45NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than the average PMAG, the PMAG D-50 gives shooters 50 rounds of ammunition before requiring a reload. The unique drum configuration keeps the height of the magazine manageable and allows for prone firing and easier storage. Features an easy-to-use loading lever to retain leverage against the follower so the mag can be easily topped off, a paint-pen dot matrix for easy marking, and a rear window for capacity indication. Specifications Ratcheting loading lever allows partial or full loading without thumb strainAnti-tilt follower and constant-curve internal geometry ensure smooth, reliable feedingImpact-resistant polymer construction with reinforced internals stands up to hard useEasily disassembles for cleaning and maintenance without toolsLast round bolt hold openRear window and paint-pen panels provide fast round count and ID optionsCompatible with M4, M16, AR15, HK® 416/MR556, M27 IAR, and similar platforms *Optimized for use only with 5.56x45 NATO/.223 Remington cartridges. Use with other cartridges such as .300 AAC Blackout is not recommended Made in the USA
The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCARN MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris ntrusion and protect against potential damage to the top cartridge during storage and transit. Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel® system provides positive verification without affecting the durability or reliability of the magazine. MADE IN THE USA
ArmaLite AR-10® A-SERIES magazines covering all uses from hard military to Law Enforcement use. Fits ArmaLite AR-10® A-Type Firearms and AR-10 Clone DPMS/SR25 Style Firearms. Specifications: Compatible to ArmaLite AR-10® A-Type Firearms Compatible to DPMS / SR25 Style Receivers NOT compatible to ArmaLite AR-10® B-Type Firearms Material: Hardened Milspec Steel Finish: Parkarized Proudly designed and manufactured in the U.S.A. Compatibel firearms see under this article, accessories
The Best AK-47 MIL-SPEC magazines on the market. Made by ARSENAL®, the popular CIRCLE 10™ magazines. Arsenal JSCo/Arsenal 2000 retain all copyrights over the content and all publications on this website. All texts, logos, images, pictures, documents, database, trademarks, names and other information or advertising materials and applications are intellectual property of Arsenal JSCo, unless otherwise noted. Any other use, including copying, saving, advertising, distributing or altering of the content of this website for commercial purposes or use on other websites is strictly prohibited without a separate and specific writtenagreement or permission between you and/or your company and ARSENAL JSCo. All rights reserved ©.
M1 Carbine Blechmagazin, minimale Gebrauchsspuren, Made in USA
Seltenes Surplus M1 Carbine Blechmagazin, LRBHO Funktion, gebraucht, ausgesuchte A-Ware, verschiedene Hersteller.
M1 Carbine Blechmagazin, noch Originalverpackt in Fettpapier, verschiedene Hersteller.
Surplus M1 Carbine Blechmagazin, ausgesuchte Ware, verschiedene Hersteller.
Surplus M1 Carbine Blechmagazin, gebraucht, ausgesuchte A-Ware, verschiedene Hersteller.
M1 Carbine Blechmagazin, Neuware im geölten Kunststoffbeutel, Made in USA
This Taran Tactical Innovations 7.62x39mm AK base pad is designed to work with PMAG® 30 AK/AKM Gen M3®, PMAG® 30AK/AKM MOE® and PMAG® 30rd AK74 MOE® magazines. This TTI base pad will add 6 extra rounds to the PMAG® 30 AK/AKM Gen M3® and PMAG® 30rd AK74 MOE® magazine and 4/5 rounds (Depending on generation) to PMAG® 30AK/AKM MOE®magazines. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI 7.62x39mm PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Remove the metal insert at the bottom before installation * * Magazine NOT included * PMAG Base Pad For AK 7.62x39mm 30rd AK/AKM Gen 3 M3® and AK74 PMAG® 30rd AK74 MOE® 5.45x39mm TTI FIREPOWER PMAG MAGAZINE EXTENSION: Designed to work with stock spring. Overall weight 3.1oz. Length, 3 inch. Height, 1.5 inch The added overall length of the magazine makes it the ideal height to use as a monopod when shooting from the prone position Patented, proven push-pin design. Easily attaches and detaches from the magazine. No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension. One piece design; no small parts to keep track of. Minimal length addition to allow usage while in a prone position. Holds 36+1 rounds on the PMAG® 30 AK/AKM Gen M3® magazine and PMAG® 30rd AK74 MOE® magazine/ Holds 34+1 rounds or 35+1 on the PMAG® 30AK/AKM MOE® magazine (Depending on generation) The added weight helps the magazine drop free easier for faster reloads. CNC machined from billet aluminum. Hard anodized. Made in the USA.
This Taran Tactical Innovations .308 PMAG base pad works on any .308 20 or 25 round PMAG magazine. Compatible accessories see under this article, accessories. This TTI base pad will add 5 extra rounds to a PMAG 20 round magazine and extra 6 rounds in a 25 round PMAG magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI .308 PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. *Remove the metal insert at the bottom before installation* *Will only work on Gen 3 PMAG Magazines* PMAG Base Pad For AR10 .308 TTI Firepower PMAG Magazine Extension Specs: Designed to work with stock spring.Overall weight 4.16oz.Length, 3.5 inch.Patented, proven push-pin design.Easily attaches and detaches from the magazine.No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and plastic follower and slide on the extension.One piece design; no small parts to keep track of.Minimal length addition to allow usage while in a prone position.Holds 25+1 rounds on the PMAG20.Holds 31+1 rounds on the PMAG25.The added weight helps the magazine drop free easier for faster reloads.CNC machined from billet aluminum.Hard anodized.Made in the USA.
This Taran Tactical Innovations base pad works on Sig Sauer P320 Full Size 17/21 round 9mm and 14 round .40 S&W Full Size Magazine Bodies. +10% stronger Magazine Spring included This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI SIG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Due to magazine variances, some magazines may require slight modification to fit the 140mm gauge. * * Remove the metal insert at the bottom before installation * * This base pad is compatible with the stock P320 X5 magwell * * Remove the metal insert at the bottom before installation * * NOT compatible with carry size frames * * Magazine NOT included * TTI FIREPOWER +3/5 BASE PAD FOR SIG P320 17/21 ROUND 9MM AND 14 ROUND 40 S&W FULL SIZE MAGAZINE BODIES *Compatible with X5* This Sig P320 +5 includes a 10% stronger spring with purchase Patented proven push pin design. Adds +5 rounds to 9mm. Adds +3 rounds to 40 Cal. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. Made in the USA.
This Taran Tactical Innovations base pad works on Sig Sauer P320 Full Size 17/21 round 9mm and 14 round .40 S&W Full Size Magazine Bodies. +10% stronger Magazine Spring included This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI SIG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Due to magazine variances, some magazines may require slight modification to fit the 140mm gauge. * * Remove the metal insert at the bottom before installation * * This base pad is compatible with the stock P320 X5 magwell * * Remove the metal insert at the bottom before installation * * NOT compatible with carry size frames * * Magazine NOT included * TTI FIREPOWER +3/5 BASE PAD FOR SIG P320 17/21 ROUND 9MM AND 14 ROUND 40 S&W FULL SIZE MAGAZINE BODIES *Compatible with X5* This Sig P320 +5 includes a 10% stronger spring with purchase Patented proven push pin design. Adds +5 rounds to 9mm. Adds +3 rounds to 40 Cal. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. Made in the USA
This Taran Tactical Innovations .223 PMAG base pad works on any .223 Rem 30 or 40 round Gen 3 PMAG magazine. Compatible accessories see under this article, accessories. This TTI base pad will add 5 extra rounds to a PMAG 30 round magazine and extra 6 rounds in a 40 round PMAG magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI .223 PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Remove the metal insert at the bottom before installation * * Will only work on Gen 3 Magpul PMAG Magazines * * Magazine NOT included * PMAG BASE PAD FOR AR .223/5.56 TTI FIREPOWER PMAG MAGAZINE EXTENSION: Designed to work with stock spring.Overall weight 2.1oz.Length, 1 inch.Patented, proven push-pin design.Easily attaches and detaches from the magazine.No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.One piece design; no small parts to keep track of.Minimal length addition to allow usage while in a prone position.Holds 35+1 rounds on the PMAG30.Holds 46+1 rounds on the PMAG40.The added weight helps the magazine drop free easier for faster reloads.CNC machined from billet aluminum.Hard anodized.Made in the USA.
This Taran Tactical Innovations .223 PMAG base pad works on any .223 Rem 30 or 40 round Gen 3 PMAG magazine. Compatible accessories see under this article, accessories. This TTI base pad will add 5 extra rounds to a PMAG 30 round magazine and extra 6 rounds in a 40 round PMAG magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI .223 PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Remove the metal insert at the bottom before installation * * Will only work on Gen 3 Magpul PMAG Magazines * * Magazine NOT included * PMAG BASE PAD FOR AR .223/5.56 TTI FIREPOWER PMAG MAGAZINE EXTENSION: Designed to work with stock spring.Overall weight 2.1oz.Length, 1 inch.Patented, proven push-pin design.Easily attaches and detaches from the magazine.No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.One piece design; no small parts to keep track of.Minimal length addition to allow usage while in a prone position.Holds 35+1 rounds on the PMAG30.Holds 46+1 rounds on the PMAG40.The added weight helps the magazine drop free easier for faster reloads.CNC machined from billet aluminum.Hard anodized.Made in the USA.
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +5/6 rounds more, +10% stronger spring included. Holds 23 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 20 rounds of 40S&W in Magazine (+1 round extra in Chamber). Disclaimer: Due to variances with Glock magazines, we recommend checking your magazines in a mag gauge prior to competitions to ensure proper fitment/specifications. Doing this will also help avoid being bumped to another division. We recommend contacting your local match director preemptively to inquire about specific requirements as each match director may have different guidelines and regulations ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** ** Will work with ETS 17 round 9mm magazines ** TTI FIREPOWER BASE PAD KIT FOR GLOCK The +5/6 Base Pad includes a +10% stronger spring with purchase. Overall weight 1.6oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Will work on all full size double stacked GLOCKs. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 20+1 rounds of 40S&W. Holds 23+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. MADE IN THE USA
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +5/6 rounds more, +10% stronger spring included. Holds 23 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 20 rounds of 40S&W in Magazine (+1 round extra in Chamber). Disclaimer: Due to variances with Glock magazines, we recommend checking your magazines in a mag gauge prior to competitions to ensure proper fitment/specifications. Doing this will also help avoid being bumped to another division. We recommend contacting your local match director preemptively to inquire about specific requirements as each match director may have different guidelines and regulations ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** ** Will work with ETS 17 round 9mm magazines ** TTI FIREPOWER BASE PAD KIT FOR GLOCK The +5/6 Base Pad includes a +10% stronger spring with purchase. Overall weight 1.6oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Will work on all full size double stacked GLOCKs. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 20+1 rounds of 40S&W. Holds 23+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.MADE IN THE USA
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +5/6 rounds more, +10% stronger spring included. Holds 23 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 20 rounds of 40S&W in Magazine (+1 round extra in Chamber). Disclaimer: Due to variances with Glock magazines, we recommend checking your magazines in a mag gauge prior to competitions to ensure proper fitment/specifications. Doing this will also help avoid being bumped to another division. We recommend contacting your local match director preemptively to inquire about specific requirements as each match director may have different guidelines and regulations ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** ** Will work with ETS 17 round 9mm magazines ** TTI FIREPOWER BASE PAD KIT FOR GLOCK The +5/6 Base Pad includes a +10% stronger spring with purchase. Overall weight 1.6oz. Length, 1 1/2 inch front side, 3/4 inch on back side. Will work on all full size double stacked GLOCKs. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Ideal for full size magazines. Holds 20+1 rounds of 40S&W. Holds 23+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. MADE IN THE USA
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +3/4 rounds more. Holds 21 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 18 rounds of 40S&W in Magazine (+1 round extra in Chamber). ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK Designed to work with stock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 0.8oz. Length, 1/2 inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Works only on high-cap double stacked GLOCK OEM magazines. Holds 18+1 rounds of 40S&W. Holds 21+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. MADE IN THE USA
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +3/4 rounds more. Holds 21 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 18 rounds of 40S&W in Magazine (+1 round extra in Chamber). ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK Designed to work with stock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 0.8oz. Length, 1/2 inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Works only on high-cap double stacked GLOCK OEM magazines. Holds 18+1 rounds of 40S&W. Holds 21+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. MADE IN THE USA
Taran Tactical Innovations Firepower Base Pad Kit for Glock 17/19X/22/34/35/45 +3/4 rounds more. Holds 21 rounds of 9mm in Magazine (+1 round extra in Chamber). Holds 18 rounds of 40S&W in Magazine (+1 round extra in Chamber). ** Both extensions will compatible with Glock 45 firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines ** ** Remove the OEM polymer insert at the bottom before installation ** ** Will not function with early generation Glock mags that have u-notch cut feed lips ** ** WILL NOT WORK WITH 10 ROUND MAGAZINES ** ** Will NOT work on GLOCK 19 ** ** GLOCK Magazine NOT included ** TTI FIREPOWER BASE PAD KIT FOR GLOCK Designed to work with stock magazine spring. Will work on all full size double stacked GLOCKs. Overall weight 0.8oz. Length, 1/2 inch. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. Fits the USPSA 140mm gauge. Works only on high-cap double stacked GLOCK OEM magazines. Holds 18+1 rounds of 40S&W. Holds 21+1 rounds of 9mm. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized. Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. MADE IN THE USA
Designed to fit MP-5 pattern firearms chambered in 9x19mm. The new Generation 2 high-capacity magazine is constructed of steel with an electroplate finish, Stainless Steel follower, reinforced feed lips, and a high-tensile compression spring. SKU KCI-MZ019 Weight 0.4lbs Compatibility MP5 / SP89 / MP5SD / HK94 / SP5K Caliber 9x19mm Capacity 30 Rounds Body Material Steel Spring Material Music Wire Finish Cation Electrodeposition Coating