Magazine

10 round Magazine for Glock Pistols and Glock Clones. Also compatible with AR-15 in caliber 9X19, which accept GLOCK® magazines.  The Magpul PMAG 10 GL9 - Glock 17 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 10 GL9 - Glock 17 is compatible with all full-size 9mm Glock handguns and compact and sub-compact variants with some protrusion below the grip. MADE IN THE USA

  The FN® High Power 17-Round Magazine offers 25% more firepower than the original High Power model for superior stopping power and increased reliability in high-stress tactical environments.  Features: stainless steel body with flat black finish anti-tilt follower flat base pad MADE IN THE USA 

Upgrade your carry with the new CR920X magazine! Designed for maximum performance and reliability in a compact package. Specifications: Fits all CR920 models (note: extends below the grip on the standard CR920 but does not impede function)Ideal 15-round reload for everyday carry. CUSTOMIZE YOUR LOADOUT: A grip sleeve to provide full grip in the CR920 is available here, CR920 Magazine Sleeve (CR920X Magazine) – Shadow Systems)+1 magazine extension, CR Magazine +1 Extension (11-Round) – Shadow Systems+3 magazine extension, CR920X Magazine +3 Extension (18-Round) – Shadow Systems BUILT FOR RELIABILITY: Our engineers chose to use magazine springs far stronger than those found in competing designs. This spring power provides extra insurance with a wide range of bullet weights and in compromised firing positions or when the gun is dirty. We spared no expense on the quality of the magazine by incorporating a premium, ultra-slick nickel Teflon finish. COMPATIBILITY: ***NOTE: Fits CR920X/XP/XL & CR920 only! This magazine is NOT compatible with GLOCK or other manufacture firearms.***

  This magazine is a high quality product with Stainless Steel Feed Lip & Integrated Speed Loader, NEW GEN3 Model, Limited Run!  No more deliveries - first come, first served. 100% MADE IN THE USA Compatible Firearms: CMMG RESOLUTE Mk4 & BANSHEE Mk4, with LRBHO Function NORDIC COMPONENTS NC-15 / NC-22, with LRBHO Function Atchisson/Ciener Model 1 Sales Spikes Tactical Tactical Solutions Target Master,Conversions & other AR15.22 dedicated uppers and conversion units. Update: This magazine will now work with the "Catch.22". (Don't know what the Catch22 device is?) Click this link: http://www.arcatch22.com/ Known-compatible conversion units, rifles & dedicated uppers   Bear Creek Arsenal .22 LR Ciener/Atchisson   Model 1 Sales   Spikes Tactical   Tactical Solutions   Target Master   MANY OTHER .22 ATCHISSON/CIENER STYLE CONVERSION UNITS, UPPERS & RIFLES THAT MIGHT NOT BE LISTED NOT Compatible Firearms: CMMG BRAVO  Aero Precision .22 LWRC .22 Tippman Arms M4 .22 Magnum .22 S&W M&P 15 .22 H&K 416.22/Umarex HK-416D Pistol Colt/Umarex M-4 Carbine M-4 OPS, M-16 Rifle Beretta ARX160 .22LR M-16 SPR, Rock River Compass Lake .22 Kriss and other models that may not be listed. Magazine Details: Body: Polycarbonate, Black Feed Lip: Stainless Steel 32 round capacity  Features: Easy load-Thumb Pull down (Integrated Speed Loader) Easy to disassemble HIGHLY reliable feeding in both semi-auto and full automatic  Cleaning: Remove plate, spring and keeper. Use warm soapy water. Let magazine completely dry before you assemble. NOTE! If the integrated speed loader is pulled back and released without any ammunition in the Magazine, it will shoot up due to the spring force and damage the internal feeder components! In this case the manufacturer's warranty expires! ACHTUNG! Wird der integrierte Speedloader zurückgezogen und losgelassen ohne dass sich Munition im Magazin befindet, schnellt dieser durch die Federkraft nach oben und beschädigt den Zubringer und dessen Komponenten! In diesem Fall erlischt die Herstellergarantie.

   This magazine is a high quality product, 100 % Made in the USA. Compatible Firearms: Nordic Components NC-15 CMMG RESOLUTE Mk4 & BANSHEE Mk4 JP Enterprises .22lr Chiappa M4-22 Ciener/Atchisson  Model 1 Sales  Kriss 22LR Spikes Tactical  Tactical Solutions  Target Master  SIG P522 SWAT Kel-Tec PLR22 Sig Sauer 522  WMD Guns LLC 22LR CMMG .22 Kit - NOTE: WILL WORK WITH THE B.H.O.A. BUT WILL NOT ACTIVATE IT Bushmaster combo kit NOT Compatible Firearms: S&W M&P 15 .22 H&K 416.22/Umarex HK-416D Pistol Colt/Umarex M-4 Carbine M-4 OPS, M-16 Rifle Beretta ARX160 .22LR M-16 SPR, Rock River Kriss and other models that may not be listed Magazine Details: Body Color: Smoke Polycarbonate Glass Filled Nylon 25 round capacity  Features: Sonic Welded magazine body, no screws, no brass & lightweight! HIGHLY reliable feeding in both semi-auto and full automatic  Cleaning: Remove plate, spring and keeper. Use warm soapy water. Let magazine completely dry before you assemble. MADE IN THE USA

10 round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. A flared floor plate aids in extraction and handling. The floor plate provides drop protection. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life steel spring and four-way anti-tilt follower ensure reliable feeding. Oversized bolt catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Toolless disassembly with double floor plate safety release tabs. Specifications: 25% Stronger vs previous Long Glass Fiber Polymer60% Higher Impact Strength vs previous Long Glass Fiber Polymer2nd Generation Long Glass Fiber PolymerMFT stipple textureLow profile front ribs front textureFlared floor plateDrain holeLong-life steel springImproved two-point follower stop designOversized mag catchWeight:4.8ozHeight: 8.79"Width: 1.125"Length: 2.25"MADE IN THE USA

10 round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. A flared floor plate aids in extraction and handling. The floor plate provides drop protection. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life steel spring and four-way anti-tilt follower ensure reliable feeding. Oversized bolt catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Toolless disassembly with double floor plate safety release tabs. Specifications: 25% Stronger vs previous Long Glass Fiber Polymer60% Higher Impact Strength vs previous Long Glass Fiber Polymer2nd Generation Long Glass Fiber PolymerMFT stipple textureLow profile front ribs front textureFlared floor plateDrain holeLong-life steel springImproved two-point follower stop designOversized mag catchWeight:4.8ozHeight: 8.79"Width: 1.125"Length: 2.25"MADE IN THE USA

Designed for the AR10A/SR25/M110 pattern rifles. Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition. Utilizing new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed demanding military performance specs. Specifications: 25% Stronger vs previous Long Glass Fiber Polymer60% Higher Impact Strength vs previous Long Glass Fiber Polymer2nd Generation Long Glass Fiber PolymerRibbed front and rear gripping surface.Tool-less disassembly with double floor plate safety release tabs.Long-life stainless steel spring Four-way anti-tilt self-lubricating follower.Flared floor plateOversized bolt catchMADE IN THE USA

  The 5.56/.223/.300BLK DURAMAG SS™ is designed for serious shooters who require the most out of their magazines so when performance and durability are paramount, make the switch to DURAMAG SS™ and never look back. These are the ultimate magazine of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. Constructed from premium 410 Stainless Steel for maximum durability. This material, coupled with advanced interior and exterior geometries, ensure ultimate reliability and feeding. DURAMAG™ will not flex or swell like polymer and are safe for extended storage while loaded without any add ons. These magazines utilize our T-360™ coating to ensure not only incredibly smooth performance and ease of loading, but also product longevity through the harshest conditions. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  The GEN-12 10-round magazine fits in all GEN-12 shotguns and is proprietary to the GEN-12. This is the feeding soul of your GEN-12. Load it with 2 3/4" 12-gauge shells and most 3" shells in the market place --remember if it doesn't go in easy then you should stop! NOTE:  The GEN-12 magazines will NOT work with any other AR 12 gauge and is proprietary to Genesis Arms, LLC.  The GEN-12 doesn't care if it is low brass or high brass. So get your favorite wal-mart ammo for plinking and your home defense ammo for when it counts.  NOTICE: When loading, you can not push the shells straigth down like you can on a AR rifle magazine. It loads more like a pistol magazine, as you have to load under the rear tabs of the magazine. SPECS 10 round magazine High-Strength Lightweight Polymer Construction 100% MADE IN THE USA Informations:   Will NOT work with any other AR 12 gauge Clones  Compatible accessories see under this article, accessories

  The GEN-12 5-round magazine fits in all GEN-12 shotguns and is proprietary to the GEN-12. This is the feeding soul of your GEN-12. Load it with 2 3/4" 12-gauge shells and most 3" shells in the market place --remember if it doesn't go in easy then you should stop! NOTE:  The GEN-12 magazines will NOT work with any other AR 12 gauge and is proprietary to Genesis Arms, LLC.  The GEN-12 doesn't care if it is low brass or high brass. So get your favorite wal-mart ammo for plinking and your home defense ammo for when it counts.  NOTICE: When loading, you can not push the shells straigth down like you can on a AR rifle magazine. It loads more like a pistol magazine, as you have to load under the rear tabs of the magazine. SPECS 5 round magazine High-Strength Lightweight Polymer Construction 100% MADE IN THE USA Informations:   Will NOT work with any other AR 12 gauge Clones  Compatible accessories see under this article, accessories

  CMMG’s new 22LR 25rd magazine combines the proven functionality of our original 22ARC magazines with all new exterior styling to match the looks of our lineup of firearms and other conversion magazines.   It features a 25-round capacity and is compatible with .22LR conversion kits and CMMG Mk4/mil-spec AR15 lower receivers.   MADE IN THE USA

  The 545™ .45 APC 18 round magazine features a Nickel coated steel body with a extended base pad.   Features: - Nickel-coated steel body - 18RD magazine - Not Compatible with FNX-45 Notes: Will not work with FNX-45 series pistols! MADE IN THE USA 

  Fits Glock® Model 30 .45 ACP as well AR-15 types in .45 ACP SPECS: 10-round magazine with Floorplate extension! Magazine body constructed of a proprietary DuPont™ Zytel® based polymer Magazine body has full length steel internal insert stamped and welded like the factory magazine Injection molded magazine follower Spring is made from heat treated chrome silicon wire MADE IN THE USA  

  The 5.56/.223/.300BLK DURAMAG SS™ is designed for serious shooters who require the most out of their magazines so when performance and durability are paramount, make the switch to DURAMAG SS™ and never look back. These are the ultimate magazine of choice for shooters that are running 300 Blackout especially round with long load length or even the heaviest of sub-sonic loads. Constructed from premium 410 Stainless Steel for maximum durability. This material, coupled with advanced interior and exterior geometries, ensure ultimate reliability and feeding. DURAMAG™ will not flex or swell like polymer and are safe for extended storage while loaded without any add ons. These magazines utilize our T-360™ coating to ensure not only incredibly smooth performance and ease of loading, but also product longevity through the harshest conditions. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 5 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Orange Anti-tilt AGF follower Compatible with AR-15/M4/M16 models in caliber 5.56 NATO / .223 REM / .300 AAC BLACKOUT MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Hard-hitting calibers demand serious magazines. DURAMAG SS® SR25 pattern mags are made from a single piece of laser-welded 410 Stainless Steel and protected with T-360®- applied coating. This is a magazine that can truly withstand the test of time, and hard use. C Products Defense took great care to design this magazine to be the best option for precision shooters but also for heavy full-auto use. Precision shooters will enjoy a a beautiful COAL of 2.87" for their long-range shooting while knowing that their magazine will also feed as fast as needed, every time. The DURAMAG SS® magazine is the choice for Military units across the world. Specifications: Capacity: 10 round Material: 410 Stainless Steel body Everflex™ Spring T-360™ total coating technology - Black Black Controlled-tilt AGF follower  Compatible with AR-10 models in caliber 7.62 NATO / .308 WIN / 6.5 CREEDMOOR / 6.8x51 Compatible with ARMALITE AR-10® A-SERIES, KNIGHTS ARMAMENT, ROBINSON ARMAMENT, MOSSBERG MVP®, RUGER RPR etc. MADE IN THE USA  The DURAMAG® story begins with the creation of C Products Defense, Inc. (CPD®), established in Bradenton, Florida in 2011. The company started with the creation of new magazine designs and fresh production techniques. CPD’s work continued with the purchase of all new equipment, tooling, and molds. Through their dedication to quality and attention to detail, CPD earned ISO-9001-2008 certification in 2013, only two years after start-up. Those standards have been maintained ever since and CPD is now certified ISO-9001-2015.

  Maximum Magazine Capacity for all Glock 48 / 43X models 15-round magazine Fits Fits Glock® 48 / 43X 9mm Magazine body constructed of heat treated steel with black oxide finish Steel magazine body with polymer catch insert, allows use of factory Glock® mag catch with no modifications needed Injection molded magazine follower Spring is made from heat treated chrome silicon wire Width:7.00 (in) Height:4.50 (in) Depth:1.00 (in) MADE IN THE USA

  Fits AR-15® / M16 .223 and 5.56x45mm rifles and carbines SPECS:   10-round magazine Magazine body constructed of a proprietary DuPont™ Zytel® based polymer Injection molded magazine follower Magazine spring formed from heat treated chrome silicon wire MADE IN USA

  When installed on the base of a 5.56x45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines TECHNICAL SPECIFICATIONS  Platform: AR15, M4, M16 Compatibility: Most aluminum, steel, and polymer 5.56 x 45 magazines  MADE IN THE USA

  Compatible with all SA (SHORT ACTION) Bolt Action Rifles with AICS (Accuracy International Chassis Systems) Magazine Interface in Caliber .308 WIN, 6.5 Creedmoor, 7mm-08 Remington, .260 Remington and .243 WIN NOT compatible for other Calibers or Semi-Automatic Rifles  Featuring GEN M3® technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 7.62 AICS sets a new standard for bolt action magazines. MADE IN USA

  The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines. It incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Loop is made of pliable Santoprene rubber overmolded onto a stainless steel plate. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. SPECS NSN: MAG020-BLK 1005-01-560-2100 NSN: MAG020-FDE 1005-01-616-4912 NSN: MAG020-ODG 1005-01-616-4900 Technical Specifications More Information Platform AR15, M4, M16 Compatibility USGI 30-round aluminum magazines MADE IN THE USA

  The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines. It incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Loop is made of pliable Santoprene rubber overmolded onto a stainless steel plate. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. SPECS NSN: MAG020-BLK 1005-01-560-2100 NSN: MAG020-FDE 1005-01-616-4912 NSN: MAG020-ODG 1005-01-616-4900 Technical Specifications More Information Platform AR15, M4, M16 Compatibility USGI 30-round aluminum magazines MADE IN THE USA

  When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used with special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines TECHNICAL SPECIFICATIONS  Platform: AR10, M110, SR25 Compatibility: Most aluminum, steel, and polymer 7.62 /.308 magazines   MADE IN THE USA

  The next-generation PMAG 10 GEN M3 is a 10-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with an expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability. The PMAG 10 provides next-generation performance for those needing lower profile magazines.  While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.The PMAG 10 GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower for reliable feeding, and an easy to disassemble flared floorplate to aid extraction and handling of the magazine while providing improved drop protection. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. MADE IN THE USA