WeaponLight Accessories

  Proceed With Clamping Force. The M-AD-SF is an in-line mount designed for mounting a Surefire M600/M300 series Scout Light to a Picatinny rail. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in-spec and out-of-spec rail systems. The M-AD-SF takes up 1.4 inches of Picatinny rail space. Specs: Precision-mount for M300/M600 Scout Light® models Patented QD Auto Lock™ Lever accommodates a wide variety of rail systems Superior clamping surface ensures maximum rail engagementMADE IN THE USA

  Proceed With Clamping Force. The M-AD-SF is an in-line mount designed for mounting a Surefire M600/M300 series Scout Light to a Picatinny rail. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in-spec and out-of-spec rail systems. The M-AD-SF takes up 1.4 inches of Picatinny rail space. Specs: Precision-mount for M300/M600 Scout Light® models Patented QD Auto Lock™ Lever accommodates a wide variety of rail systems Superior clamping surface ensures maximum rail engagementMADE IN THE USA

  ERA-TAC Picatinny Interface, "cranked on the side" for universal interface This adapter allows you to attach tactical accessories and red dot sights to the ERATAC rifle scope mount using the UNIVERSAL Interface The 20° lateral offset ensures a clear view past the turret of the rifle scope SPECS Compatible to ERATAC rifle scope mount using the UNIVERSAL Interface ONLY! 1913 Picatinny Colour: Black Material: Aluminum Includes 4 Torx screws MADE IN GERMANY

  Compatible to ERATAC rifle scope mounts and ERATAC parts which using the UNIVERSAL Interface! SPECS Height: 10mm Compatible to all ERATAC rifle scope mounts Compatible to all ERATAC UNIVERSAL Interfaces NOT COMPATIBLE to other Manufactures! Colour: Black Material: Aluminum Include Torx screws Compatible accessories see under this article, accessories. MADE IN GERMANY

   The ERGO Tactical Light Switch Mount Kit firmly attaches first generation Surefire and Insight Technologies pressure switches to Picatinny rails. Firmly attaches first generation Surefire and Insight Technologies pressure switches to Picatinny rails. Each kit includes unique switch holders for each pressure switch type. Made of semi-rigid rubber for positive grabbing of the rail Switch and light NOT included Compatible to Surefire and Insight pressure switches from first generation  NOT compatible to UE07 switches, only possible with a small modification of the Ergo adapter plate MADE IN THE USA

 The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o'clock positions on M-LOK compatible hand guards and forends. Machined from Mil-Spec anodized aluminum, this mounting solution features beveled ends and corners to reduce snagging and sharp edges. The Offset Light/Optic Mount allows for the direct attachment of the Surefire® M300/600 series of Scout Lights® or other MIL-STD-1913 Picatinny light and optic mounts. The optional Magpul Light Mount V-BLock and Rings can also be used to attach hand held lights with a diameter from 0.75 to 1.03 in. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. FOR USE WITH M-LOK COMPATIBLE HANDGUARDS AND FORENDS Four slots allow for attachment of Picatinny light and optic mounts   POSITIONS LIGHT OR OPTICS AT EITHER THE 11 OR 1 O'CLOCK POSITIONS   M-LOK Description and FAQs M-LOK Installation Tips TECHNICAL SPECIFICATPOSITIONS  Attachment M-LOK Slots Other Specs COMPATIBILITY For use with M-LOK compatible hand guards and forends. Surefire® M300/600 series of Scout Lights® may be directly attached. MADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails LONG:-LENGTH: 43.65mm-WIDTH: 26.21mm-HEIGHT: 90.20mm-WEIGHT: 1.4 oz-WEIGHT W/ PKG: 2.4 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails LONG:-LENGTH: 43.65mm-WIDTH: 26.21mm-HEIGHT: 90.20mm-WEIGHT: 1.4 oz-WEIGHT W/ PKG: 2.4 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails SHORT:-LENGTH: 43.63mm-WIDTH: 28.84mm-HEIGHT: 58.40mm-WEIGHT: 0.8 oz-WEIGHT W/ PKG: 1.8 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails SHORT:-LENGTH: 43.63mm-WIDTH: 28.84mm-HEIGHT: 58.40mm-WEIGHT: 0.8 oz-WEIGHT W/ PKG: 1.8 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails LONG:-LENGTH: 50.80mm (2.00")-WIDTH: 34.80mm (1.37")-HEIGHT: 91.44mm (3.60"")-WEIGHT: 2.0 oz-WEIGHT W/ PKG: 3.0 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails LONG:-LENGTH: 50.80mm (2.00")-WIDTH: 34.80mm (1.37")-HEIGHT: 91.44mm (3.60"")-WEIGHT: 2.0 oz-WEIGHT W/ PKG: 3.0 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails SHORT:-LENGTH: 44.45mm (1.75")-WIDTH: 34.80mm (1.37")-HEIGHT: 63.50mm (2.50")-WEIGHT: 1.7 oz-WEIGHT W/ PKG: 2.6 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: 1913 Picatinny Package Contents:-x1 Angled Vertical Grip -x2 M5x30mm screw-x2 Hex nut-x1 Hex tool-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in Cable Management System® w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop-Low-profile design to minimize snags (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For 1913 Picatinny rails SHORT:-LENGTH: 44.45mm (1.75")-WIDTH: 34.80mm (1.37")-HEIGHT: 63.50mm (2.50")-WEIGHT: 1.7 oz-WEIGHT W/ PKG: 2.6 ozMADE IN THE USA

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control. COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme materialMADE IN THE USA

   The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.COMPATIBILITY: M-LOK and KeyMod Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws Package Contents:-x1 Link Cobra Fore Grip with Cable Management-x2 Screw-x2 Nut-x1 Torx key [T20]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card Product Features:-Patented SI LINK mounting system (M-LOK and KeyMod compatible)-Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Multiple ergonomic grip options for better weapon manipulation control-Designed to offer a barricade stop functionality with ridged face-Lightweight-High-strength impact resistant custom blended SI Polymer Extreme materialMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x2 M-LOK Cable Management Covers (Long) -x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer LONG:-LENGTH: 79.80mm (3.14")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.20 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x2 M-LOK Cable Management Covers (Long) -x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer LONG:-LENGTH: 79.80mm (3.14")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.20 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x4 M-LOK Cable Management Covers (Short)-x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer SHORT:-LENGTH: 39.90mm (1.57")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.40 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x4 M-LOK Cable Management Covers (Short)-x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer SHORT:-LENGTH: 39.90mm (1.57")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.40 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal. COMPATIBILITY: 1913 Picatinny Package Contents:-x6 Strike Multidirectional Picatinny Rail Cover with Cable Management Product Features:-Add better weapon manipulation control-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, U-shape, Z-shape or across-Protect Picatinny rails from damage and hand/thumb from sharp edge-Low-profile design to minimize snags (9.43mm (0.37”) height)-Accommodate wires up to 3.5mm (0.14")-Quick installation and removal-Made from durable and lightweight SI PolyFlex material -LENGTH: 20.07mm (0.79")-WIDTH: 29.46mm (1.16")-HEIGHT: 9.43mm (0.37")-WEIGHT: 0.10 oz (each cover)-WEIGHT W/ PKG: 0.70 ozMADE IN THE USA

  Go Remote. Conserve Space. The CSM-07 lets you remotely activate your SureFire WeaponLight while also conserving space on your weapon’s rail. It provides reliable and instant momentary-on or constant-on from a single switch; lightly press for momentary-on activation, or click through for constant on. The CSM-07’s compact, durable polymer housing ensures secure attachment to any M-LOK rail. Because it’s engineered to our uncompromising standards, you can trust the CSM-07 to reliably activate your light when you need it.   Features Provides remote momentary-on and constant-on WeaponLight activation Compact design conserves space on your weapon rail Switch platform mounts securely to your M-LOK rail The CSM-07 includes a 7-inch cable that works with most rifle/carbine applications Weatherproof switch and plug Reliable remote activation for any SureFire WeaponLight with a switch socket Compact design provides momentary-on and constant-on through a single switch Clamp allows easy attachment to M-LOK rail MADE IN THE USA Compability SureFire WeaponLights with plug sockets, including Millennium Universal, Classic Universal Scout Light fitted with socketed tailcap, X300, X400 with XT tailcap assembly Compatibel accessories see under this article, accessories  

  Go Remote. Conserve Space. The CSM-09 lets you remotely activate your SureFire WeaponLight while also conserving space on your weapon’s rail. It provides reliable and instant momentary-on or constant-on from a single switch; lightly press for momentary-on activation, or click through for constant on. The CSM-09’s compact, durable polymer housing ensures secure attachment to any M-LOK rail. Because it’s engineered to our uncompromising standards, you can trust the CSM-09 to reliably activate your light when you need it.   Features Provides remote momentary-on and constant-on WeaponLight activation Compact design conserves space on your weapon rail Switch platform mounts securely to your M-LOK rail The CSM-09 includes a 9-inch cable that works with most rifle/carbine applications Weatherproof switch and plug Reliable remote activation for any SureFire WeaponLight with a switch socket Compact design provides momentary-on and constant-on through a single switch Clamp allows easy attachment to M-LOK rail MADE IN THE USA Compability SureFire WeaponLights with plug sockets, including Millennium Universal, Classic Universal Scout Light fitted with socketed tailcap, X300, X400 with XT tailcap assembly Compatibel accessories see under this article, accessories  

  Go Remote. Conserve Space.  The CSP-07 lets you remotely activate your SureFire WeaponLight while also conserving space on your weapon’s rail. It provides reliable and instant momentary-on or constant-on from a single switch; lightly press for momentary-on activation, or click through for constant on. The CSP-07’s compact, durable polymer housing ensures secure attachment to any Picatinny rail. Because it’s engineered to our uncompromising standards, you can trust the CSP-07 to reliably activate your Scout Light when you need it. Features Provides remote momentary-on and constant-on WeaponLight activation Compact design conserves space on your weapon rail Switch platform clips securely to your Picatinny rail without tools The CSP-07 includes a 7-inch cable that works with most rifle/carbine applications Weatherproof switch and plug Reliable remote activation for any SureFire WeaponLight with a switch socket Compact design provides momentary-on and constant-on through a single switch Snap-on clamp allows easy attachment to Picatinny rail MADE IN THE USA Compability SureFire WeaponLights with plug sockets, including Millennium Universal, Classic Universal Scout Light fitted with socketed tailcap, X300, X400 with XT tailcap assembly Compatibel accessories see under this article, accessories