WeaponLight Accessories

  Proceed With Clamping Force. The M-AD-SF is an in-line mount designed for mounting a Surefire M600/M300 series Scout Light to a Picatinny rail. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in-spec and out-of-spec rail systems. The M-AD-SF takes up 1.4 inches of Picatinny rail space. Specs: Precision-mount for M300/M600 Scout Light® models Patented QD Auto Lock™ Lever accommodates a wide variety of rail systems Superior clamping surface ensures maximum rail engagementMADE IN THE USA

  Proceed With Clamping Force. The M-AD-SF is an in-line mount designed for mounting a Surefire M600/M300 series Scout Light to a Picatinny rail. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in-spec and out-of-spec rail systems. The M-AD-SF takes up 1.4 inches of Picatinny rail space. Specs: Precision-mount for M300/M600 Scout Light® models Patented QD Auto Lock™ Lever accommodates a wide variety of rail systems Superior clamping surface ensures maximum rail engagementMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails LONG:-LENGTH: 43.65mm-WIDTH: 26.21mm-HEIGHT: 90.20mm-WEIGHT: 1.4 oz-WEIGHT W/ PKG: 2.4 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x2 M-LOK Cable Management Covers (Long) -x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer LONG:-LENGTH: 79.80mm (3.14")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.20 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x2 M-LOK Cable Management Covers (Long) -x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer LONG:-LENGTH: 79.80mm (3.14")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.20 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x4 M-LOK Cable Management Covers (Short)-x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer SHORT:-LENGTH: 39.90mm (1.57")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.40 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time. COMPATIBILITY: M-LOK ONLY! Package Contents:-x4 M-LOK Cable Management Covers (Short)-x4 Screw-x4 Nut-x1 Torx tool [T20]-x1 Loctite® Threadlocker Blue 243® Product Features:-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, across, 90-degrees or U-shape-Positive tactile feeling-Minimizes heat transfer-Increased comfort-Protection against sharp rail slot edges-Made from durable and lightweight polymer SHORT:-LENGTH: 39.90mm (1.57")-WIDTH: 22.00mm (0.87")-HEIGHT: 6.20mm (0.24")-WEIGHT: 0.40 oz (each cover)-WEIGHT W/ PKG: 1.40 ozMADE IN THE USA

  The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal. COMPATIBILITY: 1913 Picatinny Package Contents:-x6 Strike Multidirectional Picatinny Rail Cover with Cable Management Product Features:-Add better weapon manipulation control-Built-in Cable Management System® w/ excess wire storage (patent pending)-Cables can be routed: alongside, U-shape, Z-shape or across-Protect Picatinny rails from damage and hand/thumb from sharp edge-Low-profile design to minimize snags (9.43mm (0.37”) height)-Accommodate wires up to 3.5mm (0.14")-Quick installation and removal-Made from durable and lightweight SI PolyFlex material -LENGTH: 20.07mm (0.79")-WIDTH: 29.46mm (1.16")-HEIGHT: 9.43mm (0.37")-WEIGHT: 0.10 oz (each cover)-WEIGHT W/ PKG: 0.70 ozMADE IN THE USA

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails SHORT:-LENGTH: 43.63mm-WIDTH: 28.84mm-HEIGHT: 58.40mm-WEIGHT: 0.8 oz-WEIGHT W/ PKG: 1.8 ozMADE IN THE USA

  Spare Parts & Mounting Kit For SureFire X300 A-Series Handgun WeaponLights Keep your X300 A-Series handgun WeaponLight properly maintained with genuine SureFire hardware Keep It Real. SureFire offers Z89 and Z89-TN parts kits to provide X300 A-series handgun WeaponLight users with genuine OE replacement parts. There's no need to source poor-quality or misfit parts for your X300A model. SureFire has you covered! Every Z89 and Z89-TN parts kit includes the following user-replaceable parts: 6 ea. SHC Screw, 2-56 x 5/16 1 ea. SHC Screw, 2-56 x 5/8 1 ea. Slide Latch, Universal 1 ea. Slide Latch Lock 1 ea. Rail Interface, Right Side 1 ea. Rail Interface, Left Side 1 ea. Slide Latch, Picatinny 1 ea. Lock Actuator 1 ea. Lever Latch, X200/X300 Picatinny 1 ea. Lever Latch, Univeral 1 ea. Crest to Crest Spring 1 ea. Loctite Adhesive 242, .5m 1 ea. Hex Wrench, 5/64 The Z89 and Z89-TN are spare mount parts kits for the following WeaponLight models: X300T-A; X300U-A; X300V; X300T-A-TN; X300U-A-TN.MADE IN THE USA

  Spare Parts & Mounting Kit For SureFire X300 A-Series Handgun WeaponLights Keep your X300 A-Series handgun WeaponLight properly maintained with genuine SureFire hardware Keep It Real. SureFire offers Z89 and Z89-TN parts kits to provide X300 A-series handgun WeaponLight users with genuine OE replacement parts. There's no need to source poor-quality or misfit parts for your X300A model. SureFire has you covered! Every Z89 and Z89-TN parts kit includes the following user-replaceable parts: 6 ea. SHC Screw, 2-56 x 5/16 1 ea. SHC Screw, 2-56 x 5/8 1 ea. Slide Latch, Universal 1 ea. Slide Latch Lock 1 ea. Rail Interface, Right Side 1 ea. Rail Interface, Left Side 1 ea. Slide Latch, Picatinny 1 ea. Lock Actuator 1 ea. Lever Latch, X200/X300 Picatinny 1 ea. Lever Latch, Univeral 1 ea. Crest to Crest Spring 1 ea. Loctite Adhesive 242, .5m 1 ea. Hex Wrench, 5/64 The Z89 and Z89-TN are spare mount parts kits for the following WeaponLight models: X300T-A; X300U-A; X300V; X300T-A-TN; X300U-A-TN.MADE IN THE USA

  Spare Parts & Mounting Kit For SureFire X300 B-Series And X400 Series Handgun WeaponLights Keep your X300 B-Series or X400 handgun WeaponLight properly maintained with genuine SureFire hardware  MADE IN THE USA

 The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o'clock positions on M-LOK compatible hand guards and forends. Machined from Mil-Spec anodized aluminum, this mounting solution features beveled ends and corners to reduce snagging and sharp edges. The Offset Light/Optic Mount allows for the direct attachment of the Surefire® M300/600 series of Scout Lights® or other MIL-STD-1913 Picatinny light and optic mounts. The optional Magpul Light Mount V-BLock and Rings can also be used to attach hand held lights with a diameter from 0.75 to 1.03 in. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. FOR USE WITH M-LOK COMPATIBLE HANDGUARDS AND FORENDS Four slots allow for attachment of Picatinny light and optic mounts   POSITIONS LIGHT OR OPTICS AT EITHER THE 11 OR 1 O'CLOCK POSITIONS   M-LOK Description and FAQs M-LOK Installation Tips TECHNICAL SPECIFICATPOSITIONS  Attachment M-LOK Slots Other Specs COMPATIBILITY For use with M-LOK compatible hand guards and forends. Surefire® M300/600 series of Scout Lights® may be directly attached. MADE IN THE USA

  ERA-TAC Picatinny Interface, "cranked on the side" for universal interface This adapter allows you to attach tactical accessories and red dot sights to the ERATAC rifle scope mount using the UNIVERSAL Interface The 20° lateral offset ensures a clear view past the turret of the rifle scope SPECS Compatible to ERATAC rifle scope mount using the UNIVERSAL Interface ONLY! 1913 Picatinny Colour: Black Material: Aluminum Includes 4 Torx screws MADE IN GERMANY

  Compatible to ERATAC rifle scope mounts and ERATAC parts which using the UNIVERSAL Interface! SPECS Height: 10mm Compatible to all ERATAC rifle scope mounts Compatible to all ERATAC UNIVERSAL Interfaces NOT COMPATIBLE to other Manufactures! Colour: Black Material: Aluminum Include Torx screws Compatible accessories see under this article, accessories. MADE IN GERMANY

  The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. COMPATIBILITY: M-LOK ONLY! National Tactical Officers Association ApprovedNTOA Overall Rating: 4.07 Package Contents:-x1 Angled Vertical Grip (long or short)-x2 #8-32x0.3" screw-x2 M-LOK nut-x1 Torx key-x1 Loctite® Threadlocker Blue 242®-x1 Warning card Product Features:-86° grip angle-Built-in cable management w/ excess wire storage (patent pending)-Forward angle provides more of a natural wrist angle and increased rigidity of forearm-Side cuts at top of grip for pressure switch cable routing-Built-in stability when L-shaped bottom is placed on a table edge/corner or as a barricade stop (Long)-Low-profile design to minimize snags (Short)-Can be mounted in either direction for preferred setup (Short)-Textured palm and finger areas with flat sides for better weapon manipulation control-Made from durable and lightweight polymer-For M-LOK rails SHORT:-LENGTH: 43.63mm-WIDTH: 28.84mm-HEIGHT: 58.40mm-WEIGHT: 0.8 oz-WEIGHT W/ PKG: 1.8 ozMADE IN THE USA

  SUREFIRE UE-SR07 Remote Dual Switch, zur Befestigung an allen Picatinny und MIL-STD-1913 Rails, kompatibel zu allen SCOUT LIGHT® Modellen. Features: Plug-in SR07 7” remote switch with integrated momentary-on pressure pad and click on/off switch in a MIL-STD-1913 compatible, over molded switch housing Pressure pad snaps onto Picatinny rails System disable feature Fits SureFire Scout Light WeaponLights   Complete Switching Authority. The UE-SR07 provides remote momentary– and constant– on activation with the UE tailcap.MADE IN THE USA

  SUREFIRE DS-SR07 Waterproof Switch, compatible with all SCOUT LIGHT® models and ATPIAL / DBAL Laser.   The DS-SR07-D-IT is a waterproof switch assembly for simultaneous use of SureFire Scout Light® WeaponLights (excludes Micro Scout Light Pro) and an ATPIAL or DBAL laser. It includes a system-disable feature, a click-on/off pushbutton switch, and a plug-in SR07-D-IT dual-control switch assembly with a 7-inch momentary-on and a dome-style on/off remote tape switch. The integrated pushbutton and remote switch assemblies operate independently, providing switch redundancy. Features: Designed to integrate SureFire Scout Lights (excludes Micro Scout Light Pro) with an ATPIAL or DBAL laser DS00 click-on/off push-button switch SR07-D-IT provides remote momentary-on activation, either separately or simultaneously Accommodates two weapon-mounted illumination tools — a SureFire WeaponLight (excludes Micro Scout Light Pro) and an ATPIAL or DBAL laser Separate plug-in cables connect each device to the switch platform, where two pressure-pad switches are integrated with a single snap-on clamp for easy attachment to your firearm's Picatinny rail forend System-disable featureMADE IN THE USA

  SUREFIRE DS-SR07 Waterproof Switch, compatible with all SCOUT LIGHT® models and ATPIAL / DBAL Laser.   The DS-SR07-D-IT is a waterproof switch assembly for simultaneous use of SureFire Scout Light® WeaponLights (excludes Micro Scout Light Pro) and an ATPIAL or DBAL laser. It includes a system-disable feature, a click-on/off pushbutton switch, and a plug-in SR07-D-IT dual-control switch assembly with a 7-inch momentary-on and a dome-style on/off remote tape switch. The integrated pushbutton and remote switch assemblies operate independently, providing switch redundancy. Features: Designed to integrate SureFire Scout Lights (excludes Micro Scout Light Pro) with an ATPIAL or DBAL laser DS00 click-on/off push-button switch SR07-D-IT provides remote momentary-on activation, either separately or simultaneously Accommodates two weapon-mounted illumination tools — a SureFire WeaponLight (excludes Micro Scout Light Pro) and an ATPIAL or DBAL laser Separate plug-in cables connect each device to the switch platform, where two pressure-pad switches are integrated with a single snap-on clamp for easy attachment to your firearm's Picatinny rail forend System-disable featureMADE IN THE USA

  SUREFIRE DS-SR07 Waterproof Switch, compatible with all SCOUT LIGHT® models. Features: Push-button switch with plug-assembly and 7-inch remote tape switch Tape switch provides reliable momentary-on and click-on/-off light activation Integrated and remote switch assemblies operate independently Click on/off push-button switch Plug-in 7-inch remote switch with integrated momentary-on pressure pad and click-on/off switch in a MIL-STD-1913 compatible, over molded switch housing System disable feature Two-piece, O-ring sealed housing swivels to facilitate precise positioning of the integrated click-on/off switch in the DS switch housing   Switch Tactics. The DS-SR07 is a waterproof switch assembly for most SureFire's Scout Light® WeaponLights (excludes Micro Scout Light Pro). It includes a system disable feature, click-on/off pushbutton switch, and a plug-in SR07 switch assembly with a 7-inch momentary-on and click-on/off remote tape switch. The integrated pushbutton and remote switch assemblies operate independently, providing switch redundancy.MADE IN THE USA

  SUREFIRE DS-SR07 Waterproof Switch, compatible with all SCOUT LIGHT® models. Features: Push-button switch with plug-assembly and 7-inch remote tape switch Tape switch provides reliable momentary-on and click-on/-off light activation Integrated and remote switch assemblies operate independently Click on/off push-button switch Plug-in 7-inch remote switch with integrated momentary-on pressure pad and click-on/off switch in a MIL-STD-1913 compatible, over molded switch housing System disable feature Two-piece, O-ring sealed housing swivels to facilitate precise positioning of the integrated click-on/off switch in the DS switch housing   Switch Tactics. The DS-SR07 is a waterproof switch assembly for most SureFire's Scout Light® WeaponLights (excludes Micro Scout Light Pro). It includes a system disable feature, click-on/off pushbutton switch, and a plug-in SR07 switch assembly with a 7-inch momentary-on and click-on/off remote tape switch. The integrated pushbutton and remote switch assemblies operate independently, providing switch redundancy.MADE IN THE USA

  Spare Parts & Mounting Kit For SureFire X300 B-Series And X400 Series Handgun WeaponLights Keep your X300 B-Series or X400 handgun WeaponLight properly maintained with genuine SureFire hardware  MADE IN THE USA

  Go Remote. Conserve Space. The CSM-07 lets you remotely activate your SureFire WeaponLight while also conserving space on your weapon’s rail. It provides reliable and instant momentary-on or constant-on from a single switch; lightly press for momentary-on activation, or click through for constant on. The CSM-07’s compact, durable polymer housing ensures secure attachment to any M-LOK rail. Because it’s engineered to our uncompromising standards, you can trust the CSM-07 to reliably activate your light when you need it.   Features Provides remote momentary-on and constant-on WeaponLight activation Compact design conserves space on your weapon rail Switch platform mounts securely to your M-LOK rail The CSM-07 includes a 7-inch cable that works with most rifle/carbine applications Weatherproof switch and plug Reliable remote activation for any SureFire WeaponLight with a switch socket Compact design provides momentary-on and constant-on through a single switch Clamp allows easy attachment to M-LOK rail MADE IN THE USA Compability SureFire WeaponLights with plug sockets, including Millennium Universal, Classic Universal Scout Light fitted with socketed tailcap, X300, X400 with XT tailcap assembly Compatibel accessories see under this article, accessories  

  Go Remote. Conserve Space. The CSM-09 lets you remotely activate your SureFire WeaponLight while also conserving space on your weapon’s rail. It provides reliable and instant momentary-on or constant-on from a single switch; lightly press for momentary-on activation, or click through for constant on. The CSM-09’s compact, durable polymer housing ensures secure attachment to any M-LOK rail. Because it’s engineered to our uncompromising standards, you can trust the CSM-09 to reliably activate your light when you need it.   Features Provides remote momentary-on and constant-on WeaponLight activation Compact design conserves space on your weapon rail Switch platform mounts securely to your M-LOK rail The CSM-09 includes a 9-inch cable that works with most rifle/carbine applications Weatherproof switch and plug Reliable remote activation for any SureFire WeaponLight with a switch socket Compact design provides momentary-on and constant-on through a single switch Clamp allows easy attachment to M-LOK rail MADE IN THE USA Compability SureFire WeaponLights with plug sockets, including Millennium Universal, Classic Universal Scout Light fitted with socketed tailcap, X300, X400 with XT tailcap assembly Compatibel accessories see under this article, accessories