Picatinnyrails / Vorderschaft Komponenten
Kompatibel zu allen M-LOK® Vorderschäften, ideal für den weiteren Aufbau oder zur Befestigung von Vordergriffen, Laser, Licht und Bipods sowie andere Bauteile welche eine M-LOK® Aufnahme besitzen. M-LOK® steht für Modular Lock und ist ein lizenziertes Schienen-Schnittstellensystem, das von Magpul Industries entwickelt und patentiert wurde. Nicht kompatibel zu KeyMod Vorderschäften oder KeyMod Aufnahmen Detail Information: M-LOK® 5-Slot Picatinny Rail Section Fully Compatible with Any M-LOK® Mounting Platform Precision Machined from 6061-T6 Aircraft Grade Aluminum Alloy with Matte Black Hard Coat AnodizeIncludes M-LOK® Steel Locking Nut, Steel Allen Screw and Allen Wrench for InstallationMade in Italy
Kompatibel zu allen M-LOK® Vorderschäften, ideal für den weiteren Aufbau oder zur Befestigung von Vordergriffen, Laser, Licht und Bipods sowie andere Bauteile welche eine M-LOK® Aufnahme besitzen. M-LOK® steht für Modular Lock und ist ein lizenziertes Schienen-Schnittstellensystem, das von Magpul Industries entwickelt und patentiert wurde. Nicht kompatibel zu KeyMod Vorderschäften oder KeyMod Aufnahmen Detail Information: M-LOK® 3-Slot Picatinny Rail Section Fully Compatible with Any M-LOK® Mounting Platform Precision Machined from 6061-T6 Aircraft Grade Aluminum Alloy with Matte Black Hard Coat AnodizeIncludes M-LOK® Steel Locking Nut, Steel Allen Screw and Allen Wrench for InstallationMade in Italy
Premium military equipment from the BRAVO COMPANY SPECS Perfect fit for your BCM® MCMR Handguard. Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile. Aggressive Non-Slip or Non-Reflective surface. Ventilated for cooling. Can be installed in either direction. Measurements: Length 5.550", Width 0.625", Thickness 0.100" Can be cut to any length, depending on users requirements. Made in the U.S.A. of a high-strength polymer material. Each Kit contains five panel strips. MADE IN THE USA
Premium military equipment from the BRAVO COMPANY SPECS COLOR: MAGPUL FDEPerfect fit for your BCM® MCMR Handguard. Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile. Aggressive Non-Slip or Non-Reflective surface. Ventilated for cooling. Can be installed in either direction. Measurements: Length 5.550", Width 0.625", Thickness 0.100" Can be cut to any length, depending on users requirements. Made in the U.S.A. of a high-strength polymer material. Each Kit contains five panel strips. MADE IN THE USA
Premium military equipment from the BRAVO COMPANY SPECS Perfect fit for your BCM® MCMR Handguard. Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile. Aggressive Non-Slip or Non-Reflective surface. Ventilated for cooling. Can be installed in either direction. Measurements: Length 5.550", Width 0.625", Thickness 0.100" Can be cut to any length, depending on users requirements. Made in the U.S.A. of a high-strength polymer material. Each Kit contains five panel strips. Compatible accessories see under this article, accessories. MADE IN THE USA
Ultra Low-profile QD mount for SUREFIRE M300 & M600 Series Scout Lights Will work with SUREFIRE M300 & M600 Series Scout Lights The smoothest functioning QD lever on the market Superior clamping that will not damage or coin the rail surface Extremely smooth in operation with a multi-facetted adjustment nut to get the exact tension required by the operator Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances Hole spacing from center to center .850" Weighs only 1.5 oz. Precision machined for optimum return to zero performance and reliability Hard coat anodized 6061 aluminum for a lifetime of service Patented QD lever by Elite Defense 100% made in the U.SA. MADE IN THE USA
Premium QD Sling Swivel Machined steel swivels with 1¼" loops feature a smooth-operating, centrally-located push-button and polished ball bearing surfaces for easy attachment on firearms equipped with quick-detach bases. Provides quiet, 360° rotation of the swivel to eliminate sling tangle and improve all day carry comfort. Standard model features a standard weight loop formed from 1/8" diameter round stock. Base is knurled for a positive grip, even when wearing heavy gloves. Available with polished blue finish. Heavy Duty swivel is constructed with an extra beefy base and push-button, plus a 3/16" diameter loop to handle maximum weight and abuse. Made for 1 1/4" slings All steel construction Push button operation Black Oxide Finish MADE IN THE USA
Premium QD Sling Machined steel swivels with 1¼" loops feature a smooth-operating, centrally-located push-button and polished ball bearing surfaces for easy attachment on firearms equipped with quick-detach bases. Provides quiet, 360° rotation of the swivel to eliminate sling tangle and improve all day carry comfort. Standard model features a standard weight loop formed from 1/8" diameter round stock. Base is knurled for a positive grip, even when wearing heavy gloves. Available with polished blue finish. Heavy Duty swivel is constructed with an extra beefy base and push-button, plus a 3/16" diameter loop to handle maximum weight and abuse. Made for 1 1/4" slings HD Flush Button models have recessed button to prevent accidental release All steel construction Push button operation Manganese Phosphate Coated MADE IN THE USA
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from Mil-Spec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33". Compatible bipods see under this article, accessories. MADE IN THE USA
One of the best foregrips on the market, compatible with all Picatinny rails, you can carry out professional installation from just 4 slots. For compatible accessories, see accessories under this article. Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. HIGH STRENGTH POLYMER CONSTRUCTION Light weight combined with proven Magpul polymer strength RELIABLE ATTACHMENT TO 1913 PICATINNY RAILS LOW PROFILE DESIGN ERGONOMICALLY DESIGNED Fully adaptable to both the more traditional vertical grip or the thumb grip method AGGRESSIVE TEXTURE FOR POSITIVE WEAPON CONTROL Our TSP design provides an enhanced gripping surface Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. MADE IN THE USA
The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access. MADE IN THE USA
Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (7 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots, max overall length of 3.3". MADE IN THE USA
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option LIGHTWEIGHT REINFORCED POLYMER Cammed T-nuts Recoil / impact mitigation lugs RESOURCES M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allow for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail. TECHNICAL SPECIFICATIONS More Information Attachment 1913 Picatinny Rails Platform AR15, M4, M16 MADE IN THE USA
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allow for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail. TECHNICAL SPECIFICATIONS More Information Attachment 1913 Picatinny Rails Platform AR15, M4, M16 MADE IN THE USA
Compatible with all M1913 Picatinnyrail handguards as well as all Picatinnyrail adapters from a length of 76mm / (8-slots). For compatible adapters, see accessories under this article. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All mounting hardware included. Features Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) All mounting hardware included MADE IN THE USA
The M-LOK Tape Switch Mounting Plate is designed to attach SUREFIRE® UE07 Remote Switch for SCOUT LIGHT® Weaponlights pads on M-LOK compatible systems. It is molded of the same high quality polymer as other Magpul products, combining light weight with rugged construction, and the M-LOK recoil lugs and T-Nuts make for an extremely secure mounting system. A low profile design gives the user more mounting options without interfering with other equipment and its rounded and beveled edges provides a snag-free surface. Specs: Compatible to M-LOK Handguards and M-LOK Interfaces only Included M-LOK Hardware Screw kit RESOURCES M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA
The Magpul WCK (Wire Control Kit) provides a fast, secure, and clean way to manage light and laser wires to create a more streamlined forend on your rifle. The WCK ships with six easy-to-install M-LOK-compatible assemblies. Each assembly is a half-slot size to allow for precise positioning and can route cables straight through, at 90 degrees, or at 180 degrees to accommodate different variations. This kit can be reconfigured as your setup changes, removing the need to reapply tape or zip ties. DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Specs: The WCK is compatible with metal M-LOK handguards and may not fit all polymer handguards The WCK can route standard gauge cables Compatible to M-LOK Handguards and M-LOK Interfaces only Half-slot size allows for precise positioning Compatible accessories see under this article, accessories Technical Specifications Attachment M-LOK Slots Weight 1.75 grams each assembly Other Specs Dimensions (each): 0.78L x 0.63W x 0.25H in. (over rail surface) M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA
The Magpul WCK (Wire Control Kit) provides a fast, secure, and clean way to manage light and laser wires to create a more streamlined forend on your rifle. The WCK ships with six easy-to-install M-LOK-compatible assemblies. Each assembly is a half-slot size to allow for precise positioning and can route cables straight through, at 90 degrees, or at 180 degrees to accommodate different variations. This kit can be reconfigured as your setup changes, removing the need to reapply tape or zip ties. DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Specs: The WCK is compatible with metal M-LOK handguards and may not fit all polymer handguards The WCK can route standard gauge cables Compatible to M-LOK Handguards and M-LOK Interfaces only Half-slot size allows for precise positioning Compatible accessories see under this article, accessories Technical Specifications Attachment M-LOK Slots Weight 1.75 grams each assembly Other Specs Dimensions (each): 0.78L x 0.63W x 0.25H in. (over rail surface) M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA
The M-LOK GI Sling Swivel is a traditional sling swivel loop for M-LOK compatible systems. Its base is machined from Mil-Spec anodized aluminum and utilizes a coated steel loop, which accepts up to 1-1/4” webbing. With its compact and low profile design, it provides a minimal footprint, creating more hand guard real estate. Like any other Magpul M-LOK accessory, the M-LOK GI Sling Swivel features recoil / impact mitigation lugs and cammed T-Nuts for proper M-LOK engagement. M-LOK COMPATIBLE Mounts to all M-LOK compatible hand guards and forends MIL-SPEC DURABILITY Mil-Spec anodized aluminum base with a coated steel loop durability and light weight ACCEPTS UP TO 1-1/4" SLING Coated steel loop accepts up to 1-1/4" sling webbing DESIGNED TO MEET YOUR INDIVIDUAL NEEDS Compact and low profile design with a minimal footprint Beveled edges and low profile reduces snagging Recoil/impact mitigation lugs and cammed T-Nuts for mounting SPECS Compatible accessories see under this article, accessories Attachment M-LOK Slots Weight 0.8 oz. Other Specs Height, Base, From Surface of Hand Guard: 0.4 in. Length, Base: 1.3 in. MADE IN THE USA
Designed for use with all M-LOK compatible hand guards and forends, our 9-slot M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 9 usable slots and a max overall length of 4.1". MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option MIL-SPEC ANODIZED ALUMINUM Cammed T-nuts Recoil / impact mitigation lugs
Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. MADE IN THE USA
Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. MADE IN THE USA
This rubberized thumb rest features an elevated stop and textured grip to accommodate an isosceles shooting stance. Designed to be installed on a MIL-STD-1913 top rail. SPECIFICATIONS Military Grade Durability MIL-STD-1913 and Picatinny Compatibility Material: High Strength Polymer Construction MADE IN THE USA