Schäfte

 A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*. FEATURES •Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others •Sloping cheek weld combines a slim profile with user comfort •Dual-side release latch provides easy adjustment while remaining anti-snag •Premium chrome-silicon lock spring provides positive locking and long service life •Compact rubber butt-pad offers an anti-slip surface and increases impact protection •Rollover on the toe allows for easier shoulder transitions and better fit when using body armor •Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments •1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)   NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube. SPECIFICATIONS** MOE SL-K Carbine Stock, Mil-Spec •Weight: 7.9 oz. •Weight, w/receiver extension: 11.9 oz. •Length, max: 6.5 in. •Height, max: 4.2 in. •LOP Adjustment Range: 3.3 in. •LOP, M4 Collapsed: ~10.3 in. •LOP, M4 Extended: ~13.6 in. * Performance dependant on the host receiver extension's dimensional tolerances.  ** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

 Der MAGPUL MOE SL-K Drop-In Einsatzschaft für AR-15 / M16-Karabiner wurde entwickelt um den Strapazen des modernen Schlachtfelds standzuhalten. Der schlanke Schaft verfügt über eine schräge Wange für einen festen Sitz und verbessert den Benutzerkomfort. Der beidseitige Entriegelungshebel ermöglicht einfache Einstellungen und ist so eingestellt, dass sie nicht mit der Kleidung daran hängenbleiben. Erstklassige Chrom-Silikon-Verriegelungsfeder gewährleistet eine lange Lebensdauer des Buffer-Tube und eine lange Lebensdauer des Schafts. Die interne anti-rattle-Funktion sorgt für einen festen Sitz, um ein Wackeln am Buffer-Tube zu minimieren. Der SL-K Schubschaft von MAGPUL ist der perfekte Einsatzschaft für PCC, IPSC, auch bestens geeignet in Kombination mit Ausrüstung und Plattenträgern. A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*. 100 % Made in U.S.A. FEATURES •Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others •Sloping cheek weld combines a slim profile with user comfort •Dual-side release latch provides easy adjustment while remaining anti-snag •Premium chrome-silicon lock spring provides positive locking and long service life •Compact rubber butt-pad offers an anti-slip surface and increases impact protection •Rollover on the toe allows for easier shoulder transitions and better fit when using body armor •Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments •1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)   NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube. SPECIFICATIONS** MOE SL-K Carbine Stock, Mil-Spec •Weight: 7.9 oz. •Weight, w/receiver extension: 11.9 oz. •Length, max: 6.5 in. •Height, max: 4.2 in. •LOP Adjustment Range: 3.3 in. •LOP, M4 Collapsed: ~10.3 in. •LOP, M4 Extended: ~13.6 in. * Performance dependant on the host receiver extension's dimensional tolerances.  ** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

  Kompatibel zu allen M-LOK® Vorderschäften und M-LOK® Schnittstellen Nicht kompatibel zu KeyMod Vorderschäften oder KeyMod Schnittstellen   M-LOK® steht für Modular Lock und ist ein lizenziertes Schienen-Schnittstellensystem, das von Magpul Industries entwickelt und patentiert wurde. Detail Information:     • UTG PRO® M-LOK® Made in USA Standard QD Sling Swivel Adaptor• Precision Machined from 6061-T6 Aircraft Grade Aluminum with CERACOTE FDE• Lightweight, Low Profile Design Uses the Least Amount of Space M-LOK® Requires While Retaining Optimum Mounting Performance• Adaptor Bidirectionally Mount and Efficiently Utilizes Rail Real Estate by Mounting Either in One Slot or in Between Adjacent Slot on the Same Track• Accepts Any Quick Detach Sling Swivel with 0.37'' Diameter Swivel Stud• QD Swivel Housing Designed with Quarter-turn Rotational Over Travel Stops to Restrict Swivel Movement and Prevent Sling from Unwittingly Getting Tangled• Includes M-LOK® T-Nuts, Screws, and Assembly Tool for Simple and Friendly Installation, No Gunsmith RequiredMADE IN THE USA  

    The Chassis Universal Screw kit contains an assortment of replacement screws to revamp your chassis. If your chassis has seen better days and you'd like to refresh its hardware then this kit is what you are looking for. Contains enough screws to outfit any Cadex Strike chassis.    Cadex Default Material Blackened Stainless MADE IN CANADA

  CADEX M-LOK NVD Rail System for Night Vision Devices, also compatible for Strike Nuke Chassis.   Cadex Default Dimensions 5.8" x 2.65" x 2.15" | 14.73 x 6.73 x 5.46 cm Weight 0.32 lbs | 147 grams Material Aluminum 6061-T6 MADE IN CANADA

  The vertical grip has become quite popular with precision shooters. This grip is made to fit Cadex chassis and identical other manufacturers, not compatible for AR15 rifles. Specifications: Dimensions 2.53" x 1.77" x 4.13"  Weight 0.23 lbs | 108 grams Material Rubber Cadex rubberized grips featuring the CDX logo. Screw and washers included Military Grade Durability NOT compatible to AR-Lower, as there is no hole for the safety spring MADE IN CANADA  

    Kompatibel zu den meisten One-point Sling Swivel Aufnahmen wie bei AR-15, AR-10 Endplates oder anderen QD- Standard Schnittstellen mit QD-Aufnahme, maximale Riemenbreite 31,75mm  Nicht kompatibel zu CAA RONI oder MCK QD-Aufnahmen! Detail Information:     •Standard Push Button QD Sling Swivel with 1,25" Loop•Made from High Strength Steel with Black Finish•Precision Production for Best Fitting with Universal Housing on Stocks and Rails

  Compatible for all TIKKA T3 & TIKKA T3x models in all Short Action calibers which using factory CTR Magazines. Maximum barrel diameter 37,75mm OPTIONAL ACCESSORIES, SEE BELOW THIS ARTICLE, ACCESSORIES     The Cadex Strike Nuke Evo micro-chassis system is designed for shooters looking for traditional stock ergonomics while benefitting from the advantages of chassis systems. The Gen2 improved design with M-LOK technology and high density fiberglass reinforced polymer.    From the lower receiver to the fore-end tube end: approx. 9″ where indicated by the blue arrow. Maximum barrel diameter: 1.250″ Aluminium Micro Chassis Technology / Provides a stable platform that eliminates any movement of the action in the micro-chassis. No bedding required! Adjustable height recoil pad. Neoprene cheek rest. The butt pad can be adjusted 1/2″ up or down.    Adjustable lenght of pull / Optional spacers can be added for a longer length of pull. (Sold in kit of 3 pcs.) Tool- Free spring loaded cheek piece / The cheek rest is adjustable up and down (total travel of 1 inch), right and left (total travel of 5/16 inches), plus in angle for a perfect alignment with the rifle scope eyepiece.   QD Sling Attachmnet / Built-in flush cups on both sides. Optional M-LOK® Bipod rail / Multiple bipod rail positioning   Ambidextrous Palm Grip for comfortable thumb rest    Oversized Trigger guard and magazine release for easy manipulation with gloves. Dimensions: 31.97″ x 2.14″ x 6.95″   81.2 x 5.44 x 17.65 cm Weight: 5.1 lbs   2313 grams MADE IN CANADA Irrtümer, Druckfehler und Änderungen vorbehalten. Unsere Produktfotos und Artikelbeschreibungen sind urheberrechtlich geschützt. Eine Weiterverwendung ohne unsere Zustimmung stellt eine Urheberrechtsverletzung laut § 86 UrhG. dar.

  Compatible for all TIKKA T3 & TIKKA T3x models in all Short Action calibers which using now or later AICS Magazines. Maximum barrel diameter 37,75mm OPTIONAL ACCESSORIES, SEE BELOW THIS ARTICLE, ACCESSORIES     The Cadex Strike Nuke Evo micro-chassis system is designed for shooters looking for traditional stock ergonomics while benefitting from the advantages of chassis systems. The Gen2 improved design with M-LOK technology and high density fiberglass reinforced polymer.    From the lower receiver to the fore-end tube end: approx. 9″ where indicated by the blue arrow. Maximum barrel diameter: 1.250″ Aluminium Micro Chassis Technology / Provides a stable platform that eliminates any movement of the action in the micro-chassis. No bedding required! Adjustable height recoil pad. Neoprene cheek rest. The butt pad can be adjusted 1/2″ up or down.    Adjustable lenght of pull / Optional spacers can be added for a longer length of pull. (Sold in kit of 3 pcs.) Tool- Free spring loaded cheek piece / The cheek rest is adjustable up and down (total travel of 1 inch), right and left (total travel of 5/16 inches), plus in angle for a perfect alignment with the rifle scope eyepiece.   QD Sling Attachmnet / Built-in flush cups on both sides. Optional M-LOK® Bipod rail / Multiple bipod rail positioning   Ambidextrous Palm Grip for comfortable thumb rest    Oversized Trigger guard and magazine release for easy manipulation with gloves. Dimensions: 31.97″ x 2.14″ x 6.95″   81.2 x 5.44 x 17.65 cm Weight: 5.1 lbs   2313 grams MADE IN CANADA Irrtümer, Druckfehler und Änderungen vorbehalten. Unsere Produktfotos und Artikelbeschreibungen sind urheberrechtlich geschützt. Eine Weiterverwendung ohne unsere Zustimmung stellt eine Urheberrechtsverletzung laut § 86 UrhG. dar.

  Compatible for all TIKKA T3 & TIKKA T3x models in all Short Action calibers which using now or later AICS Magazines. Maximum barrel diameter 37,75mm OPTIONAL ACCESSORIES, SEE BELOW THIS ARTICLE, ACCESSORIES     The Cadex Strike Nuke Evo micro-chassis system is designed for shooters looking for traditional stock ergonomics while benefitting from the advantages of chassis systems. The Gen2 improved design with M-LOK technology and high density fiberglass reinforced polymer.    From the lower receiver to the fore-end tube end: approx. 9″ where indicated by the blue arrow. Maximum barrel diameter: 1.250″ Aluminium Micro Chassis Technology / Provides a stable platform that eliminates any movement of the action in the micro-chassis. No bedding required! Adjustable height recoil pad. Neoprene cheek rest. The butt pad can be adjusted 1/2″ up or down.    Adjustable lenght of pull / Optional spacers can be added for a longer length of pull. (Sold in kit of 3 pcs.) Tool- Free spring loaded cheek piece / The cheek rest is adjustable up and down (total travel of 1 inch), right and left (total travel of 5/16 inches), plus in angle for a perfect alignment with the rifle scope eyepiece.   QD Sling Attachmnet / Built-in flush cups on both sides. Optional M-LOK® Bipod rail / Multiple bipod rail positioning   Ambidextrous Palm Grip for comfortable thumb rest    Oversized Trigger guard and magazine release for easy manipulation with gloves. Dimensions: 31.97″ x 2.14″ x 6.95″   81.2 x 5.44 x 17.65 cm Weight: 5.1 lbs   2313 grams MADE IN CANADA Irrtümer, Druckfehler und Änderungen vorbehalten. Unsere Produktfotos und Artikelbeschreibungen sind urheberrechtlich geschützt. Eine Weiterverwendung ohne unsere Zustimmung stellt eine Urheberrechtsverletzung laut § 86 UrhG. dar.

  Flush Cup Sling QD Adaptor  Fit the CDX-MC Kraken, CDX-33 Patriot, CDX-300 Freedom, CDX-30 Guardian and CDX-R7 C.O.P.S. rifles and the Dual Strike, Lite Strike, Field Tactical and Field QD chassis. Also fit non M-LOK generation of CDX-R7 Lite Comp, CDX-R7 Field Comp, CDX-R7 Shepherd & Sheepdog rifles and Lite Competition, Field Competition and Strike Nuke chassis (prior to 2018 models). NOT kompatible for M-LOK® Interfaces. Cadex Default Dimensions 1.44" x 0.75" x 0.33" | 3.67 x 1.91 x 0.86 cm Weight 0.029 lbs | 13 grams Material Aluminum 6061-T6   MADE IN CANADA

   Buttstock Spacer (1 5/16" thick) for all our Strike Chassis except the Urban Strike.   Cadex Default Dimensions 1.3" x 1.81" x 5.63" | 3.3 x 4.6 x 14.3 cm Weight 0.17 lbs | 77 grams Material Polymer MADE IN CANADA 

  Cadex Rubberized Grip  *Screw included Not compatible to AR-Lower Receiver Dimensions 3.38" x 1.8" x 4.13" | 8.59 x 4.57 x 10.16 cm Weight 0.24 lbs | 107 grams Material Rubber   MADE IN CANADA

  This grip is standard on Cadex Defence rifles and chassis and features the Cadex logo and is a standard back angle grip.  This grip is made to fit Cadex chassis and identical other manufacturers, not compatible for AR15 rifles. Specifications: Dimensions 3.38" x 1.8" x 4.13" | 8.59 x 4.57 x 10.16 cm Weight 0.2 lbs | 107 grams Material Rubber Cadex rubberized grips featuring the CDX logo. Screw and washers included Military Grade Durability NOT compatible to AR-Lower, as there is no hole for the safety spring MADE IN CANADA  

  Optional Picatinny rail for Cadex  DUAL STRIKE, LITE STRIKE, LITE COMPETITION and FIELD COMPETITION chassis ONLY. Not compatible to other Chassis / Stocks. NOT kompatible for M-LOK® Interfaces.   MADE IN CANADA