Sonstiges Zubehör
Professional torque screwdriver equipped with TORX® bits, recommended for the assembly of AUDERE products and for whichever application requires a <10Nm torque. The set comes with the torque screwdriver and 3 high-quality bits (TX15, TX20, TX25). Features: Double scaled in Nm and in-lb! Work Area: 2-10 Nm / 22.13-84,08 in-lb 6.35mm (1/4”) Hex drive fot bits Easy-to-read window scale with anti-dust cover Automatic-rebound knob design for easy torque adjustment Double injection grip with anti-slip design Contains 3 pcs high-quality bits (TX15, TX20, TX25) Manual Measurement report with certificate Storage box Weight: 340g
Der AUDERE Celeritas™ Extended Magazine Release Button wird aus hochwertigem T-7075 Aluminium gefertigt, die Oberfläche wurde zusätzlich mit einer MIL-SPEC Type 3 Harteloxalschicht versehen. Absolute Passgenauigkeit und eine einfache Montage wird gewährleistet. Kompatibel zu allen GLOCK® GEN 4 und GEN 5 Modellen. Der AUDERE Celeritas™ Extended Magazine Release Button ist um 2mm länger als der Standard Magazindrücker von GLOCK®. Er wurde von AUDERE konstruiert um eine einfachere und schnellere Auslösung zu ermöglichen. Die angefaste Seite verhindert ein ungewolltes Lösen des Magazins. NICHT kompatibel zu Slim Frame Modellen wie z.B. G43, G48 sowie für Large Frame Modelle wie G21, G30, G41 und zu GEN 1-3 Modellen The design of the Celeritas™ Glock magazine release meets both tactical and sports requirements.Its extended, gripping contact surface allows an easier and more comfortable reach. The tilted side avoids involuntary releases.Made of high-grade aluminium and finished with Type 3 Hardcoat anodizing.• Designed to perform faster magazine changes• Manufactured from high-grade aluminium• Finished with Type 3 Hardcoat anodizing (MIL-A-8625 TYPE 3)• Compatible with all Gen 4 and Gen 5 Glocks AUDERE ist ein Hersteller von Schusswaffenzubehör der 2016 gegründet wurde. Dieser entwickelt und produziert eigenständig auf modernsten CNC-Maschinen taktische Ausrüstungen und Zubehör für Small Arms von höchster Qualität und hat ein breites Spektrum von Anwendern aus Militär, Law Enforcement sowie für den Schießsport und die Jagd. Das Entwicklungsteam besteht aus aktiven Schützen mit unterschiedlichem Hintergrund und Waffenwissen. Modernste technische Fertigungs- und Qualitätssicherungsverfahren stellen sicher, dass diese Produkte die höchsten Industriestandards übertreffen.
The 3mm is our low-profile extension for the Staccato/Springfield Prodigy/Atlas/Infinity 9/38 2011 style magazine. Leaving in the factory spring and follower it will be a +1 on a 126, 140 and 170mm magazine. Although it will work on all 2011 magazines, its recommended as a low-profile pad for the 126 magazine to bump it from 17 to 18 rounds. And for the 170mm competition magazine big sticks it bumps it from 26 to 27. If you use our competition thin follower and extra power 13 coil spring it bumps it to 29 and still fits the 170mm USPSA gauge (but will not slide lock on last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA
This Taran Tactical Innovations base pad works on Sig Sauer P320 Full Size 17/21 round 9mm and 14/18 round .40 S&W Full Size Magazine Bodies. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI SIG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA. The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Due to magazine variances, some magazines may require slight modification to fit the 140mm gauge. * * Remove the metal insert at the bottom before installation * * This base pad is compatible with the stock P320 X5 magwell * * Remove the metal insert at the bottom before installation * * NOT compatible with carry size frames * * Magazine NOT included * TTI FIREPOWER +1 BASE PAD FOR FULL SIZE SIG P320 AND FULL SIZE X5 IS COMPATIBLE WITH: 17 and 21 Round 9mm Magazine 14 and 18 Round 40 S&W Magazine SIG P320 +1 BASE PAD IS DESIGNED TO WORK WITH STOCK MAGAZINE SPRINGS. Patented proven push pin design. Super easy to attach and detach from the magazine. No specialty tools or devices required to disassemble. One piece design, no extra parts to possibly lose during disassembly. The added weight helps the magazine drop free easily for faster reloads. CNC machined from billet aluminum. Hard Anodized.Made in the USA.
The 7mm is our longest extension for the Staccato/Infinity/Springfield Prodigy/Atlas/Infinity/MBX 9/38 2011 style magazine and Bul Armory SAS II Pistols. Although it will work with all 2011 style magazines it is recommended for the 140mm Magazines for Open/Unlimited division and the 126mm because that’s what John Wick will do. On the 140mm magazine, the 7mm extension bumps the capacity from 20 rounds to 22 rounds with the factory spring and follower. For even more added capacity, use our thin competition follower and extra power 11 coil spring for an impressive 24 round capacity (but will not lock the slide to the rear on the last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA
The 4mm is our mid profile extension for the Staccato/Infinity/Springfield Prodigy/Atlas/Infinity 9/38 2011 style magazine. Although it will work on all 2011 style magazines, it is recommended for the 140mm magazine. It brings the capacity up from 20 rounds to 22 rounds with the factory spring and follower and still fits the USPSA 140mm gauge. If you want even more added capacity use our thin competition follower and extra power 11 coil spring to bump the capacity up to 23 rounds (but will not lock the slide to the rear on the last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA
The TTI Benelli M1/M4 Ultimate Charging Handle is designed by Taran Butler to be the perfect size and feel, with its unique knurling and serrations, to function during high-speed Tactical operations and 3-Gun competitions. Specs: Gen2, Non-twistable versionIt is machined from billet stainless steel and coated with Ion Bond (95 Rockwell) in their new Gunmetal Gray finish.It is virtually indestructible.The product weighs 1oz, and is designed to work with 12 gauge shotguns.MADE IN THE USA
Will work on all Benelli Benelli 12 and 20 gauge M1,M2,M3,M4, Super Black Eagle, Montefeltro Shotguns Specs: Made of aircraft grade aluminum with mil spec hard anodizing. Designed to be big enough to easily & quickly release the bolt in the heat of competition but not be too big to get caught on things on a defensive tactical shotgun. Extensive testing of prototypes as well as previously existing bolt releases has proven this design to be perfect in size and dimension. You never want to run your shotgun dry during a match but, if you do, this part can help you get back into action as fast as possible. The TTI Oversized Bolt Release has already proven itself by winning all major divisions at the 3-Gun Nationals in 2013 as well as the 3-Gun Nation Championship. 5/40 Screw includedMADE IN THE USA USED AND TRUSTED BY THE BEST 3-GUNNERS ON EARTH: Keith Garcia, Nils Jonasson, Jesse Duff, Katie Harris, Clint Upchurch, Rob Romero, Jansen Jones, Randi Rogers, Kurt Miller, Todd Jarrett, Chuck Anderson, Burton Thompson, Allie Barrett, Blake Miguez, and the Taran Butler, himself.
Shirt specs: District®, Perfect Tri Tee 50% Polyester, 25% Cotton, 25% Rayon Male model: 6', 200 lbs. 4.5 ounce 1x1 rib knit neck Tear away label Color: Olive SIZE: L MADE IN THE USA
Shirt specs: District®, Perfect Tri Tee 50% Polyester, 25% Cotton, 25% Rayon Male model: 6', 200 lbs. 4.5 ounce 1x1 rib knit neck Tear away label Color: Black SIZE: L MADE IN THE USA
1mm / .039" Fluorescent Fiber use for all TTI sights. Fiber glows at ends by light reflecting from side of fiber. 1-2 inches.MADE IN THE USA
Work on MOS version and aftermarket Optic cut slides Comes in sets of 2 pcs Thread: 6-32 Length: 3/8 '' / 9,52 mm T15 Torx head Material: TitanMADE IN THE USA
Specifications: GEN2, fits now A1 and A2 modelsProfessional grade one piece designSimple installation, includes all toolsExtremely lightweight designSlim 1.6 inch diameterOne five slot M-LOK™ compatible rail includedFeatures two anti-rotation QD sling swivel socketsConstructed of 6061 aluminum, hard coat anodized for a lifetime of service100% Made in the U.S.A., 922R CompliantMI Lifetime WarrantyPatented Products COMPATIBILITY: Compatible with HK MP5, and clones such as Century AP5, Zenith ZF5 and Military Arms Corporation MAC 5. Note: SKU MI-MP5M variant now fits both HK MP5 and MP5 A2 firearms that have sling loops on both sides of firearmThis product is NOT compatible with any MP5 .22LR firearms. Installed Weight: 4.8oz
Developed by DeSantis Gunhide, the Pegasus Slim-Tuk is a new minimal ambidextrous IWB/OWB holster fashioned from Kydex sheet. The user has the ability to choose whether they want to utilize a leather 1.5” 2-hole belt loop for OWB carry, or a tuckable 1.75” 360-degree C-clip for IWB carry. All hardware can be reversed to change from right to left hand. MADE IN THE USA
Original spare part Compatibility: MOSSBERG 930MOSSBERG 940 JM ProMOSSBERG 940 Tactical MADE IN THE USA
Original spare part kit Kit includes: ExtractorExtractor SpringExtractor Plunger Compatibility: MOSSBERG 930MOSSBERG 935MOSSBERG 940 JM ProMOSSBERG 940 Tactical MADE IN THE USA
Easy, no gunsmith install, all tools included Allows the user to mount an optic and a light or laser while retaining the factory handguard Patent pending rock solid design Weight 3.3oz. Overall Length 4 3/8" Constructed of 6061 aluminum, hard coat anodized for a lifetime of service 100% Made in the U.S.A., 922R Compliant MADE IN THE USA
The MIDWEST INDUSTRIES Benelli M4 Enhanced Charging Handle has the perfect size and feel, with its unique knurling texture and serrations, to function during high-speed Tactical operations and 3-Gun competitions. SPECS Compatible with Benelli M4 and Clones such as Military Armament Corporation from SDS Imports Knurled texture for enhanced grip Constructed from 4140 Steel 100% Made in the USA with a lifetime warranty MADE IN THE USA
Das Unternehmen SILENT STEEL aus Finnland produziert hochwertige modulare Schalldämpfer mit modernster Baffle Technologie. Die Produkte finden Anwendung bei Behörden, Militär und im zivilen Bereich. Alle Produkte werden in Finnland entwickelt sowie produziert und halten den härtesten Einsatzbedingungen stand. Details: SILENT STEEL Suppressor Pouch Hochwertige Verarbeitung Optimaler Schutz beim Transport und in der Lagerung Material: Cordura, innen gepolstert Farbe: Flat Dark Earth One Size Fit: Kompatibel zu allen SILENT STEEL Flow und Baffle Suppressor Modellen Geeignet für Schalldämpfer mit maximalen Abmessungen von bis zu 200x50mm Suppressor not includedMADE IN FINLAND
Das Unternehmen SILENT STEEL aus Finnland produziert hochwertige modulare Schalldämpfer mit modernster Baffle Technologie. Die Produkte finden Anwendung bei Behörden, Militär und im zivilen Bereich. Alle Produkte werden in Finnland entwickelt sowie produziert und halten den härtesten Einsatzbedingungen stand. Details: SILENT STEEL Suppressor Pouch Hochwertige Verarbeitung Optimaler Schutz beim Transport und in der Lagerung Material: Cordura, innen gepolstert Farbe: Olive Drab Green One Size Fit: Kompatibel zu allen SILENT STEEL Flow und Baffle Suppressor Modellen Geeignet für Schalldämpfer mit maximalen Abmessungen von bis zu 200x50mm Suppressor not includedMADE IN FINLAND
Das Unternehmen SILENT STEEL aus Finnland produziert hochwertige modulare Schalldämpfer mit modernster Baffle Technologie. Die Produkte finden Anwendung bei Behörden, Militär und im zivilen Bereich. Alle Produkte werden in Finnland entwickelt sowie produziert und halten den härtesten Einsatzbedingungen stand. Details: SILENT STEEL Suppressor Pouch Hochwertige Verarbeitung Optimaler Schutz beim Transport und in der Lagerung Material: Cordura, innen gepolstert Farbe: Schwarz One Size Fit: Kompatibel zu allen SILENT STEEL Flow und Baffle Suppressor Modellen Geeignet für Schalldämpfer mit maximalen Abmessungen von bis zu 200x50mm Suppressor not includedMADE IN FINLAND
Premium Beretta 1301 MXT Extension Kit * ONLY for Tactical models * Features: MXT magazine extension designed exclusively for the 1301 Tactical Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4″ shells and may vary with shells of differing length) This package has a special +2 extension tube is exclusive to this kit and not available separately. (If you try to build your own kit our standard +2 will extend about 1/2″ past the muzzle) Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment Utilizes factory magazine spring (spare generic spring included) MADE IN THE USA
Für D.A.R. Enthusiasten ist jetzt das hochwertig gestickte Patch erhältlich. Mittels Klettverschluss an jedes Cap, Rucksack oder Transporttasche individuell und schnell befestigt.
Spezifikationen: Schwenkbar Höhenverstellung, 6- Stufen Funktion Federunterstützte Füße, klappbar Längeneinstellung: 6-9 Zoll / 152,4 – 228,6mm Aufnahme für Riemenbügelösen/ Sling Swivel Stud Kompatible Picatinny Sling Swivel Stud Adapter siehe unter diesem Artikel, Zubehör Features: Extends from 6” to 9” Swivels (tilts) to compensate for uneven terrain. Notched legs in 1” increments Legs are spring loaded, for fast deployment. Attaches to the Sling Swivel Stud Ultralight weight – 14 oz Has a built-in sling swivel stud to attach the sling. Most useful for shooting off the bench. 100% Made in the USA. Material: Heat treated steel and hard alloys Hard Rubber Leg Caps Polymer Knob Finish: Anodized Black Understanding The Different Leg Types SMOOTH LEGS Allow numerous height adjustments when legs are pulled out. The thumb screws on each leg lock in the desired height. Smooth legs will retract back under spring tension.The bipod stows conveniently out of the way when not in use, folding toward the muzzle. Stowed legs are kept firmly in place by sturdy spring returns. NOTCHED LEGS Spring loaded and when the release button is depressed, they kick out to maximum height. Adjustments are locked in at 1-inch intervals and released by the push of a button on each leg. Notched legs are available on the BR (6-9 inch) and L (9-13 inch) bipod models. The bipod stows conveniently out of the way when not in use, folding toward the muzzle. Stowed legs are kept firmly in place by sturdy spring returns. SELF-LEVELING LEGS Allows the shooter to quickly set up on uneven surfaces and adjust the leg height without leaving their position. Self-leveling legs are available on the BR (6-9 inch) and L (9-13 inch) bipod models. Self-leveling legs allow numerous height adjustments and just takes a simple twist of the locking mechanism to keep it in position. In order to keep the legs fully retracted or ejected the locking mechanism must be tightened. The bipod stows conveniently out of the way when not in use, folding toward the muzzle. Stowed legs are kept firmly in place by sturdy spring returns. MADE IN THE USA