KYNSHOT-BLITZKRIEG AR 9mm Hydraulic Recoil Buffer - CARBINE LENGTH

The RB5007 is a specially engineered KynSHOT for the 9mm PCC application. Designed in cooperation with Blitzkrieg Components, LLC. to work in PCC builds with 3.5" - 16" barrels, either suppressed or unsuppressed and with all common 9mm loads.

Compatible to Carbine Lenght Buffer Tubes

Compatible to 9mm Standard Blowback Systems

** Use the SPRINCO 25004 9mm Extra Power Buffer Spring RED for optimal performance **

NOT compatibel to CMMG's 9mm Radial Delayed Blowback System, use RB5000HP for trouble-free operation!

This buffer has proven itself in the harsh arena of PCC competition and is the choice of many of the top ranked shooters in the world. The KynSHOT uses patented hydraulic shock absorption technology to dampen the impact of the bolt at the rear of its travel and to dampen the forward impact of the buffer’s weight as it chambers the next round. Its weight and length have been optimized for the 9mm application so that it runs reliably, softens recoil, smooths out the action, and stops just behind the bolt catch. (ECCN Controlled). Compatible accessories see under this article, accessories.

FAQ / Frequently Asked Questions

What is the difference between RB5007 and RB5015HD?

• The RB5007 is our standard damped PCC buffer which is used for direct blowback PCC’s that have a barrel length of less than 8”.
• The RB5015HD is designed for all suppressed PCC’s, barrel length independent.
• The RB5015HD is designed for all PCC’s with a barrel length of 8 inches or more.

The reason why we have two PCC buffers is because you add a suppressor or longer barrel to the PCC the bolt cycles much harder than shorter barrels.

The RB5015HD is also a perfect choice for other PCC calibers such as the .40SW, .45ACP, and 10mm. The RB5015HD has enhanced damping than the RB5007.

NOTE: 

Some German firearm manufacturers do not use a Carbine Length Buffer Tube according to Mil-Spec diameter.

Please check before ordering whether the depth of the tube is 6.96"/176.70mm (tolerance +/-2mm)!

BENEFITS 

• Drop-In Replacement
• Reduce felt recoil
• Improve reliability
• Reduce bolt carrier speed
• Reduce wear on parts
• Reduce shock and vibration to optics
• Suppress bolt bounce
• Decrease sight movement
• Smoother operation
• Faster shot recovery time
• Military grade materials and manufacturing

SPECIFICATIONS 

• Weight: 6.0 Ounces.
• Length when Compressed: 3.90”
• Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F to 150F
• High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion.
• Compatible accessories see under this article, accessories 

MADE IN THE USA

Subject to printing errors and changes. Our product pictures and item descriptions are protected by copyright. Any further use without our consent constitutes a copyright infringement in accordance with § 86 of the Copyright Act.