RADIAN WEAPONS GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 COMPRESSOR™ Quick-Tune Guide Rod Kit

 Most adjustable guide rods on the market use a cap screw to retain the spring. The problem? Loose screws are too common and thread locker forces you to commit to one spring weight.

Enter the screwless design of the COMPRESSOR Quick-Tune Guide Rod. The dovetail interface is captured by the spring, creating a simple and secure lock-up. Flutes along the guide rod allow the spring to move with less friction for smoother cycling. The heat treated guide rod has a slick, durable, and corrosion-resistant Nitride finish.

Included:

• 1 - Hardened 17-4 SS Guide Rod
• 3 - Flat wire Springs in 13lb, 15lb, and 18 lb weights
• 1 - SS Washer for Gen3
• 1 – SS Captive bushing for Gen4 & Gen5 compatibility

Specs:

• Compatible with GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 models
  
• NOT compatible with other models

INSTALLATION INSTRUCTIONS

• STEP 1 | Compress installed spring and insert tool* into the cross hole to hold the spring down.
• STEP 2 | Remove the dovetailed end cap. Then remove the tool from the cross hole, allowing the spring to be removed.
• STEP 3 | Install a different spring weight, compress new spring, and insert the tool back into the cross hole again.
• STEP 4 | Align dovetail to install cap, remove the tool, and allow spring to capture around the dovetail interface.
• While a tool is not necessary for the Radian guide rod, it can assist in holding the spring down when removing and installing the cap.

MADE IN THE USA