The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Rear Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 Rear Sight sits at standard AR-height when deployed and includes a windage adjustable, rapid-select aperture system. MBUS 3 Sights will be available in Black, Flat Dark Earth FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Ambidextrous push-button deployment and rapid-select rear aperture system 0.55” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction, smaller size provides light weight and resists operational abuse MAG1167 MBUS 3 Sight – Rear Installation Instructions MBUS 3 Sights Install Video TECHNICAL SPECIFICATIONS More Information Position Rear Height above rail, stowed ~0.55 in. Platform AR10, AR15, M4, M16, M110, SR25 Weight, w/ hardware 30 g Other Specs Center of aperture to top of rail: 1.41 in. WINDAGE ADJUSTMENT ~0.5 MOA (0.606”/100m) per click with a 14.5" sight radius~0.4 MOA (0.439”/100 m) per click with a 20" sight radius MADE IN THE USA

  The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Front Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 Front Sight sits at standard AR-height when deployed and includes tool-less elevation adjustment of a dual width enhanced front post similar to the MBUS Pro. MBUS 3 Sights will be available in Black, Flat Dark Earth FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Tool-less elevation adjustment and dual width enhanced front sight post, similar to MBUS Pro 0.47” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction, smaller size provides light weight and resists operational abuse MAG1166 MBUS 3 Sight – Front Installation Instructions MBUS 3 Sights Install Video TECHNICAL SPECIFICATIONS More Information Position Front Height above rail, stowed ~0.47 in. Platform AR10, AR15, M4, M16, M110, SR25 Weight, w/ hardware 25 g Other Specs ELEVATION ADJUSTMENT ~1 MOA (1.131”/100 m) per click with a 14.5" sight radius~0.7 MOA (0.820”/100 m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed forend on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards. MADE IN THE USA

  The Magpul ACS-L (Adaptable Carbine Stock - Light) Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. PLENTY OF CHEEK WELD Sloping cheek weld provides a wide contact surface for user comfort AR STOCK WITH STORAGE Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below) Storage compartment in tail of stock with positive latching access door on right hand side SHIELDED RELEASE LATCH Supplemental friction lock minimizes accuracy robbing wobble*. Shielded release latch prevents snagging and accidental operation ANTI-SLIP RUBBER BUTT-PAD Replaceable rubber 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments LONG LASTING ADJUSTABILITY Premium chrome-silicon lock spring provides positive locking and long service life Sling Mounts: Mid - Included reversible Sling Mount Kit -TYPE 3 fits up to 1.5" push-button swivels (swivel not included) Rear/Bottom - 1.00" sling loop Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Collection Collapsible Storage AR Stocks Platform  AR10, AR15, M4, M16, M110, SR25 LOP, M4 Collapsed    ~11.3 in. LOP, M4 Extended     ~14.6 in. LOP Adjustment Range              3.3 in. Length, max             7.9 in. Height, max             5.2 in. Weight     12.4 oz. Weight, w/ receiver extension   ~16.2 oz. Width, max              2.2 in. Width of Butt, max   1.7" Compatible accessories see under this article, accessories.             *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The ACS-L Carbine Stock will only fit with the common Mil-Spec tube.Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.Friction lock performance may vary depending on the host receiver extension's dimensional tolerances. MADE IN THE USA

  The Magpul ACS-L (Adaptable Carbine Stock - Light) Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. PLENTY OF CHEEK WELD Sloping cheek weld provides a wide contact surface for user comfort AR STOCK WITH STORAGE Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below) Storage compartment in tail of stock with positive latching access door on right hand side SHIELDED RELEASE LATCH Supplemental friction lock minimizes accuracy robbing wobble*. Shielded release latch prevents snagging and accidental operation ANTI-SLIP RUBBER BUTT-PAD Replaceable rubber 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments LONG LASTING ADJUSTABILITY Premium chrome-silicon lock spring provides positive locking and long service life Sling Mounts: Mid - Included reversible Sling Mount Kit -TYPE 3 fits up to 1.5" push-button swivels (swivel not included) Rear/Bottom - 1.00" sling loop Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Collection Collapsible Storage AR Stocks Platform  AR10, AR15, M4, M16, M110, SR25 LOP, M4 Collapsed    ~11.3 in. LOP, M4 Extended     ~14.6 in. LOP Adjustment Range              3.3 in. Length, max             7.9 in. Height, max             5.2 in. Weight     12.4 oz. Weight, w/ receiver extension   ~16.2 oz. Width, max              2.2 in. Width of Butt, max   1.7" Compatible accessories see under this article, accessories.             *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The ACS-L Carbine Stock will only fit with the common Mil-Spec tube.Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.Friction lock performance may vary depending on the host receiver extension's dimensional tolerances. MADE IN THE USA

  The Magpul UCS (Universal Carbine Stock) is designed to be the ideal supplement to the wide array of firearms utilizing a vertical M1913 Picatinny rail on the rear of the receiver. To accommodate a variety of charging handles styles, ejection port locations, and control locations, the UCS features a reversible hinge for left and right folding configurations, and five degrees of drop for clearance. The UCS ships with two exclusive Cheek Risers (0.50ʺ, and 0.75ʺ) and, when combined with the reversible M1913 clamp (allowing for a 1/2-slot height adjustment), the shooter can dial in head placement for an optimal sight picture using iron sights or optics. Offering three (3) inches of length of pull (LOP) adjustment spanning six (6) positions – which can be changed via the LOP buttons on the sides – the stock fits any shooter, with and without armor or other bulky equipment. The UCS also includes a reversible, anti-rotation QD socket for sling attachments, and features the MOE SL® Enhanced Rubber Butt-Pad, 0.70" for user comfort. Specs Weight: 18 oz. Width, max: 1.9 in. (at hinge) COMPATIBILITY Receivers equipped with an M1913 rail instead of a buffer tube from the factory, or receivers with an M1913 aftermarket adapter, including but not limited to the SIG MPX/MCX, FN SCAR, IWI Galil, CZ Scorpion, Ruger LC carbine, Brownell's BRN-180, and certain AK variants such as the PSA AK/AK-V. NOT compatible with TYPE 1 and TYPE 2 Sling Mount Kits, CTR®, AK , or Hunter/SGA® Cheek Risers, nor CTR, PRS, or Hunter Butt-Pads. LENGTH OF PULL (LOP) Exact LOP range varies, known Max/Min LOP follows: Tinck Arms X-16  CMMG Dissent CMMG Mk4 CMMG MkGs Sig MCX: 11.6 - 14.6 in. Sig MPX: 11.9 - 14.9 in. FN SCAR pistol: 12.1 - 15.1 in. IWI Galil: 11.6 - 14.6 in. CZ Scorpion: 11.9 - 14.9 in. Ruger LC Carbine: 13.6  - 16.6 in. PSA AK: 12.0 - 15.0 in. Compatible accessories see under this article, accessories. MADE IN THE USA 

  The Magpul UCS (Universal Carbine Stock) is designed to be the ideal supplement to the wide array of firearms utilizing a vertical M1913 Picatinny rail on the rear of the receiver. To accommodate a variety of charging handles styles, ejection port locations, and control locations, the UCS features a reversible hinge for left and right folding configurations, and five degrees of drop for clearance. The UCS ships with two exclusive Cheek Risers (0.50ʺ, and 0.75ʺ) and, when combined with the reversible M1913 clamp (allowing for a 1/2-slot height adjustment), the shooter can dial in head placement for an optimal sight picture using iron sights or optics. Offering three (3) inches of length of pull (LOP) adjustment spanning six (6) positions – which can be changed via the LOP buttons on the sides – the stock fits any shooter, with and without armor or other bulky equipment. The UCS also includes a reversible, anti-rotation QD socket for sling attachments, and features the MOE SL® Enhanced Rubber Butt-Pad, 0.70" for user comfort. Specs Weight: 18 oz. Width, max: 1.9 in. (at hinge) COMPATIBILITY Receivers equipped with an M1913 rail instead of a buffer tube from the factory, or receivers with an M1913 aftermarket adapter, including but not limited to the SIG MPX/MCX, FN SCAR, IWI Galil, CZ Scorpion, Ruger LC carbine, Brownell's BRN-180, and certain AK variants such as the PSA AK/AK-V. NOT compatible with TYPE 1 and TYPE 2 Sling Mount Kits, CTR®, AK , or Hunter/SGA® Cheek Risers, nor CTR, PRS, or Hunter Butt-Pads. LENGTH OF PULL (LOP) Exact LOP range varies, known Max/Min LOP follows: Tinck Arms X-16  CMMG Dissent CMMG Mk4 CMMG MkGs Sig MCX: 11.6 - 14.6 in. Sig MPX: 11.9 - 14.9 in. FN SCAR pistol: 12.1 - 15.1 in. IWI Galil: 11.6 - 14.6 in. CZ Scorpion: 11.9 - 14.9 in. Ruger LC Carbine: 13.6  - 16.6 in. PSA AK: 12.0 - 15.0 in. Compatible accessories see under this article, accessories. MADE IN THE USA 

  The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight. Made in the USA Specs Compatibility: AR15, M4, M16,  NOT compatible with HECKLER & KOCH and HAENEL models

  The TMAG 20 AR/M4 GEN M3 is a highly reliable, translucent, 20-round magazine for STANAG-compatible weapons chambered in 5.56x45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable stainless-steel spring for corrosion resistance. A paint-pen dot matrix allows for custom markings to be applied by the shooter, and the TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. TECHNICAL SPECIFICATIONS More Information Caliber 5.56x45mm / .223 Remington Platform AR15, M4, M16, SA-80 Capacity 20 rounds Weight 3.6 oz. Length, max 5.7 in. Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others

  When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used with special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines TECHNICAL SPECIFICATIONS  Platform: AR10, M110, SR25 Compatibility: Most aluminum, steel, and polymer 7.62 /.308 magazines   MADE IN THE USA

  The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.  By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from Mil-Spec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included.  Max overall length of 2.33". Compatible bipods see under this article, accessories. MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 3/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG327-BLK 1005-01-591-6041 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA  

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 3/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG327-BLK 1005-01-591-6041 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA 

  Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.  The MBUS Pro Offset Rear Sight features durable QPQ salt bath nitrided steel construction, positive detented lockup when deployed, tool-less windage adjustment for easy zeroing, dual rear apertures, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. ALL STEEL CONSTRUCTION Finished with QPQ salt bath nitride for extreme resistance to wear and corrosion WINDAGE ADJUSTMENT KNOB No tools required SNAG-FREE, TUCKED AWAY PROFILE WHEN STOWED Positive detents in both the up and down positions as well as on the elevation knob LOW PROFILE WHEN DEPLOYED Standard AR height over bore when deployed, 45 degree offset to the right-hand side SPECS Compatible accessories see under this article, accessories   Position Rear Height above rail, stowed ~0.18 in. Length, stowed 2.0 in. Weight, w/ hardware 2.0 oz. Other Specs Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail. Only compatible with MBUS Pro OFFSET Front sight, MAG525. Small aperture dia.: 0.07 in. Large aperture dia.: 0.19 in. WINDAGE ADJUSTMENT ~0.5 MOA (0.566"/100m) per click with a 14.5" sight radius ~0.4 MOA (0.410"/100m) per click with a 20" sight radius  MADE IN THE USA

  Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Front Sight features durable QPQ salt bath nitrided steel construction, positive detented lockup when deployed, tool-less adjustment of the front post for easy zeroing, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. ALL STEEL CONSTRUCTION Finished with QPQ salt bath nitride for extreme resistance to wear and corrosion ELEVATION ADJUSTMENT KNOB No tools required SNAG-FREE, TUCKED AWAY PROFILE WHEN STOWED Positive detents in both the up and down positions as well as on the elevation knob SLIM AND UNOBTRUSIVE WHEN DEPLOYED Standard AR height over bore when deployed, 45 deg. offset right-hand side SPECS Compatible accessories see under this article, accessories Position Front Height above rail, stowed ~0.18 in. Length, stowed 1.9 in. Weight, w/ hardware 1.8 oz. Other Specs Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks. Only compatible with MBUS Pro OFFSET Rear sight, MAG526. ELEVATION ADJUSTMENT ~1 MOA (1.131"/100m) per click with a 14.5 in. sight radius ~0.7 MOA (0.820"/100m) per click with a 20 in. sight radius MADE IN THE USA

  The new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances. With its all steel construction, this is the sighting solution that delivers no-tool adjustments, maximum strength, corrosion resistance, and functionality in a compact package. Positive detents keep the MBUS Pro LR at standard AR sight height when deployed and so low when stowed that you will hardly notice them. ALL STEEL CONSTRUCTION Case hardened and finished with QPQ salt bath nitride for extreme resistance to wear and corrosion WINDAGE ADJUSTABLE WITH LOW-PROFILE KNOB No tools required Standard AR sight height when deployed ELEVATION ADJUSTMENT WHEEL FOR 200-600 METER DISTANCES SPECS NSN: MAG527-BLK 1005-01-668-8372 Compatible accessories see under this article, accessories Position Rear Height above rail, stowed ~0.49 in. Length, stowed 2.2 in. Weight, w/ hardware 2.0 oz. Other Specs Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail. Small aperture dia.: 0.07 in. Large aperture dia.: 0.19 in. MADE IN THE USA

  The MBUS (Magpul® Back-Up Sight) Pro is a corrosion-resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable rear and no-tool, elevation adjustable front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width front sight is compatible with most IR aiming laser and light installations for the professional user. ALL STEEL CONSTRUCTION Finished with QPQ salt bath nitride for extreme resistance to wear and corrosion 0.432" HEIGHT ABOVE RAIL AT TALLEST POINT AND COVERS LESS THAN 1-5/8" OF RAIL WHEN STOWED STANDARD AR SIGHT HEIGHT WHEN DEPLOYED Positive detents in both the up and down positions as well as on the elevation knob ELEVATION ADJUSTMENT KNOB Elevation adjustment knob – no tools required Steel, rectangular sight post selectable between Match and Standard widths: 0.04” Match width for increased precision 0.06” Standard width for maximum visibility SPECS NSN: MAG275-BLK 1005-01-629-5549 Compatible accessories see under this article, accessories Position Front Height above rail, stowed ~0.43 in. max Length, stowed 1.6 in. Weight 1.5 oz. Other Specs COMPATIBILITY Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks. ELEVATION ADJUSTMENT ~1 MOA (1.131”/100 m) per click with a 14.5" sight radius~0.7 MOA (0.820”/100 m) per click with a 20" sight radius MADE IN THE USA

  The M-LOK GI Sling Swivel is a traditional sling swivel loop for M-LOK compatible systems. Its base is machined from Mil-Spec anodized aluminum and utilizes a coated steel loop, which accepts up to 1-1/4” webbing. With its compact and low profile design, it provides a minimal footprint, creating more hand guard real estate. Like any other Magpul M-LOK accessory, the M-LOK GI Sling Swivel features recoil / impact mitigation lugs and cammed T-Nuts for proper M-LOK engagement. M-LOK COMPATIBLE Mounts to all M-LOK compatible hand guards and forends MIL-SPEC DURABILITY Mil-Spec anodized aluminum base with a coated steel loop durability and light weight ACCEPTS UP TO 1-1/4" SLING Coated steel loop accepts up to 1-1/4" sling webbing DESIGNED TO MEET YOUR INDIVIDUAL NEEDS Compact and low profile design with a minimal footprint Beveled edges and low profile reduces snagging Recoil/impact mitigation lugs and cammed T-Nuts for mounting SPECS Compatible accessories see under this article, accessories Attachment M-LOK Slots Weight 0.8 oz. Other Specs Height, Base, From Surface of Hand Guard: 0.4 in. Length, Base: 1.3 in. MADE IN THE USA

  The Extended Rubber Butt-Pad, 0.55" comes standard with the CTR® and MOE® Commercial-Spec Carbine stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact / drop mitigation. Also compatible with the Mil-Spec models as well as all STR®, ACS-L™, and ACS® stocks for 0.25" increased length-of-pull. Mounts with existing hardware. SPECS Compatibility: CTR / MOE / STR / ACS / ACS-L / Mil-Spec stocks Compatible accessories see under this article, accessories MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/2 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG326-BLK 1005-01-591-6035 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/2 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS NSN: MAG326-BLK 1005-01-591-6035 Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA

  Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is fully extended. Originally designed for M14 carbine stock conversions. SPECS Compatibility: Non AR15 / M4 applications as the riser may interfere with charging handle function unless stock is fully extended Compatible accessories see under this article, accessories. MADE IN THE USA

  The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards. The MS1 allows easy shoulder transitions, rapid adjustability for hands-free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter for the sling (such as our Paraclip™, QDM or QD Sling Swivel), you can easily configure your MS1 for your fit and carry needs. In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions. FEATURES THE MS1 SLIDER Dedicated two-point sling Rapidly adjustable for length (shorter or longer) with new MS1 Slider No tails, loops, or other potential snag hazards CUSTOM SNAG-FREE HIGH-DURABILITY 1-1/4" WEBBING Custom 1-1/4" wide nylon webbing material is strong and wear resistant while remaining anti-chafe for user comfort Colored webbing has Near Infrared (NIR) treatment to reduce IR signature REINFORCED POLYMER HARDWARE Light weight yet durable hardware made of heavy-duty polymer SPECS Attachment hardware not included Compatible accessories see under this article, accessories Length, Overall Nominal 48-60 in. ± 5 in. adjustment Slider Adjustment Range 10 in. Weight 6.0 oz. Width, Webbing 1.25 in. MADE IN THE USA

  The MS1 Lite Sling is a compact version of the versatile MS1 rifle sling. We created a custom woven 1” wide single-ply webbing to drastically reduce extra bulk and offer a high-strength, streamlined sling that avoids snagging. The custom weave resists rolling and twisting, keeping the MS1 Lite consistently comfortable while maintaining the no-pill and anti-chafe characteristics that Magpul slings are known for. The smaller size also allows for easier stowage in tight, snag-prone areas such as cases, racks, and weapon safes. Optimized for minimal bulk while maintaining maximum strength, a more compact MS1 slider was designed specifically for this sling. It provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards. The MS1 Lite allows easy shoulder transitions, rapid adjustability for hands-free rifle carry, and shooting support from various positions. The MS1 Lite is ideal for lightweight or smaller-form firearms. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4® slings. By adding the appropriate adapter for the sling (such as our Paraclip™, QDM, or QD Sling Swivel), you can easily configure your MS1 for your fit and carry needs. Even with the MS1 Lite’s smaller size, we made sure it performs just as well as its larger predecessors. We put it through the same rigorous controlled lab and field tests to ensure it can stand up to the wet, dry, and sandy conditions you encounter when hunting, working, at the range, and everywhere in between. LIGHTWEIGHT WITH MINIMAL BULK TO STOW EASILY Custom anti-chafe, 1" wide, single-ply webbing minimizes rolling and twisting CUSTOM 1" SLIDER MINIMIZES SIZE AND MAINTAINS STRENGTH Lightweight yet durable hardware made of heavy-duty polymer SPECS Attachment hardware not included Length, Overall Nominal 48-60 in. ± 5 in. adjustment Slider Adjustment Range 10 in. Weight 3.0 oz. Width, Webbing 1.0 in. MADE IN THE USA

  The MS1 Lite Sling is a compact version of the versatile MS1 rifle sling. We created a custom woven 1” wide single-ply webbing to drastically reduce extra bulk and offer a high-strength, streamlined sling that avoids snagging. The custom weave resists rolling and twisting, keeping the MS1 Lite consistently comfortable while maintaining the no-pill and anti-chafe characteristics that Magpul slings are known for. The smaller size also allows for easier stowage in tight, snag-prone areas such as cases, racks, and weapon safes. Optimized for minimal bulk while maintaining maximum strength, a more compact MS1 slider was designed specifically for this sling. It provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards. The MS1 Lite allows easy shoulder transitions, rapid adjustability for hands-free rifle carry, and shooting support from various positions. The MS1 Lite is ideal for lightweight or smaller-form firearms. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4® slings. By adding the appropriate adapter for the sling (such as our Paraclip™, QDM, or QD Sling Swivel), you can easily configure your MS1 for your fit and carry needs. Even with the MS1 Lite’s smaller size, we made sure it performs just as well as its larger predecessors. We put it through the same rigorous controlled lab and field tests to ensure it can stand up to the wet, dry, and sandy conditions you encounter when hunting, working, at the range, and everywhere in between. LIGHTWEIGHT WITH MINIMAL BULK TO STOW EASILY Custom anti-chafe, 1" wide, single-ply webbing minimizes rolling and twisting CUSTOM 1" SLIDER MINIMIZES SIZE AND MAINTAINS STRENGTH Lightweight yet durable hardware made of heavy-duty polymer SPECS Attachment hardware not included Length, Overall Nominal 48-60 in. ± 5 in. adjustment Slider Adjustment Range 10 in. Weight 3.0 oz. Width, Webbing 1.0 in. MADE IN THE USA

  Building on the heritage and proven performance of Magpul's MS Sling series, the Magpul RLS (Rifleman Loop Sling) is a durable, lightweight, and affordable shooting aid and retention device. Combining the best features of Rhodesian and 1907 match-style slings, the RLS was created with Magpul's famous proprietary nylon mesh webbing and high-strength polymer hardware. In a retention role, the RLS serves dutifully as an unobtrusive weapon sling and retention device, securely keeping the rifle tucked behind the shoulder. When called upon, the RLS is rapidly employed with the adjustable forward loop gripping the riflemans support arm, locking in a steady shooting position and firmly planting the rifle butt against the shoulder. The Magpul RLS was designed with mobility in mind. At a mere 4.4 oz, the optimized weight of the RLS doesnt add unnecessary ounces to the rifle and weighs less than many competing slings and straps. Like all Magpul slings, the RLS has been extensively tested to its limit to ensure reliability and performance in wet, dry, and sandy conditions, to include load and drop testing. Its been hiked with, biked with, swam, climbed, hunted and shot (a lot) with in a variety of field conditions. The American-made Magpul RLS combines legendary Magpul innovation, quality, and design into a simple and effective shooting aid for less money than many slings that merely carry a rifle. The RLS Sling is made in the USA and is fully Berry Amendment compliant. THE WEBBING Made of Magpul’s proprietary chafe-resistant 1 ¼” nylon mesh webbing Tubular construction eliminates harsh edges that can rub or snag and provides double layers of cushioned comfort against the end user while shouldered During employment, the strap’s smooth texture remains comfortable, even when torqued against the user’s arm Like all Magpul slings, colored webbing is NIR treated to reduce infrared signature THE HARDWARE Features lightweight reinforced high-strength injection-molded polymer hardware Inlcudes a proprietary sling keeper that leaves no tails or loose straps, eliminating snag hazards and distractions SPECS Attachment hardware not included Compatible accessories see under this article, accessories Weight 4.4 oz. Width, Webbing 1.25 in. MADE IN THE USA

  Building on the heritage and proven performance of Magpul's MS Sling series, the Magpul RLS (Rifleman Loop Sling) is a durable, lightweight, and affordable shooting aid and retention device. Combining the best features of Rhodesian and 1907 match-style slings, the RLS was created with Magpul's famous proprietary nylon mesh webbing and high-strength polymer hardware. In a retention role, the RLS serves dutifully as an unobtrusive weapon sling and retention device, securely keeping the rifle tucked behind the shoulder. When called upon, the RLS is rapidly employed with the adjustable forward loop gripping the riflemans support arm, locking in a steady shooting position and firmly planting the rifle butt against the shoulder. The Magpul RLS was designed with mobility in mind. At a mere 4.4 oz, the optimized weight of the RLS doesnt add unnecessary ounces to the rifle and weighs less than many competing slings and straps. Like all Magpul slings, the RLS has been extensively tested to its limit to ensure reliability and performance in wet, dry, and sandy conditions, to include load and drop testing. Its been hiked with, biked with, swam, climbed, hunted and shot (a lot) with in a variety of field conditions. The American-made Magpul RLS combines legendary Magpul innovation, quality, and design into a simple and effective shooting aid for less money than many slings that merely carry a rifle. The RLS Sling is made in the USA and is fully Berry Amendment compliant. THE WEBBING Made of Magpul’s proprietary chafe-resistant 1 ¼” nylon mesh webbing Tubular construction eliminates harsh edges that can rub or snag and provides double layers of cushioned comfort against the end user while shouldered During employment, the strap’s smooth texture remains comfortable, even when torqued against the user’s arm Like all Magpul slings, colored webbing is NIR treated to reduce infrared signature THE HARDWARE Features lightweight reinforced high-strength injection-molded polymer hardware Inlcudes a proprietary sling keeper that leaves no tails or loose straps, eliminating snag hazards and distractions SPECS Attachment hardware not included Compatible accessories see under this article, accessories Weight 4.4 oz. Width, Webbing 1.25 in. MADE IN THE USA

  The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines. It incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Loop is made of pliable Santoprene rubber overmolded onto a stainless steel plate. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. SPECS NSN: MAG020-BLK 1005-01-560-2100 NSN: MAG020-FDE 1005-01-616-4912 NSN: MAG020-ODG 1005-01-616-4900 Technical Specifications More Information Platform AR15, M4, M16 Compatibility USGI 30-round aluminum magazines MADE IN THE USA

  The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines. It incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Loop is made of pliable Santoprene rubber overmolded onto a stainless steel plate. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. SPECS NSN: MAG020-BLK 1005-01-560-2100 NSN: MAG020-FDE 1005-01-616-4912 NSN: MAG020-ODG 1005-01-616-4900 Technical Specifications More Information Platform AR15, M4, M16 Compatibility USGI 30-round aluminum magazines MADE IN THE USA

  Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AK platform. Grip counts as one US compliance part for 922r. MORE VERTICAL GRIP ANGLE THAN TYPICAL KALASHNIKOV DESIGNS / AGGRESSIVE TSP TEXTURE FOR POSITIVE WEAPON CONTROL Drop-in upgrade for AK47/AK74 pistol grips* Fits both milled and stamped receivers, including those with grip reinforcement plates STORAGE CORE CAPABILITY ACCEPTS OPTIONAL CORES Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage  MADE IN THE USA

  Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AK platform. Grip counts as one US compliance part for 922r. MORE VERTICAL GRIP ANGLE THAN TYPICAL KALASHNIKOV DESIGNS / AGGRESSIVE TSP TEXTURE FOR POSITIVE WEAPON CONTROL Drop-in upgrade for AK47/AK74 pistol grips* Fits both milled and stamped receivers, including those with grip reinforcement plates STORAGE CORE CAPABILITY ACCEPTS OPTIONAL CORES Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage  MADE IN THE USA

  The Magpul ACS (Adaptable Carbine/Storage) - Mil-Spec model is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR®, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and accuracy*. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. AR STOCK WITH STORAGE Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, LMT, S&W, and others (please see the note below) Storage compartment in tail of stock with positive latching access door on right hand side WATER-RESISTANT STORAGE Two water-resistant battery storage tubes located on the left and right sides of the stock.  Each tube will store up to three CR123 lithium or two AA batteries and tubes are accessible from the rear via a tethered, hand-removable rubber plug PLENTY OF CHEEK WELD Sloping cheek weld provides a wide contact surface for user comfort SHIELDED RELEASE LATCH Supplemental friction lock minimizes accuracy-robbing wobble*. Shielded release latch prevents snagging and accidental operation SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments Rear/Bottom - 1.00" sling loop Sling Mounts: Mid - Included reversible Sling Mount Kit - TYPE 3 fits up to 1.5" push-button swivels (swivel not included) SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  The Magpul ACS (Adaptable Carbine/Storage) - Mil-Spec model is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR®, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and accuracy*. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. AR STOCK WITH STORAGE Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, LMT, S&W, and others (please see the note below) Storage compartment in tail of stock with positive latching access door on right hand side WATER-RESISTANT STORAGE Two water-resistant battery storage tubes located on the left and right sides of the stock.  Each tube will store up to three CR123 lithium or two AA batteries and tubes are accessible from the rear via a tethered, hand-removable rubber plug PLENTY OF CHEEK WELD Sloping cheek weld provides a wide contact surface for user comfort SHIELDED RELEASE LATCH Supplemental friction lock minimizes accuracy-robbing wobble*. Shielded release latch prevents snagging and accidental operation SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments Rear/Bottom - 1.00" sling loop Sling Mounts: Mid - Included reversible Sling Mount Kit - TYPE 3 fits up to 1.5" push-button swivels (swivel not included) SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  At only eight ounces, the MOE® Trigger Release (TR) is one of Magpul’s lightest stocks. Thanks to its ambidextrous, textured Trigger Release adjustment mechanism, it’s also one of the easiest for making LOP adjustments, as well as installing or removing the stock. The Trigger Release combines with a newly developed takedown lever that also makes the MOE TR stock our easiest stock to install and remove on your firearm. That means no more leveraging a high-tension spring to mount and remove your stock; the innovative, one-handed toolless takedown lever allows quick and easy installation and removal. It includes a “padlock” icon to indicate whether the stock is locked or unlocked. Once the lever is positioned in the “locked” position, it can’t be removed from the receiver extension, ensuring it won’t slide off when making LOP adjustments. The takedown lever is also partially recessed to minimize snagging while still permitting easy access to select it when necessary. For sling attachment, the TR includes ambidextrous M-LOK® slots on each side of rear of the stock that function as a footman’s loop or a space to attach M-LOK QD Sling Mounts. NEW TRIGGER RELEASE SLIDER MECHANISM  Ambidextrous sliding, textured, low-profile control trigger pulls double duty as a simple one-handed LOP adjustment lever, as well as allows for toolless installation and removal EASY INSTALLATION A takedown lever on the bottom of the stock permits full retraction of the trigger so the stock can slide on and off the receiver extension with minimal effort The takedown lever's position is indicated with a padlock icon showing the trigger’s status for installation or LOP adjustment MINIMALIST, LIGHTWEIGHT DESIGN One of the lightest MOE stocks created at only 8.0 ounces CUSTOMIZABLE Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear ambidextrous M-LOK® slots function as a footman's loop for direct sling attachment, and can also accept optional M-LOK QD Sling Mounts for push-button swivels Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP  SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  At only eight ounces, the MOE® Trigger Release (TR) is one of Magpul’s lightest stocks. Thanks to its ambidextrous, textured Trigger Release adjustment mechanism, it’s also one of the easiest for making LOP adjustments, as well as installing or removing the stock. The Trigger Release combines with a newly developed takedown lever that also makes the MOE TR stock our easiest stock to install and remove on your firearm. That means no more leveraging a high-tension spring to mount and remove your stock; the innovative, one-handed toolless takedown lever allows quick and easy installation and removal. It includes a “padlock” icon to indicate whether the stock is locked or unlocked. Once the lever is positioned in the “locked” position, it can’t be removed from the receiver extension, ensuring it won’t slide off when making LOP adjustments. The takedown lever is also partially recessed to minimize snagging while still permitting easy access to select it when necessary. For sling attachment, the TR includes ambidextrous M-LOK® slots on each side of rear of the stock that function as a footman’s loop or a space to attach M-LOK QD Sling Mounts. NEW TRIGGER RELEASE SLIDER MECHANISM  Ambidextrous sliding, textured, low-profile control trigger pulls double duty as a simple one-handed LOP adjustment lever, as well as allows for toolless installation and removal EASY INSTALLATION A takedown lever on the bottom of the stock permits full retraction of the trigger so the stock can slide on and off the receiver extension with minimal effort The takedown lever's position is indicated with a padlock icon showing the trigger’s status for installation or LOP adjustment MINIMALIST, LIGHTWEIGHT DESIGN One of the lightest MOE stocks created at only 8.0 ounces CUSTOMIZABLE Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear ambidextrous M-LOK® slots function as a footman's loop for direct sling attachment, and can also accept optional M-LOK QD Sling Mounts for push-button swivels Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  The MOE PR is a full-size carbine stock that blends the simplicity of the legacy MOE Carbine Stock with design lines reminiscent of the PRS® Lite. These similarities naturally incorporate some of the features found on the PRS Lite, including a rest on the front edge of the stock for the support hand that allows shooters to apply rearward pressure to drive the stock securely into the shoulder for precise shot placement, and the bottom of the stock’s frame also serves as a bag rider. Other features include a sloping cheek weld that combines a slim profile with user comfort, and a non-slip, rubber butt-pad that increases impact protection and allows for easier shoulder transitions and better fit with body armor. For sling attachment, the MOE PR includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount. SIMPLE DESIGN, PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles SECURE FIT Shielded, ambidextrous release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life CUSTOMIZABLE Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear M-LOK slot functions as a footman's loop for direct sling attachment, and can also accept the optional M-LOK® QD Sling Mount for push-button swivels Side mounting slots accept optional CTR® Cheek Risers for NON AR15/M4 applications Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  The MOE PR is a full-size carbine stock that blends the simplicity of the legacy MOE Carbine Stock with design lines reminiscent of the PRS® Lite. These similarities naturally incorporate some of the features found on the PRS Lite, including a rest on the front edge of the stock for the support hand that allows shooters to apply rearward pressure to drive the stock securely into the shoulder for precise shot placement, and the bottom of the stock’s frame also serves as a bag rider. Other features include a sloping cheek weld that combines a slim profile with user comfort, and a non-slip, rubber butt-pad that increases impact protection and allows for easier shoulder transitions and better fit with body armor. For sling attachment, the MOE PR includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount. SIMPLE DESIGN, PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles SECURE FIT Shielded, ambidextrous release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life CUSTOMIZABLE Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear M-LOK slot functions as a footman's loop for direct sling attachment, and can also accept the optional M-LOK® QD Sling Mount for push-button swivels Side mounting slots accept optional CTR® Cheek Risers for NON AR15/M4 applications Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  The Magpul WCK (Wire Control Kit) provides a fast, secure, and clean way to manage light and laser wires to create a more streamlined forend on your rifle. The WCK ships with six easy-to-install M-LOK-compatible assemblies. Each assembly is a half-slot size to allow for precise positioning and can route cables straight through, at 90 degrees, or at 180 degrees to accommodate different variations. This kit can be reconfigured as your setup changes, removing the need to reapply tape or zip ties. DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Specs: The WCK is compatible with metal M-LOK handguards and may not fit all polymer handguards The WCK can route standard gauge cables Compatible to M-LOK Handguards and M-LOK Interfaces only Half-slot size allows for precise positioning Compatible accessories see under this article, accessories Technical Specifications Attachment M-LOK Slots Weight 1.75 grams each assembly Other Specs Dimensions (each):  0.78L x 0.63W x 0.25H in. (over rail surface) M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

  The Magpul WCK (Wire Control Kit) provides a fast, secure, and clean way to manage light and laser wires to create a more streamlined forend on your rifle. The WCK ships with six easy-to-install M-LOK-compatible assemblies. Each assembly is a half-slot size to allow for precise positioning and can route cables straight through, at 90 degrees, or at 180 degrees to accommodate different variations. This kit can be reconfigured as your setup changes, removing the need to reapply tape or zip ties. DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Specs: The WCK is compatible with metal M-LOK handguards and may not fit all polymer handguards The WCK can route standard gauge cables Compatible to M-LOK Handguards and M-LOK Interfaces only Half-slot size allows for precise positioning Compatible accessories see under this article, accessories Technical Specifications Attachment M-LOK Slots Weight 1.75 grams each assembly Other Specs Dimensions (each):  0.78L x 0.63W x 0.25H in. (over rail surface) M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

The DT Carbine Stock is a drop-in replacement buttstock for AR15/M16/M4 carbines (or comparable platforms) equipped with Mil-Spec profile receiver extensions. It merges the best features of the SL® and CTR® product lines with its new dual tensioning technology, which provides greater strength and security for a more rugged and stable platform that’s easy to adjust. The DT Stock is an A-frame style carbine stock that features an auto-engaging friction lock that’s reflexive and inert during adjustment. This produces additional tension on the buffer tube, providing extra tight lockup that minimizes movement between the stock’s lock pin and receiver extension. The result is increased durability in case of severe impacts and quick, smooth, and frictionless length-of-pull adjustments on the fly. Other features include a unique, non-slip butt-pad that matches the footprint of the SL line and incorporates the optimized curvature from the CTR, an ambidextrous adjustment lever, a rotation-limiting QD sling mount, and a 1.25” footman’s loop. NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, FN and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when using body armor Sloping cheek weld combines a slim profile with user comfort Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear 1.25" sling loop Rotation-limiting, integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) SPECS Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

The DT Carbine Stock is a drop-in replacement buttstock for AR15/M16/M4 carbines (or comparable platforms) equipped with Mil-Spec profile receiver extensions. It merges the best features of the SL® and CTR® product lines with its new dual tensioning technology, which provides greater strength and security for a more rugged and stable platform that’s easy to adjust. The DT Stock is an A-frame style carbine stock that features an auto-engaging friction lock that’s reflexive and inert during adjustment. This produces additional tension on the buffer tube, providing extra tight lockup that minimizes movement between the stock’s lock pin and receiver extension. The result is increased durability in case of severe impacts and quick, smooth, and frictionless length-of-pull adjustments on the fly. Other features include a unique, non-slip butt-pad that matches the footprint of the SL line and incorporates the optimized curvature from the CTR, an ambidextrous adjustment lever, a rotation-limiting QD sling mount, and a 1.25” footman’s loop. NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, FN and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when using body armor Sloping cheek weld combines a slim profile with user comfort Compatible with our Magpul CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear 1.25" sling loop Rotation-limiting, integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 CARBINE LENGTH MIL-SPEC Buffer Tubes only Compatible accessories see under this article, accessories. MADE IN THE USA

  The Magpul ESK (Enhanced Selector Kit) – AR is a modular, ambidextrous selector kit designed for AR pattern firearms that provides user-configurable selectors with modern ergonomics at an accessible price. The selector axle is reversible for 60 or 90-degree throw options and is made of fully-machined, heat-treated chromoly steel with a QPQ finish for extreme resistance to wear and corrosion. The ESK – AR includes three heavy-duty polymer levers - Full-Length, Short, and Hybrid - which can be mounted as desired by pressing onto either side of the axle's keyways with zero wobble. The selector pins come in black and red for user preference and act as non-load bearing secondary lever locks as well as selector position indicators. Installing the kit is extremely easy once the grip is removed, and if you ever want to reconfigure your levers all that’s required is a small punch or hex key to pop the selector pin back out. The kit also includes a spring and corrosion-resistant detent with low-friction coating for smooth yet positive function. Designed for Mil-Spec AR-pattern lower receivers CONSTRUCTED OF HIGH-STRENGTH POLYMER AND CORROSION-RESISTANT STEEL Easy drop-in installation Made in the USA Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 NOT compatible with HECKLER & KOCH and HAENEL models NOT compatible with select fire receivers

  The Magpul ESK (Enhanced Selector Kit) – AR is a modular, ambidextrous selector kit designed for AR pattern firearms that provides user-configurable selectors with modern ergonomics at an accessible price. The selector axle is reversible for 60 or 90-degree throw options and is made of fully-machined, heat-treated chromoly steel with a QPQ finish for extreme resistance to wear and corrosion. The ESK – AR includes three heavy-duty polymer levers - Full-Length, Short, and Hybrid - which can be mounted as desired by pressing onto either side of the axle's keyways with zero wobble. The selector pins come in black and red for user preference and act as non-load bearing secondary lever locks as well as selector position indicators. Installing the kit is extremely easy once the grip is removed, and if you ever want to reconfigure your levers all that’s required is a small punch or hex key to pop the selector pin back out. The kit also includes a spring and corrosion-resistant detent with low-friction coating for smooth yet positive function. Designed for Mil-Spec AR-pattern lower receivers CONSTRUCTED OF HIGH-STRENGTH POLYMER AND CORROSION-RESISTANT STEEL Easy drop-in installation Made in the USA Specs Compatibility: AR15, AR10, M4, M16, M110, SR25 NOT compatible with HECKLER & KOCH and HAENEL models NOT compatible with select fire receivers

The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover.Color: Coyote TanOur GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding.Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance.Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.MADE IN THE USA

  The M-LOK Tape Switch Mounting Plate is designed to attach SUREFIRE® UE07 Remote Switch for SCOUT LIGHT® Weaponlights pads on M-LOK compatible systems. It is molded of the same high quality polymer as other Magpul products, combining light weight with rugged construction, and the M-LOK recoil lugs and T-Nuts make for an extremely secure mounting system. A low profile design gives the user more mounting options without interfering with other equipment and its rounded and beveled edges provides a snag-free surface. Specs: Compatible to M-LOK Handguards and M-LOK Interfaces only Included M-LOK Hardware Screw kit  RESOURCES M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

   The new DT-PR stock is the Precision Rifle (PR) variant of our new Dual-Tension (DT) series of carbine stocks. It incorporates Magpul’s proprietary, patent-pending DT adjustment system, mitigating play between the buffer tube and the stock, resulting in a tighter fit across the stock’s entire length of pull. It also minimizes snagging of facial hair and skin where the shooter’s face contacts the stock. The DT-PR has a contoured butt-pad for improved shoulder purchase and minimal contact with the collar bone, allowing shooters to maintain comfort during heads-up and heads-down shooting with various optics. The extended bottom of the stock provides shooters with an exceptionally steady contact point on squeeze bags for more precise shots when prone, while remaining entirely functional as an on-the-move tactical platform. The DT-PR includes an ambidextrous, rotation-limited QD cup for sling attachment. It's also compatible with Magpul’s legacy CTR Cheek Risers when the stock is fully extended or on rifles without rear-facing charging handles, giving shooters adjustable comb height for improved efficiency in target acquisition and field of view. For a lot less than other precision stocks, the DT-PR provides an incredibly steady platform combined with better control. NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Side mounting slots accept optional CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Includes ambidextrous, rotation-limiting sling swivel sockets and a footmans loop for different sling mounting options MADE IN THE USA

  The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Technical Specifications Caliber 5.56x45mm / .223 Remington Platform AR15, M4, M16, SA-80 Capacity 30 rds Weight 5 oz. Length, max 7.5 in. Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others MADE IN THE USA

  The PMAG 30 AR/M4 GEN M2 MOE is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO/.223 Remington that offers a cost-competitive upgrade from the aluminum USGI magazine. It features impact-resistant polymer construction, an easy-to-disassemble design with a flared floorplate for positive magazine extraction, a resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality. NSN: MAG571-BLK 1005-01-576-5159   IMPROVED FLOORPLATE Flared floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouches ADVANCED DESIGN A constant-curve internal geometry, over-travel insertion stop on the spine and a long-life stainless steel spring ensure smooth feeding The anti-tilt, self-lubricating follower ensures a smooth feed and enhances magazine reliability AR15/M4 COMPATIBILITY Optimized for use with Colt-spec AR15/M4 firearms STRONGER THAN EVER Impact and crush-resistant polymer construction NON SLIP DESIGN Its ribbed gripping surface and aggressive front and rear texture provide positive magazine handling MADE IN THE USA

   The DT-PR stock is the Precision Rifle (PR) variant of our new Dual-Tension (DT) series of carbine stocks. It incorporates Magpul’s proprietary, patent-pending DT adjustment system, mitigating play between the buffer tube and the stock, resulting in a tighter fit across the stock’s entire length of pull. It also minimizes snagging of facial hair and skin where the shooter’s face contacts the stock. The DT-PR has a contoured butt-pad for improved shoulder purchase and minimal contact with the collar bone, allowing shooters to maintain comfort during heads-up and heads-down shooting with various optics. The extended bottom of the stock provides shooters with an exceptionally steady contact point on squeeze bags for more precise shots when prone, while remaining entirely functional as an on-the-move tactical platform. The DT-PR includes an ambidextrous, rotation-limited QD cup for sling attachment. It's also compatible with Magpul’s legacy CTR Cheek Risers when the stock is fully extended or on rifles without rear-facing charging handles, giving shooters adjustable comb height for improved efficiency in target acquisition and field of view. For a lot less than other precision stocks, the DT-PR provides an incredibly steady platform combined with better control. NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever PRECISION INFLUENCES Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests ENHANCED ERGONOMICS Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Side mounting slots accept optional CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP SLING POINT VARIETY Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Includes ambidextrous, rotation-limiting sling swivel sockets and a footmans loop for different sling mounting options MADE IN THE USA

  The PMAG 30 AK/AKM MOE is an inexpensive, lightweight, highly reliable 30-round polymer magazine designed for Kalashnikov-pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R and others). It features a removable floorplate, constant curve geometry, stainless steel spring, and a high-reliability / low-friction follower for the affordable performance you expect from a MOE PMAG. Made in the USA.

   The MOE RL (Reversed Lever) Carbine Stock is a streamlined, A-frame design that replaces OEM stocks and provides clean aesthetics and ease of use. The easily accessible, unobtrusive, reversed adjustment lever is inset into the front of the stock, allowing the stock’s length of pull to be adjusted in overall length from 10.7ʺ to 14ʺ*. The stock also offers a slightly increased cheek-weld area for enhanced shooter comfort. Combining these two aspects of the MOE RL Carbine stock allows shooters to adjust the LOP on the fly if necessary while maintaining a positive check weld; this keeps the shooter locked into the gun and promotes continued situational awareness.  To further increase shooter comfort, the MOE RL Stock is compatible with the MOE SL® Enhanced Rubber Butt-Pad so shooters can use the recoil pad that best fits their circumstances. For sling attachment, the RL includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount.  Weight, w/ receiver extension ~12.1 oz. Width, max 1.7 in. Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The MOE RL Carbine Stock will only fit with the common Mil-Spec tube. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates. MADE IN THE USA

   The MOE RL (Reversed Lever) Carbine Stock is a streamlined, A-frame design that replaces OEM stocks and provides clean aesthetics and ease of use. The easily accessible, unobtrusive, reversed adjustment lever is inset into the front of the stock, allowing the stock’s length of pull to be adjusted in overall length from 10.7ʺ to 14ʺ*. The stock also offers a slightly increased cheek-weld area for enhanced shooter comfort. Combining these two aspects of the MOE RL Carbine stock allows shooters to adjust the LOP on the fly if necessary while maintaining a positive check weld; this keeps the shooter locked into the gun and promotes continued situational awareness.  To further increase shooter comfort, the MOE RL Stock is compatible with the MOE SL® Enhanced Rubber Butt-Pad so shooters can use the recoil pad that best fits their circumstances. For sling attachment, the RL includes an ambidextrous M-LOK® slot in the rear of the stock that functions as a footman’s loop or a space to attach an M-LOK QD Sling Mount.  Weight, w/ receiver extension ~12.1 oz. Width, max 1.7 in. Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The MOE RL Carbine Stock will only fit with the common Mil-Spec tube. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Will not interfere with single-point slings attached to ASAP or ASAP QD receiver end plates. MADE IN THE USA

  Compatible with M1913 Picatinny rail handguards and Picatinny rail adapters with a length of 76mm or more (8 slots). Compatible KeyMod or M-LOK® Picatinny rail adapters can be found under "Accessories" in this article. The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. MOUNTS TO PICATINNY AND NATO STANAG 4694 Easily mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails. Minimum of 3" recommended  All mounting hardware included Its smaller size allows mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. Attachment 1913 Picatinny Rails Height, over rail 1.94 in. Length 4.70 in. Weight 2.53 oz. Other Specs Width, maximum: 1.37 in. MADE IN THE USA

   The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. The Rugged Tactical Grip was designed for fast paced rigorous use. Featuring a 19.5 degree grip angle and an aggressive laser texture, the RTG provides intense tactile feedback, promoting responsive weapon movements and improved agility.   This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle.  Two sizes are available- this TYPE 1 Kit (MAG520) fits most 5.56x45 and 7.62x51 AR receivers and the TYPE 2 Kit (MAG521) which is required for some 7.62x51 size receivers*.  All mounting hardware is included. * NOTE: This TYPE 1 Kit fits all AR15/M4's as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716.   The TYPE 2 Kit uses taller backstraps for optimized fit with certain 7.62x51 receivers such as the Armalite AR-10A/B/T, DPMS LR308, KAC SR25, LaRue OBR, LMT .308 MWS, Palmetto PA10, and S&W M&P10.   In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function. TECHNICAL SPECIFICATIONS Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degrees Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. MADE IN THE USA

  The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables.  The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allow for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.  TECHNICAL SPECIFICATIONS  More Information Attachment 1913 Picatinny Rails Platform AR15, M4, M16 MADE IN THE USA

  The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. MADE IN THE USA

The Magpul GL Enhanced Magazine Well for GLOCK 17 GEN 4 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. The Magpul GL Enhanced Magazine Well for Glock 17 Gen 4 are not compatible as delivered out of the box with optional factory Glock Modular Back Straps. The Magpul GL Enhanced Magazine Well for Glock 17 Gen 4 are not compatible to other generations or other Glock models. While end user modification is minor and may be attempted, it is taken at the user's own risk. Due to inherent variances in Glock frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith complete the installation and mitigate the potential for frame damage. REINFORCED POLYMER CONSTRUCTION Easy installation Rugged polymer formula holds up to rough handling LARGE RAMP AREA FOR EASIER RELOADING EXTERNAL DIMENSIONS ENSURE MINIMAL PRINTING WHEN CARRYING CONCEALED COMPATIBLE WITH MAGPUL, OEM AND MOST AFTERMARKET MAGAZINE FLOOR PLATES AND MAGAZINE EXTENSIONS  MADE IN THE USA

 The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o'clock positions on M-LOK compatible hand guards and forends. Machined from Mil-Spec anodized aluminum, this mounting solution features beveled ends and corners to reduce snagging and sharp edges. The Offset Light/Optic Mount allows for the direct attachment of the Surefire® M300/600 series of Scout Lights® or other MIL-STD-1913 Picatinny light and optic mounts. The optional Magpul Light Mount V-BLock and Rings can also be used to attach hand held lights with a diameter from 0.75 to 1.03 in. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. FOR USE WITH M-LOK COMPATIBLE HANDGUARDS AND FORENDS Four slots allow for attachment of Picatinny light and optic mounts   POSITIONS LIGHT OR OPTICS AT EITHER THE 11 OR 1 O'CLOCK POSITIONS   M-LOK Description and FAQs M-LOK Installation Tips TECHNICAL SPECIFICATPOSITIONS  Attachment M-LOK Slots Other Specs COMPATIBILITY For use with M-LOK compatible hand guards and forends. Surefire® M300/600 series of Scout Lights® may be directly attached. MADE IN THE USA

  The next-generation PMAG 20 AR/M4 GEN M3 is a 20-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. GEN M3 features of long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.The PMAG 20 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. MADE IN THE USA

The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCARN MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris ntrusion and protect against potential damage to the top cartridge during storage and transit. Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel® system provides positive verification without affecting the durability or reliability of the magazine. MADE IN THE USA

  A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip provides a welcome addition to the iconic AK platform.   AGGRESSIVE TSP TEXTURE Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage. MAG523 MOE AK Grip – AK47/AK74 Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AK / AKM Grip Angle 24 degrees Thickness, max 1.2 in. Weight, w/ hardware 2.9 oz. Other Specs Height, max: 4.1 in. *NOTE: Due to the wide range of tolerances of AK receivers, some custom fitting of the grip may be necessary.  MADE IN THE USA

  When installed on the base of a 5.56x45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines Compatible accessories see under this article, accessories. TECHNICAL SPECIFICATIONS  Platform: AR15, M4, M16 Compatibility: Most aluminum, steel, and polymer 5.56 x 45 magazines MADE IN THE USA

 A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*. FEATURES •Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others •Sloping cheek weld combines a slim profile with user comfort •Dual-side release latch provides easy adjustment while remaining anti-snag •Premium chrome-silicon lock spring provides positive locking and long service life •Compact rubber butt-pad offers an anti-slip surface and increases impact protection •Rollover on the toe allows for easier shoulder transitions and better fit when using body armor •Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments •1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)   NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube. SPECIFICATIONS** MOE SL-K Carbine Stock, Mil-Spec •Weight: 7.9 oz. •Weight, w/receiver extension: 11.9 oz. •Length, max: 6.5 in. •Height, max: 4.2 in. •LOP Adjustment Range: 3.3 in. •LOP, M4 Collapsed: ~10.3 in. •LOP, M4 Extended: ~13.6 in. * Performance dependant on the host receiver extension's dimensional tolerances.  ** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

   One of the best foregrips on the market, compatible with all Picatinny rails, you can carry out professional installation from just 4 slots.  For compatible accessories, see accessories under this article.  Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. HIGH STRENGTH POLYMER CONSTRUCTION Light weight combined with proven Magpul polymer strength RELIABLE ATTACHMENT TO 1913 PICATINNY RAILS LOW PROFILE DESIGN ERGONOMICALLY DESIGNED Fully adaptable to both the more traditional vertical grip or the thumb grip method    AGGRESSIVE TEXTURE FOR POSITIVE WEAPON CONTROL Our TSP design provides an enhanced gripping surface   Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.  MADE IN THE USA

  Lightweight bipod, compatible with all 1913 Picatinny rails as well as all 1913 Picatinny rails. The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

  The PMAG 10 AK/AKM MOE is an inexpensive, lightweight, highly reliable 10-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, and others). It features a removable floorplate, constant curve geometry, and a high-reliability / low-friction follower for the affordable performance you expect from a MOE PMAG.  MADE IN THE USA

  Lightweight but incredibly strong, our PMAG D-50 GL9 is a highly reliable, 9x19mm Parabellum, 50-round drum magazine optimized for double-stack 9mm GLOCK handguns. The Magpul D-50 GL9 – GLOCK boasts many of the proven features of its 5.56 and 7.62 predecessors, the PMAG D-60® AR/M4 and PMAG D-50® LR/SR GEN M3®, while providing the user with a similar magazine capacity increase. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. To keep track of your available firepower, we’ve included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller. Easily disassembled for cleaning and featuring an innovative bolt hold-open feature, the D-50 GL9 reliably locks the bolt back on empty when used with firearms designed to lock back on GLOCK pattern magazine followers. It is recommended that you install a new OEM magazine release on Gen 1-3 GLOCK handguns to support the extra weight of the magazine. Gen 4 GLOCK handguns will require an aftermarket metal magazine release. Installation of a new recoil spring assembly to ensure reliable feeding is strongly recommended. Individual variations between firearms may result in an extra power recoil spring being required. Use of this D-50 GL9 in pistol caliber carbines (PCC) is not recommended, because the increased length of the feed tower will be partially unsupported in most pistol caliber magazine wells. This unsupported condition may cause premature wear on the feed tower magazine catch, and (in firearms which deviate from factory magazine well specifications) may result in improper round presentation and failures to feed. TECHNICAL SPECIFICATIONS More Information Caliber 9x19mm Parabellum Platform GLOCK Capacity 50 rounds Weight 17.3 oz. Compatibility All double-stack 9mm GLOCK handguns Other Specs It is recommended that you install a new OEM magazine release on Gen 1-3 GLOCK handguns to support the extra weight of the magazine Gen 4 GLOCK handguns will require an aftermarket metal magazine release Installation of a new recoil spring assembly to ensure reliable feeding is strongly recommended Individual variations between firearms may result in an extra power recoil spring being required   MADE IN THE USA

  Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip™. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Compatible accessories see under this article, accessories. FEATURES THE MS1® SLIDER Rapidly adjustable for length (shorter or longer) with new MS1 Slider Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand MULTIPLE CONFIGURATIONS Designed for easy rapid convertability between one-point and two-point mode Heavy-duty push-button Quick Disconnect sling swivel for one-point attachment Paraclip shackle allows for fast transition between one-point and two-point configuration Cross-Bolt Lock Bar in the Paraclip allows the user to optionally lock its lever closed for extra security   MAGPUL POLYMER AND INDESTRUCTIBLE HARDWARE Lightweight heavy-duty reinforced polymer hardware Steel Paraclip lever is case hardened and finished with a ferritic nitrocarburizing process for extreme resistance to wear and corrosion   SNAG-FREE, HIGH DURABILITY WEBBING Custom 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort No tails, loops, or other potential snag hazards Colored webbing has Near Infrared (NIR) treatment to reduce IR signature MADE IN THE USA

   Designed for use with all M-LOK compatible hand guards and forends, our 9-slot M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 9 usable slots and a max overall length of 4.1". MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option MIL-SPEC ANODIZED ALUMINUM Cammed T-nuts Recoil / impact mitigation lugs  

The TMAG 30 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56x45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. on the magazine body, the MagLevel® system provides positive verification without affecting the durability or reliability of the magazine. TECHNICAL SPECIFICATIONS More Information Caliber 5.56x45mm / .223 Remington / .300 BLK Platform AR15, M4, M16, SA-80 Capacity 30 rounds Weight 4.4 oz. Length, max 7.5 in. Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others MADE IN THE USA

   Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with the MS1 Sling for a dedicated two-point sling, or with an MS1 MS4 Adapter for a two to one-point convertible sling. MADE IN THE USA

  Compatible with all M1913 Picatinnyrail handguards as well as all Picatinnyrail adapters from a length of 76mm / (8-slots). For compatible adapters, see accessories under this article. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All mounting hardware included. Features Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) All mounting hardware included MADE IN THE USA

  Lightweight bipod, compatible with firearms with a sling stud or adapters with a sling stud. NOT compatible with Picatinnyrails or 1913 Rails. Compatible accessories see under this article, accessories. The MOE Bipod is the latest, lightest, and strongest bipod in the Magpul Bipod line. At 8oz total weight, it’s almost 40% lighter than some of our existing bipods. That decrease in weight doesn’t cost you when it comes to strength and reliability; our injection-molded, proprietary polymer legs won’t deform or break under pressure, providing a consistently stable platform to shoot from, shot after shot after shot. Designed to mount to the popular Uncle Mike's Sling Swivel Stud, the MOE bipod attaches and detaches quickly and easily thanks to its rapid-attach sling stud mounting system. The self-locating, stainless-steel clasps ensure perfect alignment when mounting, and the large ergonomic thumbwheel allows for a strong grip and easy tightening. The non-marring, over-molded saddle fits securely on most forends, providing ideal load distribution without leaving a mark on your rifle. Adding an optional low-profile sling stud on the rear of the mount retains the ability to mount a sling to the forend of the rifle. With its low stack height of 1.73” when folded, the MOE Bipod is streamlined and stays out of the way until it’s needed. The legs stow neatly forward and deploy without buttons or levers, snapping down and locking into position. The legs extend from 7 to 10 inches and slide and lock securely with the push of a button on seven, ½-inch spaced, locking detents. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces. They’re also easily removed with a roll pin punch should users choose to change feet, and the legs accept most Atlas-pattern bipod replaceable feet.   MADE IN THE USA

  The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk. A rolled toe and angled rubber butt-pad are optimized for use with body armor, and an ambidextrous QD sling swivel socket is included. A unique leaf-spring tension system provides a solid fit on mil-spec receiver extensions, with slightly less friction than the original SL. The MOE SL-S is the most intuitive, comfortable, and efficient storage stock available. WATERPROOF  STORAGE Two water-resistant battery storage tubes located on the left and right sides of the stock. Each tube will store up to two (2) CR123A lithium or AA batteries. Tubes are accessible from the rear in any stock position via hand-removable, o-ringed rubber plugs that are waterproof to 10 meters ENHANCED CHEEK WELD RUBBER BUTT-PAD Offers anti-slip surface and increases impact protection Sloping cheek weld combines a slim profile with user comfort LONG LASTING ADJUSTABILITY Premium chrome-silicon lock spring provides positive locking and long service life. Dual-side release latch provides easy adjustment while remaining snag-free. Internal anti-rattle leaf spring minimizes wobble on receiver extension tube COMPATIBILITY Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) SLING POINT VARIETY  Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Sling Mounts: Rear - Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops ROLLOVER TOE TO FIT YOUR GEAR Rollover on the toe allows for easier shoulder transitions and better fit when using body armor MAG653 MOE® SL-S™ Carbine Stock – Mil-Spec Installation Instructions TECHNICAL SPECIFICATIONS  Platform AR10, AR15, M4, M16, M110, SR25 Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others LOP, M4 Collapsed ~10.9 in. LOP, M4 Extended ~14.2 in. LOP Adjustment Range 3.3 in. Length, max 7.3 in. Weight 12.8 oz. Weight, w/ receiver extension 16.8 oz. Width, max 2.4 in. Other Specs * Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec.The MOE SL-S will only fit with the common Mil-Spec tube. MADE IN THE USA

  The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allow for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.  TECHNICAL SPECIFICATIONS  More Information Attachment 1913 Picatinny Rails Platform AR15, M4, M16 MADE IN THE USA

  Lightweight bipod, compatible with firearms with a sling stud or adapters with a sling stud. NOT compatible with Picatinnyrails or 1913 Rails. Compatible accessories see under this article, accessories. The MOE Bipod is the latest, lightest, and strongest bipod in the Magpul Bipod line. At 8oz total weight, it’s almost 40% lighter than some of our existing bipods. That decrease in weight doesn’t cost you when it comes to strength and reliability; our injection-molded, proprietary polymer legs won’t deform or break under pressure, providing a consistently stable platform to shoot from, shot after shot after shot. Designed to mount to the popular Uncle Mike's Sling Swivel Stud, the MOE bipod attaches and detaches quickly and easily thanks to its rapid-attach sling stud mounting system. The self-locating, stainless-steel clasps ensure perfect alignment when mounting, and the large ergonomic thumbwheel allows for a strong grip and easy tightening. The non-marring, over-molded saddle fits securely on most forends, providing ideal load distribution without leaving a mark on your rifle. Adding an optional low-profile sling stud on the rear of the mount retains the ability to mount a sling to the forend of the rifle. With its low stack height of 1.73” when folded, the MOE Bipod is streamlined and stays out of the way until it’s needed. The legs stow neatly forward and deploy without buttons or levers, snapping down and locking into position. The legs extend from 7 to 10 inches and slide and lock securely with the push of a button on seven, ½-inch spaced, locking detents. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces. They’re also easily removed with a roll pin punch should users choose to change feet, and the legs accept most Atlas-pattern bipod replaceable feet.   MADE IN THE USA

   One of the best foregrips on the market, compatible with all Picatinny rails, you can carry out professional installation from just 4 slots.  For compatible accessories, see accessories under this article. Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. HIGH STRENGTH POLYMER CONSTRUCTION Light weight combined with proven Magpul polymer strength RELIABLE ATTACHMENT TO 1913 PICATINNY RAILS LOW PROFILE DESIGN ERGONOMICALLY DESIGNED Fully adaptable to both the more traditional vertical grip or the thumb grip method  AGGRESSIVE TEXTURE FOR POSITIVE WEAPON CONTROL Our TSP design provides an enhanced gripping surface   Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.  MADE IN THE USA

  Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts. Compatible accessories see under this article, accessories. The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.  Made in U.S.A. and 100% Berry Amendment compliant. RUGGED POLYMER AND MANY OPTIONS Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket Designed for easy, rapid convertibility between one-point and two-point mode SIMPLE, STRONG, SECURE  Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment MADE IN THE USA

 Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights and vertical grips. Injection molded from a proprietary reinforced composite for enhanced strength and durability, our M-LOK Polymer Rail Sections are light weight and feature beveled ends to reduce snagging and eliminate sharp corners and edges. Includes all hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends. Includes 5 usable slots and a maximum overall length of 2.5 in. DIRECTLY MOUNTS TO M-LOK COMPATIBLE SYSTEMS Capable of multi-directional mounting Intermediate spacing option RUGGED REINFORCED POLYMER CONSTRUCTION Cammed T-Nuts Built in recoil/impact mitigation lugs   RESOURCES M-LOK FAQs M-LOK TIPS MADE IN THE USA

  The Enhanced Ejection Port Cover is a drop-in upgrade designed to provide an improved installation process, physical strength, and corrosion resistance over the standard USGI ejection port cover. Compatible with AR15/M16/M4 MIL-SPEC AR15 upper receivers that accept USGI ejection port covers. Traditional stamped-steel ejection ports are malleable, prone to corrosion, and require tools to install. The Enhanced Ejection Port Cover snaps into place easily without having to remove your hand guard or barrel nut, wind any loose springs, or adjust small e-clips. Constructed of impact-resistant injection molded polymer, it is corrosion resistant and will not bend or deform from impacts. EASIER THAN… EASY Installs easily in seconds Direct replacement for USGI ejection port cover MORE RUGGED THAN METAL PORT COVERS Durable, injection-molded polymer construction Corrosion resistant components Will not bend or deform from impacts   TECHNICAL SPECIFICATIONS  More Information Platform AR15, M4, M16 Other Specs Compatible with Mil-spec AR15 upper receivers that accept USGI ejection port covers MADE IN THE USA

  Only compatibel to MAGPUL GEN M3 Magazines NOT compatibel to MAGPUL GEN M2 or other  Magazines    The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger Plate. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes. MAG564 PMAG Ranger Plate™ – LR/SR GEN M3, 3 Pack Installation Instructions   TECHNICAL SPECIFICATIONS More Information Platform AR10, M110, SR25 Compatibility 7.62x51 LR/SR GEN M3 PMAGs Other Specs NOTE: This Ranger Plate is a dedicated fit for all 7.62x51 LR/SR GEN M3 PMAGS. Will NOT fit the older PMAG 20LR magazine, any 5.56x45 or 7.62x39 PMAGS, or any metal magazine.   MADE IN THE USA

  Compatible with all M1913 Picatinnyrail handguards as well as all Picatinnyrail adapters from a length of 76mm / (8-slots). For compatible adapters, see accessories under this article.   Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All mounting hardware included. Features Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) All mounting hardware included MADE IN THE USA

  A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip provides a welcome addition to the iconic AK platform. AGGRESSIVE TSP TEXTURE Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage. MAG523 MOE AK Grip – AK47/AK74 Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AK / AKM Grip Angle 24 degrees Thickness, max 1.2 in. Weight, w/ hardware 2.9 oz. Other Specs Height, max: 4.1 in. *NOTE: Due to the wide range of tolerances of AK receivers, some custom fitting of the grip may be necessary.  MADE IN THE USA

  Designed to considerably improve the speed and efficiency of the AR15/M4 bolt catch, the B.A.D. (Battery Assist Device) Lever quickly addresses reloading and malfunction clearance shortcomings of the platform by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control / ready position with the right-hand trigger finger.Designed around Mil-spec forged upper and lower receivers*, the anodized aluminum B.A.D. Lever attaches to the standard AR15/M4 bolt catch without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M4 manual of arms. All mounting hardware included. MADE FROM MIL-SPEC ANODIZED ALUMINUM Machined from durable billet 6061-T6 aluminum Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw per MIL-DTL-16232G Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included) ATTACHES TO THE AR15/M16 BOLT-RELEASE WITHOUT PERMANENT WEAPON MODIFICATION Attaches to the existing bolt catch paddle via one screw COMPATIBLE WITH MIL-SPEC FORGED UPPERS AND LOWERS* Thin, anti-snag profile and textured surface still allows for traditional manipulation of the bolt catch while maintaining unobstructed access to the trigger  MAG980 B.A.D. Lever - Battery Assist Device – AR15/M4 Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AR15, M4, M16 Other Specs *NOTE: Not compatible with 7.62x51 (.308 Winchester) firearms as well as most AR15 billet or polymer lower and upper receivers due to their larger and/or non-standard dimensions. MADE IN USA

  Compatible with all SA (SHORT ACTION) Bolt Action Rifles with AICS (Accuracy International Chassis Systems) Magazine Interface in Caliber .308 WIN, 6.5 Creedmoor, 7mm-08 Remington, .260 Remington and .243 WIN NOT compatible for other Calibers or Semi-Automatic Rifles  Featuring GEN M3® technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 7.62 AICS sets a new standard for bolt action magazines. MADE IN USA

  The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions. ALLOWS A WIDE RANGE OF MOTION DURABLE STEEL CONSTRUCTION Case hardened and finished with Melonite for extreme resistance to wear and corrosion WORKS WITH MIL-SPEC AND COMM-SPEC CARBINE RECEIVER EXTENSIONS ADJUSTS TO YOUR NEEDS Accepts any push-button QD sling swivel as well as the Magpul QDM MADE IN THE USA

 The Magpul CTR (Compact/Type Restricted) - Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3" thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Sling Mounts: Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs MADE IN USA  

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights and vertical grips. Injection molded from a proprietary reinforced composite for enhanced strength and durability, our M-LOK Polymer Rail Sections are light weight and feature beveled ends to reduce snagging and eliminate sharp corners and edges. Includes all hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends. Includes 9 usable slots and a maximum overall length of 4.1 in. Made in the USA. DIRECTLY MOUNTS TO M-LOK COMPATIBLE SYSTEMS Capable of multi-directional mounting Intermediate spacing option RUGGED REINFORCED POLYMER CONSTRUCTION Cammed T-Nuts Built in recoil/impact mitigation lugs MADE IN THE USA

  Compatible with all SA (SHORT ACTION) Bolt Action Rifles with AICS (Accuracy International Chassis Systems) Magazine Interface in Caliber .308 WIN, 6.5 Creedmoor, 7mm-08 Remington, .260 Remington and .243 WIN NOT compatible for other Calibers or Semi-Automatic Rifles  Featuring GEN M3® technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 7.62 AICS sets a new standard for bolt action magazines. MADE IN USA

  The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. It includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip. MADE IN THE USA

10 round Magazine for Glock Pistols and Glock Clones. Also compatible with AR-15 in caliber 9X19, which accept GLOCK® magazines.  The Magpul PMAG 10 GL9 - Glock 17 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 10 GL9 - Glock 17 is compatible with all full-size 9mm Glock handguns and compact and sub-compact variants with some protrusion below the grip. MADE IN THE USA

  The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Kompatible MIL-SPEC Buffer Tubes sowie Zubehör siehe unter diesen Artikel, Zubehör.  With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting. HEIGHT & CANT ADJUSTABLE NON-SLIP RUBBER BUTT-PAD Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height. Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG     TOOL-LESS COMB HEIGHT AND LENGTH OF PULL ADJUSTMENT   Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents. Steel adjustment shafts finished with Melonite® for wear and corrosion resistance   SLING MOUNT OPTIONS Front/Rear - rotation-limited QD sling swivel mounts (swivels not included) Rear - 1.25" aluminum sling loop (left-right reversible)     BOTTOM M-LOK SLOTS FOR MONOPOD/ACCESSORY MOUNTING Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod MADE IN THE USA Subject to printing errors and changes. Our product pictures and item descriptions are protected by copyright. Any further use without our consent constitutes a copyright infringement in accordance with § 86 of the Copyright Act.

  The Magpul BTR is an AR arm brace designed to improve the single-handed employment of large-format pistols. The BTR utilizes Magpul design and engineering to offer a stabilizing accessory with a robust feature set and trusted Magpul quality.  With classic Magpul aesthetics, the BTR is compatible with Mil-Spec carbine receiver extensions and employs a simplified, durable, and easy to use adjustment mechanism. An integrated QD cup and M-LOK compatible slot provide ambidextrous sling mounting options and enable stabilizing sling tension to be applied, drastically increasing single-handed control of the firearm. With a straight-forward design and Magpul innovation, the BTR is a simple solution to improving your AR pistol. IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firing M-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment MAG1079 BTR Arm Brace Installation Instructions BTR Arm Brace FAQ  TECHNICAL SPECIFICATIONS  More Information Platform AR15, M4 Compatibility Mil-spec sized carbine receiver extension equipped AR Pistols. Not compatible with proprietary, pistol, or commercial-spec receiver extensions. All ATF, NFA, state and local rules and laws apply, where applicable. Other Specs Legal Disclaimer: This product is designed and intended to be employed for lawful uses in accordance with all applicable laws and must be assembled into a legal configuration. ATF has ruled that attaching stabilizing braces with certain features will not make a firearm NFA controlled. This product conforms to this ATF precedent. As of December 10, 2019, ATF is no longer issuing classification letters for firearm accessories, including stabilizing braces. This product is designed and intended to serve only as a forearm brace for one-handed firing of a pistol. It is not intended to be fired from the shoulder. Any redesign or reconfiguration of this product may render the attached firearm NFA controlled. The user is exclusively responsible for determining the correct application of state and federal law based on the unique configuration of each firearm. MADE IN THE USA

The Magpul PMAG D-50 is a rugged, lightweight, and reliable 50-round polymer drum magazine designed for 7.62x51 NATO/.308 Winchester ammunition for SR25/M110 pattern rifles. It’s capable of using longer-than-SAAMI-spec match ammunition, up to 2.830” OAL, such as M118LR. Engineered to the same exacting standards as the famous Magpul PMAG and PMAG D-60® drum magazines, the D-50 continues the PMAG tradition of high-capacity performance and dependability.  In addition, the D-50 brings GEN M3 features, which means enhanced strength, durability, and reliability. The Magpul PMAG D-50 shares its DNA with the legendary Magpul PMAG GEN M3, which includes next-generation impact and crush-resistant polymer construction and the ability to seat fully loaded on a closed bolt. Robust stainless-steel internals withstand corrosion and long-term storage while loaded with no loss of function, spring fatigue, or reliability concerns. A slip-on semi-rigid dust cover prevents grit and debris intrusion during storage and transport. Ease of use is at the forefront of the D-50 design. A ratcheting loading lever removes spring tension, making the D-50 easily loadable by hand. An anti-glare translucent window on the rear of the drum makes for quick positive visual indication of remaining ammunition. Additionally, the D-50 can be disassembled quickly with a simple flat blade screwdriver, and a has a dot matrix pattern that allows for easy marking and identification. RUGGED, DURABLE, & RELIABLE Next-generation impact and crush-resistant polymer construction Long-lasting, corrosion-resistant, stainless-steel internals EASY TO LOAD AND USE Seats fully loaded on a closed bolt Ratcheting loading lever makes it easy to load LIGHTWEIGHT AND AFFORDABLE At approximately 1.5 lbs. empty, and 4.5 lbs. loaded, the Magpul D-50 is one of the lightest 50-round 7.62x51/.308 drums available and is priced well below current competition MAG993 PMAG D-50® LR/SR GEN M3® Usage and Maintenance Instructions How to use the Magpul Dot Matrix TECHNICAL SPECIFICATIONS Caliber 7.62x51mm / .308 Winchester Platform AR10, M110, SR25 Capacity 50 Weight 1.7 lbs. Height, max 8.34 in. Length, max 4.35 in. Compatibility The Magpul D-50 was designed specifically for 7.62x51 NATO/.308 Winchester ammunition. Use with other calibers such as .260 Remington or 6.5 Creedmoor is not recommended.  Other Specs Width, max: 4.64 in. NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GIi design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LARS, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91 / G3 patterned magazines. MADE IN USA

The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Front Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 Front Sight sits at standard AR-height when deployed and includes tool-less elevation adjustment of a dual width enhanced front post similar to the MBUS Pro. MBUS 3 Sights will be available in Black, Flat Dark Earth FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Tool-less elevation adjustment and dual width enhanced front sight post, similar to MBUS Pro 0.47” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction, smaller size provides light weight and resists operational abuse MAG1166 MBUS 3 Sight – Front Installation Instructions MBUS 3 Sights Install Video TECHNICAL SPECIFICATIONS More Information Position Front Height above rail, stowed ~0.47 in. Platform AR10, AR15, M4, M16, M110, SR25 Weight, w/ hardware 25 g Other Specs ELEVATION ADJUSTMENT ~1 MOA (1.131”/100 m) per click with a 14.5" sight radius~0.7 MOA (0.820”/100 m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed forend on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards. MADE IN THE USA

The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Rear Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 Rear Sight sits at standard AR-height when deployed and includes a windage adjustable, rapid-select aperture system. MBUS 3 Sights will be available in Black, Flat Dark Earth FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Ambidextrous push-button deployment and rapid-select rear aperture system 0.55” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction, smaller size provides light weight and resists operational abuse MAG1167 MBUS 3 Sight – Rear Installation Instructions MBUS 3 Sights Install Video TECHNICAL SPECIFICATIONS More Information Position Rear Height above rail, stowed ~0.55 in. Platform AR10, AR15, M4, M16, M110, SR25 Weight, w/ hardware 30 g Other Specs Center of aperture to top of rail: 1.41 in. WINDAGE ADJUSTMENT ~0.5 MOA (0.606”/100m) per click with a 14.5" sight radius~0.4 MOA (0.439”/100 m) per click with a 20" sight radius MADE IN THE USA

  Only compatibel to MAGPUL GEN M3 Magazines NOT compatibel to MAGPUL GEN M2 or other  Magazines    The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger Plate. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.   ERGONOMIC  Designed to improve ergonomics, adding positive control while protecting against impacts A BETTER FLOORPLATE The Ranger Plate brings many improvements to the standard floor plates found on AR/M4 GEN M3 PMAGS LEGENDARY MAGPUL POLYMER Designed to be as durable as the PMAG it's going on  MAG561 PMAG Ranger Plate – AR/M4 GEN M3, 3 Pack Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AR15, M4, M16 Compatibility 5.56x45 AR/M4 GEN M3 PMAG magazines Other Specs NOTE: This Ranger Plate is a dedicated fit for 5.56x45 AR/M4 GEN M3 PMAGs. Will NOT fit PMAG GEN M2 MOE magazines, EMAG, PMAG 30G MagLevel, 7.62x39 PMAGS, 7.62x51 PMAGS, or any metal magazine.

  Lightweight bipod, compatible with all 1913 Picatinny rails as well as all 1913 Picatinny rails. The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

 The Magpul BSL is an AR arm brace designed to improve the single-handed employment of large-format pistols. The BSL utilizes Magpul design and engineering to offer a stabilizing accessory with a robust feature set and trusted Magpul quality.  With classic Magpul aesthetics, the BSL is compatible with Mil-Spec carbine receiver extensions and employs a simplified, durable, and easy to use adjustment mechanism. An integrated QD cup and two M-LOK compatible slots provide ambidextrous sling mounting options and enable stabilizing sling tension to be applied, drastically increasing single-handed control of the firearm. With a straight-forward design and Magpul innovation, the BSL is a simple solution to improving your AR pistol. IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firing M-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment MAG1143 BSL Arm Brace Installation Instructions BSL Arm Brace FAQ TECHNICAL SPECIFICATIONS  More Information Platform AR15, M4 Compatibility Mil-spec sized carbine receiver extension equipped AR Pistols. Not compatible with proprietary, pistol, or commercial-spec receiver extensions. All ATF, NFA, state and local rules and laws apply, where applicable. Other Specs Legal Disclaimer: This product is designed and intended to be employed for lawful uses in accordance with all applicable laws and must be assembled into a legal configuration. ATF has ruled that attaching stabilizing braces with certain features will not make a firearm NFA controlled. This product conforms to this ATF precedent. As of December 10, 2019, ATF is no longer issuing classification letters for firearm accessories, including stabilizing braces. This product is designed and intended to serve only as a forearm brace for one-handed firing of a pistol. It is not intended to be fired from the shoulder. Any redesign or reconfiguration of this product may render the attached firearm NFA controlled. The user is exclusively responsible for determining the correct application of state and federal law based on the unique configuration of each firearm. MADE IN THE USA

  The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Our Glock magazines come with many of our other platform PMAG features, including a high visibility controlled-tilt follower, a stainless steel spring, a floorplate that's easily removable for cleaning, a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. The PMAG 17 GL 9 drops free whether it's loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. Magazine drops free loaded or unloaded. MADE IN THE USA

  The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. HIGH STRENGTH POLYMER VERTICAL GRIP MOUNTS DIRECTLY TO  M-LOK     LOW PROFILE AND LIGHT WEIGHT MAGPUL TSP TEXTURE For positive control in all environments     DESIGNED TO IMPROVE ERGONOMICS AND WEAPON CONTROL MADE IN THE USA

  The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.  All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required. Compatible accessories, see under this article, accessories. M-LOK Description and FAQs M-LOK Installation Tips MAG606 M-LOK QD Sling Mount Installation Instructions TECHNICAL SPECIFICATIONS More Information Weight 0.5 oz. Other Specs Length, Max: 1.3 in. Width, Max: 0.6 in. Height, from surface of Hand Guard: 0.4 in. MADE IN THE USA

  Quickly reconfigurable between one-point and two-point operation, the Magpul® MS4 QDM Sling enhances the proven MS4 Dual QD Sling Gen2 by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical push-button swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but also maintains compatibility with the standard QD sling cup interface found on many handguards, lower receivers, receiver end plates and buttstocks. Based on the streamlined two-point MS1® Sling adjustment system, the Magpul MS4 QDM Sling retains the low-profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless adjustment. Webbing length is optimized for a comfortable fit with all body types and body armor configurations. The Magpul MS4 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant. RAPID CONVERSION Factory-installed Magpul QDMs allow rapid conversion between one and two-point configurations Swivels and D-Ring are constructed of Melonite® finished steel for strength and extreme resistance to wear and corrosion RUGGED AND LIGHT WEIGHT POLYMER Light weight yet durable slider and buckle hardware made of reinforced polymer SNAG-FREE, HIGH DURABILITY WEBBING Proprietary weave, 1-1/4” wide nylon webbing is strong and abrasion-resistant while tubular construction provides anti-chafing user comfort Colored webbing has Near Infrared (NIR) treatment to reduce IR signature ADJUSTS TO YOUR NEEDS Secure and rapid length adjustment with MS1 slider No tails, loops, or other potential snag hazards MADE IN THE USA

   Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, our M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 3 usable slots with a max overall length of 1.6". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option MIL-SPEC ANODIZED ALUMINUM Cammed T-nuts Recoil / impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips   TECHNICAL SPECIFICATIONS Attachment M-LOK Slots MADE IN THE USA

  The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. The BEV Block mounts securely in a vise and provides support for both billet and forged upper receivers. It engages the barrel extension with solid steel lugs and a full length support shank to prevent flexing. Steel hardness is optimized for durability, yet won't damage the barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect the aluminum receiver. An o-ring post uses the bolt carrier for additional stability and the included pin keeps the upper in the proper position.  The BEV can also be turned over and used as a mag well vise block to support the lower receiver for maintenance or other operational needs. PROVIDES SUPPORT FOR AR15/M4 UPPERS AND LOWERS Solidly engages barrel extension with steel lugs Full-length steel support shank Body is constructed of the same high-quality polymer as other Magpul products MAG536 BEV™ Block – AR15/M4 Usage Instructions TECHNICAL SPECIFICATIONS More Information Platform AR15, M4, M16 Weight 11.2 oz. MADE IN THE USA

  The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.   *NOTE: This grip will function properly with 7.62 NATO AR10 / SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MAG415 MOE Grip – AR15/M4 Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degrees Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Weight, w/ hardware 2.8 oz. Other Specs *NOTE: This grip will function properly with 7.62 NATO AR10 / SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip™. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. FEATURES THE MS1® SLIDER Rapidly adjustable for length (shorter or longer) with new MS1 Slider Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand MULTIPLE CONFIGURATIONS Designed for easy rapid convertability between one-point and two-point mode Heavy-duty push-button Quick Disconnect sling swivel for one-point attachment Paraclip shackle allows for fast transition between one-point and two-point configuration Cross-Bolt Lock Bar in the Paraclip allows the user to optionally lock its lever closed for extra security   MAGPUL POLYMER AND INDESTRUCTIBLE HARDWARE Lightweight heavy-duty reinforced polymer hardware Steel Paraclip lever is case hardened and finished with a ferritic nitrocarburizing process for extreme resistance to wear and corrosion   SNAG-FREE, HIGH DURABILITY WEBBING Custom 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort No tails, loops, or other potential snag hazards Colored webbing has Near Infrared (NIR) treatment to reduce IR signature   MADE IN THE USA

  Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.  The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.  Made in U.S.A. and 100% Berry Amendment compliant. RUGGED POLYMER AND MANY OPTIONS Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket Designed for easy, rapid convertibility between one-point and two-point mode SIMPLE, STRONG, SECURE  Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment MADE IN THE USA

  Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.   The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.  Made in U.S.A. and 100% Berry Amendment compliant. RUGGED POLYMER AND MANY OPTIONS Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket Designed for easy, rapid convertibility between one-point and two-point mode    SIMPLE, STRONG, SECURE  Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment   MADE IN THE USA

   The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle. Two sizes are available. This TYPE 2 Kit (MAG521) uses taller back-straps for optimized fit with certain 7.62x51 receivers*. The TYPE 1 Kit (MAG520) is compatible with most AR15 / M4s, as well as AR10-type receivers utilizing that standard. All mounting hardware is included.  MAG521 MIAD GEN 1.1 Grip Kit – TYPE 2 Installation Instructions TECHNICAL SPECIFICATIONS Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degree Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Other Specs * NOTE: This TYPE 2 Kit uses taller backstraps for optimized fit with certain 7.62x51 receivers such as the Armalite AR-10A/B/T, DPMS LR308, KAC SR25, LaRue OBR, LMT .308 MWS, Palmetto PA10, and S&W M&P10.Some 7.62x51 variants such as the Aero Precision M5 308, CMMG Mk3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716 will require the TYPE 1 Kit. In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  Internal core unit for the MIAD®, MOE®, MOE+®, MOE-K2®, and MOE® AK Grips designed to hold two (2) AA type batteries in a self contained, water-resistant unit. Included internal spacer provides rattle-free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights). Rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb. TECHNICAL SPECIFICATIONS   Platform AR10, AR15, M4, M16, M110, SR25

   The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle. Two sizes are available. This TYPE 2 Kit (MAG521) uses taller back-straps for optimized fit with certain 7.62x51 receivers*. The TYPE 1 Kit (MAG520) is compatible with most AR15 / M4s, as well as AR10-type receivers utilizing that standard. All mounting hardware is included.  MAG521 MIAD GEN 1.1 Grip Kit – TYPE 2 Installation Instructions TECHNICAL SPECIFICATIONS Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degree Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Other Specs * NOTE: This TYPE 2 Kit uses taller backstraps for optimized fit with certain 7.62x51 receivers such as the Armalite AR-10A/B/T, DPMS LR308, KAC SR25, LaRue OBR, LMT .308 MWS, Palmetto PA10, and S&W M&P10.Some 7.62x51 variants such as the Aero Precision M5 308, CMMG Mk3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716 will require the TYPE 1 Kit. In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.   *NOTE: This grip will function properly with 7.62 NATO AR10 / SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MAG415 MOE Grip – AR15/M4 Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degrees Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Weight, w/ hardware 2.8 oz. Other Specs *NOTE: This grip will function properly with 7.62 NATO AR10 / SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility / Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman's loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment. MAG482 UBR® GEN2 Collapsible Stock Installation Instructions TECHNICAL SPECIFICATIONS More Information Platform AR10, AR15, M4, M16, M110, SR25 LOP, M4 Collapsed ~11.8 in. LOP, M4 Extended ~15.3 in. LOP Adjustment Range 3.5 in. Length 8.5-12.0 in. Weight, w/ receiver extension 21.2 oz. Width, max 1.7 in. Other Specs **Specifications based on factory configuration  *NOTE: The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, and all mounting hardware. A carbine buffer and spring (M4 or SR-25 length) or A5 buffer and spring are required for use with the UBR and are not included.  MADE IN THE USA

  The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.  With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. RUBBER OVERMOLD ON REINFORCED POLYMER CONSTRUCTION All mounting hardware included. MAG416 MOE+ Grip – AR15/M4 Installation Instructions TECHNICAL SPECIFICATIONS Platform AR10, AR15, M4, M16, M110, SR25 Grip Angle 25 degrees Height, receiver to bottom 4.0 in. Thickness, max 1.2 in. Weight 3.4 oz. Other Specs *NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. MADE IN THE USA

  Leichtgewichtiges Bipod, kompatibel zu allen Schusswaffen mit Riemenösenaufnahme oder Adaptern mit Riemenösenaufnahme. The Magpul Bipod – Sling Stud QD offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just 13 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

  Designed for use with larger hands, the K2-XL Grip is similar to our MOE-K2® Grip – AR15/M4 but it's nearly 25% bigger. A drop in upgrade for the AR15/M4, it offers a more vertical grip angle, improving comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The larger size of the grip also allows proper finger placement in precision shooting, helping improve accuracy. With an aggressive TSP (Trapezoidal Surface Projections) texture for positive weapon control, front and rear serrations for traction, and a proprietary XL grip cap with an oil bottle grip core, the K2-XL brings modern styling and ergonomics to the AR platform in a larger size. XL grip cap, oil bottle grip core, and mounting hardware included. Other Magpul grip cores will not fit with the K2-XL grip cap BIGGER SIZE SUPPORTS LARGER GRIP NEEDS Approximately 25% larger than MOE-K2 Grip More vertical angle provides optimal hand position for modern shooting techniques BEAVERTAIL BACKSTRAP FOR ENHANCED ERGONOMICS Design supports proper trigger finger placement STORAGE CORE CAPABILITY ACCEPTS PROPRIETARY XL GRIP CAP AND OIL BOTTLE GRIP CORE  MADE IN THE USA

 The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Made in U.S.A. FEATURES Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON AR15/M4 applications Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments Sling Mounts Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE. MOE Carbine Stock, Mil-Spec Weight: 8.0 oz. Weight, w/receiver extension: 12.0 oz. Length, max: 6.9 in. LOP Adjustment Range: 3.3 in. LOP, M4 Collapsed: ~10.5 in. LOP, M4 Extended: ~13.8 in. * Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

    A five pack of our 5.56x45 (.223 Remington) Dummy Rounds made from our proprietary hard polymer. They are useful for gun handling, reloading and malfunction drills, as well as for analyzing shooting procedures.  MADE IN THE USA

Lightweight but incredibly strong, our PMAG D-50 GL9 - PCC is a highly-reliable, 9x19mm Parabellum, 50-round drum magazine for many large-format pistols and pistol caliber carbines that feed from GLOCK® pattern magazines.* The Magpul D-50 GL9 – PCC boasts many of the proven features of its 5.56 and 7.62 predecessors, the PMAG D-60® AR/M4 and PMAG D-50® LR/SR GEN M3®, while providing the user with a similar magazine capacity increase. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. To keep track of your available firepower, we’ve included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller. Easily disassembled for cleaning and featuring an innovative bolt hold-open feature, the D-50 GL9 – PCC reliably locks the bolt back on empty when used with firearms designed to lock back on GLOCK pattern magazine followers. RUGGED CONSTRUCTION Next-generation impact and crush-resistant polymer construction Robust stainless-steel internals that withstand corrosion and long-term loaded storage with no loss of function, spring fatigue, or reliability concerns EASY TO LOAD AND OPERATE Ratcheting loading lever for easy loading Simple disassembly and reassembly DEPENDABLE VISUAL FEATURES High-visibility follower and rounds-remaining window Paint pen dot matrix   TECHNICAL SPECIFICATIONS More Information Caliber 9x19mm Parabellum Platform Other Capacity 50 rounds Weight 16 oz. Compatibility Most 9x19mm Parabellum pistol caliber carbines and large-format pistols with GLOCK-pattern magazine wells* Other Specs *NOTE: Not compatible with any GLOCK Handguns. NO EXPORT. NO SHIPPING TO ENDUSER. Due to magazine well geometry, the GL9 – PCC will not seat in the B&T GHM9. Also, the GL9 – PCC will not seat in the Kel-Tec Sub-2000, however the PMAG D-50® GL9® – GLOCK® (MAG1033) will seat correctly. MADE IN USA

  Designed for use with larger hands, the K2-XL Grip is similar to our MOE-K2® Grip – AR15/M4 but it's nearly 25% bigger. A drop in upgrade for the AR15/M4, it offers a more vertical grip angle, improving comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The larger size of the grip also allows proper finger placement in precision shooting, helping improve accuracy. With an aggressive TSP (Trapezoidal Surface Projections) texture for positive weapon control, front and rear serrations for traction, and a proprietary XL grip cap with an oil bottle grip core, the K2-XL brings modern styling and ergonomics to the AR platform in a larger size. XL grip cap, oil bottle grip core, and mounting hardware included. Other Magpul grip cores will not fit with the K2-XL grip cap. BIGGER SIZE SUPPORTS LARGER GRIP NEEDS Approximately 25% larger than MOE-K2 Grip More vertical angle provides optimal hand position for modern shooting techniques BEAVERTAIL BACKSTRAP FOR ENHANCED ERGONOMICS Design supports proper trigger finger placement STORAGE CORE CAPABILITY ACCEPTS PROPRIETARY XL GRIP CAP AND OIL BOTTLE GRIP CORE  MADE IN THE USA  

The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Made in U.S.A. FEATURES Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON AR15/M4 applications Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments Sling Mounts Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE. MOE Carbine Stock, Mil-Spec Weight: 8.0 oz. Weight, w/receiver extension: 12.0 oz. Length, max: 6.9 in. LOP Adjustment Range: 3.3 in. LOP, M4 Collapsed: ~10.5 in. LOP, M4 Extended: ~13.8 in. * Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

  The next-generation PMAG 10 GEN M3 is a 10-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with an expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability. The PMAG 10 provides next-generation performance for those needing lower profile magazines.  While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.The PMAG 10 GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower for reliable feeding, and an easy to disassemble flared floorplate to aid extraction and handling of the magazine while providing improved drop protection. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. MADE IN THE USA

  When installed on the base of a 5.56x45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines TECHNICAL SPECIFICATIONS  Platform: AR15, M4, M16 Compatibility: Most aluminum, steel, and polymer 5.56 x 45 magazines  MADE IN THE USA

Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines.* The PMAG D-50 MP boasts many of the proven features of our other 9mm drums such as the PMAG D-50® EV9™ – CZ Scorpion® EVO 3. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. To keep track of your available firepower, we’ve included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller.  And like our other drum magazines, the PMAG D-50 MP is easily disassembled for cleaning and maintenance. RELIABLE AND DURABLE CONSTRUCTION Next-generation impact and crush resistant polymer construction All components are corrosion resistant ADVANCED FEATURES Will seat fully loaded on a closed bolt Designed to be left loaded for long term storage with no degradation of function TECHNICAL SPECIFICATIONS More Information Caliber 9x19mm Parabellum Platform HK94, MP5 Capacity 50 rounds Weight 16 oz. Compatibility HK94/MP5 pattern large-format pistols and pistol caliber carbines* Other Specs *NOTE: NO EXPORT. NO SHIPPING TO ENDUSER.  Integral vertical grip hand guards such as those on the MP5K may interfere with seating the PMAG D-50 MP. On modular hand guards with removable vertical grips, interference may be eliminated by shifting the vertical grip toward the muzzle.     MADE IN THE USA

  The MOE (Magpul Original Equipment) Trigger Guard is an enhanced polymer drop in replacement for the AR15 / M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.  All mounting hardware included. 

  The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well. SPRING-LOADED FLIP UP SIGHT Easily activated from either side or by pressing the top Protective wings shield the spring-locking A2 front sight post IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction provides light weight and resists operational abuse DETENT AND SPRING PRESSURE KEEPS SIGHT ERECT Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. CLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS Compatible with most MIL-STD-1913 Picatinny / STANAG 4694-railed hand guards* and provides the same height-over-bore as standard A2 irons   RESOURCES MAG247 MBUS® Sight – Front Installation Instructions   MADE IN THE USA

  When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used with special warfare units worldwide. IMPROVED SPEED AND HANDLING Designed for use during high stress, tactical magazine changes. Improves speed of reload and control HIGHLY COMPATIBLE The Magpul fits most aluminum, steel, and polymer magazines TECHNICAL SPECIFICATIONS  Platform: AR10, M110, SR25 Compatibility: Most aluminum, steel, and polymer 7.62 /.308 magazines   MADE IN THE USA

 Der MAGPUL MOE SL-K Drop-In Einsatzschaft für AR-15 / M16-Karabiner wurde entwickelt um den Strapazen des modernen Schlachtfelds standzuhalten. Der schlanke Schaft verfügt über eine schräge Wange für einen festen Sitz und verbessert den Benutzerkomfort. Der beidseitige Entriegelungshebel ermöglicht einfache Einstellungen und ist so eingestellt, dass sie nicht mit der Kleidung daran hängenbleiben. Erstklassige Chrom-Silikon-Verriegelungsfeder gewährleistet eine lange Lebensdauer des Buffer-Tube und eine lange Lebensdauer des Schafts. Die interne anti-rattle-Funktion sorgt für einen festen Sitz, um ein Wackeln am Buffer-Tube zu minimieren. Der SL-K Schubschaft von MAGPUL ist der perfekte Einsatzschaft für PCC, IPSC, auch bestens geeignet in Kombination mit Ausrüstung und Plattenträgern. A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.  A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*. 100 % Made in U.S.A. FEATURES •Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others •Sloping cheek weld combines a slim profile with user comfort •Dual-side release latch provides easy adjustment while remaining anti-snag •Premium chrome-silicon lock spring provides positive locking and long service life •Compact rubber butt-pad offers an anti-slip surface and increases impact protection •Rollover on the toe allows for easier shoulder transitions and better fit when using body armor •Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments •1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)   NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube. SPECIFICATIONS** MOE SL-K Carbine Stock, Mil-Spec •Weight: 7.9 oz. •Weight, w/receiver extension: 11.9 oz. •Length, max: 6.5 in. •Height, max: 4.2 in. •LOP Adjustment Range: 3.3 in. •LOP, M4 Collapsed: ~10.3 in. •LOP, M4 Extended: ~13.6 in. * Performance dependant on the host receiver extension's dimensional tolerances.  ** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. MADE IN THE USA

    The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.  MADE IN THE USA

  Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. MADE IN THE USA

  Designed to military standards, the PRS Lite is intended for Mil-Spec USGI carbine/SR25 collapsible/A5 extension tubes* for .223 and .308 receiver-pattern rifles.   Kompatible MIL-SPEC Buffer Tubes sowie Zubehör siehe unter diesen Artikel, Zubehör.  The PRS Lite provides much of the same adjustability and many features of our PRS GEN3 Precision-Adjustable Stock, with the added benefits of reduced weight and a price that’s almost half of its fully featured counterpart. At 10 ounces lighter than the PRS GEN3, it provides an optimized shooter interface with 0.8” of comb height and 1.4” of LOP adjustments. The low-profile rubber butt-pad is adjustable for height and cant and provides an extremely stable interface with the shooter’s shoulder. There are multiple attachment options for slings, including an ambidextrous 1.25” footman’s loop, a reversible QD sling swivel cup, and space for another optional QD sling swivel cup. MADE IN THE USA

  The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well. SPRING-LOADED FLIP UP SIGHT Easily activated from either side or by pressing the top Protective wings shield the spring-locking A2 front sight post IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction provides light weight and resists operational abuse DETENT AND SPRING PRESSURE KEEPS SIGHT ERECT Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. CLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS Compatible with most MIL-STD-1913 Picatinny / STANAG 4694-railed hand guards* and provides the same height-over-bore as standard A2 irons   RESOURCES MAG247 MBUS® Sight – Front Installation Instructions   MADE IN THE USA

  When installed on the base of sheet metal 9mm submachine-gun magazines, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide. TECHNICAL SPECIFICATIONS  Caliber 9x19mm Parabellum Platform MP5   MADE IN THE USA

  Leichtgewichtiges Bipod, kompatibel zu allen Schusswaffen mit Riemenösenaufnahme oder Adaptern mit Riemenösenaufnahme. The Magpul Bipod – Sling Stud QD offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just 13 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.   MADE IN THE USA

  Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. MADE IN THE USA

  Designed to military standards, the PRS Lite is intended for Mil-Spec USGI carbine/SR25 collapsible/A5 extension tubes* for .223 and .308 receiver-pattern rifles.   Kompatible MIL-SPEC Buffer Tubes sowie Zubehör siehe unter diesen Artikel, Zubehör.  The PRS Lite provides much of the same adjustability and many features of our PRS GEN3 Precision-Adjustable Stock, with the added benefits of reduced weight and a price that’s almost half of its fully featured counterpart. At 10 ounces lighter than the PRS GEN3, it provides an optimized shooter interface with 0.8” of comb height and 1.4” of LOP adjustments. The low-profile rubber butt-pad is adjustable for height and cant and provides an extremely stable interface with the shooter’s shoulder. There are multiple attachment options for slings, including an ambidextrous 1.25” footman’s loop, a reversible QD sling swivel cup, and space for another optional QD sling swivel cup. MADE IN THE USA

  The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15 / M16 platform. Made in the USA. SPRING-LOADED FLIP UP SIGHT Spring-loaded flip up sight easily activated from either side or by pressing the top Protective wings shield the dual, same plane flip apertures Sight can still be folded with either large or small aperture in position Detent knob easily and positively adjusts windage IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction provides light weight and resists operational abuse DETENT AND SPRING PRESSURE KEEPS SIGHT ERECT Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. CLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons   RESOURCES MAG248 MBUS® Sight – Rear Installation Instructions  MADE IN THE USA

  The MOE (Magpul Original Equipment) Trigger Guard is an enhanced polymer drop in replacement for the AR15 / M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.  All mounting hardware included.

The NEW Ultra-Compact PDW Stock The MOE SL-M Carbine Stock – Mil-Spec is a drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes. It was specifically developed for ultra-compact, PDW-style military platform requirements and for users desiring a smaller, lighter stock. Similar to the SL-K, the SL-M features a shorter and slimmer profile that is optimized for PDW-length receiver extensions. With its small, non-slip rubber butt-pad and an angled toe, the SL-M was engineered to support shoulder transitions, even while wearing body armor and modular gear. It includes a unique, ambidextrous release latch that is shielded to prevent accidental deployment and minimizes rattle on the receiver extension without requiring additional locks, levers, or springs. The 1.25" footman's loop accepts an optional M-LOK® QD Sling Mount for push-button style QD sling swivels. IDEAL FOR PDW PLATFORMS Internal release latch feature mitigates rattle and wobble Ambidextrous shielded adjustment lever Angled toe for easy shouldering RUGGED CONSTRUCTION Non-slip rubber butt-pad Reinforced polymer construction   DIFFERENT SLING OPTIONS 1.25” ambidextrous sling loop Accepts M-LOK QD Sling Mount for QD sling swivel capability MADE IN THE USA

  The Enhanced Ejection Port Cover is a drop-in upgrade designed to provide an improved installation process, physical strength, and corrosion resistance over the standard USGI ejection port cover. Compatible with AR15/M16/M4 MIL-SPEC AR15 upper receivers that accept USGI ejection port covers. Traditional stamped-steel ejection ports are malleable, prone to corrosion, and require tools to install. The Enhanced Ejection Port Cover snaps into place easily without having to remove your hand guard or barrel nut, wind any loose springs, or adjust small e-clips. Constructed of impact-resistant injection molded polymer, it is corrosion resistant and will not bend or deform from impacts.   EASIER THAN… EASY Installs easily in seconds Direct replacement for USGI ejection port cover MORE RUGGED THAN METAL PORT COVERS Durable, injection-molded polymer construction Corrosion resistant components Will not bend or deform from impacts MADE IN THE USA   TECHNICAL SPECIFICATIONS  More Information Platform AR15, M4, M16 Other Specs Compatible with Mil-spec AR15 upper receivers that accept USGI ejection port covers  

  Kompatibel zu allen AR-10 Hersteller mit SR-25 Aufnahme sowie zu Schusswaffen mit baugleicher Aufnahme im Kaliber .308 WIN / 7.62 / 6.5 CM  The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover. Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding. Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.MADE IN THE USA

  Compatibel for min. 1.450'' / 36,83mm - max. 1.520” / 38,61mm outer diameter round suppressors with a body length of approximately 5.5” / 139mm. The Magpul Suppressor Cover - 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire and protect the user and equipment against burns, while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the Magpul Suppressor Cover - 5.5” minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can.  Additionally, it serves as an enhanced thermal insulator and signature reduction device, significantly mitigating mirage distortions to the shooter’s sight picture, reducing the likelihood of impact damage to the suppressor body, and lessening the chance of accidental heat-related injury or damage to personnel or equipment during weapon firing and cool down. Optimized for max. 1.5” / 38,10mm outer diameter round suppressors with a body length of approximately 5.5” / 139mm (not including attachment hardware / interface) such as the Surefire SOCOM556-RC2.   REDUCES THERMAL SIGNATURE OF HOST FIREARM AND MITIGATES MIRAGE EFFECTS IN SIGHT PICTURE MINIMIZES RETAINED HEAT, ALLOWING FASTER COOLING THAN ANY OTHER SUPPRESSOR COVER TECHNOLOGY  HIGH STRENGTH CORROSION RESISTANT STAINLESS STEEL HEAT SHIELD Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration TECHNICAL SPECIFICATIONS More Information Outer Diameter (OD) 2.5 in. Platform AR15, M4, M16 Weight 9.6 oz. MADE IN THE USA

 The Magpul CTR (Compact/Type Restricted) - Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3" thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Sling Mounts: Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs Made in the USA

  Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 3 usable slots and a max overall length of 1.6". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option LIGHTWEIGHT REINFORCED POLYMER Cammed T-nuts Recoil / impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips MADE IN THE USA

The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, highly reliable 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others). It features steel-reinforced locking lugs, a removable floorplate, constant curve geometry, stainless steel spring, and a low-friction follower for the performance and military-grade durability you expect from a PMAG.   MADE IN THE USA

    Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (5 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.  5 Slots, max overall length of 2.5". MADE IN THE USA

  The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles in the smallest possible magazine size. It features true 10-round capability and includes a constant-curve body, a high-quality stainless steel spring, a self-lubricating anti-tilt follower, and a snap on impact / dust cover. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance. Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830" OAL. Perfect for use with a bipod or when shooting off of a pack. MADE IN THE USA

  Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Made in the USA. MOUNTS DIRECTLY TO M-LOK COMPATIBLE SYSTEMS Multi-directional mounting Intermediate spacing option LIGHTWEIGHT REINFORCED POLYMER Cammed T-nuts Recoil / impact mitigation lugs  RESOURCES M-LOK Technical Resources: M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

  Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (7 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots, max overall length of 3.3".  MADE IN THE USA

  The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. HIGH STRENGTH POLYMER VERTICAL GRIP MOUNTS DIRECTLY TO  M-LOK     LOW PROFILE AND LIGHT WEIGHT MAGPUL TSP TEXTURE For positive control in all environments     DESIGNED TO IMPROVE ERGONOMICS AND WEAPON CONTROL MADE IN THE USA

  Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights and vertical grips. Injection molded from a proprietary reinforced composite for enhanced strength and durability, our M-LOK Polymer Rail Sections are light weight and feature beveled ends to reduce snagging and eliminate sharp corners and edges. Includes all hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends. Includes 7 usable slots and a maximum overall length of 3.3 in. DIRECTLY MOUNTS TO M-LOK COMPATIBLE SYSTEMS Capable of multi-directional mounting Intermediate spacing option RUGGED REINFORCED POLYMER CONSTRUCTION Cammed T-Nuts Built in recoil/impact mitigation lugs   RESOURCES M-LOK Description and FAQs M-LOK Installation Tips  MADE IN THE USA

    Kompatibel zu allen AR-10 Herstellern sowie zu Repetierbüchsen wie MOSSBERG, RUGER und TROY Modelle im Kaliber .308 WIN oder 6,5 Creedmoor welche AR-Magazine aufnehmen.   The 7.62x51 NATO (.308 Winchester) PMAG 25 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 25-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining. Made in the USA.

  Details: Kompatibel für alle GLOCK 17, 18, 19, 26, 34, 45 usw. Kompatibel für alle AR-15 Modelle im Kaliber 9X19 mit Glock Lower Receiver Kompatibel für alle GLOCK Modelle der Generation 1-5 NICHT kompatibel für Slim oder Kompaktmodelle welche ein einreihiges Magazin besitzen The PMAG 21 GL9 is a 21-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 140MM competition magazine, the PMAG 21 GL9 offers additional capacity without the need for expensive extensions. Our Glock magazines come with many of our other platform PMAG features, including a high visibility controlled-tilt follower, a stainless steel spring, a floorplate that's easily removable for cleaning, a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. The PMAG 21 GL 9 drops free from the firearm whether it's loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 21 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip. Made in the USA.

   The next-generation PMAG 40 GEN M3 is a 40-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with an expanded feature set and greater compatibility, it incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR~ MK 16/16S, and others. The PMAG 40 GEN M3 features a long-life stainless steel spring, a four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.  Made in the USA.

The PMAG 27 GL9 – GLOCK is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM competition magazine, the PMAG 27 GL9 offers additional capacity without the need for expensive extensions. Includes a high visibility, controlled-tilt follower, a stainless steel spring, and an easily removable floorplate for cleaning. Also includes a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. Drops free when loaded or unloaded. The PMAG 27 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip. Made in the USA

  The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover. Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding. Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.MADE IN THE USA