Produkte von SPUHR
SPUHR ist ein Hersteller für hochqualitative Zielfernrohr-Montagesysteme mit Sitz in Schweden. Das Unternehmen beliefert in erster Linie militärische und behördliche Einrichtungen, 2015 entschieden Sie sich auch diese Montagen am zivilen Sektor zu vertreiben.
Das innovative Design ermöglicht es das Anbringen von nützlichem Zubehör an verschiedensten Montagepunkten wie zusätzliche Picatinnyschienen, Halterungen für Reflexvisiere, Schusswinkelkompensatoren usw.
Hierbei stellt SPUHR eine Vielzahl an zusätzlichen Adaptern bereit um die individuelle Lösung für einen Schützen zu finden. SPUHR ist unserer Meinung nach einer der führenden Zielfernrohrmontagehersteller im High-End Qualitätssegment.
ISMS
Ideal Scope Mount System
Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs.
Durability
Prevents damage on scope due to flexing during heavy recoil or rough handling. The snipers rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories.
Scope rotation
Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted.
Mounting placements
Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend you don ́t want the sights to be mounted on the forend. Our mounting system have up to seven interfaces for accessories, and the laser can easily be attached to the scope mount, providing the advantage of undisturbed laser and having the weight close to the centre of the gun instead of forward.
Tilt
Mounts can be delivered in various tilts. The tilt is clearly engraved on the mount, in both MIL and MOA.
Accessible and readable dials
The rings are cut at 45 degrees instead of horizontaly, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs.It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.
The rings have index marks on the top and right side, making low knobs more easily readable.
Accessories
Provides use of various accessories such as angle cosine indicator (ACI), back up sights, lasers, illuminators, night vision mounts etc. with a minimized ”footprint”. With traditional mounts this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The ”Ideal Scope Mount System”™ have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.
Level
The sight mount have a level included in the rear of the mount.
The initial letters identify the type/firearm/rail the mount is designed for:
QDP - Quick Detachable mount Picatinny
SA - Scope mount Accuracy International (11mm dovetail)
SP - Scope mount Picatinny
SS - Scope mount Sauer (for Sauer SSG and STR rifles)
ST - Scope mount TRG (17 mm dovetail)
SR - Scope Rings (separate rings for Picatinny rail)
The first digit identifies tube diameter:
3 - 30 mm tube
4 - 34 mm tube
5 - 35 mm tube
6 - 36 mm tube
7 - 40 mm tube
The second digit identifies tilt:
0 - 0 tilt
3 - 3 MIL/10.3 MOA
6 - 6 MIL/20.6 MOA
7 - 7 MIL/24 MOA tilt
8 - 13 MIL/44.4 MOA
9 - 9 MIL/31 MOA
Note: The SP-61602 and SP-41808 feature two digits for tilt: 16, indicating a tilt of 16 MIL/55 MOA, and 18, indicating 18 MIL/61.8 MOA. First run of SP-4803b had 11 MIL/40 MOA tilt.
The third digit (if other than 0) is for special versions:
1 - Cantilever mount
2 - Extended cantilever mount
3 - Short rear top cover for the S&B Ultra Short
4 - Medium cantilever mount
The fourth digit identifies height:
1 - 30 mm / 1.18"
2 - 38 mm / 1.50"
4 - 48 mm / 1.89"
6 - 34 mm / 1.35" (except for on Cantilever mounts)
8 - 44 mm / 1.73"
Note: The height is always measured from the top of the rail to the centerline of the optics. On a tilted mount the measurement is made at the back plane of the rear ring.
B suffix
Some mounts feature a B suffix following the model number. In the ISMS line this indicates an extra-long mount for scopes with extended length erector housings, such as the U.S. Optics TPAL and the NightForce B.E.A.S.T.
Cantilever Mounts
We currently offer three heights for our cantilever mounts. The high cantilever mounts (where the third digit is a 1) are 38 mm / 1.5" high, the medium cantilever mounts (where the third digit is a 4 - currently only available as as QDP) are 36 mm/1.35" high, and the extended cantilever mounts (where the third digit is a 2) are 32 mm / 1,26" high.
QDP - Quick Detachable mount Picatinny
SA - Scope mount Accuracy International (11mm dovetail)
SP - Scope mount Picatinny
SS - Scope mount Sauer (for Sauer SSG and STR rifles)
ST - Scope mount TRG (17 mm dovetail)
SR - Scope Rings (separate rings for Picatinny rail)
The first digit identifies tube diameter:
3 - 30 mm tube
4 - 34 mm tube
5 - 35 mm tube
6 - 36 mm tube
7 - 40 mm tube
The second digit identifies tilt:
0 - 0 tilt
3 - 3 MIL/10.3 MOA
6 - 6 MIL/20.6 MOA
7 - 7 MIL/24 MOA tilt
8 - 13 MIL/44.4 MOA
9 - 9 MIL/31 MOA
Note: The SP-61602 and SP-41808 feature two digits for tilt: 16, indicating a tilt of 16 MIL/55 MOA, and 18, indicating 18 MIL/61.8 MOA. First run of SP-4803b had 11 MIL/40 MOA tilt.
The third digit (if other than 0) is for special versions:
1 - Cantilever mount
2 - Extended cantilever mount
3 - Short rear top cover for the S&B Ultra Short
4 - Medium cantilever mount
The fourth digit identifies height:
1 - 30 mm / 1.18"
2 - 38 mm / 1.50"
4 - 48 mm / 1.89"
6 - 34 mm / 1.35" (except for on Cantilever mounts)
8 - 44 mm / 1.73"
Note: The height is always measured from the top of the rail to the centerline of the optics. On a tilted mount the measurement is made at the back plane of the rear ring.
B suffix
Some mounts feature a B suffix following the model number. In the ISMS line this indicates an extra-long mount for scopes with extended length erector housings, such as the U.S. Optics TPAL and the NightForce B.E.A.S.T.
Cantilever Mounts
We currently offer three heights for our cantilever mounts. The high cantilever mounts (where the third digit is a 1) are 38 mm / 1.5" high, the medium cantilever mounts (where the third digit is a 4 - currently only available as as QDP) are 36 mm/1.35" high, and the extended cantilever mounts (where the third digit is a 2) are 32 mm / 1,26" high.
Für die Filterung wurden keine Ergebnisse gefunden!
TIPP!
SPUHR SP-4901 Ø34 H30mm 9MIL PIC Abmessungen und Produktdetails, siehe unter diesem Artikel "Verfügbare Downloads" Zubehör zu dieser Montage, siehe unter diesem Artikel, Zubehör SPUHR® ist ein Hersteller für hochqualitative Zielfernrohr-Montagesysteme mit Sitz in...
€ 369,00 *
TIPP!
SPUHR SP-4002C Ø34 H38mm 0MIL PIC GEN3 Modell, ersetzt Artikel SP-4002 Ø34 0 MIL/0 MOA Height: 38 mm/1.5” Length: 120 mm/4.72” (body) 130 mm/5.12” (OAL) Weight: 256 g/9.0 oz Abmessungen und Produktdetails, siehe unter diesem Artikel "Verfügbare Downloads" Zubehör zu...
€ 369,00 *
TIPP!
SPUHR QDP-3016 Ø30 H38mm 0MIL QDP Cantilever Schnellwechselmontage für alle AR-15 und AR-10 Schusswaffen bis zu einem Objektivdurchmesser von 56 Abmessungen und Produktdetails siehe Downloadbereich unter diesem Artikel Zubehör zu dieser Montage siehe unter diesem...
€ 449,00 *
SPUHR SP-4602 Ø34 H38mm 6MIL PIC Abmessungen und Produktdetails, siehe unter diesem Artikel "Verfügbare Downloads" Zubehör zu dieser Montage, siehe unter diesem Artikel, Zubehör SPUHR® ist ein Hersteller für hochqualitative Zielfernrohr-Montagesysteme mit Sitz in...
€ 369,00 *
TIPP!
SPUHR SP-4016 Ø34 H38mm 0MIL PIC Robuste Cantilevermontage für alle AR-Modelle in jedem Kaliber. Passgenau für Zielfernrohre mit einem Objektivdurchmesser von bis zu maximal 56mm. Extended Version für extra große Türme. SPUHR® ist ein Hersteller für hochqualitative...
€ 399,00 *
TIPP!
SPUHR SR-4000 Ø34 H25.4mm PIC Abmessungen und Produktdetails: Height: 25.4 mm/1” Length: 32 mm/1.26” Weight: 183 g/6.5 oz Includes the A-0080/81 Leveling Kit Zubehör zu dieser Montage siehe unter Artikelzubehör SPUHR® ist ein Hersteller für hochqualitative...
€ 349,00 *
SPUHR A-0035 Picatinny Rail 95 mm Picatinny Rail kompatibel zu allen SPUHR ® Blockmontagen sowie für alle SPUHR ® Ringmontagen und allen SPUHR ® Handguards . Nicht kompatibel zu KeyMod oder M-LOK Interfaces Details/Angebotsumfang: Picatinny Rail for Spuhr Interface...
€ 55,00 *
TIPP!
SPUHR MP5 / HK53 Handguard SPUHR MP5/HK53 Upgrade Hanguard Kompatibel zu allen MP5/HK53 und dessen Klonen. Leichter als der serienmäßige Handguard (111g) Handguard mit Schnittstellen/Interface System Material: Aus einem Block 7000er Aluminium gefräst Im...
€ 229,00 *
TIPP!
SPUHR MP5 Top Rail Optic mount SPUHR MP5 Top Rail Optic mount Kompatibel zu allen MP5 und dessen Klonen Leichtgewichtig, nur 113g Material: Aus einem Block 7075 T651 Aluminium gefräst Im Lieferumfang inkludiert: Schraubensatz + Montagekit Kompatibles Zubehör siehe...
€ 179,00 *
TIPP!
SPUHR Sling Swivel Interface for Spuhr HK MP5 /... SPUHR Sling Swivel Interface, kompatibel zu allen SPUHR ® HK MP5 / 417 / G3 / G36 Handguards . Nicht kompatibel zu KeyMod oder M-LOK Interfaces Details/Angebotsumfang: Sling Swivel Interface Includes screws Kompatibles Zubehör siehe...
€ 62,00 *
SPUHR A-0002 Picatinny Rail 55 mm Picatinny Rail kompatibel zu allen SPUHR ® Blockmontagen sowie für alle SPUHR ® Ringmontagen und allen SPUHR ® Handguards . Nicht kompatibel zu KeyMod oder M-LOK Interfaces Details/Angebotsumfang: Picatinny Rail for Spuhr Interface...
€ 55,00 *
SPUHR SR-3006 Ø30 H34mm PIC Abmessungen und Produktdetails: Height: 34 mm/1.35” Length: 32 mm/1.26” Weight: 201 g/7.1 oz Includes the A-0080/81 Leveling Kit Zubehör zu dieser Montage siehe Artikelzubehör SPUHR® ist ein Hersteller für hochqualitative...
€ 349,00 *
Zuletzt angesehen