Wechselsysteme

Specifications: Platform: AR-15 9mm GLOCK® Caliber: 9mm LugerBarrel: Chrome Lined 10.5" Chrome Moly, Full Auto Chamber, 1:10 TwistMuzzle Thread: 1/2-36 UNEFUpper Receiver: 9mm Extruded milled Aluminum A4, machined from 7075-T6 forged aluminumUpper Receiver Features: 9mm Port Door, No Forward AssistHandguard: R4 HandguardBolt Carrier Group: RRA Auto with GLOCK® CutInclude Receiver Height Front Sight Picatinny BaseInclude RRA 9mm A2 Flash HiderInclude RRA Charging HandleMADE IN THE USA Compatible accessories see under this article, accessories

Specifications: Platform: AR-15 9mm GLOCK® Caliber: 9mm LugerBarrel: Chrome Lined 4.5" Chrome Moly, Full Auto Chamber, 1:10 TwistMuzzle Thread: 1/2-36 UNEFUpper Receiver: 9mm Extruded milled Aluminum A4, machined from 7075-T6 forged aluminumUpper Receiver Features: 9mm Port Door, No Forward AssistHandguard: RRA Lightweight Free Float Rail Handguard, 4.25" M-LOK® CompatibleBolt Carrier Group: RRA Auto with GLOCK® CutInclude Low Pro M-LOK® Compatible HandstopInclude RRA Smith Vortex Flash Suppressor Include RRA Charging HandleMADE IN THE USA Compatible accessories see under this article, accessories

  Die D.A.R. GmbH ist ein mittelständisches Unternehmen, welches sich auf die Herstellung hochwertiger automatischer Präzisionswaffen des Typs AR-15 und AR-10 spezialisiert hat. Bei allen Produkten steht der besonders hohe Qualitätsanspruch im Vordergrund. Das Streben nach Perfektion und die Rückbesinnung auf deutsche Qualität und Wertschöpfung hat sich DYNAMIC ARMS RESEARCH zum Ziel gesetzt. Anders als bei konventionellen AR-Systemen ist die Barrel-Nut (Laufhaltemutter) nicht mit dem Vorderschaft verbunden, somit kann der Lauf bereits ab der Laufwurzel frei schwingen, dies fördert enorm die Präzision. Zusätzlich kommt hinzu, dass jeder Upper und Lower Receiver aus dem Vollen gefräst und aufeinander abgestimmt ist, der Lauf wird von D.A.R. handgeläppt, jede Schusswaffe besitzt eine echte durchgehende Picatinny Schiene, welche eine Einheit zusammen mit Upper-Receiver und Handguard bildet.  100% MADE IN GERMANY Spezifikationen: Dynamic Arms Research LONG RANGE SPORTER WechselsystemLaufhersteller: Lothar WaltherKaliber: 6.5 CreedmoorLauflänge:  26"Drall: 12"Drallprofil:  6 Züge rechtsLaufkontur:  25mm Super Bull BarrelLaufmaterial:  Spezial-GewehrlaufstahlLaufbeschichtung:  Tenifer-QPQLaufmündung:  11° Varmint Mündung Match Sonderbehandlung, Laufprofil handgeläppt Mündungsgewinde:  M18x1Mündungskomponente:  DAR 4-Kammer Super Bull CompGassystem: direct impingement, rifle lengthGasentnahme:  DAR Low Profile Gasblock 1000, einstellbarGehäuseoberteil:  DAR Upper Advanced Vorderschaft:  DAR M-LOK®  16“Ladehebel:  DAR Ladehebel, gasabweisend, beidseitig bedienbar Verschluss:  DAR VerschlussbaugruppeOberflächenbehandlung Upper: Mil-Spec III Harteloxiert Kompatibilität: Nur kompatibel zu DAR-10 Lower SystemenNicht kompatibel zu anderen AR-10 Herstellern

  This A1 Slick-Side Retro Complete Upper Barrel Assembly blends timeless design with modern performance for the discerning enthusiast. It features a 20″ 1-7 twist, chrome-lined barrel for superior accuracy and durability, with a manganese phosphate finish that resists corrosion while maintaining a period-correct appearance. Perfect for retro enthusiasts or modern shooters who appreciate a classic design with the performance of today’s technology. The barrel is paired with a front sight base (FSB), (.625″ diameter) and non-F marked for historical authenticity. The triangular A1 charging handle adds to the classic profile, giving you a smooth and efficient cycling experience every time. The A1 handguard not only preserves the traditional look, but maintains historical accuracy utilizing rivets to attach the heat shield for heat dissipation and a firm grip. At the front end, you’ll find the early A1 duckbill flash hider, a distinctive feature that reduces muzzle flash while maintaining a low-profile design. This upper is perfect for anyone looking to complete a retro build while benefitting from modern materials and construction techniques. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Full Chrome Complete Slick-Side Bolt Carrier Group Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design A1 Triangular charging handle for an authentic, sleek design A1 handguard with riveted heat shields for a classic aesthetic and functionality Early A1 duckbill flash hider for period-correct muzzle control Specifications: UR-01-E3-S Slick-Side Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-02 – A1 Front Sight Post (Round) A1 Slip Ring – Black Assembled with Retro A1 Rear Sight Kit (UR-21A-R) Retro A1 Port Door Cover Kit (UR-05A-R) UR-19A1 – Retro A1 Triangle Charging Handle – Black HG-A1-G – Retro A1 Handguard – ODG BL-06-LW – A1 Lock Washer BL-3P-DB – Early A1 Duckbill Flash Hider BC-AS-223FC – Full Chrome Complete Slick-Side Bolt Carrier Group Retro Chrome Firing Pin Retro Chrome retaining pin  Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

  This A1 Slick-Side Retro Complete Upper Barrel Assembly blends timeless design with modern performance for the discerning enthusiast. It features a 20″ 1-7 twist, chrome-lined barrel for superior accuracy and durability, with a manganese phosphate finish that resists corrosion while maintaining a period-correct appearance. Perfect for retro enthusiasts or modern shooters who appreciate a classic design with the performance of today’s technology. The barrel is paired with a front sight base (FSB), (.625″ diameter) and non-F marked for historical authenticity. The triangular A1 charging handle adds to the classic profile, giving you a smooth and efficient cycling experience every time. The A1 handguard not only preserves the traditional look, but maintains historical accuracy utilizing rivets to attach the heat shield for heat dissipation and a firm grip. At the front end, you’ll find the early A1 duckbill flash hider, a distinctive feature that reduces muzzle flash while maintaining a low-profile design. This upper is perfect for anyone looking to complete a retro build while benefitting from modern materials and construction techniques. Features: 20″ 1-7 twist barrel for accuracy Chrome-lined chamber and Chrome-lined bore for wear resistance and longevity Manganese Phosphate exterior finish for enhanced corrosion resistance Full Chrome Complete Slick-Side Bolt Carrier Group Chambered in 5.56 NATO .625″ Non-F marked Front Sight Base (FSB) for a historically accurate design A1 Triangular charging handle for an authentic, sleek design A1 handguard with riveted heat shields for a classic aesthetic and functionality Early A1 duckbill flash hider for period-correct muzzle control Specifications: UR-01-E3-S Slick-Side Upper Receiver, made from 7075-T6 Aluminum Forging BL-F20-7C 20″ Chrome Lined Pencil Barrel w/FSB (.625 Non F Marked) 1-7 Twist Rate Caliber: .223 REM Chrome lined chamber and bore Manganese Phosphate exterior finish Assembled with Front Sling Swivel FS-02 – A1 Front Sight Post (Round) A1 Slip Ring – Black Assembled with Retro A1 Rear Sight Kit (UR-21A-R) Retro A1 Port Door Cover Kit (UR-05A-R) UR-19A1 – Retro A1 Triangle Charging Handle – Black HG-A1 – Retro A1 Handguard – Black BL-06-LW – A1 Lock Washer BL-3P-DB – Early A1 Duckbill Flash Hider BC-AS-223FC – Full Chrome Complete Slick-Side Bolt Carrier Group Retro Chrome Firing Pin Retro Chrome retaining pin  Informations: AT - Category B Including C.I.P.  Compatible with AR-15 Lower receiver according to Mil-Spec diameter Complete the correct look with the LUTH A1 Butt Stock and A1 Pistol Grip in Black or OD Green Compatibel accessories, see under this article, accessories MADE IN THE USA

PERUN X-16 Wechselsystem komplett Spezifikationen: PERUN X-16 Upper Receiver CompleteShort Stroke Piston - Direct Impingement Hybrid SystemMonolith Upper Receiver, T- 7075 Aluminium, gefrästLauflänge: 16‘‘, MID lengthKaliber: 7,62x39Drall: 8“Laufkontur:  GovernmentMündungsgewinde:  5/8-24 UNEFMündungskomponente:  T-COMP Muzzle BrakeEinstellbarer Low Profile Gasblock mit KlickverstellungHandguard: M-LOK® 13,5“, LightweightAmbi Durchladehebel, beidseitig anwendbarAmbi QD- Receiver Attachment Flip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel zu allen X-16 Lower ReceiverKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

Hochwertiges Wechselsystem mit Adjustable DI-System Spezifikationen: PERUN X-15™Halbautomatisches WechselsystemTA Adjustable Gas Block mit KlickverstellungTA Raptorial Ambidex Extended Charging HandleDirect Impingement SystemUpper aus einem geschmiedeten Block 7075 Aluminium gefrästFull Mil-SpecLauflänge: 10.5", Carbine lengthKaliber: 5.56 NATO / .223 REMDrall: 7"Laufkontur: M4Mündungsgewinde: 1/2-28 UNEFMündungskomponente: T-COMP Muzzle BrakeTA Ultra Lightweight Premium Freefloat M-LOK® Handguard, 9.5"Flip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel mit allem Zubehör nach Mil-Spec Diameter FertigungKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

Hochwertiges Wechselsystem mit Adjustable DI-System Spezifikationen: PERUN X-15™Halbautomatisches WechselsystemTA Adjustable Gas Block mit KlickverstellungTA Raptorial Ambidex Extended Charging HandleDirect Impingement SystemUpper aus einem geschmiedeten Block 7075 Aluminium gefrästFull Mil-SpecLauflänge: 14.5", Carbine lengthKaliber: 5.56 NATO / .223 REMDrall: 7"Laufkontur: M4Mündungsgewinde: 1/2-28 UNEFMündungskomponente: T-COMP Muzzle BrakeTA Ultra Lightweight Premium Freefloat M-LOK® Handguard, 13.5"Flip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel mit allem Zubehör nach Mil-Spec Diameter FertigungKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

Hochwertiges Wechselsystem mit Adjustable DI-System Spezifikationen: PERUN X-15™Halbautomatisches WechselsystemTA Adjustable Gas Block mit KlickverstellungTA Raptorial Ambidex Extended Charging HandleDirect Impingement SystemUpper aus einem geschmiedeten Block 7075 Aluminium gefrästFull Mil-SpecLauflänge: 16", Carbine lengthKaliber: 5.56 NATO / .223 REMDrall: 8"Laufkontur: M4Mündungsgewinde: 1/2-28 UNEFMündungskomponente: T-COMP Muzzle BrakeTA Ultra Lightweight Premium Freefloat M-LOK® Handguard, 13.5"Flip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel mit allem Zubehör nach Mil-Spec Diameter FertigungKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

  The AM-15 A2 Optic Ready Upper is ready for you to mount an optic and let range day commence! Hochwertiges AR-15 Wechselsystem von ANDERSON im Kaliber 7,62x39, kompatibel mit allen AR-15 MIL-SPEC Lower Receiver. Details/Angebotsumfang: ANDERSON AM-15 A2 Carbine Wechselsystem Optic Ready Inklusive Verschluss, M16 Profile Inklusive Charging Handle Inklusive Flash Hider Upper aus einem geschmiedeten Block 7075-T6 Aluminium gefräst Kaliber 7,62x39 Drall 1:10 Gas Block Diameter: .750 (AR- Standard Diameter) Gassystem: Direct Impingement, Carbine length Kaltgehämmerter 16 Zoll Lauf aus 4150 Chrom-Molybdän-Vanadium-Stahl M16 BCG  Oberfläche: MIL-SPEC Type 3 Hard Anodized Black M16 A2 Handguard, Carbine lenght Mündungsgewinde 5/8x24 UNEF Kompatibel mit allen AR-15 Magazinen im Kaliber mit allen AR-15 Magazinen im Kaliber 7,62X39 wie DURAMAG, ASC, D&H etc. High Rise Picatinny Gasblock kann mittels 2 Inbusschrauben entfernt werden, Umbau von Handguard bei Bedarf möglich Magazin ab Werk nicht im Lieferumfang Benötigte und kompatible Magazine sowie Visiereinrichtungen und Zubehör, siehe unter diesem Artikel, Zubehör Every part manufactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON.

PERUN X-16 Wechselsystem komplett Spezifikationen: PERUN X-16 Upper Receiver CompleteShort Stroke Piston - Direct Impingement Hybrid SystemMonolith Upper Receiver, T- 7075 Aluminium, gefrästLauflänge: 8.5‘‘, Pistol lengthKaliber: .223 REM / 5.56 NATODrall: 7“Laufkontur: M4Mündungsgewinde:  1/2-28 UNEFMündungskomponente:  T-COMP Muzzle BrakeEinstellbarer Low Profile Gasblock mit KlickverstellungHandguard: M-LOK® 8.5“, Ultra LightweightAmbi Durchladehebel, beidseitig anwendbarAmbi QD- Receiver AttachmentFlip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel zu allen X-16 Lower ReceiverKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

  This AM-15 M4 Complete Upper is fitted with Anderson's lightweight, 12'' MLOK Handguards that run all the way up to the muzzle device, giving you plenty of space and options to accessorize your rifle! This upper is built upon an Anderson Forged Upper Receiver CNC machined from 7075 T6 aluminum. Inspected throughout the entire manufacturing process to ensure they meet military specifications and standards, these receivers are built to be durable and ready to perform, no matter the mission. Equipped with a low-profile, Anderson Steel gas block, this rifle runs on a carbine gas system. This Upper runs on an Anderson 8620 Steel, standard M-16 profile, Bolt Carrier matched with a 9310 steel Anderson Bolt to keep your rifle cycling efficiently.  Every Upper Receiver from Anderson Manufacturing is hand assembled by our Assembly Team, function tests are performed during and post-build (test fire to ensure proper gas and cycling) to ensure that our customer gets a high quality rifle. SPECS: ANDERSON AM-15 M4 M-LOK® Complete Upper Full MIL-SPEC Upper machined from a forged block of 7075-T6 aluminum Caliber  5.56 NATO / .223 REM Twist 1:7 Gas Block Diameter: .750 Gas-System: Direct Impingement, Carbine lenght Cold hammered 14.5 inch barrel made from 4150 chrome molybdenum vanadium steel Barrel Contour: Carbine BCG: Mag Phosphate, M16 Auto Profile Finish: Mil-Spec Type III Black Hard Anodized 12‘‘ Lightweight M-LOK® Free Float Handguard Included A2 Nato Flash Hider Included Forward Assist Included Charging Handle Included Dust Cover Muzzle Thread: 1/2x28 UNEF Informations: Included C.I.P. AT - Category B  Compatible with all AR-15 lower receivers according to Mil-Spec Diameter manufacturing Compatible accessories, see accessories under this article Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON.

  Hochwertiges AR-15 Wechselsystem in der neusten CQB Ausführung von ANDERSON. Zuverlässig, robust und schnell, ideal für dynamische Anwendungen, unerreichtes Preis-Leistungsverhältnis. Details/Angebotsumfang: ANDERSON AM-9 CQB M-LOK® AR-15 Wechselsystem Kompatibel mit allen 2-reihigen GLOCK und Aftermarket Magazine wie z.B. MAGPUL, KCI usw. LRBHO Funktion, je nach Wahl des verwendeten Lower Receivers oder Magazinadapters Upper aus einem geschmiedeten Block 7075-T6 Aluminium gefräst Kaliber 9X19 / 9mm Luger Drall 1:10 Kaltgehämmerter 10,5 Zoll Lauf aus 4150 Chrom-Molybdän-Vanadium-Stahl Oberfläche: MIL-SPEC Type 3 Hard Anodized Black 9mm A2 Flash Hider Inklusive Verschluss mit GLOCK® Cut Inklusive Charging Handle 10‘‘ Lightweight Free Float M-LOK® Handguard Mündungsgewinde 1/2-28 UNEF Kompatible Schalldämpfer, Lower Receiver, Magazinadapter sowie Zubehör, siehe unter diesem Artikel, Zubehör Funktion in Verbund mit AR-15 GLOCK® Lower Receiver oder GLOCK® AR-15 Magazinadapter Export on request, only for firearms dealer Every part manufactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON.

This Anderson M4A2 Complete Upper features an Anderson 14.5" barrel, chambered in 5.56/.223, and equipped with front sight base. It has the iconic clamshell handguards and A2 flash hider. This Complete Upper is built on an Anderson's Forged Upper, all parts are installed on-site by our Anderson Assembly Team. Most parts installed are made on-site, in Hebron, KY, and have passed a multitude of inspections and test along the manufacturing process to ensure they meet military specifications and will function properly when assembled. Throughout the assembly process there are tests for functionality and upon completion every firearm is test fired to ensure proper cycling and complete functionality. SPECS: ANDERSON M4A2 Complete Upper ReceiverFull MIL-SPECUpper machined from a forged block of 7075-T6 aluminumFinish: Mil-Spec Type III Black Hard AnodizedCaliber 5.56 Nato / .223 REMTwist: 1:8Gas-System: Direct Impingement, Carbine lengthCold hammered 14.5 inch barrel made from 4150 chrome molybdenum vanadium steelBarrel Contour: M4 Profile BCG: Mag Phosphate, M16 Auto ProfileA2 Flash HiderA2 Front SightA2 HandguardIncluded Forward AssistIncluded Charging HandleIncluded Dust CoverMuzzle Thread: 1/2x28 UNEF Informations: Included C.I.P.AT - Category B Compatible with AR-15 lower receivers according to Mil-Spec diameter manufacturingCompatible accessories, see accessories under this article Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer. 100% AMERICAN MADE. 100% ANDERSON.

Die D.A.R. GmbH ist ein mittelständisches Unternehmen, welches sich auf die Herstellung hochwertiger automatischer Präzisionswaffen des Typs AR-15 und AR-10 spezialisiert hat. Bei allen Produkten steht der besonders hohe Qualitätsanspruch im Vordergrund. Das Streben nach Perfektion und die Rückbesinnung auf deutsche Qualität und Wertschöpfung hat sich DYNAMIC ARMS RESEARCH zum Ziel gesetzt. 100 % MADE IN GERMANY Anders als bei konventionellen AR-Systemen ist die Barrel-Nut (Laufhaltemutter) nicht mit dem Vorderschaft verbunden, somit kann der Lauf bereits ab der Laufwurzel frei schwingen, dies fördert enorm die Präzision. Zusätzlich kommt hinzu, dass jeder Upper und Lower Receiver aus dem Vollen gefräst und aufeinander abgestimmt ist, der Lauf wird von D.A.R. handgeläppt, jede Schusswaffe besitzt eine echte durchgehende Picatinny Schiene, welche eine Einheit zusammen mit Upper-Receiver und Handguard bildet.  Das .223 Wylde Patronenlager bietet den besten Kompromiss wenn es darum geht höchste Präzision mit der größten Vielfalt an Munitionslaborierungen oder unterschiedlichen Geschosslängen bei sicheren Gasdrücken zu erreichen und ist somit auch für Wiederlader sehr interessant. Das nach Bill Wylde benannte Hybrid-Patronenlager ermöglicht sowohl die Verwendung von .223 Remington Patronen als auch die nach SAMMI, mit etwas höheren Druck entwickelnde 5.56x45mm NATO Patrone. Spezifikationen: Dynamic Arms Research DAR-15 IPSC WechselsystemLaufhersteller: Lothar WaltherKaliber: .223 Rem Wylde / 5.56 NatoLauflänge: 16,75"Drall:  8“Drallprofil:  6 Züge rechtsLaufkontur:  Super Light BarrelLaufmaterial:  Spezial-GewehrlaufstahlLaufbeschichtung:  Tenifer-QPQLaufmündung:  11° Varmint Mündung Match Sonderbehandlung, Laufprofil handgeläppt Mündungsgewinde:  1/2"-28 UNEFMündungskomponente:  DAR Dynamic CompGassystem: direct impingement, rifle lengthGasentnahme:  DAR Low Profile Gasblock 750, einstellbarGehäuseoberteil:  DAR Upper Advanced Vorderschaft:  DAR Carbon Tube inkl. PicatinnyschieneLadehebel:  DAR Ladehebel, gasabweisend, beidseitig bedienbar Verschluss:  DAR VerschlussbaugruppeOberflächenbehandlung Upper: Mil-Spec III HarteloxiertAuslieferung:  DAR Koffer Kompatibilität: Nur kompatibel zu DAR-15 Lower Systemen

Die D.A.R. GmbH ist ein mittelständisches Unternehmen, welches sich auf die Herstellung hochwertiger automatischer Präzisionswaffen des Typs AR-15 und AR-10 spezialisiert hat. Bei allen Produkten steht der besonders hohe Qualitätsanspruch im Vordergrund. Das Streben nach Perfektion und die Rückbesinnung auf deutsche Qualität und Wertschöpfung hat sich DYNAMIC ARMS RESEARCH zum Ziel gesetzt. 100 % MADE IN GERMANY Anders als bei konventionellen AR-Systemen ist die Barrel-Nut (Laufhaltemutter) nicht mit dem Vorderschaft verbunden, somit kann der Lauf bereits ab der Laufwurzel frei schwingen, dies fördert enorm die Präzision. Zusätzlich kommt hinzu, dass jeder Upper und Lower Receiver aus dem Vollen gefräst und aufeinander abgestimmt ist, der Lauf wird von D.A.R. handgeläppt, jede Schusswaffe besitzt eine echte durchgehende Picatinny Schiene, welche eine Einheit zusammen mit Upper-Receiver und Handguard bildet. Das .223 Wylde Patronenlager bietet den besten Kompromiss wenn es darum geht höchste Präzision mit der größten Vielfalt an Munitionslaborierungen oder unterschiedlichen Geschosslängen bei sicheren Gasdrücken zu erreichen und ist somit auch für Wiederlader sehr interessant. Das nach Bill Wylde benannte Hybrid-Patronenlager ermöglicht sowohl die Verwendung von .223 Remington Patronen als auch die nach SAMMI, mit etwas höheren Druck entwickelnde 5.56x45mm NATO Patrone. Spezifikationen: Dynamic Arms Research DAR-15 M5 WechselsystemLaufhersteller: Lothar WaltherKaliber: .223 WyldeLauflänge: 16,75"Drall: 8“Drallprofil:  6 Züge rechtsLaufkontur:  Heavy Barrel LightGassystem: direct impingement, mid lengthLaufbeschichtung:  Tenifer-QPQLaufmündung:  11° Varmint Mündung Match Sonderbehandlung, Laufprofil handgeläppt Mündungsgewinde:  1/2"-28 UNEFMündungskomponente:  DAR Dynamic CompGasentnahme:  DAR Low Profile Gasblock 750, einstellbarGehäuseoberteil:  DAR Upper Advanced Vorderschaft:  DAR M-LOK®  16“ Ladehebel:  DAR Ladehebel, gasabweisend, beidseitig bedienbarAuslieferung:  DAR Koffer Kompatibilität: Nur kompatibel zu DAR-15 Lower Systemen

PERUN X-16 Wechselsystem komplett Spezifikationen: PERUN X-16 Upper Receiver CompleteShort Stroke Piston - Direct Impingement Hybrid SystemMonolith Upper Receiver, T- 7075 Aluminium, gefrästLauflänge: 10.5‘‘, Carbine lengthKaliber: 7,62x39mmDrall: 8“Laufkontur: GovernmentMündungsgewinde:  5/8-24 UNEFMündungskomponente:  A2 7.62 Nato Flash HiderEinstellbarer Low Profile Gasblock mit KlickverstellungHandguard: M-LOK® 10“, LightweightAmbi Durchladehebel, beidseitig anwendbarAmbi QD- Receiver Attachment Flip-Up VisierungOberfläche: Mil-Spec Type III harteloxiertKompatibel zu allen X-16 Lower ReceiverKompatibles Zubehör siehe unter diesem Artikel, ZubehörMADE IN SLOVENIA

  Genesis Arms began as most companies do: from a vision for something great. A void was discovered, which put into motion a mission to fill that void. The word "Genesis" means "origins, creation, and beginning." We are proud to be the first firearms company to successfully design, patent, and manufacture a 12 gauge utilizing the AR308 DPMS GEN1 receiver design. Our patented magazine design overcomes the shortcomings within the current commercial offerings of 12 gauge magazines. These are the core components that make Genesis Arms the leader of shot shell innovation and the manufacturer of the GEN-12: THE ULTIMATE 12 GAUGE. Note: WHEN FITTING A GEN-12 UPPER RECEIVER GROUP TO A LOWER, WE CAN ONLY GUARNTEE PROPER FITMENT AND FUNCTION WITH OUR LOWER RECEIVER. OTHER  DPMS STYLE LOWER RECEIVERS WILL MATE TO THE GEN-12 UPPER, BUT MAGAZINE FITMENT AND PROPER FUNCTION CANNOT BE GUARANTEED. SPECS Designed to mate to DPMS GEN1 patterned 308 lowers Semi-Auto Only 18 ¾” barrel length Chamber 2 ¾” and 3” 12 gauge shells External choke Thread pitch- M22x.0.75 Short recoil operation Free float handguard with M-LOK® rail at 3,6, 9 o’clock and full picatinny top rail Right side charging knob Fit Milspec AR Triggers 100% MADE IN THE USA INCLUDES 5 round magazine Beef up kit (must be installed in Lower receiver) Informations:   Included C.I.P. AT - Category B Included EXW 5 ROUND MAGAZINE Compatible accessories see under this article, accessories

  Whether you’re looking to build a AR15 for plinking, training, or small-game hunting, this .22 LR RESOLUTE® Upper Group fits the bill perfectly. The Mk4 .22 LR upper is designed to work with any standard AR15 lower and our .22 Conversion Magazines. Available in six different Cerakote finishes, all CMMG® Upper Groups come complete with bolt carrier group and ZEROED™ accessories including: ZEROED AR15 Polymer Dust Cover ZEROED 22LR Ambi Charging Handle ZEROED Muzzle Brake 5.56mm  PLATFORM MK4 / AR-15 CALIBER .22 LR OPERATING SYSTEM TRADITIONAL BLOWBACK BARREL LENGTH 17 BARREL TWIST 1:16 BARREL CONTOUR MT BARREL MATERIAL 4140CM, SBN BARREL TWIST 1:16 MUZZLE DEVICE CMMG ZEROED MUZZLE BRAKE MUZZLE THREAD 1/2 X 28 GAS PORT LOCATION N/A GAS BLOCK N/A UPPER RECEIVER BILLET 6061 T6 ALUMINUM HAND GUARD CMMG EML15 M-LOK FINISH CERAKOTE ARMOR BLACK CHARGING HANDLE CMMG ZEROED AMBI WEIGHT 4.0 LBS LENGTH 25"   Informations: C.I.P. included Laser markings were carried out covertly To place an order, contact your local firearm dealer EXPORT on request, only for firearm dealers MADE IN THE USA

  This AM-15 M4 Complete Upper is fitted with Anderson's new 13" Stable-Lock TRS Handguard. The Stable-Lock TRS Handguard System features MLOK compatibility dispersed evenly throughout its length with (2) QD sling-points located at the magazine well-end at the 3 and 9 o'clock positions.  This upper is built upon an Anderson Forged Upper Receiver CNC machined from 7075 T6 aluminum. Inspected throughout the entire manufacturing process to ensure they meet military specifications and standards, these receivers are built to be durable and ready to perform, no matter the mission. Equipped with a low-profile, Anderson Steel gas block, this rifle runs on a carbine gas system. This Upper runs on an Anderson 8620 Steel, standard M-16 profile, Bolt Carrier matched with a 9310 steel Anderson Bolt to keep your rifle cycling efficiently.  Every Upper Receiver from Anderson Manufacturing is hand assembled by our Assembly Team, function tests are performed during and post-build (test fire to ensure proper gas and cycling) to ensure that our customer gets a high quality rifle. SPECS: ANDERSON AM-15 M4 M-LOK® Complete Upper Full MIL-SPEC Upper machined from a forged block of 7075-T6 aluminum Caliber  5.56 NATO / .223 REM Zwist 1:8 Gas Block Diameter: .750 Gas-System: Direct Impingement, Carbine lenght Cold hammered 14.5 inch barrel made from 4150 chrome molybdenum vanadium steel Barrel Contour: Carbine BCG: Mag Phosphate, M16 Profile Finish: Mil-Spec Type III Black Hard Anodized 13‘‘ TRS M-LOK® Free Float Handguard Included A2 Nato Flash Hider Included Forward Assist Included Charging Handle Included Dust Cover Muzzle Thread: 1/2x28 UNEF Informations: Included C.I.P. AT - Category B  Compatible with all AR-15 lower receivers according to Mil-Spec Diameter manufacturing Compatible accessories, see accessories under this article Every part manuactured is made to Military Specification and standards while also meeting with our own quality standards, passing through vigorous quality inspections through each phase of its journey to you, our customer.  100% AMERICAN MADE. 100% ANDERSON.

  High-Grade Semi-Auto AR-15 Rimfire Conversion Kit with Stainless Steel Barrel, Chamber and Stainless Steel Bolt Carrier Group. An AR22 offers an economical and effective way to improve your skills. It isn’t just practical—it’s also fun, making it a valuable and enjoyable tool for your arsenal. Nordic Components 22RB dedicated 22 upper receiver converts your standard AR-15 pattern lower to a dedicated .22LR for recreational shooting, training, and hunting. The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated .22 upper that looks and feels like a centerfire rifle. SUPPRESSOR READY! The 22RB’s match-grade barrel also comes prepared to accept a suppressor — the barrel threads are cut ot he proper spec for most popular .22 suppressors, and a mortise to accommodate the O-rings found on certain suppressor models is machined behind the threads. Read a Gear Report Here. Features/Specifications: Stainless Steel 14.5'' Match barrel, 1-16 Twist  Stainless Steel chamber Stainless Steel bolt carrier group LRBHO Function Muzzle Thread 1/2-28 UNEF M-LOK® Aluminum handguard NC-15 Aluminum forged AR-15 Mil-Spec Upper Receiver Including 10 round Black Dog Machine magazine Including Charging Handle Including NC Thread Protector Including Black Dog Machine .22 Bolt Saver for retaining bolt carrier group when upper is separate from lower Will accept all Black Dog Machine AR-15 .22 magazines and drums Informations: AT - Category B Including C.I.P.  Recommended for use with fire control groups using round hammers with mil-spec dimensions only Compatible with AR-15 Lower receiver according to Mil-Spec diameters Compatibel accessories, see under this article, accessories MADE IN THE USA

  High-Grade Semi-Auto AR-15 Rimfire Conversion Kit with Stainless Steel Barrel, Chamber and Stainless Steel Bolt Carrier Group. An AR22 offers an economical and effective way to improve your skills. It isn’t just practical—it’s also fun, making it a valuable and enjoyable tool for your arsenal. Nordic Components 22RB dedicated 22 upper receiver converts your standard AR-15 pattern lower to a dedicated .22LR for recreational shooting, training, and hunting. The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated .22 upper that looks and feels like a centerfire rifle. SUPPRESSOR READY! The 22RB’s match-grade barrel also comes prepared to accept a suppressor — the barrel threads are cut ot he proper spec for most popular .22 suppressors, and a mortise to accommodate the O-rings found on certain suppressor models is machined behind the threads. Read a Gear Report Here. Features/Specifications: Stainless Steel 18'' Match barrel, 1-16 Twist  Stainless Steel chamber Stainless Steel bolt carrier group LRBHO Function Muzzle Thread 1/2-28 UNEF M-LOK® Aluminum handguard NC-15 Aluminum forged AR-15 Mil-Spec Upper Receiver Including 10 round Black Dog Machine magazine Including Charging Handle Including NC Thread Protector Including Black Dog Machine .22 Bolt Saver for retaining bolt carrier group when upper is separate from lower Will accept all Black Dog Machine AR-15 .22 magazines and drums Informations: AT - Category B Including C.I.P.  Recommended for use with fire control groups using round hammers with mil-spec dimensions only Compatible with AR-15 Lower receiver according to Mil-Spec diameters Compatibel accessories, see under this article, accessories MADE IN THE USA

  High quality Complete Upper Receiver with Bolt Carrier Group and Charging Handle. This complete upper includes our new ATLAS R-ONE Handguard! The R-ONE handguards are designed with size and weight in mind, while still providing plenty of real-estate to accommodate any attachment needs the end user may have. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards. Includes: M4E1 Threaded Assembled Upper Receiver Included Phosphate BCG, with Chrome lined gas key and bolt channel Included Charging Handle  Included A2 flash hider ATLAS R-ONE M-LOK Handguard 8" .300 Blackout CMV Barrel Low Profile Gas Block and Pistol Length Gas Tube Product comes assembled M4E1 THREADED UPPER RECEIVER FEATURES: New enhanced forging that gives the upper receiver a "billet look" New picatinny profile that blends seamlessly with our Enhanced Series Handguards M4 Feedramps .250 takedown pin holes Laser engraved T-marks Includes port door and forward assist installed Finish: Magpul FDE Cerakote ATLAS R-ONE Handguard Features: Full top picatinny rail for optional attachments Quick disconnect sling socket at the 3, 6 and 9 o'clock positions Compatible with low profile gas blocks 1.3” Inside diameter 1.5” Outside diameter Compatible with mil-spec AR15 upper receivers and barrels Finish: Magpul FDE Cerakote 8" .300 Blackout Barrel Features: Length: 8" Twist: 1 in 7 Muzzle: 5/8x24 Threaded Material: 4150 Crome Moly Vanadium Finish: QPQ corrosion resistant finish both inside and out Gas Block: .750 Gas Port: .109 Gas System Length: Pistol Weight: 18oz M4 Barrel Extension HP and MPI Tested Informations: Included C.I.P. No pinned or welded Muzzle Device Compatible with AR-15 MIL-SPEC Lower Receivers  MADE IN THE USA

  Faxon Firearms set out to create a dependable and affordable 9mm PCC Upper that would be compatible with the widest range of 9mm PCC lowers and triggers. We’ve created the FX910-U featuring our 10” 9mm Tapered barrel, Gen 2 9mm Bolt Carrier Group, Enhanced Lightweight Gen2 Forged Upper Receiver and a 10” Aluminum handguard. The FX910-U is compatible with both Colt and Glock mag lower receivers and works with most binary triggers.  Specs: Caliber 9mm Luger Faxon 10" Light Tapered Barrel Muzzle Thread: 1/2-28 UNEF Faxon Enhanced Lightweight Gen2 Forged Upper Receiver 10" Lightweight Aluminum M-LOK Handguard Faxon Gen 2 9mm Bolt Carrier Group Include 9mm A2 flash hider Include charging handle Tested Lower: ANGSTADT ARMS, ANDERSON, AERO PRECISION GLOCK® 9mm Lower Receiver LRBHO function, depending on the choice of lower receiver or magazine adapter used Compatibel accessories, see under this article, accessories  Informations:  Included C.I.P.MADE IN THE USA