SPRINCO AR-15 Standard Power Buffer Spring GREEN - Rifle Length

Standard Power - Rifle Length - Buffer Spring

The Green spring is for use in A1 / A2 fixed stock rifle length buffer tubes with rifle length buffers. It is also extremely popular in intermediate depth (7.75 “ deep) VLTOR A5 buffer tubes with 4” A5 buffers.

The spring design loads of the Green spring are those of a BRAND NEW mil-spec buffer spring. While the Green spring is primarily for use with lesser calibers such as .223, 5.56. 6.8 SPC, 6.5 Grendel, 7.62 X 39, etc. in A2 rifle length tubes, it may sometimes be appropriate for use in long BBL (20”+) rifle length gas BBL’s in heavier calibers such as .308 and 6.5 CM, .260 Rem, etc.. (May not be effective for unsuppressed 7.62 X 51) In the latter scenario, an H2 or H3 carbine buffer has been used successfully in rifle length tubes with the Green spring. Over gassed heavier caliber guns with rifle length tubes may be addressed with our Red or Orange carbine springs and standard length 3.25” carbine buffers along with a spacer to yield the appropriate tube depth for the longer BCG’s. Color Coded GREEN.

Features:

• Standard Power Rifle Length Buffer Spring
• Compatible to AR-15 with rifle lenght gas system and rifle length buffers
• Possibly compatible to AR-10 (20”+ barrel) normal gassed guns with rifle lenght gas system in conjunction with H2 or H3 carbine buffer (May not be effective for unsuppressed 7.62 X 51)
• NOTE: Overgassed AR-10 guns with rifle length tubes may be addressed with our Red or Orange carbine springs and standard length 3.25” carbine buffers along with a spacer!
• Compatible for VLTOR A5 buffer tubes (7.75 “ deep) with 4” A5 buffers. 
• Made from chrome silicon wire stock
• Heat treated and shot peened
• Compatible accessories see under this article, accessories.

Check your rifle with the Ejection Angle Chart 

_____________________________________________________________________________________________________________________________________________________________________________________________

General Informations

Why do we assign "COLORS" to our buffer springs? We have tens of thousands of buffer springs in various stages of enhancement or in inventory in our facility. This practice is beneficial to both you as the end user and for our employees to identify for quality control and fulfillment. We use Dykem® Opaque Metal Staining Dye to color code the springs, (not rattle can spray paint) during the QC and packaging process. This practice has become the standard industry reference for our different springs. Should you encounter fishy looking deals on internet auction sites, please send us an image for product validation, as there have been a very small intrusion of color coded imposters floating around from time to time that to the trained eye, are glaringly apparent from their advertising images and/or descriptions.

Sprinco buffer springs are made from high quality Chrome Silicon wire stock which is used in a variety of applications from Formula One to motor valve springs which can see up to 15,000,000 compression cycles in a single race. 

CONSTRUCTION SPECS: CARBINE & RIFLE BUFFER SPRINGS

• ASTM Grade A877 Certified Valve Quality Chrome silicon Wirestock
• Heat Treated, Stress Relieved and Dual Stage Shot-Peened post winding (Our springs really ARE shot-peened)
• Impregnation / Plating with Re-Micronized Molybdenum Disulfide formulation
• Hard plastic tube packaging for protected transport and easy storage (Tubes make great storage compartments for all sorts of gear)
• Optional Cryogenic Processing Available (Select Item 26001)

ADVANTAGES:

• Increased "lock time" for faster sight recovery and platform stability
• Consistent spring pressure throughout the duty cycle of the spring, resulting in fewer malfunctions related to spring operation (Especially Type III malfunctions)
• Improved & consistent cyclic operation. Spring will not change performance for many hundreds of thousands of rounds
• Greater resistance to heat induced performance degradation
• Reduced cyclic rate with Enhanced or Extra Power springs and reduce / eliminate bolt bounce with optimal spring / buffer weight selection
• Reduced operating cost as replacement springs are not needed during the life of your upper receiver assembly. Less downtime and fewer trips to the armorer for spring replacement, in fact, this will most likely be the only buffer spring you will ever need for the duty cycle of your carbine or rifle!
• Correct spring selection works reliably, consistently, and virtually indefinitely in all properly built and maintained AR platforms

MADE IN THE USA

Subject to printing errors and changes. Our product pictures and item descriptions are protected by copyright. Any further use without our consent constitutes a copyright infringement in accordance with § 86 of the Copyright Act.